Hi guys, I'm trying to install xposed but using the latest version doesn't seem to work. It successfully installs in recovery but then, once in Android, it says it's not yet compatible. I've seen lot of you have installed and managed to have it working. Could you please tell me which version you used? And how you installed it. Thanks
What ROM are u on?
http://bit.ly/2b6tR8R
Check out this post
Pphish20 said:
What ROM are u on?
Click to expand...
Click to collapse
Rooted stock 10d
[email protected] said:
http://bit.ly/2b6tR8R
Check out this post
Click to expand...
Click to collapse
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
SpH1nX said:
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
Click to expand...
Click to collapse
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
gwolfu said:
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
Click to expand...
Click to collapse
rovo89 officially stated that the next version will be systemless
Regarding installer, have I to mandatory use material design version or I can stay with the official one? Is it compatible?
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
danroger said:
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
Click to expand...
Click to collapse
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
SpH1nX said:
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
Click to expand...
Click to collapse
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
gwolfu said:
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Click to expand...
Click to collapse
Official zip with material design version? Does it work?
SpH1nX said:
Official zip with material design version? Does it work?
Click to expand...
Click to collapse
using it since more then half a year already, so rest assures it's working
check thread I submitted for more info in case of doubts
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
[email protected] said:
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
SpH1nX said:
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
Click to expand...
Click to collapse
Just try it
A friend of mine also ran into some issues like yours on the official app but as with your case he tried the material one and worked wonders
Also if you run the material version you are also as close to stock as possible since this is compiled from official sources but only a few visual changes made to the app
Dont work at mine H850
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
Could you please tell framework and installer versions?
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
gwolfu said:
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
Click to expand...
Click to collapse
Done. Get System UI Force Close every Time.
SpH1nX said:
Could you please tell framework and installer versions?
Click to expand...
Click to collapse
Latest Material Installer and Systemless v86.3 and v86.4.
Tried official v86 too
I can confirm that official framework works fine with material design installer. That's the only combination that's working on my G5. Haven't tried systemless version.
Related
Here is the older versions of these 3 frameworks & Snapchat all of them work just install & enjoy
Snapchat - http://www.mediafire.com/download/8f4ufl6kdu67yoz/com.snapchat.android_404.apk
Keepchat - http://www.mediafire.com/download/8fc8a0586td9sqn/com.ramis.keepchat_55.apk
Snapshare - http://www.mediafire.com/download/wk87deon0y47a5j/com.p1ngu1n.snapshare_20.apk
Snapchat Full Caption - http://www.mediafire.com/download/t21flogvv5ds5wu/com.elesbb.snapchatfullcaption_1.apk
1st. Uninstall Snapchat then re-install by downloading the APK once done go to Snapchat in the Store & click settings uncheck mark auto update
2nd. Install all frameworks then go into Xposed turn them on reboot & enjoy
FIX TO DOWNGRADE
Install Xposed Xinstaller - Reboot
Install newset version of Snapchat
Xinstaller - Installations - Downgrading apps
then install any version of Snapchat just install it over the new Snapchat
EVERYTHING WORKS I don't like stories I think it's stupid
Reason why I have these cause I broke my phone 2 weeks before Thanksgiving & yesterday I just now fixed it S3.... 3/10 yesterday I had a OLDER 14 backup ROM & finally figured out how to flash it so now I'm able to give you guys the Snapchat Full Caption enjoy
............
Respect to the Dev that put in the work for these Snapchat mods
...
Thank you. Was just looking for these and realized they went on exposed anymore
You linked very old versions of modules.
Here there are newest avaible modules and Snapchat witch works with them: https://www.reddit.com/r/xposed/comments/2vilhh/cant_find_snapshare_or_keepchat_anymore/
Pacjonek said:
You linked very old versions of modules.
Here there are newest avaible modules and Snapchat with work with them: https://www.reddit.com/r/xposed/comments/2vilhh/cant_find_snapshare_or_keepchat_anymore/
Click to expand...
Click to collapse
okay....I was about to install but it sucks up data
astonmartin214 said:
okay
Click to expand...
Click to collapse
There's a link in the top comment to download the latest versions.
astonmartin214 said:
okay
Click to expand...
Click to collapse
In my bottom link you can find newest versions
I don't add it here on XDA because mods could delete links
geoff5093 said:
There's a link in the top comment to download the latest versions.
