hi, my bro gave a z2 but i dont know what the error, before starts the phone and stuck to sony logo xperia and nothing was happened, now only flash to the top with red flashes and didnt power up and not charging, only testing with pc, didnt have ac charger, i have win10 x64 maybe its another problem i think, any chance recoverying?
nothing to loose
Flash new ROM via flashtool, that's all
If it stucks at SONY logo, there's a softbrick i think
Either that or go on Sony Update Service and try a repair
Related
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA
well the story goes a bit like this my wifi didnt work so i used my clock work mod to kinda delete every thing on my x10min
and than i tried to turn the phone on again and the phone just got stuck at the se logo for somme resoen my phone wont start at flashmode
so i cant just flash a stock os and when i just plug the phone to my pc or wall chrger my phone just starts up and there isnt even a yellow
light blub that says hes rechrageing it just lights up and get stuck at se logo
plz help
It actually is possible to connect it to flashmode. Plug your phone to a computer, start flashing. It will ask you to get into flashmode. Then, with cable still plugged, do a hard reset by holding shutdown and home (middle) buttons at once. After some time, LED will turn on green and it's in flashmode. If it gets out of flashmode fast, then just do an extra hard reset when it just got into flashmode, i succeeded to repair my e10i this way.
Sent from my E10i using xda app-developers app
well it worked and didnt worked i was able to enter flashmode but when i flashed the stock room it still got stuck at se logo
aharonzu said:
well it worked and didnt worked i was able to enter flashmode but when i flashed the stock room it still got stuck at se logo
Click to expand...
Click to collapse
How did you flash that ROM, with flashtool or using seus or pc-companion?
If you used flashtool, where did you get the stock ROM from?
i used flashtoll with a stock room i got from xda
aharonzu said:
i used flashtoll with a stock room i got from xda
Click to expand...
Click to collapse
Try a Repair with SEUS or PC Companion, maybe the ROM you got wasn't for your phone, it's fairly easy to mix up the ROMS with the similar names that SE gave their phones.
thanks so much guys as i turns out i got mixed with the roms but now my phone is up and running thhanks alot :laugh::laugh::laugh::laugh::laugh:
today i tried flashing the aokp build 4 to my xperia s and after i tried rebooting the phone from the recovery it just stays at a black screen! i have tried connecting the phone to my pc and reflashing the original firmware via flashtool but all i get are errors! i have also tried connecting in fastboot mode but there is no pc detection even tho the blue led appears on my phone! somebody please help since when i turn my phone on all it does is vibrate! no sony logo no nothing! and when i keep holding the power button a green led light flashes evry few seconds!!!! EMERGENCY!!!!
EDIT: i fixed it guys. all i did was restart my pc and flashtool worked again so i reflashed an ics tft file and all was good again!
Hello everyone who is reading this!
So.. I'm having a problem as the title says, the situation is this:
I've been using my Xperia U fine these past days, but today I found a problem.
After flashing an app with CWM I had to reboot the device, this is where the problem appears:
The device vibrates normally as it would when booting up, but the screen doesn't turns on
-No SONY logo
-No ROM logo
-No Boot Animation
I've tried using flashtool and reinstalling the drivers, but even so, the device isn't recognised by the program nor by the PC, so PCC and SUS are useless due to this.
Current device condition:
Device: Xperia U
Rom: eXperience V2
Last action performed: Flashing AC!D Audio Engine then reboot
emethius said:
Hello everyone who is reading this!
So.. I'm having a problem as the title says, the situation is this:
I've been using my Xperia U fine these past days, but today I found a problem.
After flashing an app with CWM I had to reboot the device, this is where the problem appears:
The device vibrates normally as it would when booting up, but the screen doesn't turns on
-No SONY logo
-No ROM logo
-No Boot Animation
I've tried using flashtool and reinstalling the drivers, but even so, the device isn't recognised by the program nor by the PC, so PCC and SUS are useless due to this.
use any other kernel and try to flash the rom dont wipe anything
Click to expand...
Click to collapse
Hello,
Some days ago I started to have some kind of problems with booting my Xperia J. It started that my phone suddenly soft-brick and I was unable to start it, then I read that I have to Flash it with PC Companion, I did that, Companion reflashed the whole system, didnt work, then, I tried to Flash it using FlashTool didnt work. Phone vibrates on startup. After all these tries, my phone, on boot-up show nothing just black screen and the green led blink 2 times. Please help, thank you !