Hi,
Thought i make a flashable zip for our device based on @ZaneZam 's iYTB to get YouTube without those ANNOYING ADDS....
Latest time it became tooooooo much, even minute after minute.....!
Therefore this zip.
LINK : https://androidfilehost.com/?fid=962021903579484937
LINK update based on 20.12.2017 (v12.49.55) : https://androidfilehost.com/?fid=890129502657578397
LINK update based on 17.05.2018 (v13.18.54) : https://androidfilehost.com/?fid=674106145207489463
LINK update based on 10.06.2018 (v13.22.54) : https://androidfilehost.com/?fid=746163614322270159
It's the BLACK THEMED version.
Procedure :
1. Put on extSD
2. wipe cache/dalvik
3. Flash
4. reboot (if it does not show up on first boot, REBOOT again)
5. in playstore/settings : check "no auto update" , otherwise you'll end up as before !
This zip should work when your youtube is in system/app or data/app. Both will be wiped and replaced with the new one.
Report when zip isn't working anymore. Therefore i should update the zip with the latest version.
ALL CREDITS : @ZaneZam and all others !!!!THNX!!!:good::good::good:
ENJOY !
don't just HIT&RUN....there's a :good: button for some reason
ps : this should normally work for ALL VERSIONS
What is the difference to ZaneZam ???
The original one works perfect ???
Glad to see this. I've tried the original installer with the black YT but it always failed (using the place in download directory method). Installation of the non-themed version worked fine. Could've just renamed the black version to match but didn't feel like it.
Kudos to you for this.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Original works perfect on g version, so the other versions got issues ??? They updated the installer in September, may that's why ???
coremania said:
Original works perfect on g version, so the other versions got issues ??? They updated the installer in September, may that's why ???
Click to expand...
Click to collapse
No issues my friend, relax
It's just a twrp zip for our flashaholic-souls :cyclops:
And it's a bit less handling than the universal installer or the manual method...you don't have to rename, set permissions, or whatever you have to do in the OP from iYTB. My method : just download and flash and you know it'll be ok !
I just molded it a bit for the A7 that's all :good:
raystef66 said:
No issues my friend, relax
It's just a twrp zip for our flashaholic-souls :cyclops:
And it's a bit less handling than the universal installer or the manual method...you don't have to rename, set permissions, or whatever you have to do in the OP from iYTB. My method : just download and flash and you know it'll be ok !
I just molded it a bit for the A7 that's all :good:
Click to expand...
Click to collapse
Totally relaxed here, I was just curious, because I never had any issues.
On n6p, n7 and axon 7 it always works as described.
Installer and apk in one folder and good to go.
coremania said:
On n6p, n7 and axon 7 it always works as described.
Installer and apk in one folder and good to go.
Click to expand...
Click to collapse
Was that with the black YT? That's where I had a problem. The universal installer would always fail to install them. No problems with installing the non-themed apks.
Never bothered to check why though.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
marcdw said:
Was that with the black YT? That's where I had a problem. The universal installer would always fail to install them. No problems with installing the non-themed apks.
Never bothered to check why though.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
Yes, i always flash the black root version, no issue.
On my axon 7 rooted with magisk, btw.
Is there any benefit in using this over something like NewPipe?
NadavCE said:
Is there any benefit in using this over something like NewPipe?
Click to expand...
Click to collapse
Definitely, as this is the real YouTube with enhancements.
See the OP here.
http://forum.xda-developers.com/showthread.php?t=3560900
[APP][MOD] iYTBP - original YouTube app with background playback and removed ads
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Use Magisk to install the original and not TWRP.
Zip isn't working
Dodgexander said:
Zip isn't working
Click to expand...
Click to collapse
It is
When app doesn't appear on 1st boot, just reboot again.
Does this zip also removes currently installed youtube version from your phone?
Predatorhaze said:
Does this zip also removes currently installed youtube version from your phone?
Click to expand...
Click to collapse
Yes it does :good:
Hey I just happened to get a ZTE Axon 7 today and am also a dev of iYTBP lol. I can confirm the latest official works perfectly on this phone
raystef66 said:
Yes it does :good:
Click to expand...