Click to expand...
Click to collapse
Thanks I'll check it out if I don't like it I'll go back to the old version &b I read the comments that it sucks up data & there's feature called discover on here
Does this work on Lollipop?
Talal916 said:
Does this work on Lollipop?
Click to expand...
Click to collapse
That's a big fat negative. The actual Xposed framework needed to make all of these things work is currently incompatible with Lollipop Android 5.0. It is in development however so keep checking for information on Xposed for Lollipop and with any luck, you'll be in business soon.
anonanonymous said:
That's a big fat negative. The actual Xposed framework needed to make all of these things work is currently incompatible with Lollipop Android 5.0. It is in development however so keep checking for information on Xposed for Lollipop and with any luck, you'll be in business soon.
Click to expand...
Click to collapse
Got released yesterday... Stay informed before giving away advice..
patrickpetersen said:
Got released yesterday... Stay informed before giving away advice..
Click to expand...
Click to collapse
Keepchat works in 100%. (v. 4.3.0 with Snapchat v.9.20)
Unfortunately Snapshare is not. Some additional features work (e.g unlimited text area) but when you try to share something you get error "Snapshare is not enabled. Please enable it in Xposed Installer(Snapshare is enabled in Xposed Installer)."
I belive it can be a small thing that needs to be improved to work with Lolipop.
Snapshare has been open-source software. Where is the code?
If PirateBay can survive, Snap hacks will also.
patrickpetersen said:
Got released yesterday... Stay informed before giving away advice..
Click to expand...
Click to collapse
Yes it go released but you need to stay informed it's Alpha build so a lot of frameworks won't work anyway
XDA News just posted this http://www.xda-developers.com/xposed-modules-to-install-right-now-on-lollipop/
Pacjonek said:
Keepchat works in 100%. (v. 4.3.0 with Snapchat v.9.20)
Unfortunately Snapshare is not. Some additional features work (e.g unlimited text area) but when you try to share something you get error "Snapshare is not enabled. Please enable it in Xposed Installer(Snapshare is enabled in Xposed Installer)."
I belive it can be a small thing that needs to be improved to work with Lolipop.
Snapshare has been open-source software. Where is the code?
If PirateBay can survive, Snap hacks will also.
Click to expand...
Click to collapse
actually no cause if you look up both Snap & Keep hacks the creator clearly states that Snapchat has actively blocked the hacks & he had the code & repo pulled so no further development can be had....that's why you don't see it on Xposed site or app
Snapmod works on lollipop with or without xposed installed.
ElDuez said:
Snapmod works on lollipop with or without xposed installed.
Click to expand...
Click to collapse
Yea that Snapmod has been closed down also been pulled from Xposed
ElDuez said:
Snapmod works on lollipop with or without xposed installed.
Click to expand...
Click to collapse
HEY can I get the apk for the snapmod so I can use unlimited text
geoff5093 said:
There's a link in the top comment to download the latest versions.
Click to expand...
Click to collapse
Just added Snap Full caption to OP
lances1027 said:
Thank you. Was just looking for these and realized they went on exposed anymore
Click to expand...
Click to collapse
Just added Snapchat Full caption
ElDuez said:
Snapmod works on lollipop with or without xposed installed.
Click to expand...
Click to collapse
just added Full Caption
Pacjonek said:
Keepchat works in 100%. (v. 4.3.0 with Snapchat v.9.20)
Unfortunately Snapshare is not. Some additional features work (e.g unlimited text area) but when you try to share something you get error "Snapshare is not enabled. Please enable it in Xposed Installer(Snapshare is enabled in Xposed Installer)."
I belive it can be a small thing that needs to be improved to work with Lolipop.
Snapshare has been open-source software. Where is the code?
If PirateBay can survive, Snap hacks will also.
Click to expand...
Click to collapse
just added full caption
SBXposed bypasses the Xposed restriction in the Sparkasse(+) App.
Requirements
- Xposed Framework
- Sparkasse / Sparkasse+ app at least version 3.0.0
- Android 4.4+
Usage
1. Install SBXposed
2. Activate module in XposedInstaller
3. Reboot
4. Have fun with unblocked app.
Download
You can download the mod via XposedInstaller or directly from Repository: repo.xposed.info/module/tmh.sbxposed
Github: https://github.com/tmhzxy/SBXposed
Support
The module was tested by me on latest CM13 nightly for the latest version of the app. It should be working fine on other ROMs.
