Phone Driver is not recognized after flashing Custom Rom - Lenovo P780

Hi,
After i flashed Custom rom AOSP 4.4.4 by bauuu, i wanted to go back to stock firmware, but i can't flash it using SPflash tools, since my laptop cant recognize the phone, it seem that the phone id is change also to other than Lenovo, so it needs a different drivers.
can anyone help?

spiderclan said:
Hi,
After i flashed Custom rom AOSP 4.4.4 by bauuu, i wanted to go back to stock firmware, but i can't flash it using SPflash tools, since my laptop cant recognize the phone, it seem that the phone id is change also to other than Lenovo, so it needs a different drivers.
can anyone help?
Click to expand...
Click to collapse
Look what you have to do:
1. Power off your phone and prepare to flash(Open spflash tool, load scatter et etc)
2. Press firmware upgrade and plug the phone, open the back case of your phone and there you will find a small red button
3. Error will appear. Now repress the firmware upgrade button and press small red button for 20 seconds.
4. Flashing should start.
5. Tell me if this dont work!
6. Good Luck.

stympy said:
Look what you have to do:
1. Power off your phone and prepare to flash(Open spflash tool, load scatter et etc)
2. Press firmware upgrade and plug the phone, open the back case of your phone and there you will find a small red button
3. Error will appear. Now repress the firmware upgrade button and press small red button for 20 seconds.
4. Flashing should start.
5. Tell me if this dont work!
6. Good Luck.
Click to expand...
Click to collapse
Actually, the main reason why i cannot flash is because of the driver signing issue in win 8.1, after that i can flashed again

spiderclan said:
Actually, the main reason why i cannot flash is because of the driver signing issue in win 8.1, after that i can flashed again
Click to expand...
Click to collapse
Disable driver signature enforcement Windows 8. Will work for sure afer disable.
Here is how to: https://www.youtube.com/watch?v=gmw86KplqmU

Related

[Q] My phone has been bricked! :`(

Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
try to reinstall the drivers.. and then connect your device through sptools.
kalpesh_36 said:
try to reinstall the drivers.. and then connect your device through sptools.
Click to expand...
Click to collapse
I tried that.
Still not working! :crying:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
shivrajsingh said:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
Click to expand...
Click to collapse
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
edwardpage said:
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
Click to expand...
Click to collapse
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Thank you so much! Finally unbricked my MMX A116
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool.. Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
aryankirtan said:
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
Click to expand...
Click to collapse
Most welcome
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
alex279 said:
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
Click to expand...
Click to collapse
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
need help for drivers
shivrajsingh said:
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
Click to expand...
Click to collapse
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
alex279 said:
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
Click to expand...
Click to collapse
Which windows version, u r using??
.....!!!!!
shivrajsingh said:
Which windows version, u r using??
Click to expand...
Click to collapse
Using windows 8 - 64Bit
alex279 said:
Using windows 8 - 64Bit
Click to expand...
Click to collapse
First disable driver signing (Windows 8 users Only)
use this link for tutorial.....
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8
Now extract the mtk universal driver attachment.
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.(right click on new appeared device -> browse my computer for drivers-> browse windows 7 drivers i.e. usb2ser_Win764 in extracted folder)
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
alex279 said:
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello friend,
Try this way: http://forum.xda-developers.com/showthread.php?t=2346389
As it works on MediaTek devices and MMX A116 is one of this.
pls suggest me how i can download the correct drivers.
aryankirtan said:
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
Click to expand...
Click to collapse
It had to me once, when I was going to flash the stock rom from SP Flash tools. I think there was some drivers problem, and the process stopped in between, and when i tried to turn the phone on, it only emitted some light and would stay that until the battery would drain. After a few days, it went dead, no response. This was the time I realized that I had to give it to a service center. Unfortunately, the service was awfully bad, and my phone came repaired back after 3 MONTHS! So, I recommend, that you hand it over to a non-micromax service center (as your warranty is now void), and try your luck! All the best!
P.S. My CHD is working awesome now, installed MiUi
[email protected] said:
pls suggest me how i can download the correct drivers.
Click to expand...
Click to collapse
download Mt65xx vcom drivers then see the video below
---------- Post added at 12:54 PM ---------- Previous post was at 12:06 PM ----------
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
just flash the stock backup using SP flash tool

HELP!!! My lenovo p780 dead, does not boot.

