USE ONLY ON J4. CHECK YOUR FIRMWARE VERSION.
Root method for FOJ4 / 5.1.1 for the G900T THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
SuperSu.apk
A stock build prop with secure storage set to false so wifi passwords and etc aren't forgotten after reboots. (Now Included in the Odin tar as well)
Kernel set to permissive
Disabled CRC
Increased entropy read and write levels
Otherwise stock
So here's the deal. Stupid simple.
TWRP Install:
1. Download the kernel
2. Flash in recovery (if twrp asks if you want to install su say NO)
3. Reboot and profit.
Odin tar.md5 Install:
1. Phone in download mode
2. Load tar in AP slot
3. Connect phone
4. Flash it
5. Download SuperSU from playstore
6. Profit
If you need more detailed help go HERE
Downloads
Do NOT Mirror Links
Links removed for now til Samsung reuploads J4 source
Mine
Hell, I'll be 1st......
Nice bro always on top of the Game!!!!
For some reason i get a camera error and camera crashes after flashing this. When i flash back to the G6 TrapKernel the camera works fine. Im on J4 bootloader, baseband, and rom. Any suggestions?
destructionj said:
For some reason i get a camera error and camera crashes after flashing this. When i flash back to the G6 TrapKernel the camera works fine. Im on J4 bootloader, baseband, and rom. Any suggestions?
Click to expand...
Click to collapse
Congratulations. For being the first to mention it out of 50 something downloads. I've known since I've built it. Did it on purpose to see how many downloads would give feed back. You're the first. I'll send send you one that doesn't break the camera hopefully tomorrow. Thank you for the feedback.
Now the rest of you wonder why the tmobile s5 hasn't seen sh** for development.
I need a functional camera! Didn't even notice until someone said something. Your kernels typically just work! I need my cam though for my son's basketball game!
Sent from my SM-G900T using Tapatalk
My camera isn't working, but it appears that the flashlight isn't working also. Does this make sense? I'm using the Tesla LED app.
Chuki82 said:
I need a functional camera! Didn't even notice until someone said something. Your kernels typically just work! I need my cam though for my son's basketball game!
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
OG6 trapkernel has been my temporary "goto" fix and has worked well for the rom i run.
LDL707 said:
My camera isn't working, but it appears that the flashlight isn't working also. Does this make sense? I'm using the Tesla LED app.
Click to expand...
Click to collapse
Yep my flashlight broke too after kernel flash.
destructionj said:
OG6 trapkernel has been my temporary "goto" fix and has worked well for this rom.
Click to expand...
Click to collapse
What is the benefit to using the OJ4 trapkernel over the OG6 trapkernel? I feel like there has to be some drawback to using the old one, or else there wouldn't be a new one.
LDL707 said:
What is the benefit to using the OJ4 trapkernel over the OG6 trapkernel? I feel like there has to be some drawback to using the old one, or else there wouldn't be a new one.
Click to expand...
Click to collapse
I honstly dont know but i did say temporary and just reporting that i haven't found a limit on functionality as of yet, however that dont mean they don't exist. Keep in mind that this is just the workaround i used. Also, the dude already said hes gunna fix the oj4 kernel, so im just hanging tight with the temporary fix in place.
I should also add that i have been running the OG6 trap for over a week with no problems on the rom i am using.
So heres the deal. I think Samsung posted old ass source. Possibly F6 source as J4. SInce F6 broke G6's camera and visa versa yet G6 trap kernel doesnt break J4's camera but J4's source breaks j4s camera
well
ShinySide said:
So heres the deal. I think Samsung posted old ass source. Possibly F6 source as J4. SInce F6 broke G6's camera and visa versa yet G6 trap kernel doesnt break J4's camera but J4's source breaks j4s camera
Click to expand...
Click to collapse
j4 is basically og6 i see no improvements
also wouldnt it work if i replace the vendor/libs with og6 libs (camera ) temporary fix
malbert16442 said:
j4 is basically og6 i see no improvements
also wouldnt it work if i replace the vendor/libs with og6 libs (camera ) temporary fix
Click to expand...