Please leave feedback with an Xposed log and the apk from Sparkasse(+) app if not working, so I can take a look at it.
I will not add any new features. This module is only for skipping the Xposed / partial root restriction.
Changelog
1.0: Initial module.
1.1: Fix min. XposedBridge version to 53 for Kitkat.
Works like a charm on Sultans latest cm13 (op3) with xposed and Sparkasse+! Thank you very much!
Works pefectly. I knew this Module would come. Like i statet in my Playstore Review. Thank you very much.
I can run the Sparkasse+ app v3.0.0 without this module. And I have Xposed installed, of course. Why do you need it?
Won't work for me
Hi there,
is there any possibilty for me to activate this app under xposed v.2.6.1? The module keeps telling my xposed is too old (though there are no updates available for me).
Galaxy Note 4, Stock 4.4.4
meiser said:
I can run the Sparkasse+ app v3.0.0 without this module. And I have Xposed installed, of course. Why do you need it?
Click to expand...
Click to collapse
Meanwhile, Xposed detection is installed. Unfortunately, the detection works at most, so I created the module. If this is not the case, your setup would interest me.
Musikologin said:
Hi there,
is there any possibilty for me to activate this gem under xposed v.2.6.1? The module keeps telling my xposed is too old (though there are no updates available for me).
Galaxy Note 4, Vanilla 4.4.4
Click to expand...
Click to collapse
New version published. Should work now.
Thank you! Works great!
@tmh_: Dude i love you ?
Sent from my LG-D855 using XDA Labs
tmh_ said:
Meanwhile, Xposed detection is installed. Unfortunately, the detection works at most, so I created the module. If this is not the case, your setup would interest me.
Click to expand...
Click to collapse
I'm running CM 13.0 nightly (latest version from 2016/11/07) on a OnePlus3, I installed SuperSU 2.78 SR5, suhide 0.55 and seamless Xposed 86.1 by romracer.
tmh_;69867331
New version published. Should work now.[/QUOTE said:
Thank you for your quick update! Unfortunately it still won't work - module is installed and activated via xposed, but after a reboot my sparkasse app (which I have uninstalled and reinstalled again) still thinks I'm a dangerous criminal or whatever... still detects my installed xposed framework.
(BTW cloak root module wouldn't work either.)
Maybe I will just stick with version 2.9.1 as long as possible.
Update: I tried same thing with my daughter's z1 compact running CM11. It doesn't work here either - so it has probably something to do with kitkat roms, no matter if stock or custom.
I'm too old fashioned, can't say goodbye to kitkat...
Click to expand...
Click to collapse
Musikologin said:
tmh_;69867331
New version published. Should work now.[/QUOTE said:
Thank you for your quick update! Unfortunately it still won't work - module is installed and activated via xposed, but after a reboot my sparkasse app (which I have uninstalled and reinstalled again) still thinks I'm a dangerous criminal or whatever... still detects my installed xposed framework.
(BTW cloak root module wouldn't work either.)
Maybe I will just stick with version 2.9.1 as long as possible.
Click to expand...
Click to collapse
I need the Xposed log to understand the error.
Click to expand...
Click to collapse
tmh_ said:
I need the Xposed log to understand the error.
Click to expand...
Click to collapse
Sure, it says:
SBXposed: Try to find protect classes...
SBXposed: 1 classes found
Nothing more I can find related to this module.
Musikologin said:
Sure, it says:
SBXposed: Try to find protect classes...
SBXposed: 1 classes found
Nothing more I can find related to this module.
Click to expand...
Click to collapse
I have built a version in which more things are logged. This logging is explicit only for Android <5.0 and only for debugging, as this is a performance loss.
After testing app, I need the complete Xposed log.
tmh_ said:
I have built a version in which more things are logged. This logging is explicit only for Android <5.0 and only for debugging, as this is a performance loss.
After testing app, I need the complete Xposed log.
Click to expand...
Click to collapse
I really appreciate your effort!
My request now is somewhat embarrassing *cough*:
How exactly do I extract an apk file from the attached zip?