Click to collapse
thanks bro,i really like this one!! great work,no bugs when playing in background.
btw can i flash this on stock firmware?without twrp...i just hate the original youtube
does this app get updates? the magisk version got more functions if im not wrong
Predatorhaze said:
does this app get updates? the magisk version got more functions if im not wrong
Click to expand...
Click to collapse
This one doesn't get updates. I ran it for ages and no problems so far. To which more functions do you refer?
If you want i can make a new one with the latest in it. But basically no big differences imo.
raystef66 said:
This one doesn't get updates. I ran it for ages and no problems so far. To which more functions do you refer?
If you want i can make a new one with the latest in it. But basically no big differences imo.
Click to expand...
Click to collapse
IYTB (vanced magisk?) on Oreo rom is able to have a floating window on top of other apps you use ate the same time,and it got a new minimize style.Only the floating window feature is a big ++ for me.I prefer IYTB as system app,and not a magisk module.
Related
This form is to help understand how to install Xposed Installer and also which modules work and which ones don't. Lets mod this bad boy... Finally!
1. Go here http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
2. Download xposed-v71-sdk22-arm-by-romracer-20150816.zip (not arm64 or x86) (the 4th one down)
3. Go here http://forum.xda-developers.com/showthread.php?t=3034811
4. Download XposedInstaller_3.0_alpha4.apk (2nd one down)
5. Reboot into TWRP Recovery
6. Click Install
7. Locate xposed-v71-sdk22-arm-by-romracer-20150816.zip and install (you should see no red lined error messages during install)
8. Reboot Phone
9. Locate XposedInstaller_3.0_alpha4.apk and Install.
10. Enjoy
Working Modules
1. GravityBox [LP] v5.1.4
2. YouTube AdAway
3. Greenify
4. CM Settings (for call recorder)
Not Working Modules
reserved
reserved
reserved again
reserved again
Thanks! Added to the index. I will try this out myself. I suggest putting "[GUIDE]" at the beginning of the thread title so people know this is a guide and not a question.
If there could be a thread for installing Viper, or maybe somehow shoehorn it in here making this a CyanogenMod modding guide thread for our phone, that'd be awesome!
ScoobSTi said:
Thanks! Added to the index. I will try this out myself. I suggest putting "[GUIDE]" at the beginning of the thread title so people know this is a guide and not a question.
If there could be a thread for installing Viper, or maybe somehow shoehorn it in here making this a CyanogenMod modding guide thread for our phone, that'd be awesome!
Click to expand...
Click to collapse
i cant seem to edit the thread title
superbass311 said:
i cant seem to edit the thread title
Click to expand...
Click to collapse
Edit the first post, then click the button that says "Go Advanced"
Screen FIlter isn't working. Keeps telling me to make sure it's enabled in Xposed installer and reboot. I've done those already.
I lost Xposed when I updated the latest CM and after flashing it again it still says its not installed *edit* got it back
Several members wanted one hand setting back. Anyone tried that module? I am sure they would appreciate it. And gloves mode. I know there are modules for both.
MikeyLee said:
I lost Xposed when I updated the latest CM and after flashing it again it still says its not installed *edit* got it back
Click to expand...
Click to collapse
How'd you get it back?
Moody66 said:
Several members wanted one hand setting back. Anyone tried that module? I am sure they would appreciate it. And gloves mode. I know there are modules for both.
Click to expand...
Click to collapse
I live in FL what's glove mode...
superbass311 said:
I live in FL what's glove mode...
Click to expand...
Click to collapse
That's Huawei's term for high sensitivity mode. So phone works well with gloves etc.
It was part of CM but I think it got removed. Never used it myself. Even though I now live in Ohio. Lol. Guess it's handy. Maybe for work gloves for people. Dunno.
superbass311 said:
I live in FL what's glove mode...
Click to expand...
Click to collapse
Moody66 said:
That's Huawei's term for high sensitivity mode. So phone works well with gloves etc.
It was part of CM but I think it got removed. Never used it myself. Even though I now live in Ohio. Lol. Guess it's handy. Maybe for work gloves for people. Dunno.
Click to expand...
