Xiaomi TV Box 3 (Amlogic S905) - Android Stick & Console AMLogic based Computers

New Xiaomi TV Box 3 with Amlogic S905:
- Amlogic 905, Cortex-A53, 64-Bit 2.0 GHz
- GPU: Mali-450, 3+2Core 750 MHz
- 1GB DDR3
- 4GB eMMC5.0
-WiFi: 2.4GHz/5.0GHz 802.11 a\b\g\n\ac
-Bluetooth4.1+EDR
-USB 2.0, HDMI 2.0
- H.265 [email protected], H.264 [email protected];AVS+; MPEG1/2/4, VC-1, DivX4/5, WMV3 [email protected]; Real8/9/10 [email protected];
-AVI, MOV, MKV, FLV, RMVB, TS, M2TS, MP4, 3GP, MPEG
- 3D (?)
More about Xiaomi TV Box 3 from Official Chinese Xiaomi Store (chinese lang)
I think that in this new version of Xiaomi TV Box we can use remote control like Air mouse(That's would be great). But I can't be sure...
Maybe someone knows Chinese:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

UPD: I found a translated description of this TV box here
I think it is quite good TV Box.

Hmmm 1GB ram & 4GB rom don't bother with this there's just not enough memory to do anything + way over priced too.
The remote looks cool though I would say this is ment for the Chinese market

got it yesterday and was my biggest mistake to buy it,i would not recommend to anyone this one cause is in Chinese language and there was no warning at all on gearbest.com that this item does not have English lang,going to take it back and order another one and better

can change to english very easy
i recommend tis https://www.youtube.com/watch?v=o-6qkn6awJQ to change to English. go to http://assets.sfcdn.org/apk/com.shafa.market/236/d4b163f/com.shafa.market_4.5.6_international.apk copy to a usb drive and follow the youtube video. if you manage to change to English use the baidu keybord with eng .i hop this will help you. i have in stall kodi on this box its not bad i think.

boki4k said:
i recommend tis https://www.youtube.com/watch?v=o-6qkn6awJQ to change to English. go to http://assets.sfcdn.org/apk/com.shafa.market/236/d4b163f/com.shafa.market_4.5.6_international.apk copy to a usb drive and follow the youtube video. if you manage to change to English use the baidu keybord with eng .i hop this will help you. i have in stall kodi on this box its not bad i think.
Click to expand...
Click to collapse
Nice. I just bought one of these units but I'm worried about a firmware update wiping out the ability to root when I connect to wifi. Can we disable auto-updates?

nocturnx said:
Nice. I just bought one of these units but I'm worried about a firmware update wiping out the ability to root when I connect to WiFi. Can we disable auto-updates?
Click to expand...
Click to collapse
I have lost root before, with auto update of my MIBOX ( I have earlier 2GB version) than I rooted again, installed Play Store, all my apps and I purchased Super User app Pro version it has ability to keep Root even after update. And now I'm not afraid and update my MIBOX to the latest firmware.

PhilMik said:
I have lost root before, with auto update of my MIBOX ( I have earlier 2GB version) than I rooted again, installed Play Store, all my apps and I purchased Super User app Pro version it has ability to keep Root even after update. And now I'm not afraid and update my MIBOX to the latest firmware.
Click to expand...
Click to collapse
Hmm, alright. Did you root for any particular reason?

Anyone else running Kodi on this box? I'm having problems with passthrough audio

I think the Pro version worth the 16euros extra

anyone tried uninstalling the built in android and running OpenElec on it?

[email protected] said:
I think the Pro version worth the 16euros extra
Click to expand...
Click to collapse
I ordered 2 in gearbest today.
at flash sale 79 u$s each, and 2 xiaomi joysticks for 20 bucks each....
I hope I can change language....
In the worst case, I use a custom launcher.
If it can be rooted, language can be changed with no problem

Hi, you can install apex luncher. Than it will add a new "settings" icon. From there you can choose any language you want
Interesting the new Xiaomi Mi TV Box 3 Enhanced

The Xiaomi Box 3(S905) with one usb port only can also be rooted and works woth google apps also.
you just have to flash the .106 rom, then go setting change the language to English (because the .106 rom natively supports English) and then you can use kongoroot to root it via computer and USB to USB Cable after activating adb. once done you can install Gapps and change the default laucher and disable all the Mi bloatware , this way you can have more space and less ads on the device.
Sent From Algeria

urbanmec said:
The Xiaomi Box 3(S905) with one usb port only can also be rooted and works woth google apps also.
you just have to flash the .106 rom, then go setting change the language to English (because the .106 rom natively supports English) and then you can use kongoroot to root it via computer and USB to USB Cable after activating adb. once done you can install Gapps and change the default laucher and disable all the Mi bloatware , this way you can have more space and less ads on the device.
Sent From Algeria
Click to expand...
Click to collapse
How can I download .106 rom as you said. Thanks