After unzipping all I I get is a bunch of folders and for me rather uncommon file types.
Musikologin said:
I really appreciate your effort!
My request now is somewhat embarrassing *cough*:
How exactly do I extract an apk file from the attached zip?
After unzipping all I I get is a bunch of folders and for me rather uncommon file types.
Click to expand...
Click to collapse
The attachment is the apk. Sometimes the apk may be opened by a program as a zip file.
tmh_ said:
The attachment is the apk. Sometimes the apk may be opened by a program as a zip file.
Click to expand...
Click to collapse
Although it's named apk, it's only shown as a zip file after the download. On my Windows device as well as on my smartphones. I can only flash zips on my phone but that's probably not the way it should work.
Edit: The download via QR worked. I will test it and tell you. Tomorrow. Short baby night ahead .
Thank you!
Thanks man, works flawlessly on my Note 4 with 6.0.1
Thanks, i first used my old sparkasse app from titanium backup until i saw this modul.
Works as expected, thanks for your work.
Works as expected. Great! And thanks [emoji122] [emoji122] [emoji122]
Sent from my XT1562 using XDA-Developers mobile app
Thank you for sharing the module, works just fine. I don't understand how Sparkasse can block everyone out using Xposed...
Hi,
Thought i make a flashable zip for our device based on @ZaneZam 's iYTB to get YouTube without those ANNOYING ADDS....
Latest time it became tooooooo much, even minute after minute.....!
Therefore this zip.
LINK : https://androidfilehost.com/?fid=962021903579484937
LINK update based on 20.12.2017 (v12.49.55) : https://androidfilehost.com/?fid=890129502657578397
LINK update based on 17.05.2018 (v13.18.54) : https://androidfilehost.com/?fid=674106145207489463
LINK update based on 10.06.2018 (v13.22.54) : https://androidfilehost.com/?fid=746163614322270159
It's the BLACK THEMED version.
Procedure :
1. Put on extSD
2. wipe cache/dalvik
3. Flash
4. reboot (if it does not show up on first boot, REBOOT again)
5. in playstore/settings : check "no auto update" , otherwise you'll end up as before !
This zip should work when your youtube is in system/app or data/app. Both will be wiped and replaced with the new one.
Report when zip isn't working anymore. Therefore i should update the zip with the latest version.
ALL CREDITS : @ZaneZam and all others !!!!THNX!!!:good::good::good:
ENJOY !
don't just HIT&RUN....there's a :good: button for some reason
ps : this should normally work for ALL VERSIONS
What is the difference to ZaneZam ???
The original one works perfect ???
Glad to see this. I've tried the original installer with the black YT but it always failed (using the place in download directory method). Installation of the non-themed version worked fine. Could've just renamed the black version to match but didn't feel like it.
Kudos to you for this.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Original works perfect on g version, so the other versions got issues ??? They updated the installer in September, may that's why ???
coremania said:
Original works perfect on g version, so the other versions got issues ??? They updated the installer in September, may that's why ???
Click to expand...
Click to collapse
No issues my friend, relax
It's just a twrp zip for our flashaholic-souls :cyclops:
And it's a bit less handling than the universal installer or the manual method...you don't have to rename, set permissions, or whatever you have to do in the OP from iYTB. My method : just download and flash and you know it'll be ok !
I just molded it a bit for the A7 that's all :good:
raystef66 said:
No issues my friend, relax
It's just a twrp zip for our flashaholic-souls :cyclops:
And it's a bit less handling than the universal installer or the manual method...you don't have to rename, set permissions, or whatever you have to do in the OP from iYTB. My method : just download and flash and you know it'll be ok !
I just molded it a bit for the A7 that's all :good:
Click to expand...
Click to collapse
Totally relaxed here, I was just curious, because I never had any issues.
On n6p, n7 and axon 7 it always works as described.
Installer and apk in one folder and good to go.
coremania said:
On n6p, n7 and axon 7 it always works as described.
Installer and apk in one folder and good to go.
Click to expand...
Click to collapse
Was that with the black YT? That's where I had a problem. The universal installer would always fail to install them. No problems with installing the non-themed apks.
Never bothered to check why though.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
marcdw said:
Was that with the black YT? That's where I had a problem. The universal installer would always fail to install them. No problems with installing the non-themed apks.