Click to collapse
Possibly but what's the point if you can just use G6 kernel
ShinySide said:
Possibly but what's the point if you can just use G6 kernel
Click to expand...
Click to collapse
True so are you going to shut down thread and I guess just work on g6 kernel
Sent from my SM-G900T using Tapatalk
malbert16442 said:
True so are you going to shut down thread and I guess just work on g6 kernel
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Just removed the links for now. Emailed Samsung and told them to reupload j4 source
malbert16442 said:
j4 is basically og6 i see no improvements
also wouldnt it work if i replace the vendor/libs with og6 libs (camera ) temporary fix
Click to expand...
Click to collapse
Aside from stagefright edits. OJ4 passes the stage fright detector scan and OG6 dont.
As meaningless as it may seem, one reason i moved up was just to pass that little stagefright scan lol.
destructionj said:
Aside from stagefright edits. OJ4 passes the stage fright detector scan and OG6 dont.
As meaningless as it may seem, one reason i moved up was just to pass that little stagefright scan lol.
Click to expand...
Click to collapse
I could always give you the new libs and both of my roms are protetcted 9.7 and 2.5
Sent from my SM-G900T using Tapatalk
malbert16442 said:
I could always give you the new libs and both of my roms are protetcted 9.7 and 2.5
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Your roms are great but a bit more modded then i need. I dont use half of the stuff in them also some of the things i used on a daily basis were removed. I keep my eye on your threads on a daily bassis and enjoy your work. I have my eye on the 2.5 if wifi calling integration can happen
sorry off thread topic my bad.
Look what I found in the j4 build prop......
ro.build.display.id=LMY47X.G900TUVS1FOJ4
ro.build.version.incremental=G900TUVS1FOJ4
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1.1
ro.build.version.security_patch=2015-10-01
ro.build.version.base_os=samsung/kltetmo/kltetmo:5.1.1/LMY47X/G900TUVU1FOG6:user/release-keys
ro.build.date=Tue Oct 27 19:43:18 KST 2015
Related
This kernel will be kept simple and inline with stock and free from buzzfree stuff..as the aim is a stable day-to-day use kernel..this kernel is NOT for those who want to break records..as i do not believe and rely on benchmarks..(its me..)
Disclaimer:
i nor xda would be at fault if something weird beyond my test results happen to your phone..also this is not a benchmark kernel..if you like crunching numbers and breaking records go use another kernel..this is meant to save juice and be efficient and stable as a daily driver for Samsung based ROMS..
Features:
- Based on i9205/i9195 source from Samsung OSRC(Thanks for the borked source)
- Fixed a few things left by Samsung to be broken
- Simple and no fancy stuff thats gonna bork your phones..more stuff does not guarantee it's better..
- User voltage control from faux123 for Krait CPU's..
- EXFat support(by Samsung OSRC..)
- OC(if already stable)
- will populate more as things get stable
- Selinux permission is set from enforcing to permissive via ramdisk
- insecure boot image
- Disabled Rooting security measures implemented by Samsung..
Pre-requisites
- Install busybox via CWM or via Playstore before installing my kernel..this is to make sure init.d and also some scripts work properly..
Downloads here: Test build 5(ML1 Ramdisk)
My git: source
Credits:
- noone in particular but thanks to ALL the wonderful devs here in XDA..
If you like the builds please help me get a Soda/pay bills..or the least is just hit the Thanks Button..
one more in case..
uploading..
please report/feedback on any issue you might encounter..please do provide logs(last_kmsg, logcats, dmesg...etc..) so that i can shoot things out..i do not own the device yet and surely things can go wacky along the way..
TIA
kindly someone report if the build boots up..
What do you mean with those features?
- Fixed a few things left by Samsung to be broken
- Removed most of the crappy and buggy stuff..
- GPU Idling fix..
Click to expand...
Click to collapse
I cannot see them on your sources
Grarak said:
What do you mean with those features?
I cannot see them on your sources
Click to expand...