My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
Did u installed p780 drivers into your Pc ?
u must if u want to flash it .
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
It's easy to fix Just follow my steps. :fingers-crossed:
1.Prepare the rom which was running ok before,for example, for me it was @satanduck 's prerooted TWRP S124 rom.
2.Open the SP flash tool.
3.Load the scatter file from the rom which worked ok for you.
4.Tick the box that says 'DA DL All With Check Sum'
5.Hit Firmware Upgrade
Now is the hardest step
1.Open the cover of your phone.
2.Look for the red reset button which was close to SD card and press it a few times.
3.Connect USB cable to your phone and firmware upgrade should start and wait for the green circle! :good::laugh:
Best luck :good:
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
What have you done to your phone? Did you install or flash something? Did you change something in system ?
Sent from my Lenovo P780 with TWRP 2.7.1.1
glixbourkt said:
Did u installed p780 drivers into your Pc ?
u must if u want to flash it .
Click to expand...
Click to collapse
Yes, I installed mtk usb drivers. but I´m not sure if it´s ok o no. Because I have to connect the battery and push volume+up button to make it connected. and it´ll disappear immediately in device management window.
stympy said:
What have you done to your phone? Did you install or flash something? Did you change something in system ?
Sent from my Lenovo P780 with TWRP 2.7.1.1
Click to expand...
Click to collapse
Just tried to root, but not completed. and then tried flash to rescue, but not yet get it connected to computer.
tngultimate said:
It's easy to fix Just follow my steps. :fingers-crossed:
1.Prepare the rom which was running ok before,for example, for me it was @satanduck 's prerooted TWRP S124 rom.
2.Open the SP flash tool.
3.Load the scatter file from the rom which worked ok for you.
4.Tick the box that says 'DA DL All With Check Sum'
5.Hit Firmware Upgrade
Now is the hardest step
1.Open the cover of your phone.
2.Look for the red reset button which was close to SD card and press it a few times.
3.Connect USB cable to your phone and firmware upgrade should start and wait for the green circle! :good::laugh:
Best luck :good:
Click to expand...
Click to collapse
I can not get it connected to computer. Only when I push volume+up button,and connect the usb cable, it can be found. But then it disappears immediately in device management window. can not continue to flash.
Hi,
Please verify that you have a correct production date. I got a P780 after 0314. please try the solution on this post
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
If this resolves your problem, that keep that preloader. With that you can almost flash every rom that there is with the flashtool.
(i'm very satisfied with the latest rom on needrom Vibeui2.0 (the rom page also offers the new preloader )
Greetz,
btw to try to flash with the new preloader set up the flashtool, push the red button on the back of your phone, connect the phone an release the button. If all the drivers are correct your phone will be flashed. ( this new batch phones gave me a heart attack also , mine wasn't even 12 hours active before i softbricked it )
Re-Mi said:
Hi,
Please verify that you have a correct production date. I got a P780 after 0314. please try the solution on this post
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
If this resolves your problem, that keep that preloader. With that you can almost flash every rom that there is with the flashtool.
(i'm very satisfied with the latest rom on needrom Vibeui2.0 (the rom page also offers the new preloader )
Greetz,
btw to try to flash with the new preloader set up the flashtool, push the red button on the back of your phone, connect the phone an release the button. If all the drivers are correct your phone will be flashed. ( this new batch phones gave me a heart attack also , mine wasn't even 12 hours active before i softbricked it )
Click to expand...
Click to collapse
When I push the red button, phone can not be recognized by computer. Only I press the volume-up button, it can be recognized by computer.
I start the flash, then push volume-up button to make it connected, but then got BROM error. I attach the screen picture.
bonbonbillo said:
When I push the red button, phone can not be recognized by computer. Only I press the volume-up button, it can be recognized by computer.
I start the flash, then push volume-up button to make it connected, but then got BROM error. I attach the screen picture.
Click to expand...
Click to collapse
You must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
Check if your phone is produced in 2014. If it is you must use another preloader.
stympy said:
You must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
Check if your phone is produced in 2014. If it is you must use another preloader.
Click to expand...
Click to collapse
Yes, I have the FlashTool v3.1304.0.119. (picture attached)
My phone is produced before 2014.
bonbonbillo said:
Yes, I have the FlashToll v3.1304.0.119. (picture attached)
My phone is produced before 2014.
Click to expand...
Click to collapse
Try to flash with this Flah Tool, and tell me if gives you new errors.
stympy said:
Try to flash with this Flah Tool, and tell me if gives you new errors.
Click to expand...
Click to collapse
Which one? Have you attached any file? I don't see it. Tks.
bonbonbillo said:
Which one? Have you attached any file? I don't see it. Tks.
Click to expand...
Click to collapse
I have attached now.
Sent from my Lenovo P780 with TWRP 2.7.1.1
stympy said:
I have attached now.
Sent from my Lenovo P780 with TWRP 2.7.1.1
Click to expand...
Click to collapse
Same error, when the red color goes to the end, after around 3 minutes, says brom error....4001
bonbonbillo said:
Same error, when the red color goes to the end, after around 3 minutes, says brom error....4001
Click to expand...
Click to collapse
I think you should go to a service store. Thats my opinion.
stympy said:
I think you should go to a service store. Thats my opinion.
Click to expand...
Click to collapse
Trying to find solution here, not to solve only with money in mobile store. Anybody else help?
bonbonbillo said:
Trying to find solution here, not to solve only with money in mobile store. Anybody else help?
Click to expand...
Click to collapse
I thought you have warranty on your phone !
So... this error appear when you try to flash wrong ROM or you have wrong drivers installed. Try to remove drivers you have installed and try to reinstall another driver.
Orrrr.. your phone could be a clone. Just an ideea ...
Could you tell us more about your phone... maybe pictures taken from battery or box who came with ?