Never bothered to check why though.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
Yes, i always flash the black root version, no issue.
On my axon 7 rooted with magisk, btw.
Is there any benefit in using this over something like NewPipe?
NadavCE said:
Is there any benefit in using this over something like NewPipe?
Click to expand...
Click to collapse
Definitely, as this is the real YouTube with enhancements.
See the OP here.
http://forum.xda-developers.com/showthread.php?t=3560900
[APP][MOD] iYTBP - original YouTube app with background playback and removed ads
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Use Magisk to install the original and not TWRP.
Zip isn't working
Dodgexander said:
Zip isn't working
Click to expand...
Click to collapse
It is
When app doesn't appear on 1st boot, just reboot again.
Does this zip also removes currently installed youtube version from your phone?
Predatorhaze said:
Does this zip also removes currently installed youtube version from your phone?
Click to expand...
Click to collapse
Yes it does :good:
Hey I just happened to get a ZTE Axon 7 today and am also a dev of iYTBP lol. I can confirm the latest official works perfectly on this phone
raystef66 said:
Yes it does :good:
Click to expand...
Click to collapse
thanks bro,i really like this one!! great work,no bugs when playing in background.
btw can i flash this on stock firmware?without twrp...i just hate the original youtube
does this app get updates? the magisk version got more functions if im not wrong
Predatorhaze said:
does this app get updates? the magisk version got more functions if im not wrong
Click to expand...
Click to collapse
This one doesn't get updates. I ran it for ages and no problems so far. To which more functions do you refer?
If you want i can make a new one with the latest in it. But basically no big differences imo.
raystef66 said:
This one doesn't get updates. I ran it for ages and no problems so far. To which more functions do you refer?
If you want i can make a new one with the latest in it. But basically no big differences imo.
Click to expand...
Click to collapse
IYTB (vanced magisk?) on Oreo rom is able to have a floating window on top of other apps you use ate the same time,and it got a new minimize style.Only the floating window feature is a big ++ for me.I prefer IYTB as system app,and not a magisk module.
Sup guys! I was finally able to find time to convert my previous patch for EPM to an Xposed module! This was not as simple as I expected, as it required dynamic XML generation/integration, which can be cumbersome to say the least. I tried to keep the code as generic as possible to support other models of the A2017, but there are no guarantees beyond the US model. I did add a configurable option to add a bootloader button, but as of this posting (B32), ZTE has disabled this functionality.
FAQ:
1. Can you add support for my model?
- Possibly, but at the minimum you would need to post your framework-zte-res.apk. Specifically, the files layout/global_dialog.xml and layout-land/global_dialog.xml are needed.
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
Thanks to wanam for the simple settings popup and apsun for the RemotePreferences library.
Xposed page: http://repo.xposed.info/module/com.none.epm_zte
very cool that you did a "port", have my thanks - even when I'm not running stock most of the time
Works xposed in Mifavor? 4.x or 5.0?
BaamAlex said:
Works xposed in Mifavor? 4.x or 5.0?
Click to expand...
Click to collapse
Only tested on B32 thus far, which runs MiFavor 4.2.
Works on Sl!m M!Favor 5.0 / 7.1.1 v 2.0. (A2017G).
Thanks man! Your the greatest! Any chance you can add the 3minit battery mod like last time
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Teet1 said:
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Click to expand...
Click to collapse
There's an Xposed magisk module tho
Choose an username... said:
There's an Xposed magisk module tho
Click to expand...
Click to collapse
It still breaks safetynet
Teet1 said:
It still breaks safetynet
Click to expand...
Click to collapse
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
bkores said:
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
Click to expand...
Click to collapse
Not worth it if i have to reboot my phone when I want to play games that require safetynet and use banking every time oh well, can't have all the pleasures in the world, but it would be nice to have this as a magisk module.
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Choose an username... said:
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Click to expand...
Click to collapse
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Ah bummer. I was hoping to use this module but I'm running v87 Xposed (PurifyOS). EPM requires v88.x. I'm only on unofficial Xposed because Unicon works with it.
If I decide I don't need Unicon I'll definitely update and use EPM.
At the moment I'm using one of the many reboot menu utilities to popup on double press of the back button (using Button Mapper).
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
jeboo said:
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Click to expand...