Click to collapse
will push them tomorrow(just have to know if the build boots or not)..samsung left an issue on the video drivers for ebook mode(scenario mode)..which can hinder compilation..why so curious?? you're the idol..
kairi_zeroblade said:
will push them tomorrow(just have to know if the build boots or not)..samsung left an issue on the video drivers for ebook mode(scenario mode)..which can hinder compilation..why so curious?? you're the idol..
Click to expand...
Click to collapse
I was curious how you described these features. If it's only an e book reader issue, you cannot call it remove crappy stuff by samsung.
Sent from my Galaxy Nexus using xda app-developers app
Grarak said:
I was curious how you described these features. If it's only an e book reader issue, you cannot call it remove crappy stuff by samsung.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
ok so if it bothers you then i will ninja edit it then..its just a general template i used on my previous OP..dont be so harsh on me..
update: edited it to "fit" your standards.. (what a way to welcome me here........now i can go to bed..and get my beauty sleep.. )
update: good morning guys!! any reports or comments if it boots up?? need feedbacks so i can start pushing more stuff..
I tried it on a I9200.
Device boots
No wifi
Lost root
For some reason, Google+ stopped working
Logcat attached.
Silesh.Nair said:
I tried it on a I9200.
Device boots
No wifi
Lost root
For some reason, Google+ stopped working
Logcat attached.
Click to expand...
Click to collapse
thanks will invetigate the logs provided..can you upload a stock image of the i9200 btw??so i can check if there are specific differences from the ramdisk of the i9200 from i9205..afaik aside from the LTE there should be other differences from them..
re: root it might have been because of the ramdisk i used..can you shift to Koush's superuser??chainfire's supersu has been finicky with my HTC 4.3 update but Koush's never had a glitch..
Thank you very much for the feedback!!
edit: get the SuperUser by Koush here
Stock MJ1 I9200 boot image attached. I'll let you know if I succeed to root.
Silesh.Nair said:
Stock MJ1 I9200 boot image attached. I'll let you know if I succeed to root.
Click to expand...
Click to collapse
can you pull me a last_kmsg from my kernel??it seems there is a hardware initialization issue..TIA
kairi_zeroblade said:
can you pull me a last_kmsg from my kernel??it seems there is a hardware initialization issue..TIA
Click to expand...
Click to collapse
Attached.
Silesh.Nair said:
Attached.
Click to expand...
Click to collapse
ok nailed down the culprit..will release a new test build in a few minutes thanks Silesh..it seems i was missing a few stuff..
kairi_zeroblade said:
update: new test build here OP updated as well
kindly test and provide feedback so i can push more stuff in..i have to do alot more maintaining also to my git..
Click to expand...
Click to collapse
I am testing my slimkat build. Will flash and let you know in an hour.
Silesh.Nair said:
I am testing my slimkat build. Will flash and let you know in an hour.
Click to expand...
Click to collapse
thank you it seems i made a minor derp..will fix it now..and upload a new kernel.
OK. When you upload, mention me so that I get a noification. Else I need to check the thread often.
Silesh.Nair said:
OK. When you upload, mention me so that I get a noification. Else I need to check the thread often.
Click to expand...
Click to collapse
update: get test build 3 here
kairi_zeroblade said:
update: get test build 3 here
Click to expand...
Click to collapse
Still no wifi. Root works, both SuperSU and Koush. Logs attached.
Silesh.Nair said:
Still no wifi. Root works, both SuperSU and Koush. Logs attached.
Click to expand...
Click to collapse
ok got it..will switch to the ML1 ramdisk you gave me..will post a new build in a few minutes..
edit: it seems i was messing with the UCNA2 update with SELINUX..thats why i was borking things..i am now using the ML1 ramdisk..
@silesh
new build up..here
Root method for lollipop for the SM-A700F THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
1. Put Phone in Download mode
2. Open Odin
3. Connect Phone
4. Put Kernel in AP Slot
5.Flash it
6. Reboot and profit
Notes:
Download SuperSu from the Playstore. Its not included.
If at first it doesnt boot,hold the power button til it shuts off and reboot.
To fix wifi passwords= Open build.prop and change ro.securestorage=true to ro.securestorage=false
Download
Do NOT mirror this link. Period.
TrapKernel SM-A700F
Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6.