urbanmec said:
The Xiaomi Box 3(S905) with one usb port only can also be rooted and works woth google apps also.
you just have to flash the .106 rom, then go setting change the language to English (because the .106 rom natively supports English) and then you can use kongoroot to root it via computer and USB to USB Cable after activating adb. once done you can install Gapps and change the default laucher and disable all the Mi bloatware , this way you can have more space and less ads on the device.
Sent From Algeria
Click to expand...
Click to collapse
Hi,
where did you download the .106 firmware?
best regards,
John

nocturnx said:
Hmm, alright. Did you root for any particular reason?
Click to expand...
Click to collapse
I've rooted for installing apps like Google Play and Amazon App Store, Xposed with You Tube add blocker and ability of installing Apps on SD card.

Hey guys is this thread based on this same unit.
https://www.walmart.com/ip/Mi-Box-A...75035&wl11=online&wl12=54827138&wl13=&veh=sem
Now selling at walmart. I just got one and trying to find some info. It was only 69 or so.

Hi guys
Can anyone who has this tell me if it has an IR receiver? I want to use it with a Logitech Harmony 650. The Logitech site lists it as a compatible device but I have my doubts as I know the remote uses bluetooth, and I've seen conflicting reports. Thanks!

I got one last weekend. I put my sunvell t95 on the top shelf of my closet. This is the box. It only has one USB port, I use a usb hub and a external hard drive, a usb to Ethernet adapter. The true Google experience is perfect on this box. Plus mobdro and kodi. I still want to root to do some build prop editing when someone figures out how to root this. The s905 cannot handle this box. It is the best buy around. Only thing I wish is if it was a Huawei box because they should have done more with there box. But Xiaomi and leeco have past them in the home entertainment market.
Sent from my Pixel XL using XDA-Developers mobile app
---------- Post added at 10:30 PM ---------- Previous post was at 10:29 PM ----------
sappy404 said:
Hi guys
Can anyone who has this tell me if it has an IR receiver? I want to use it with a Logitech Harmony 650. The Logitech site lists it as a compatible device but I have my doubts as I know the remote uses bluetooth, and I've seen conflicting reports. Thanks!
Click to expand...
Click to collapse
No ir reciever, Bluetooth only or Android app remote
Sent from my Pixel XL using XDA-Developers mobile app

Related

Porting Netflix for android TV for other devices. Is it possible?