Click to collapse
I'm in NY so during the winter it gets pretty brutal. Glove mode works wonders, but if your gloves are too bulky you'll still need to take them off for accurate taps.
Here is the video
https://www.youtube.com/watch?v=---Utv9QfZk&feature=youtu.be
There is also an official sdk from @rovo89. See http://forum.xda-developers.com/showpost.php?p=62604734&postcount=18 and http://forum.xda-developers.com/showpost.php?p=62637612&postcount=19
Which one is better suited for the MT2L03? @romracer's or @rovo89's?
iammudd said:
There is also an official sdk from @rovo89. See http://forum.xda-developers.com/showpost.php?p=62604734&postcount=18 and http://forum.xda-developers.com/showpost.php?p=62637612&postcount=19
Which one is better suited for the MT2L03? @romracer's or @rovo89's?
Click to expand...
Click to collapse
Rovo. As the original is not for 5.1 just 5.0.
Moody66 said:
Rovo. As the original is not for 5.1 just 5.0.
Click to expand...
Click to collapse
In that case, FYI, Rovo just released v74... http://forum.xda-developers.com/showpost.php?p=62760329&postcount=20
superbass311 said:
This form is to help understand how to install Xposed Installer and also which modules work and which ones don't. Lets mod this bad boy... Finally!
1. Go here http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
2. Download xposed-v71-sdk22-arm-by-romracer-20150816.zip (not arm64 or x86) (the 4th one down)
3. Go here http://forum.xda-developers.com/showthread.php?t=3034811
4. Download XposedInstaller_3.0_alpha4.apk (2nd one down)
5. Reboot into TWRP Recovery
6. Click Install
7. Locate xposed-v71-sdk22-arm-by-romracer-20150816.zip and install (you should see no red lined error messages during install)
8. Reboot Phone
9. Locate XposedInstaller_3.0_alpha4.apk and Install.
10. Enjoy
Working Modules
1. GravityBox [LP] v5.1.4
2. YouTube AdAway
3. Greenify
4. CM Settings (for call recorder)
Not Working Modules
Click to expand...
Click to collapse
If upgrading the ROM Xposed stops working ... :S
4l3x15 said:
If upgrading the ROM Xposed stops working ... :S
Click to expand...
Click to collapse
Cuz Xposed need be reinstalled as well.
Anybody else seeing that October 6th CyanogenMod isn't working with xposed?
Sent from my Ascend Mate 2 using Tapatalk
So after a lot of testing me and @walter79 found the best combination of apps to make Xposed work on Marshmallow.
Note:
- This has been tested on D855 with Xposed v80 but they should work also on other 6.0 systems, anyway make always a backup first.
- The downloaded zip must be flashed in recovery before installing Xposed and right after flashing stock rom.
- This is only for stock roms. Do not flash on Fulmics ROM as the support is built-in!
Xposed Requirements:
Version: v80 or later
Platform: ARM
SDK: 23
DOWNLOAD
xpirt | walter79
enjoy!
Wow!! This is brilliant i'm sure a lot of people will be glad to see this thread well done sir..:good:
Testing later.. Thanks :highfive:
@xpirt
Can you post which apps needed to be removed for it to work?
Thanks! Great work!
liamR said:
@xpirt
Can you post which apps needed to be removed for it to work?
Thanks! Great work!
Click to expand...
Click to collapse
no apps need removed.
Great work xpirit and walter79. Thnx for the time to spend guys to make the v30B compatible.
The Program "Messenger" Must be Stoped & The Program "Weather" must be stoped, after installing xposed !? And its many times very laggy and the screen freeze for seconds.
For Example Facebook, Instagram, Messenger are completly unusable......
dadonali said:
The Program "Messenger" Must be Stoped & The Program "Weather" must be stoped, after installing xposed !? And its many times very laggy and the screen freeze for seconds.
For Example Facebook, Instagram, Messenger are completly unusable......
Click to expand...
Click to collapse
this should be flashed right after you flash stock 30b.
Okay, absolutely clean flash and then your method? You have no Problems with FC'S oder Freezes?
dadonali said:
Okay, absolutely clean flash and then your method? You have no Problems with FC'S oder Freezes?
Click to expand...