@XperiaNoobie & @nino64 for testing
@Chainfire for SuperSU
Heres the source with it set to permissive if anyone wants to fork it and build a kernel that allows root.
https://github.com/ShinySide/SM-A700F
1 Post
Rooted!! works perfectly!
Thank you very much.
Will there be any further development ?
XperiaNoobie said:
Will there be any further development ?
Click to expand...
Click to collapse
Maybe maybe not. Depending on how easy I can bring features over from my HispAsian kernel. I just hate messing with devices I don't have.
ShinySide said:
Maybe maybe not. Depending on how easy I can bring features over from my HispAsian kernel. I just hate messing with devices I don't have.
Click to expand...
Click to collapse
Well in any case you have to know that me and many other guys here will be happy to assist you by testing out your work Just please don't leave us hanging here, no one gave us attention before you
Sent from my SM-A700F using XDA Free mobile app
Private mode not work
ShinySide said:
Maybe maybe not. Depending on how easy I can bring features over from my HispAsian kernel. I just hate messing with devices I don't have.
Click to expand...
Click to collapse
I believe that the problem of non-operation of the private mode is attributed to the kernel, you can do something?:crying:
nino64 said:
I believe that the problem of non-operation of the private mode is attributed to the kernel, you can do something?:crying:
Click to expand...
Click to collapse
Actually root. Nothing to do with actual kernel
Works great. Finnaly root for SM-A700F on lollipop.
Now only thing we need is TWRP or CWM for SM-A700F
ShinySide said:
Actually root. Nothing to do with actual kernel
Click to expand...
Click to collapse
you need some files to fix the bug ?
ShinySide said:
Actually root. Nothing to do with actual kernel
Click to expand...
Click to collapse
I just wanted to say thank you for this man, you're awesome for doing this kenrel and root, especially since you don't even have the device.
If you ever need a tester for something for this device I volunteer as a tribute
nino64 said:
I believe that the problem of non-operation of the private mode is attributed to the kernel, you can do something?:crying:
Click to expand...
Click to collapse
Hey after some research i found out that when your SE is set to permissive you lose the privilege of the private mode as it suggests that your phone isn't safe :/ You can use third-party apps so you can lock your apps though :/
Hi,
Just rooted my Phone. Working like a charm.
But is there a way to remove the Knox nonsense completely? Getting messages from security center or whatever.
Can that sh*t be removed completely?
Greetz Matt
EDIT* Never Mind. Removed the Samsung Smart Manager
mmarkvoort said:
Hi,
Just rooted my Phone. Working like a charm.
But is there a way to remove the Knox nonsense completely? Getting messages from security center or whatever.
Can that sh*t be removed completely?
Greetz Matt
EDIT* Never Mind. Removed the Samsung Smart Manager
Click to expand...
Click to collapse
Thanks I was already looking for this.. where can I find the app? I can't find it :silly:
bugsbunny17 said:
Thanks I was already looking for this.. where can I find the app? I can't find it :silly:
Click to expand...
Click to collapse
I used System App Remover Root. There you can delete root apps.
I delete Smart Manager, and you also have to delete Security Log thing. Otherwise you will keep getting messages.
Now I only need to find out if I can just delete Knox stuff too whats in there.
mmarkvoort said:
I used System App Remover Root. There you can delete root apps.
I delete Smart Manager, and you also have to delete Security Log thing. Otherwise you will keep getting messages.
Now I only need to find out if I can just delete Knox stuff too whats in there.
Click to expand...
Click to collapse
I deleted Samsung Smart manager, but what do you mean with Security log? there are so many apps with security in the name haha
bugsbunny17 said:
I deleted Samsung Smart manager, but what do you mean with Security log? there are so many apps with security in the name haha
Click to expand...
Click to collapse
If you get the notification you longpress it and click the questionmark. Then you see the exact name.
In System App Remover its near the bottom of the list. Its a key module.
Sent from my SM-A700F using XDA Free mobile app
Working root, thanks a lot!
A700FD
can u develop a kernel (for overclocking) for A700FD ???
rasik107 said:
can u develop a kernel (for overclocking) for A700FD ???