Hey, I'm just info seeking. I would like to know if it is possible to port the android TV version of Netflix to other devices. I currently use a rooted Ouya as a set top box. The standard Netflix app simply doesn't cut it on a 40" HDTV. And if it's not possible are there any other ways to get HD out of Netflix on an android device.
Sent from my Nexus 4 using XDA Free mobile app
veritas2000 said:
Hey, I'm just info seeking. I would like to know if it is possible to port the android TV version of Netflix to other devices. I currently use a rooted Ouya as a set top box. The standard Netflix app simply doesn't cut it on a 40" HDTV. And if it's not possible are there any other ways to get HD out of Netflix on an android device.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
It seems that all the Android TV apps are designed to only run with the Android TV Launcher, which unfortunately only works on Nexus Player. Hopefully someone will be able to mod it and make it run on other Android Settop boxes. I have a Matricom G-Box Q and it is totally awesome for Kodi, but like all other android settops, can't use the Android TV apps.
xdaner
xdaner said:
It seems that all the Android TV apps are designed to only run with the Android TV Launcher, which unfortunately only works on Nexus Player. Hopefully someone will be able to mod it and make it run on other Android Settop boxes. I have a Matricom G-Box Q and it is totally awesome for Kodi, but like all other android settops, can't use the Android TV apps.
xdaner
Click to expand...
Click to collapse
Same problem here with my matricom box. Does a TV layout version of Netflix for Android not exist? Are they all touchscreen based except the Android TV ones that cannot run on a settop box?
I would like to know if it is possible to port the android TV version of Netflix to other devices.
xdaner said:
It seems that all the Android TV apps are designed to only run with the Android TV Launcher, which unfortunately only works on Nexus Player. Hopefully someone will be able to mod it and make it run on other Android Settop boxes. I have a Matricom G-Box Q and it is totally awesome for Kodi, but like all other android settops, can't use the Android TV apps.
xdaner
Click to expand...
Click to collapse
Not totally true. The WeTek Core come with YouTube app Android TV version preinstalled!
veritas2000 said:
Hey, I'm just info seeking. I would like to know if it is possible to port the android TV version of Netflix to other devices. I currently use a rooted Ouya as a set top box. The standard Netflix app simply doesn't cut it on a 40" HDTV. And if it's not possible are there any other ways to get HD out of Netflix on an android device.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
@veritas2000
try this this , this is netflix for androis tv moded to work on android, it works on my android phone (with keyboard) and multiple android tv boxes.
please let me know how it works
hugh a said:
@veritas2000
try this this , this is netflix for androis tv moded to work on android, it works on my android phone (with keyboard) and multiple android tv boxes.
please let me know how it works
Click to expand...
Click to collapse
Crashes upon startup, using a Beelink i68 (Rockchip RK3368). It works on my LG G4 though...
buggyglint said:
Crashes upon startup, using a Beelink i68 (Rockchip RK3368). It works on my LG G4 though...
Click to expand...
Click to collapse
also tested and worked on the wetek core
hugh a said:
@veritas2000
try this this , this is netflix for androis tv moded to work on android, it works on my android phone (with keyboard) and multiple android tv boxes.
please let me know how it works
Click to expand...
Click to collapse
Is this still being worked on? I installed it on a Razer Forge, and it lets me browse (which is more than I could say for the official APK), but whenever I try to watch a video, I get a "CODE_NOT_AVAILABLE" error.
heartburnkid said:
Is this still being worked on? I installed it on a Razer Forge, and it lets me browse (which is more than I could say for the official APK), but whenever I try to watch a video, I get a "CODE_NOT_AVAILABLE" error.
Click to expand...
Click to collapse
razer forge is not a Widevine Level 1 certified device, meaning it will not play netflix in HD only SD, the android TV version of netflix will not function without HD keys
---------- Post added at 03:40 PM ---------- Previous post was at 03:27 PM ----------
heres a moded netflix android TV 2.5.0 if anyone needs it
hugh a said:
razer forge is not a Widevine Level 1 certified device, meaning it will not play netflix in HD only SD, the android TV version of netflix will not function without HD keys
---------- Post added at 03:40 PM ---------- Previous post was at 03:27 PM ----------
heres a moded netflix android TV 2.5.0 if anyone needs it
Click to expand...
Click to collapse
Actually, yes it is....i check it with the app DRM info....Why Netflix for Android TV is not working for the forge? Only Razer and Netflix knows...
achaw said:
Actually, yes it is....i check it with the app DRM info....Why Netflix for Android TV is not working for the forge? Only Razer and Netflix knows...
Click to expand...
Click to collapse
http://www.razersupport.com/gaming-systems/razer-forge-tv/
hugh a said:
http://www.razersupport.com/gaming-systems/razer-forge-tv/
Click to expand...
Click to collapse
And this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
achaw said:
And this?
Click to expand...
Click to collapse
can you watch netflix in HD? im interested in buying a new box and any input on your experience with this device would be helpful
hugh a said:
can you watch netflix in HD? im interested in buying a new box and any input on your experience with this device would be helpful
Click to expand...
Click to collapse
NO. You can't. Only razer know why netflix is not supported in the Forge...
hi everyone,
I have the same problem, I have installed 2.5.0 version, I can see the film list and when I press play, after 2 seconds, appears an error and can' t reproduced it.
I have an android TV Box MXQPro.
¿ there is any recent version o somebody knows how can I make it run?