Click to collapse
I can confirm that this works on stock A2017G B09 with flashable Xposed. may also work with topjohnwu's Xposed but I couldn't manage to make the modded xposed installer find the xposed installation
The ROM is stock B09, from raystef66's flashable zips
Here's a screenshot where you can barely see the model below
So basically you can add that it's compatible with G-B09 somewhere
jeboo said:
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
[/URL]
Click to expand...
Click to collapse
Works on MF5.0 too (either SuperSu or Magisk). Only if you use the flashable xposed framework v88.2 SDK25 + xposed installer + your apk.
Thnx ! (does not work through Magisk module installing the framework. Installer error framework not installed)
works on B35
Works on B09 Nougat on A2017G, although it does not play nice when messing with screen dpi. I am currently on 500 and icons are misaligned.
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
N1ghtr08d said:
I used to use Xposed but I can't think of any modules that are worth bothering with the install these days. Can you recommend anything worthwhile bro?
Click to expand...
Click to collapse
I actually only use a package for greenify and a "Eventlock" module to get my calendar data on the lockscreen
Yeah, that's the problem for me. Xposed used to be about to do so much that Android couldn't but the OS has come so far now that I don't feel the need for it anymore.
Sent from my G8341 using Tapatalk
Yeeea.....bur I just had to check it out when I saw there is a beta version of Xposed for Oreo.
Just because I'm curious
I know, I feel the same way but just didn't see the benefit of it at the time. I used to love Xposed. I actually forgoe certain upgrades because I would lose Xposed in the past. Those days are gone now though.
For all who are intrested:
Gravity Box for Oreo is now released!
I think the best XPosed Modul on the Repository!
pergoteborg said:
For those interested we can now run XPosed on XZ1
Me myself I have FW 47.1.A.12.34
Install the DRMFix according to post 53 in the [oreo]XZ1-drmfix-root-ricoff. This gives me recovery, root and DRMFix.
Then I downloaded and flashed installed XPosed and the installer from the [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo thread
SDK for OREO 8.0 (which is the version in FW 47.1.A.12.34) is SDK26 and the architecture is Arm64.
I Flashed the XPosed zip, booted phone and installed the XposedInstaller apk. The app then told me the framework was installed but not loaded, so I istalled it once more from the app (direct install, not using recovery). After reboot did everything work as a charm
Click to expand...
Click to collapse
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
pepe_k said:
I have the same problem with Xposed on FW 47.1.A.12.179 with SDK26 v. 90-beta 3 but workaround doesn't work.
Click to expand...
Click to collapse
Same here... It's sad to see there is nothing to do but waiting
TurkO546 said:
Same here... It's sad to see there is nothing to do but waiting
Click to expand...
Click to collapse
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Thanks for the report. If you know about a fix when it's available, please share the info.
Castiglionais said:
Same problem, on my xperia xz premium .179, xposed doesn't work since .75,
I try for a week...trying all solutions, nothing works, xposed installer tells me that xpoed is installed but doesn't work.
waiting for solutions from @rovo89 :good:
Click to expand...
Click to collapse
Yes @rovo89 Please help!
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "Statusbar Download Progress" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
snake218 said:
Yes, very good news. How did you solve bootloop? Did you flash a unistall zip from twrp?
Click to expand...
Click to collapse
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
TurkO546 said:
I tried to install Beta 2 to my G8341 and the phone booted (.179 firmware)
I tried to install simple modules like "statusbar download process" and it is activated.
but installing gravitybox caused bootloop
that's weird and good news guys
Click to expand...
Click to collapse
I'll try this tutorial, i'll give feedback later, thanks
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
monsieurlezard said:
i confirm Xposed beta 2 working on fw .179 (G8342 dual)
GravityBox caused bootloops...
Click to expand...
Click to collapse
Pls gimme a downlaod link of beta 2 can't find it on internet.
pw1nce said:
Pls gimme a downlaod link of beta 2 can't find it on internet.
Click to expand...
Click to collapse
https://dl-xda.xposed.info/framework/sdk26/arm64/
TurkO546 said:
1- uninstalled xposed via twrp
2- booted
3- uninstalled the module
4- installed beta 2 again and xposed working now
battery care+ also working
Click to expand...
Click to collapse
Beta 2 activated but when i install a mod my device going to bootloop