Click to expand...
Click to collapse
Probably not. I don't own the device and normally don't do things for devices I don't own. I just did this because I hit up a couple devices because I had some free time
Discontinued
Warning - ChangeLog - Requirements - Installation - Download - Source
Discontinued
Help and FAQ
Discontinued
My pleasure to be the first one in OP !
With wishful regards to my brother, UpInTheAir for his hard work I'm writing to inform people around about the biggest problems I've experienced with this kernel since MM.
I was afraid of flashing stock ROM, hence I waited about a week to have a debloated/tested custom ROM.
Once one came out, I had to have both bootloader and modem flashed to make custom MM ROM working, I did and everything seemed to be happy at the moment but problems started to ruin my head (some of them still exist although)
I had problems with sudden screen off with the only solution of hard rebooting, Synapse couldn't be working and this kernel is much more power with synapse.
Any how, after 2 weeks of pain I tested something stupid which worked for me.
I flashed a stock ROM with odin, then flashed TWRP 3 and then a custom rom and at the end kernel flashing procedures. the only problem which still exists is charging while phone is off or even rebooting from recovery/bootloader while phone is pluggen in with USB cable.
Everything else is working so fine.
I really recommend to flash a STOCK ROM instead of BL/MODEM only.
by the way, since presence of supersu 2.68 so many issues have gone as well which wasn't available at the time of initial releases of SkyHigh nor Marshmallow for Samsung.
congratulation
Sent from my SM-N920I using Tapatalk
---------- Post added at 10:47 AM ---------- Previous post was at 10:47 AM ----------
carlitobahsoun said:
congratulation
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
iam number 2 posting lol
Sent from my SM-N920I using Tapatalk
You are doing a truly phenomenal work with the kernel. Updating to MM thanks to you!
reza_243 said:
My pleasure to be the first one in OP !
Where is download link ?
so, does it mean I dare to flash 6.0.1 with odin and flash this kernel to have the latest Mashrmallow without deep sleep issue, lagging and any battery draining culprits recently introduced in samsung MM based on rooting ?
my main reason to migrate to MM is absolutely Doze feature to get rid of some battery draining issues in LP and because of BPB6 bootloader I'm afraid of flashing MM until I certainly be sure about having all features I had in LP.
By the way, why SELinux is enforcing ? any technical limitation? any solution to set it to permissive ?
Amount of software I'm using are extremely SELinux dependent and I hate any kind of SELinux, KNOX and restrictions in Android OS.
Click to expand...
Click to collapse
Geez . . .impatient. I am preparing the thread !!! It takes time
If you didn't like MM, easy enough to downgrade again
Enforcing for now, features added later. Hopefully, something like my 5.1.1 kernel
For now, you can use SELinux Mode Changer app to set permissive (if needed). It think it reset after reboot.
I'm tired . . .
That was fast!
FEEDBACK: The Kernel works nicely and Root is also working!
Just exact steps from post #2.
Bootloop is normal for few mins
SM-N920CD (dual sim) users also can use this?
AlirezaKhodaei said:
SM-N920CD (dual sim) users also can use this?
Click to expand...
Click to collapse
I don't see why not. N920CD can usually be used with N920C, such as with my other kernels.
thanks dude... i have other question... you going to update this version? i want stock as possible !!! so i want to know in further version is there changes ? or i just flash this?
Mohammed779 said:
That was fast! Downloading now to test and will give a feedback soon! Many thanks!
Click to expand...
Click to collapse
waiting ur feed back....iam still on lollipop
Sent from my SM-N920I using Tapatalk
UpInTheAir said:
Geez . . .impatient. I am preparing the thread !!! It takes time
If you didn't like MM, easy enough to downgrade again
Enforcing for now, features added later. Hopefully, something like my 5.1.1 kernel
For now, you can use SELinux Mode Changer app to set permissive (if needed). It think it reset after reboot.
I'm tired . . .
Click to expand...
Click to collapse
AlirezaKhodaei said:
thanks dude... i have other question... you going to update this version? i want stock as possible !!! so i want to know in further version is there changes ? or i just flash this?