Mecool KI PRO Hybrid Android TV Box with Amlogic S905D SoC, DVB-T2 & DVB-S2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://www.youtube.com/watch?v=obdSDicvO0E
Mecool KI Pro specifications:
SoC – Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU
System Memory – 2 GB DDR4
Storage – 16GB eMMC flash + micro SD card slot up to 32GB
Video Output – HDMI 2.0a up to 4K @ 60Hz with support for HDR10 and HLG, and 3.5mm AV (composite video) jack
Audio Output – HDMI, AV (stereo audio), optical S/PDIF
Video Codecs – 10-bit H.265, and VP9 Profile 2 up to 4K60, H.264 up to 4K30, AVS+ and other codecs up to 1080p60
Tuner – DVB-T/T2 and DVB-S/S2 tuners with two connectors
Connectivity – Gigabit Ethernet, dual band 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.1 LE
USB – 4x USB 2.0 host ports
Misc – Power button and LED, IR receiver
Power Supply – DC 12V/1A
Dimensions – 130 x 120 x 32 mm
Weight – 163 grams
Rom stock KI_PRO_AVL6862-NMF26Q-20170519.183520.V0321.img
http://www.mediafire.com/file/dsblq20l4b40z6h/software.rar
firmware zip
https://yadi.sk/d/WRzrVAlf3K4xwu
or
https://mega.nz/#F!PMEDmawA!iWV_wj3ecbb_knRU6BLApg
$79.99 on gearbest
Do you think they will update to 7.1 also the Kii and KIII?
catorcio said:
Do you think they will update to 7.1 also the Kii and KIII?
Click to expand...
Click to collapse
I think not but it is possible to install its firmware on the k1 plus and kii pro because it is the same family cpu s905
I was waiting for one of these boxes with the S905D to show up
If anyone already has hands on one of them I would love to know if Amlogic fixed the 1.5GHz problem for the CPU and if really DDR4 memory is installed.
https://www.youtube.com/watch?v=obdSDicvO0E
I have seen the same receiver in aliexpres with android 6.0 or android 7.1
What do you think about that android version is better for this receiver?
Thanks
According to the website of cnx-software.com
the last firmware is android 7.0 but the date corresponds to the month of May and the new tvbox will have android 7.1 of the month of June with Google Widevine Level 1 for watch Netflix and Hbo in HD
Enviado desde mi Redmi Note 3 mediante Tapatalk
I bought one of these box
I bought one of these box specially for DVB-C cable but I've been trying scanning for channels is not picking up nothing at all when I plug my amiko mini combo and scan I get all the channels with no problems anyone else having the same problem
also on satellite there is delay of sound you will see the person talking and the sound will come after between 2 to 3 seconds delay it is such annoying I hope they fix this problem
KII-Pro said:
I bought one of these box specially for DVB-C cable but I've been trying scanning for channels is not picking up nothing at all when I plug my amiko mini combo and scan I get all the channels with no problems anyone else having the same problem
also on satellite there is delay of sound you will see the person talking and the sound will come after between 2 to 3 seconds delay it is such annoying I hope they fix this problem
Click to expand...
Click to collapse
contact support [email protected]
algdu83 said:
contact support [email protected]
Click to expand...
Click to collapse
ok I will do thanks
but anybody have the same box and having this problem
KII-Pro said:
ok I will do thanks
but anybody have the same box and having this problem
Click to expand...
Click to collapse
i dont have this problème in sat
test this dtv from my k pro
http://www.mediafire.com/file/ldcna01clgciz73/DTV-K_PRO.apk
algdu83 said:
i dont have this problème in sat
test this dtv from my k pro
http://www.mediafire.com/file/ldcna01clgciz73/DTV-K_PRO.apk
Click to expand...
Click to collapse
yes still having the same problem I'm still having the sound delay between 1 to 2 seconds and also I have a friend of mine has got the same problem my friend said to me that he cannot pick up nothing from cable no channels at all
I think the problem is with hd channels. When you get delay, you change to other channel and return to delayed channel, you watch if it solve the problem.
Marpemim said:
I think the problem is with hd channels. When you get delay, you change to other channel and return to delayed channel, you watch if it solve the problem.
Click to expand...
Click to collapse
yes that's what he goes after 3 minutes watching the channel then he will go out of sync after 3 minutes then I swap the channel works fine for a little bit and does it again goes out of sync between one and two seconds on HD channels,
after watching channel for more than 3 minutes then we'll start going out of sync does it from 1 to 2 seconds delay for example if you are watching BBC News HD you will see the person talking and doesn't match with the sound
I done a factory reset just to check to see if this fix the problem and still having the same problems, when you state more than 3 minutes channel still going out of sync you will see the person moving his lips then you will hear the sound 2 seconds later
Yes y have a little delay in HD channel, if change audio options to mpeg2 work better
Enviado desde mi m3 note mediante Tapatalk
AGOMEZ83 said:
Yes y have a little delay in HD channel, if change audio options to mpeg2 work better
Enviado desde mi m3 note mediante Tapatalk
Click to expand...
Click to collapse
yes I hope they fix this annoying problem
even does it on cable and you cannot select audio options to mpeg2 there is only one ( AC3 ) but from time to time still does it on SD channels
otherwise is brilliant box
KII-Pro said:
yes I hope they fix this annoying problem
even does it on cable and you cannot select audio options to mpeg2 there is only one ( AC3 ) but from time to time still does it on SD channels
otherwise is brilliant box
Click to expand...
Click to collapse
I sent mail to videostrong for this problem with audio
Enviado desde mi m3 note mediante Tapatalk
AGOMEZ83 said:
I sent mail to videostrong for this problem with audio
Enviado desde mi m3 note mediante Tapatalk
Click to expand...
Click to collapse
Waits and Hope!
catorcio said:
Waits and Hope!
Click to expand...
Click to collapse
I try it, in audio settings change auto to HDMI and select best transponder ...
Enviado desde mi m3 note mediante Tapatalk