Click to collapse
nop, we tested it and it gave no problems.
Works just fine even though I get weather fc.
Sent from my LG-D855 using XDA Free mobile app
sorry guys, yeah weather apps will FC. will reupload soon.
Thank you again
Great Job Guys. Thank u so much for the great job
any solution for the weather until the fixed zip is released
updated download link.. now everything should work fine.
note: you can flash this on top of your stock 30b rom, but it is highly recommended to flash on a clean install right after you've done the installation process.
thanks to @BySezerSimsek who provided weather fix.
Still weather FC
Duckscreen said:
Still weather FC
Click to expand...
Click to collapse
wipe cache/dalvik..
xpirt said:
wipe cache/dalvik..
Click to expand...
Click to collapse
Done it
Also Delete app data
Im going to reflash it
Duckscreen said:
Done it
Also Delete app data
Click to expand...
Click to collapse
can you post screen of directory /system/app/LGWeather?
@xpirt get back to fulmics ROM stop playing around...
(this was a joke [or wasn't it])
Sent from my LG-D855 using Tapatalk
Hi guys, I'm trying to install xposed but using the latest version doesn't seem to work. It successfully installs in recovery but then, once in Android, it says it's not yet compatible. I've seen lot of you have installed and managed to have it working. Could you please tell me which version you used? And how you installed it. Thanks
What ROM are u on?
http://bit.ly/2b6tR8R
Check out this post
Pphish20 said:
What ROM are u on?
Click to expand...
Click to collapse
Rooted stock 10d
[email protected] said:
http://bit.ly/2b6tR8R
Check out this post
Click to expand...
Click to collapse
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
SpH1nX said:
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
Click to expand...
Click to collapse
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
gwolfu said:
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
Click to expand...
Click to collapse
rovo89 officially stated that the next version will be systemless
Regarding installer, have I to mandatory use material design version or I can stay with the official one? Is it compatible?
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
danroger said:
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
Click to expand...
Click to collapse
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
SpH1nX said:
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
Click to expand...
Click to collapse
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
gwolfu said:
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Click to expand...
Click to collapse
Official zip with material design version? Does it work?
SpH1nX said:
Official zip with material design version? Does it work?
Click to expand...
Click to collapse
using it since more then half a year already, so rest assures it's working
check thread I submitted for more info in case of doubts
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
[email protected] said:
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
SpH1nX said:
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
Click to expand...
Click to collapse
Just try it
A friend of mine also ran into some issues like yours on the official app but as with your case he tried the material one and worked wonders
Also if you run the material version you are also as close to stock as possible since this is compiled from official sources but only a few visual changes made to the app
Dont work at mine H850
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
Could you please tell framework and installer versions?
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
gwolfu said:
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
Click to expand...
Click to collapse
Done. Get System UI Force Close every Time.
SpH1nX said:
Could you please tell framework and installer versions?
Click to expand...
Click to collapse
Latest Material Installer and Systemless v86.3 and v86.4.
Tried official v86 too
I can confirm that official framework works fine with material design installer. That's the only combination that's working on my G5. Haven't tried systemless version.
Hey guys, I have no idea what I'm doing, so I'm wondering if anyone else has compiled a flashable Aosp or near-aosp build of android 7.0? I'm currently on PureNexus, and I'm looking for a very minimal ROM as it's the only way to reduce the lag on this low memory device we all know and love (hate?). Thanks!
Sent from my ONEPLUS A3003 using Tapatalk
jaju123 said:
Hey guys, I have no idea what I'm doing, so I'm wondering if anyone else has compiled a flashable Aosp or near-aosp build of android 7.0? I'm currently on PureNexus, and I'm looking for a very minimal ROM as it's the only way to reduce the lag on this low memory device we all know and love (hate?). Thanks!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I'm 100% with you on this. Minimum is best. I was wondering where the homecooked 7.0s are too.
Way too soon for a stable aosp build.
You'll probably see a flashable, pre-rooted stock rom appear first. Often these are tweaked, debloated etc so can be quite minimal.
Experimental aosp builds will likely emerge soon too but if you're the type to moan about roms not appearing fast enough and the low memory of a device you bought then you likely won't like bugs either. Maybe wait for a bit.