Lenovo P780 - Won't boot

Hi All,
Have seen the numerous posts on this forum for the Lenovo P780, but cannot for the life of me get mine to work again
Model: P780 4GB (believe it is the Chinese version as when I first started it, Android was in Chinese (hence me trying to replace the ROM).
Here are the symptoms:
Black screen, won't power on, cannot even get into factory reset mode.
Tried the reset button on the back of the phone (some say 3-5 seconds others say 20 seconds - Tried both, nothing!).
Tried to fix the problem by doing the following:
Download the SP Flash Tools version 5.1352.01 and ran them on my Windows 7 Machine as Administrator.
Loaded the P780_ROW_S226_4GB_KIT_KAT (as this is what I thought would do the trick.)
Selected the MT6589_Android_scatter_emmc.txt file and then Firmware Upgrade set, then hit download, connected the phone to the laptop (red light on the phone), SP Flash Tool then goes to 100% Download DA (in red), and then the message "Unrecognized ROM detected".
That's it nothing else. Can't power on the phone.
Any advice help would be appreciated before I throw this phone through a window!!!
Thanks,
Mak.
makavelli12 said:
Hi All,
Have seen the numerous posts on this forum for the Lenovo P780, but cannot for the life of me get mine to work again
Model: P780 4GB (believe it is the Chinese version as when I first started it, Android was in Chinese (hence me trying to replace the ROM).
Here are the symptoms:
Black screen, won't power on, cannot even get into factory reset mode.
Tried the reset button on the back of the phone (some say 3-5 seconds others say 20 seconds - Tried both, nothing!).
Tried to fix the problem by doing the following:
Download the SP Flash Tools version 5.1352.01 and ran them on my Windows 7 Machine as Administrator.
Loaded the P780_ROW_S226_4GB_KIT_KAT (as this is what I thought would do the trick.)
Selected the MT6589_Android_scatter_emmc.txt file and then Firmware Upgrade set, then hit download, connected the phone to the laptop (red light on the phone), SP Flash Tool then goes to 100% Download DA (in red), and then the message "Unrecognized ROM detected".
That's it nothing else. Can't power on the phone.
Any advice help would be appreciated before I throw this phone through a window!!!
Thanks,
Mak.
Click to expand...
Click to collapse
Now step by step how to doit. This is the hard part for beginners:
1. download in your computer the drivers from here. Go to the bottom of the page.
2. install drivers
3. restart your computer (just to be sure).
4. now...with your phone allready powered off...
5. plug your USB cable in your computer
5.1 open the device manager...
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly, if not grab fast the new thing appeared in device manager and install the seccond set of the drivers.
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart of your computer download the ROM ,unzip to a known folder; skip this step if you have allready your firmware
10. now load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 skip this step.
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 select Firmware Upgrade and press Download Button
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. if the firmware is not starting remove the back case of your phone and hold pressed the little red button from the right side, for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
18. disconect your phone and power on your phone
19. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
20. Reboot at least once then your phone is ready to work HARD.
21. Good luck. Hope This Helps You.
stympy said:
Now step by step how to doit. This is the hard part for beginners:
1. download in your computer the drivers from here. Go to the bottom of the page.
2. install drivers
3. restart your computer (just to be sure).
4. now...with your phone allready powered off...
5. plug your USB cable in your computer
5.1 open the device manager...
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly, if not grab fast the new thing appeared in device manager and install the seccond set of the drivers.
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart of your computer download the ROM ,unzip to a known folder; skip this step if you have allready your firmware
10. now load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 skip this step.
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 select Firmware Upgrade and press Download Button
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. if the firmware is not starting remove the back case of your phone and hold pressed the little red button from the right side, for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
18. disconect your phone and power on your phone
19. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
20. Reboot at least once then your phone is ready to work HARD.
21. Good luck. Hope This Helps You.
Click to expand...
Click to collapse
Hi Stympy,
I have managed to get an Android ROM installed on the P780. Details are:
Android version 4.2.1
Build: P780_S136_140306
The only problem now is that the rear camera does not work, and have been told that trying to install a non-standard ROM could have blown the rear camera.
As I am not experienced with flashing these (or any other types of smartphones), I have no idea if this is correct.
Any advice would be appreciated.
Mak.
makavelli12 said:
Hi Stympy,
I have managed to get an Android ROM installed on the P780. Details are:
Android version 4.2.1
Build: P780_S136_140306
The only problem now is that the rear camera does not work, and have been told that trying to install a non-standard ROM could have blown the rear camera.
As I am not experienced with flashing these (or any other types of smartphones), I have no idea if this is correct.
Any advice would be appreciated.
Mak.
Click to expand...
Click to collapse
Look what i want you to do !
1. go here and download your firmware
2. go here and download this preloader.
3. replace the original preloader with the one from step 2.
4. reflash firmware and tell me what happent !
5. waiting for reply...
stympy said:
Look what i want you to do !
1. go here and download your firmware
2. go here and download this preloader.
3. replace the original preloader with the one from step 2.
4. reflash firmware and tell me what happent !
5. waiting for reply...
Click to expand...
Click to collapse
Hi Stympy,
Carried out the steps you listed, and I now get the message "Unrecognized ROM detected".
makavelli12 said:
Hi Stympy,
Carried out the steps you listed, and I now get the message "Unrecognized ROM detected".
Click to expand...
Click to collapse
Got to say a BIG thank you to Stympy who got my P780 back working again!!! A magician!!!!
Thanks again!:good:

Can't go to download mode - phone is booting into system

hi,
As is thred name - can't go to download mode - after connecting to PC phone is bootlooping into system
Help
borda01 said:
hi,
As is thred name - can't go to download mode - after connecting to PC phone is bootlooping into system
Help
Click to expand...
Click to collapse
What do you want to do?
Flash rom inne flash tool
borda01 said:
Flash rom inne flash tool
Click to expand...
Click to collapse
Your phone is not powering down ?
Lenovo P780 is flashed by powering down.
You power down the phone, prepare to flash and when you are ready just plug the USB cable with the phone powered down.
That is it.
That not works, phone is powered down, but after connecting cable is powering on into system...
borda01 said:
That not works, phone is powered down, but after connecting cable is powering on into system...
Click to expand...
Click to collapse
Try this:
When the procedure to flash is ready, with the USB cable connected press the red button and keep the button pressed, then press download in SP Flash Tool and release the button. Do all this in this order. Tell me what is going on?
The flash should start.
stympy said:
Try this:
When the procedure to flash is ready, with the USB cable connected press the red button and keep the button pressed, then press download in SP Flash Tool and release the button. Do all this in this order. Tell me what is going on?
The flash should start.
Click to expand...
Click to collapse
Phone is booting, sp flash tool "searching"
Phone has TWRP installed, but I can't install any ROM - error appears
borda01 said:
Phone is booting, sp flash tool "searching"
Phone has TWRP installed, but I can't install any ROM - error appears
Click to expand...
Click to collapse
What firmware do you have installed now?
stympy said:
what firmware do you have installed now?
Click to expand...
Click to collapse
(vibeui_v2.0_1443_7.25.1_st)
In device manager phone is detected as MT65XX preloader in about 5 seconds - after that it bootloops.
EDIT:
solution:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Click to expand...
Click to collapse
borda01 said:
In device manager phone is detected as MT65XX preloader in about 5 seconds - after that it bootloops.
Click to expand...
Click to collapse
I understand now. Your computer does not recognize your phone. The drivers are not installed at all or correctly.
Download the drivers from here and install them. The drivers are at the bottom of the page.
To flash use only the sp flash tools from here.
Small tutorial to install the drivers:
I think was someting like this:
1. First install the .exe file. Reboot PC.
2. Now plug the phone to the PC and new hardware wizard will appear. Unplug the USB cable.
3. Now power off the phone.
4. Again plug the phone this time powered off.
5. At this time in Device Manager appears for a second or two not in USB area, in ports area something with.. MTK65xx...
6. Click very fast on it because that will dessapear fast.
7. After you clicked on it all you have to do is update driver, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Good luck.
What is a newest version of TWRP for P780?
borda01 said:
What is a newest version of TWRP for P780?
Click to expand...
Click to collapse
For normal layout is TWRP 2.8.4.0 rev.2 and for + layout is 3.0.2-7.

HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES

HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004)
Follow the following steps:
1. Get SP flash tools (Latest version)
2. Download your phone's firmware (from manufacturer site or needrom.com etc) and extract it.
3. install Mediatek Preloader drivers as per your OS version (win x7 , 8 10 etc) and architecture (32/64bit).
4. Run Flash tools with admin as administrator
5. select the scatter file from the firmware folder you downloaded and wait for it to load. (Do not connect your phone yet and leave the battery inserted)
6. Select Download Only
7. Hit the download button
8. Now plug in the micro/type C usb end of your cable to your phone but dont plug to PC. yet
9. While hold down both volume buttons i.e up and down buttons, (Do not press the power button), Insert the Usb cable end to your PCs usb port (Please choose a port thats very reliable).
10. After a while, P Flash tool will begin to upgrade your phone, dont release the buttons yet, let it lapse about 2mins then release them, the firmware upgrade will still continue and it will display a tick pop-up when done (this may take between 5-10mins).
Now unplug your phone, remove and re-insert the battery and power-up your phone. You phone is now unbricked.
Note that the first boot will longer than a regular boot.
This saved me
Oh my god. I was searching for hours and hours for a solution. This post saved my back side.
Perfect Solution for ZTE Blade A520
Thank you very much. This worked like a charm. Very helpful
adisa said:
FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004)
Follow the following steps:
1. Get SP flash tools (Latest version)
2. Download your phone's firmware (from manufacturer site or needrom.com etc) and extract it.
3. install Mediatek Preloader drivers as per your OS version (win x7 , 8 10 etc) and architecture (32/64bit).
4. Run Flash tools with admin as administrator
5. select the scatter file from the firmware folder you downloaded and wait for it to load. (Do not connect your phone yet and leave the battery inserted)
6. Select Download Only
7. Hit the download button
8. Now plug in the micro/type C usb end of your cable to your phone but dont plug to PC. yet
9. While hold down both volume buttons i.e up and down buttons, (Do not press the power button), Insert the Usb cable end to your PCs usb port (Please choose a port thats very reliable).
10. After a while, P Flash tool will begin to upgrade your phone, dont release the buttons yet, let it lapse about 2mins then release them, the firmware upgrade will still continue and it will display a tick pop-up when done (this may take between 5-10mins).
Now unplug your phone, remove and re-insert the battery and power-up your phone. You phone is now unbricked.
Note that the first boot will longer than a regular boot.
Click to expand...
Click to collapse
Thank you very much Sir, you are awesome!
Thank you very much Sir, you are awesome! I have made my dead phone alive following your post. You are the Life Saver of my phone. I have no word to thank you. I salute your hard work. Thank you very much. I want to share your post to everyone who are seeking solution like me.
mohidulhaq said:
Thank you very much Sir, you are awesome! I have made my dead phone alive following your post. You are the Life Saver of my phone. I have no word to thank you. I salute your hard work. Thank you very much. I want to share your post to everyone who are seeking solution like me.
Click to expand...
Click to collapse
New Error Now-
Error : S_AUTH_HANDLE_IS_NOT_READY(5000)
i have this error "Failed to Connect DA: S_AUTH_HANDLE_IS_NOT_READY". i dont know how i do
Ndanou jean-claude said:
i have this error "Failed to Connect DA: S_AUTH_HANDLE_IS_NOT_READY". i dont know how i do
Click to expand...
Click to collapse
Hi!
You should watch this video and tutorial, it was helpful for me too.
https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/

Categories

Resources