TVision HUB

I couldn't find a specific forum thread for the TVision HUB but wanted to know if anyone here has experience with it and whether it has the ability to sideload apps?
I know it has ChromeCast capabilities and it's used for the TVision channel stream lineup but outside of that I know nothing else.
As a T-Mobile/Sprint customer, you can purchase the HUB & the remote for $49.99
I'm not interested in the TVision service as of yet but the device itself seems interesting (if it can be tweaked like a Chromecast or Firestick etc)
Here are the specs:
• Dimensions:
• 3.03" x 2.05" x 0.55"
• 17 oz (<0.5 kg)
• Processor
• Amlogic S905Y2 Chipset (Quad Core Cortex-A53 1.8 GHz CPU, 16560 DMIPS)
• Memory
• 2 GB RAM / 8 GB Flash
• Ports
• HDMI output, Micro USB for power only
• Software
• Current version: PI.4739
• Video Resolution
• 480i/p, 576i/p, 720p, 1080i/p and 4Kx2K
• SIM card
• none
• Wi-Fi:
• 802.11ac 2x2 MIMO 2.4 GHz and 5 GHz Wi-Fi
• Bluetooth:
• BLE version 4.2
• Voice support
• Yes, with Google Assistant
• TV compatibility
• HDMI enabled TV, 4K Ultra HD TV required for viewing 4K content
lok for firmwares for Amlogic S905Y2, S905X2 Might Work Too, Try To Figure Out If You Can Get Into Mask Rom Mode (To Recover From A Bricked Device), And Then Experiment
aidanmacgregor said:
lok for firmwares for Amlogic S905Y2, S905X2 Might Work Too, Try To Figure Out If You Can Get Into Mask Rom Mode (To Recover From A Bricked Device), And Then Experiment
Click to expand...
Click to collapse
Thanks I just want to know if apps can be sideloaded and / or whether it has access to the Play Store?
Sure there are other devices out there, but what I like about the TVision HUB is the remote
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I guess I can wait to see what others say as this is a fairly new thing that just came out
EL TEJANO said:
Thanks I just want to know if apps can be sideloaded and / or whether it has access to the Play Store?
Sure there are other devices out there, but what I like about the TVision HUB is the remote
I guess I can wait to see what others say as this is a fairly new thing that just came out
Click to expand...
Click to collapse
You Should Be Able To Sideload Apps On This, And The Google Play Store Should Be Installed (The Tv Version)
EL TEJANO said:
Thanks I just want to know if apps can be sideloaded and / or whether it has access to the Play Store?
Sure there are other devices out there, but what I like about the TVision HUB is the remote
I guess I can wait to see what others say as this is a fairly new thing that just came out
Click to expand...
Click to collapse
This may be a newly released device from TMobile but it, being an officially certified legit AndroidTV device, shares all the capabilities of other devices on market. Google, Verizon, Xiaomi, Dynalink, nVidia et al all have similar products that are very popular and that share similar capabilities. That's what standards are all about. 99% of core features are replicated with a few minor variations added along the way.
As to your sideload question, of course you can sideload phone/tablet apps. Bear in mind, non AndroidTV apps sideloaded won't show on your home screen. You can access them under apps menu or you can tweak system by installing sideload launcher from the playstore. This will allow them to appear on home screen/desktop of your device.
You may consider /r/androidtv forum on reddit.com as it focuses exclusively on the official androidTV variants of tv boxes
Good luck
yes i have the device, bought it from tmobile. it has a play store and you can remote in with ADBLink and add files. Id suggest going into the play store to grab a file manger and then you can explore the device directories. the service itself is actually very good. we canceled cox cable.
So with Tvision ending and Youtube TV not working on this device, there is an alternative, but that is if we can get this to actually work correct. Here at Xda developers Project Slimbox is for Amlogic devices and I believe they have a device working with the S905Y2 processor. it would be nice to see if we could actually get that working on this device. Tmobile told me that they will be giving account credit for each person that purchased one of these devices.
I was able to get the block names, but as you know there is no external sdcard so it makes it difficult to backup partitions or anything else. I was able to connect to it via adb wifi with no issue.