Click to expand...
Click to collapse
Please read before posting . . .
That is a huge win! Is it possible to fix the sound issue with kernel? I have issu when playing games sound is too low and the performance atrocious
Derpling said:
That is a huge win! Is it possible to fix the sound issue with kernel? I have issu when playing games sound is too low and the performance atrocious
Click to expand...
Click to collapse
Can you please read a few of the previous replies. I will try to implement as many SkyHigh 5.1.1 features as possible. It's not going to happen in a day. Whether any fixes your "issues", who knows.
any feedback ?
Sent from my SM-N920C using Tapatalk
abo0ood said:
any feedback ?
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
carlitobahsoun said:
waiting ur feed back....iam still on lollipop
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
Works. Read my above post for my exact steps if needed.
Now working fast charging?
UpInTheAir said:
Can you please read a few of the previous replies. I will try to implement as many SkyHigh 5.1.1 features as possible. It's not going to happen in a day. Whether any fixes your "issues", who knows.
Click to expand...
Click to collapse
Dude, You Must Chill!
hope you re-support Korean SLK they got M today
complied from https://github.com/therootlord/android_kernel_motorola_msm8953
not my code, just sharing because i keep seeing people complain about magisk mods
Features:
-F2FS bug fixed (can flash magisk modules on stock)
-not sure what else
Flash in twrp
TODO:
-kexec-hardboot
-disable force-decrypt
Stock NPS26.116-45 kernel zip: Link
This was my first kernel compilation, let me know if something isn't working
Extreme-Plus-Kernel-nrdgd-1.zip compiled on nov-18-2017 Link: Google Drive
UPDATE, just found out wifi doesnt work, sorry, been traveling and didnt think to test. everything else seems to work tho.
heres an older version of the kernel not compiled by me until i figure this out
UPDATE 2 - wifi fixed
Extreme-Plus-Kernel-nrdgd-2.zip compiled on nov-19-2017 Link: Google Drive
It boots with aex 7.x - to early to say more
Phazmos said:
It boots with aex 7.x - to early to say more
Click to expand...
Click to collapse
wifi doesnt work for me, let me know if its working on yours and which model you have if you can
until then check OP for older version of the same kernel
wifi fixed
Ae3NerdGod said:
wifi doesnt work for me, let me know if its working on yours and which model you have if you can
until then check OP for older version of the same kernel
wifi fixed
Click to expand...
Click to collapse
Didn't notice it was broken - us version here.
It booted, but was very slow and laggy, even did a system cache wipe....Then restoring the default boot.img had wifi not working....Just FYI for those who want to try...Do a backup
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Would you mind sharing the build sequence/commands?
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
Just a note on kernels
I've tested many many kernels on many devices. When they are configured the same, performance/battery is about the same. Any difference was slight enough to be considered noise in the test methods. I always suggest to learn about kernel parameters then tweak it to the way you want. Any kernel will give more performance, or battery life, or anything between - all depends on how you configure it.
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Phazmos said:
Just a note on kernels
I've tested many many kernels on many devices. When they are configured the same, performance/battery is about the same. Any difference was slight enough to be considered noise in the test methods. I always suggest to learn about kernel parameters then tweak it to the way you want. Any kernel will give more performance, or battery life, or anything between - all depends on how you configure it.
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Click to expand...
Click to collapse
EXKM seems to work fine on AEX rom using the butterfly governor good battery life and smooth.
revengineer said:
Would you mind sharing the build sequence/commands?
Click to expand...
Click to collapse
i had to use his toolchain, and fix a few includes for it to work. im going to try different ones to try and figure out the lag, maybe thats not whats causing it but im new at this . been reading logs all day
smokinjoe2122 said:
It booted, but was very slow and laggy, even did a system cache wipe....Then restoring the default boot.img had wifi not working....Just FYI for those who want to try...Do a backup
Click to expand...
Click to collapse
yeah, sorry. new at this. dont know if @geneticengineer wants me passing his old kernels he hasnt posted around either. if you can find his afh, he has a really old one on there thats way faster. im still learning, im working on pulling the stock modules and kernel to make a back to stock zip rn actually will post soon if you keep using it, it speeds up a tiny bit lol
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
planning kexec hardboot and disable force decrypt when i get the hang of this.