I wanna post mine - but GApps FC (some location provider error) and I am looking for a fix. This commit didn't fix it and I thought it might!
https://github.com/bshiznit/platform_frameworks_base/commit/4f18c68e03b996dab5df4d586db9c9af5647445a
Anyway - if there is interest (and it looks like there is) I might post as WIP this evening...
bshiznit said:
I wanna post mine - but GApps FC (some location provider error) and I am looking for a fix. This commit didn't fix it and I thought it might!
https://github.com/bshiznit/platform_frameworks_base/commit/4f18c68e03b996dab5df4d586db9c9af5647445a
Anyway - if there is interest (and it looks like there is) I might post as WIP this evening...
Click to expand...
Click to collapse
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
USBhost said:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
Click to expand...
Click to collapse
Thanks! It's unclear from that if there is something I can cherry-pick, or what Any thoughs from a fellow dev?
@jaju123, @Jeff_in_LA, @astralbee, @USBhost threw my WIP build up under Android Development:
http://forum.xda-developers.com/nexus-9/development/rom-t3451480/
bshiznit said:
@jaju123, @Jeff_in_LA, @astralbee, @USBhost threw my WIP build up under Android Development:
http://forum.xda-developers.com/nexus-9/development/rom-t3451480/
Click to expand...
Click to collapse
Cool, thanks!
Jeff_in_LA said:
Cool, thanks!
Click to expand...
Click to collapse
You bet - just remember it is a work in progress
No worries. I appreciate all the hard work you did on this.
USBhost said:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
Click to expand...
Click to collapse
I got a bare bones up and working w/ Opengapps but I can't get root to work. Tried latest SuperSu but no go. It tries to install as systemless and then fails not sure why Never did that on my MM builds
@USBhost You see anything in my git repos??? Basically the same as my MM builds.
Attaching some twrp screenshots and recovery.log below.
If anyone can help it would be appreciated.
Thanks
fhem said:
I got a bare bones up and working w/ Opengapps but I can't get root to work. Tried latest SuperSu but no go. It tries to install as systemless and then fails not sure why Never did that on my MM builds
@USBhost You see anything in my git repos??? Basically the same as my MM builds.
Attaching some twrp screenshots and recovery.log below.
If anyone can help it would be appreciated.
Thanks
Click to expand...
Click to collapse
dont try v2.78 SR1
try only the v2.78
PS its not your fault
other ROMs have the same problem (the ones i tried)
USBhost said:
dont try v2.78 SR1
try only the v2.78
PS its not your fault
other ROMs have the same problem (the ones i tried)
Click to expand...
Click to collapse
Thanks but get same result --> I have attached another twrp recovery.log at bottom. It shows whats happening w/ su flash. I think LOL.
I had stock rooted but now am trying to get my aosp build up and running w/ no luck rooting. I am going to start over clean w/ fastboot stock w/o root and then try installing aosp rom and rooting.
I am also having the problem w/ twrp unhooking sometimes --- d**n N9 is very finicky!!!
Thanks for the help.
http://hastebin.com/usowulowal.diff
fhem said:
Thanks but get same result --> I have attached another twrp recovery.log at bottom. It shows whats happening w/ su flash. I think LOL.
I had stock rooted but now am trying to get my aosp build up and running w/ no luck rooting. I am going to start over clean w/ fastboot stock w/o root and then try installing aosp rom and rooting.
I am also having the problem w/ twrp unhooking sometimes --- d**n N9 is very finicky!!!
Thanks for the help.
Click to expand...
Click to collapse
You can also just try flashing the stock boot.img
And then flash SuperSU
USBhost said:
You can also just try flashing the stock boot.img
And then flash SuperSU
Click to expand...
Click to collapse
Ok finally got some time to play ---- fastboot is my friend LOL!!!
I used fastboot to wipe and start over w/ a clean tab -----> Only way I get root with my rom at current build is using twrp ---> flash my rom w/ stock boot image, flash supersu sr1 2.78 ---> bootup got root. That's all I can find that works. @USBhost Do you have an N k that allows root??? Do you have any idea what is going on with this??? BTW --- Trying to install as system install causes bootloop for me. So the only option I have at the moment is supply stock boot image and systemless root and w/ the rom. PITA
Hi all,
One of the things that was missing for me was the center clock.