Maru OS (Android 10) running on Xiaomi Mi 8 - dipper

Hi everybody,
I managed to successfully port and build Maru OS for our Xiaomi Mi 8 based on Android 10 Lineage OS sources.
Everything is working perfectly and performance is really good in desktop mode.
Currently the only issue is that selinux is set to permissive and needs to be fixed for production ready builds.
Basically its an Android build with a LXC debian container built in. As soon as you activate screen sharing or hook up a DisplayLink dock, it starts the desktop environment onto the second screen. It's using a graphical bridge between Debian container and Android system which writes data directly to SurfaceFlinger. This makes the desktop experience extremely good and fluent (not comparable to VNC for example).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dude that's amazing, can you share the rom?
mi_guel said:
dude that's amazing, can you share the rom?
Click to expand...
Click to collapse
Great to hear that someone else also likes the idea of using the phone as desktop device.
Yes, I can do that. But first I need to prepare the Github repository as the source code needs to be fully published before releasing a ROM I think. Currently everything is setup locally for development and testing.
That 's great! Which adaptor are you using? Is there anyone with usb hub and charging simultaneously?
chrisgrns said:
That 's great! Which adaptor are you using? Is there anyone with usb hub and charging simultaneously?
Click to expand...
Click to collapse
Since this phone doesn't support native HDMI output, you need to use a DisplayLink docking station which requires the DisplayLink application installed on the device. I'm using the HP USB-C Universal Dock (hsa-b005ds). If I remember correctly charging and using my mouse and keyboard simultaneously connected via USB worked without any problems.
mtdshare said:
Since this phone doesn't support native HDMI output, you need to use a DisplayLink docking station which requires the DisplayLink application installed on the device. I'm using the HP USB-C Universal Dock (hsa-b005ds). If I remember correctly charging and using my mouse and keyboard simultaneously connected via USB worked without any problems.
Click to expand...
Click to collapse
But you can use a chromecast, right?
mi_guel said:
But you can use a chromecast, right?
Click to expand...
Click to collapse
Yes, you can use the Android in built screen sharing capability. But probably there will be some small delays due to network latency.
Ias it Avalible, I want to try it thanks.
Also keen to test.
@mtdshare Please share your build with us thanks. Or you could tell us the method you made this. I really want to try it out.
mtdshare said:
Since this phone doesn't support native HDMI output, you need to use a DisplayLink docking station which requires the DisplayLink application installed on the device. I'm using the HP USB-C Universal Dock (hsa-b005ds). If I remember correctly charging and using my mouse and keyboard simultaneously connected via USB worked without any problems.
Click to expand...
Click to collapse
Just to be clear; you managed to use the displaylink dock as "secondary monitor", or did you just run the LXC container fullscreen with your display mirrored via displaylink?
I've been looking for a while to get displaylink to act as a secondary monitor rather than (half-assed) mirror my phone to my monitor. It would be really awesome to run (even the build-in android desktop) on a device with a displaylink dock attached.
Skorm92 said:
Just to be clear; you managed to use the displaylink dock as "secondary monitor", or did you just run the LXC container fullscreen with your display mirrored via displaylink?
I've been looking for a while to get displaylink to act as a secondary monitor rather than (half-assed) mirror my phone to my monitor. It would be really awesome to run (even the build-in android desktop) on a device with a displaylink dock attached.
Click to expand...
Click to collapse
Exactly, the LXC container is running on the external monitor via DisplayLink. At the same time you can use the Android system on the phone screen as usual.
MilkywayOpenSource said:
@mtdshare Please share your build with us thanks. Or you could tell us the method you made this. I really want to try it out.
Click to expand...
Click to collapse
Sorry for my late reply, I have been busy the last weeks. I will share the ROM or tutorial for compiling it very soon.
mtdshare said:
Sorry for my late reply, I have been busy the last weeks. I will share the ROM or tutorial for compiling it very soon.
Click to expand...
Click to collapse
Skorm92 said:
Thank you for responding.
It's really awesome you got it working like that! I've only seen this demo'd by DisplayLink themselves using a custom build rom they only want to provide to influencers and companies (source, see reply to top comment)
Would something like this also be achievable using magisk modules (or any other form of root method/drivers)? You would really be my superhero if you could help me out on achieving this.
Click to expand...
Click to collapse
Hey.....we are still waiting for the ROM and tutorial.....
Can this ROM be ported to Samsung devices
spice mwenda said:
Hey.....we are still waiting for the ROM and tutorial.....
Click to expand...
Click to collapse
You can also consider asking nicely (and not by spamming the thread.)
Also; he already said that he is and has been busy, have patience!
Hi there! Great to hear that MaruOS is working on dipper. Could you please share built ROM, or at least share sources?
Sir still waiting for this rom and tutorial
I was wondering since maru os is based on linage is it possible to sideload linage os 18.1 to it
Waiting for this since a long time ago

General Sony MUST Read (Xperia 1 III and GP-VPT2BT)