Phazmos said:
Just a note on kernels
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Click to expand...
Click to collapse
actually i think i missed something in defconfig that enables the secondary processor, im also going to switch toolchains, expect a new kernel in a few days
Here's a link to GeneticEngineer's AFH-hosted original kernel from the TWRP thread. I don't think he'll mind it being reposted in this thread. This should tide people over until you can iron out the bugs in your build.
https://www.androidfilehost.com/?fid=745425885120765462
Thanks for picking up the baton and running with it, incidentally. I did ask GeneticEngineer to create a thread for his kernel but perhaps he missed the message.
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
i actually get those weird reboot to recovery bugs all the time on this device and 2 things fix it, booting to bootloader and picking "start" or a full restore
I tried version 2. I still couldn't get it to pass Magisk SafetyNet. I also noticed that this kernel breaks fingerprint gestures.
bishop0114 said:
I tried version 2. I still couldn't get it to pass Magisk SafetyNet. I also noticed that this kernel breaks fingerprint gestures.
Click to expand...
Click to collapse
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Loccy said:
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Click to expand...
Click to collapse
Thanks. I tried it and still wouldn't pass SafetyNet. The fingerprint gestures worked though. I am running it on a secondary ROM. Maybe that is causing the issue?
Loccy said:
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Click to expand...
Click to collapse
I've built a fully working stock kernel which has the needed commits for Magisk modules to work correctly and passes SafetyNet [emoji6]. Need to do some more updating (upstream) but I plan on posting it soon, probably new thread (Resurrected Kernel).
bishop0114 said:
Thanks. I tried it and still wouldn't pass SafetyNet. The fingerprint gestures worked though. I am running it on a secondary ROM. Maybe that is causing the issue?
Click to expand...
Click to collapse
A stock based kernel isn't gonna play well with custom ROMs, unless your secondary ROM is a stock ROM? I plan on creating one for cm-14.1+ based ROMs too.
Jleeblanch said:
I've built a fully working stock kernel which has the needed commits for Magisk modules to work correctly and passes SafetyNet [emoji6]. Need to do some more updating (upstream) but I plan on posting it soon, probably new thread (Resurrected Kernel). A stock based kernel isn't gonna play well with custom ROMs, unless your secondary ROM is a stock ROM? I plan on creating one for cm-14.1+ based ROMs too.
Click to expand...
Click to collapse
If you need someone to beta test it, let me know. It is the only reason I am not running stock.
First, I am not responsible to what happens after you flash this. If your phone dose not work afterwords it is your own doing. I didn't force you to flash it..
This is a stock rom for the most part for the Snapdragon Note 20 Ultra U1 that I use as my daily driver. I disabled file encryption, removed knox, fixed screen cast and shealth plus Bluetooth and smartwatch pairing. Most of the Google apps are uninstallable. I'll try to keep this up to date every month the best I can. Enjoy.
You Must Have A Unlocked Bootloader and a SM-N986 U1 or U Ultra to proceed.This Might Wipe Your Data!! Make a Back up!!.
Instructions:
1: Flash with Odin in the respective slots (bl, ap, cp and csc).
2: Wipe and format data in recovery if coming from a different rom or android version.
3: Reboot and set it up.
Enjoy.
See this thread or this thread if you need a unlock. The teams there are great!
Built With SuperR's Kitchen
Thanks @afaneh92 for the unlock and TWRP
Thanks @bklyn_syed for sharing the fixes for Bluetooth and shealth.
Removed ROM
Previous DUB5 ROM
Rick's ROM SM-N986U1 DUB5 February Patch. This is a safe update to One Ui 3.1.
Ricks_ROM_DUB5_2_Rom
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
======================================
Previous CUA1 ROM
File on MEGA
mega.nz
wow so fast, good work bro.
afaneh92 said:
wow so fast, good work bro.
Click to expand...
Click to collapse
Thanks I built it last night.