The void in the middle needed to be filled so here you have a module to place the clock smack in the middle, it's not off center like previous mods, this one is as it should be.
Flashing always at your own risk, please read all instructions before flashing, module has been tested and is working on the latest android 11 BA running OOS, untested on non OOS ROM's
NOTES
-----------------
This will cause issues with android auto!
Does not work on Android 10
Confirmed working on Android 11 open beta 2
Confirmed working on Android 11 open beta 3
Confirmed working on OB4
Confirmed working on stable 11.0.2.2
Installation
-------------------
Pre-requisites
Rooted Oneplus 8 Pro
Android 11 Stable
Magisk Manager
Installation instructions
1. Download the module from here:
11.0.0 https://mega.nz/folder/OB8hXYqK#4hVILxDw-K7EKemL3FDNwQ
11.0.1.1
https://mega.nz/folder/SJ1G1RCD#izqB8T5SrK-uPiV4GVrTdQ
11.0.2.2
2.51 MB folder on MEGA
mega.nz
11.0.4.4
0 byte folder on MEGA
mega.nz
11.0.5.5
the module for 4.4 seems to be working fine for 5.5
If you have issues then disable it, reboot, re-enable then reboot and test.
11.0.6.6
2.51 MB folder on MEGA
mega.nz
11.0.7.7
Use the 0.6.6 version, it reloaded first time for me, i don't believe they changed OPSystemUI.apk so it's probably the exact same apk.
11.0.8.8
2.51 MB folder on MEGA
mega.nz
11.0.9.9
As this is only Octobers security update you can continue to use 11.0.8.8 thanks @mac796 for clarifying functionality.
11.0.10.10
Again no changes to OPSystemUI.apk so the previous release will continue to work on this version
2. Copy to your phones storage
3. Open Magisk and select the modules icon
4. Click "Install from storage"
5. Navigate to the downloaded folder and choose the zip inside.
6. Allow it to complete and then reboot.
Enjoy your center clock leave a thanks, let me know if it doesn't work and will do what we can to help.
Right side clock mod
---------------------------
Android 11.0.2.2
2.51 MB folder on MEGA
mega.nz
Thanks @Lycidias for testing
Troubleshooting
------------------------------
Magisk module failure.
This works for any magisk module failure.
1. Power off your phone by holding the power button, then turn it back on.
2. As your phone gets to the bootloader warning screen, press and hold volume up and down and continue to hold until the phone shows the boot animation.
3. You'll boot to safe mode, simply reboot once more.
4. On next boot all your magisk modules will be disabled, remove the problematic module and re-enable the functional ones.
Original mod made by
11-11.0.2.2
@Tulsadiver & @dianoandr tested by myself, absolutely massive thanks to them for this.
11.0.4.4 and onwards made by myself, original pixel version by Tulsadiver
REQUESTS
----------------
I can maybe do requests, but they won't be a priority and if i don't have the device, you will have to provide me the files required and give me the android version you're on, OS and you'll be testing too.
Oneplus 8T
------------
OOS 11.0.10.10 KB05BA
2.51 MB folder on MEGA
mega.nz
Thanks to @zarcom for testing
Enjoy
Did not work for A10
Works perfect on 11. Thank you.
[MOD EDIT: REMOVED OP QUOTE]
Any chance for porting to A10?
crazynapkinman said:
Any chance for porting to A10?
Click to expand...
Click to collapse
Can ask pal..will be tomorrow tho.
Why don't you just update to 11. It's way better than 10 anyway.
scott45333 said:
Works perfect on 11. Thank you.
Click to expand...
Click to collapse
Welcome.
crazynapkinman said:
Did not work for A10
Click to expand...
Click to collapse
Thanks for testing btw
dladz said:
Can ask pal..will be tomorrow tho.
Why don't you just update to 11. It's way better than 10 anyway.
Click to expand...
Click to collapse
I don't have an easy route to 11.
I'm on a Sprint\Tmo OP8.
I don't have Local Upgrade.