Hello readers!
I am an owner of a Sony Xperia 1 III. Recently I purchased one Sony Bluetooth Shooting Grip GP-VPT2BT and I realized that I can NOT use it with the video app on my phone. Interestingly enough, such a device is fully compatible with the Xperia Pro-I and can be paired in Video Pro app\Settings\Maintenance\Bluetooth Remote Control. The Sony Cinema Pro app (the stock app for the video that came with Xperia 1 III) lacks the Maintenance section under the Settings, therefore it cannot be paired.
Sony, would you be so kind to issue an update for the Sony Cinema Pro app, the Xperia 1 III version, and add the Maintenance and Remote Control options? We (the Xperia 1 III owners) spent so much money on the phone and on the grip and I don't see why you don't let us use them together for the stock video app.
Thank you!
​
AmataLudu said:
Hello readers!
I am an owner of a Sony Xperia 1 III. Recently I purchased one Sony Bluetooth Shooting Grip GP-VPT2BT and I realized that I can NOT use it with my phone. Interestingly enough, such a device is fully compatible with the Xperia Pro-I and can be paired in Video Pro app\Settings\Maintenance\Bluetooth Remote Control. Although my phone has the Sony Video Pro app, my app lacks the Maintenance section under the Settings.
Sony, would you be so kind to issue an update for the Sony Video Pro app, the Xperia 1 III version, and add the Maintenance and Remote Control options? We (the Xperia 1 III owners) spent so much money on the phone and on the grip and I don't see why you don't let us use them together (it is not like we are trying to pair a Samsung grip to a Sony phone... both items are your brand!). Why discriminate between a model's users and another model's users? Aren't we all part of the big Sony family?
Thank you!
​
Click to expand...
Click to collapse
I have Video Pro in my Xperia 1 III. The Maintenance section with the Bluetooth Remote Control is there right at the bottom of the menu. I don't have a Bluetooth remote or the shooting grip to test it, but I can assure you that section is available and useable. Are you sure you have the latest version of Video Pro?
Hi Shinku. Thank you for your input. The last thing in the menu of my Cinema Pro app is "Accessibility" and "Tips" before that. I don't have "Maintenance". My app' s version is 1.5.1.A.0.7. Do you know how to update the app?
Thank you!
AmataLudu said:
Hello readers!
I am an owner of a Sony Xperia 1 III. Recently I purchased one Sony Bluetooth Shooting Grip GP-VPT2BT and I realized that I can NOT use it with my phone. Interestingly enough, such a device is fully compatible with the Xperia Pro-I and can be paired in Video Pro app\Settings\Maintenance\Bluetooth Remote Control. Although my phone has the Sony Video Pro app, my app lacks the Maintenance section under the Settings.
Sony, would you be so kind to issue an update for the Sony Video Pro app, the Xperia 1 III version, and add the Maintenance and Remote Control options? We (the Xperia 1 III owners) spent so much money on the phone and on the grip and I don't see why you don't let us use them together (it is not like we are trying to pair a Samsung grip to a Sony phone... both items are your brand!). Why discriminate between a model's users and another model's users? Aren't we all part of the big Sony family?
Thank you!
​
Click to expand...
Click to collapse
I know, it's really a bad thing BUT...sony support site for that grip show no compatibility, even with the PRO-I. It work? Good, but you forgot to search for info before buying it.
Unsupported things could work but obviously if not working you are done.
It's intended (and reported on official site) only for compact camera, mirrorless and other "real" camera
AmataLudu said:
Hi Shinku. Thank you for your input. The last thing in the menu of my Cinema Pro app is "Accessibility" and "Tips" before that. I don't have "Maintenance". My app' s version is 1.5.1.A.0.7. Do you know how to update the app?
Thank you!
Click to expand...
Click to collapse
I believe you mistaken the Cinema Pro app for the Videography Pro app. Based on your version, you are using the Cinema Pro app. For reference, my Cinema Pro app is version 1.5.1.A.0.9. It does not have the Bluetooth Remote Control option. I don't see it on my Cinema Pro app.
The option is available on the Videography Pro app (That's the official full name) and is only officially available on the Xperia Pro-I. However, you can grab the Videography Pro apk from APKMirror and install it onto the Xperia 1 III. Note that some functions may not work and that it maybe a little buggy as it was not designed to work on the Xperia 1 III. But overall it is useable. Latest version as of this post is 1.0.1.A.0.18
Heres a link:
Download Videography Pro APKs for Android - APKMirror
Download Videography Pro APKs for Android - APKMirror Free and safe Android APK downloads
www.apkmirror.com
Evil_Sephiroth said:
I know, it's really a bad thing BUT...sony support site for that grip show no compatibility, even with the PRO-I. It work? Good, but you forgot to search for info before buying it.
Unsupported things could work but obviously if not working you are done.
It's intended (and reported on official site) only for compact camera, mirrorless and other "real" camera
Click to expand...
Click to collapse
There is an official guide by Sony on the Xperia Pro-I support page.
https://www.sony.com/electronics/support/mobile-phones-tablets-mobile-phones/xperia-pro-i/articles/00274315
Found another article that specifically says:
Note: GP-VPT2BT and RMT-P1BT can be used with this Xperia phone. Please also check the instruction manual of the compatible device.
Click to expand...