Anyone who downloaded this before this post please re-download the rom. I had a file mixed up with another rom by mistake, sorry. New files are uploading now. Please report any problems you may have if any, Thanks.
I uploaded some a new build that addresses the game launcher crash and theme store crash.
@Misterxtc Very glad to see more custom roms being built.
Would you be able to build an AOSP rom for the Note 20 Ultra (SM-986U)?
Would love to see an AOSP rom like Lineage OS or Havoc OS
Datboi459 said:
@Misterxtc Very glad to see more custom roms being built.
Would you be able to build an AOSP rom for the Note 20 Ultra (SM-986U)?
Would love to see an AOSP rom like Lineage OS or Havoc OS
Click to expand...
Click to collapse
Me too but I haven't gotten one to boot properly yet. I also own a S20+ and would like to build something for both. I am exploring the options.
Misterxtc said:
Me too but I haven't gotten one to boot properly yet. I also own a S20+ and would like to build something for both. I am exploring the options.
Click to expand...
Click to collapse
Great. Thank you
Any chance to have a version for the SnapDragon N9860?
OsiMood said:
Any chance to have a version for the SnapDragon N9860?
Click to expand...
Click to collapse
Sorry but no, I don't build for what I don't own.
Misterxtc said:
Sorry but no, I don't build for what I don't own.
Click to expand...
Click to collapse
Are the difference between those Snapdragon versions so substantial ?
OsiMood said:
Are the difference between those Snapdragon versions so substantial ?
Click to expand...
Click to collapse
I don't think so but I'm really not sure, I haven't looked into it. The big deal for me is downloading more firmware, keeping track of more files, storage space and time. Honestly it's pretty simple to build your own. You can get all the info you need for that here .
@Misterxtc, what is your preferred method for root access?
lyall29 said:
@Misterxtc, what is your preferred method for root access?
Click to expand...
Click to collapse
I use magisk canary from here in the download links and flash it in twrp.
Very exciting to see more Dev's like you making things better. Thank you.
iunlock said:
Very exciting to see more Dev's like you making things better. Thank you.
Click to expand...
Click to collapse
Thanks, I figured something like this would make it easier for those who like stock and are unlocked every month.
Misterxtc said:
Thanks, I figured something like this would make it easier for those who like stock and are unlocked every month.
Click to expand...
Click to collapse
I was sitting here debating on whether to go with 10 or 11 lol. Durrr me...I'm all for a custom cleaned up ROM any day over the untouched stock firmware. I see that your ROM is on the latest 11 (CUA1). Nice!
Since your tweaking the universal U1 firmware and since there isn't any carrier bloatware in there, is there much to really remove to make it even more lean and lighter? I know in the old days those firmware's were loaded with bloat and by removing them helped it a lot.
I also noticed that the latest 11 file size was smaller than the latest 10. From what you can see is that from just making 11 more efficient, thus making it lighter?
Regarding the change log:
Disabled File Encryption - Is that for the entire device file encryption or the built in folder encryption that was disabled? What are the benefits from disabling this? Does it just make it smoother even if you don't use the encryption feature on the device?
Removed Knox - Does using a smart watch to use Samsung Pay etc... still a work around even with the device knox removed?
Are there any settings to be able to tweak camera settings to improve the camera? iirc back in the Note 3 and 4 days, a Dev said that there was a value in the image quality or something that was set to I think 8 instead of the max 10? He had maxed that out and included that in the ROM... I'm curious if such adjustments exist in the 11?
Does the CUA1 have the baked in Microsoft Swiftkey (VIRUS) or is that only on carrier firmware's?
I have the Unlocked varaint of the Note 20 Ultra straight from Samsung. Oddly, it came with firmware ATGO, which is ATT lol.. but I'm on TM. What has been annoying is that I can't uninstall the darn microsoft swiftkey.
I love Swiftkey as a keyboard (best touch accuracy IMO), but despise the intrusivemness, so I like to use my own tweaked swiftkey with the internet premissions removed w/ using AFWall+ to block everything else. ie...
The thing is that I haven't been able to install the tweaked swiftkey due to it not letting me since the stock MS one is baked in...