OTA disabled due to root and Tmo hasn't finished A11 anyway.
I'm hoping someone will make a A11 full rom to flash via TWRP to get me there
crazynapkinman said:
I don't have an easy route to 11.
I'm on a Sprint\Tmo OP8.
I don't have Local Upgrade.
OTA disabled due to root and Tmo hasn't finished A11 anyway.
I'm hoping someone will make a A11 full rom to flash via TWRP to get me there
Click to expand...
Click to collapse
Oh wow. What about converting to global?
dladz said:
Oh wow. What about converting to global?
Click to expand...
Click to collapse
I've been reading that thread for days and only get more confused the more I read...
I have to MSM back to stock? Then convert via fastboot? Idk... Very confusing reading it all.
Or I'm just too dense.
crazynapkinman said:
I've been reading that thread for days and only get more confused the more I read...
I have to MSM back to stock? Then convert via fastboot? Idk... Very confusing reading it all.
Or I'm just too dense.
Click to expand...
Click to collapse
Lol nah it's worrying doing these things but it's not usually as hard as you think.
Get it planned out before hand, I've rebranded before, on the p20 pro and I think a few HTC devices.
You'd be hard pushed to brick a OnePlus phone tbh.
But you're right to be careful. Just make a back up first.
dladz said:
Lol nah it's worrying doing these things but it's not usually as hard as you think.
Get it planned out before hand, I've rebranded before, on the p20 pro and I think a few HTC devices.
You'd be hard pushed to brick a OnePlus phone tbh.
But you're right to be careful. Just make a back up first.
Click to expand...
Click to collapse
Yeah. I got a backup of persist.img and boot partition.
I need to backup everything via TWRP?
Thanks much appreciated
Sent from my OnePlus IN2020 using XDA Labs
Thanks for this!! Really like centre clock One thing....now left side is disturbingly empty
hard case-never satisfied
But thank you!!
janitor9 said:
Thanks for this!! Really like centre clock One thing....now left side is disturbingly empty
hard case-never satisfied
But thank you!!
Click to expand...
Click to collapse
Haha it is check mine out though.
That's called energy ring.
crazynapkinman said:
Yeah. I got a backup of persist.img and boot partition.
I need to backup everything via TWRP?
Click to expand...
Click to collapse
So persist and boot is fine. But you probably won't be needing any of them.
As for the rest of it, backing up via twrp is one thing but at the point there ain't a functional copy of twrp for 11.
So backing up to twrp might not be the best idea.
I got out all my pics, vids, music, synced contacts with an account (Google) or sync everything to Google (I don't mean a back up as a single image, that's your choice)
Apps I would make a titanium back up of.
Then theres pretty much nothing left.
Copy all the titanium files out, that'll serve you well when you're ready to restore.
Then head down the rebranding route..
I'm not great with changing variant but I would back up also maybe your EFS partition if that's still a thing (IMEI's) just because of the networks hold on things, I can't think of anything else you could lose out on..
I'll check out the rebranding guides and see if I can make easier sense of it for you.
dladz said:
Haha it is check mine out though.
That's called energy ring.
Click to expand...
Click to collapse
Can you help me with a notchkiller mod that works on oxygenos 11 stable?
So far every mod i have used results in a bootloop
Blackdranzer said:
Can you help me with a notchkiller mod that works on oxygenos 11 stable?
So far every mod i have used results in a bootloop
Click to expand...
Click to collapse
We have no notch on the 8 pro?
dladz said:
We have no notch on the 8 pro?
Click to expand...
Click to collapse
Sadly some games and streaming apps like amazon prime display below the front canera....the result is a black bar just till the front camera
The notchkiller mods solved that issue but none of them working on android 11 so i was just asking if there any compatible version of the mod
Earlier netflix had this problem too but now they have solved it.
Blackdranzer said:
Sadly some games and streaming apps like amazon prime display below the front canera....the result is a black bar just till the front camera
The notchkiller mods solved that issue but none of them working on android 11 so i was just asking if there any compatible version of the mod
Earlier netflix had this problem too but now they have solved it.
Click to expand...
Click to collapse
There's a feature to change screen in android 11.
Plus you have the cut out option in display.