Click to collapse
https://www.sony.com/electronics/support/mobile-phones-tablets-mobile-phones/xperia-pro-i/articles/00274614
AmataLudu said:
Hi Shinku. Thank you for your input. The last thing in the menu of my Cinema Pro app is "Accessibility" and "Tips" before that. I don't have "Maintenance". My app' s version is 1.5.1.A.0.7. Do you know how to update the app?
Thank you!
Click to expand...
Click to collapse
Thank you, Shinku! Got the link! You are awesome!
hotcakes_shinku said:
I believe you mistaken the Cinema Pro app for the Videography Pro app. Based on your version, you are using the Cinema Pro app. For reference, my Cinema Pro app is version 1.5.1.A.0.9. It does not have the Bluetooth Remote Control option. I don't see it on my Cinema Pro app.
The option is available on the Videography Pro app (That's the official full name) and is only officially available on the Xperia Pro-I. However, you can grab the Videography Pro apk from APKMirror and install it onto the Xperia 1 III. Note that some functions may not work and that it maybe a little buggy as it was not designed to work on the Xperia 1 III. But overall it is useable. Latest version as of this post is 1.0.1.A.0.18
Heres a link:
Download Videography Pro APKs for Android - APKMirror
Download Videography Pro APKs for Android - APKMirror Free and safe Android APK downloads
www.apkmirror.com
There is an official guide by Sony on the Xperia Pro-I support page.
https://www.sony.com/electronics/support/mobile-phones-tablets-mobile-phones/xperia-pro-i/articles/00274315
Found another article that specifically says:
https://www.sony.com/electronics/support/mobile-phones-tablets-mobile-phones/xperia-pro-i/articles/00274614
Click to expand...
Click to collapse
Thank you, Shinku! Got the link! You are awesome!
So it´s working with your Xperia 1 III? What type of smartphone hold you are using with?
With the IGP-VPT2BT, I use Videography Pro - as it is the only app that has the bluetooth remote, but, somtimes is buggy...
check back the link above every now and then for updates to the Videography Pro app.
with the latest update (May 1st) I feel it is more stable in the Xperia 1 III.
Still I wish it is made an official app instead. Maybe when the Xperia 1 IV comes out, that version will work better since the 1 III is more similar to the 1 IV than the Pro-I
And you both are using the VLOG monitor and holder? Or what kind of Smartphone holder you are using with the VPT2BT?
We need to see pictures of this kit !
SirRobin78 said:
And you both are using the VLOG monitor and holder? Or what kind of Smartphone holder you are using with the VPT2BT?
Click to expand...
Click to collapse
I just noticed this sorry. If you are referring to me, I am not using any bluetooth remote or vlog kit/monitor. I am just talking about my own experience of using the videography app by itself. As I quote myself in post no #2:
hotcakes_shinku said:
I don't have a Bluetooth remote or the shooting grip to test it, but I can assure you that section is available and useable.
Click to expand...
Click to collapse
When I mean useable I mean I can access the section, its not missing or greyed out or untapable, and I can toggle the Bluetooth remote option on and off. As also mentioned, I can't test it as i lack access to any bluetooth remote. This means while I can toggle it on and off , I can't verify if toggling the switch does anything on my end. He has to test that himself.
Please read the previous posts in a thread properly before making a reply. Don't be lazy so that you can avoid simple mistakes like this.
With the latest update, 1.1.A.0.22 which some say is from the new Xperia 1 IV, we can now access both telephoto lenses on the 1 III. My speculation came true. Now all thats left is a proper version for our 1 III.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
old vs new
Yes, that's correct! I noticed that, as well. Pretty stable, so far. Yes, a dedicated I III would be more assuring...However, I still await for an upgrade on CinemaPro to provide us with a bluetooth conectivity (remote option).
So this does still not work, right?
CinemaPro - No, does not work
Videography - Yes, it works
For those looking to try the Vlog Monitor, I suggest to not do it. I do not have one with me so I can't test it, but from reddit, there is a person trying it out and it is not working for him.
I'm guessing that the Vlog Monitor is using UVC or USB video device class to communicate with the phone, not HDMI/Display port. Meaning a phone wanting to display an image to the Vlog Monitor must support UVC output via its usb c port. This is the same protocol that webcams use to communicate with Computers. While the 1 III can output video via USB C to HDMI for example, it is possible that UVC output capability was only added when they came up with the Pro-I, and was subsequently added to the 1 IV. Therefore unless Sony decides to add the feature via an update to the 1 III, we may never see it work unless someone else adds it, maybe using a custom rom or rooting/magisk.
As for those wondering how I came up with this it is pretty simple. Remember how Sony advertised the 1 III can be used as an additional monitor for some of their cameras. Those cameras needed to support UVC output as well. They output an image via UVC to the External Monitor app on the 1 III. If you try to connect your phone to a computer let's say, via hdmi or display port, it doesn't work, you can't use your phone as an external monitor this way.
As mentioned i'm merely guessing, and it maybe possible that Sony is just being an ass and whitelisting only two phones it detects to work with the Vlog Monitor.

Categories

Resources