1080p Screen Resolution - LG V10 Q&A, Help & Troubleshooting

Im new into LG, but I used to run this on my Note 4 all day, with no difference at all, it will bring a positive impact on battery life as the display will push nearly half of pixels, and to be honest, we wont notice the difference on daily basis, now the $1 million question...
Does anyone knows a successful way to change the screen resolution from QHD to FHD on the LG V10???
As always any help will be much appreciate :fingers-crossed:

yoniinfante said:
Im new into LG, but I used to run this on my Note 4 all day, with no difference at all, it will bring a positive impact on battery life as the display will push nearly half of pixels, and to be honest, we wont notice the difference on daily basis, now the $1 million question...
Does anyone knows a successful way to change the screen resolution from QHD to FHD on the LG V10???
As always any help will be much appreciate :fingers-crossed:
Click to expand...
Click to collapse
NOMone Resolution Changer worked on my LGG3. Tried to get to work on this phone but keeps acting up. Maybe someone else will have better luck.

blane73 said:
NOMone Resolution Changer worked on my LGG3. Tried to get to work on this phone but keeps acting up. Maybe someone else will have better luck.
Click to expand...
Click to collapse
Thank you, yeah i knew about this app, but nothing, it doesnt work, my guess is, it has to do something with the "second screen" which we already know is only one

adb shell wm size 1920x1080 doesn't work either, don't try it
Hopefully we'll get a fix soon!

ohmygaa said:
adb shell wm size 1920x1080 doesn't work either, don't try it
Hopefully we'll get a fix soon!
Click to expand...
Click to collapse
Thanks for the heads up i think it would be a lil harder on this device

2 years later, did someone find a working method

Related

Steps towards eventually fix CRT Anim distortion.

Slightly deceiving title? Hm, maybe.
But I just wanted to share some findings where people actually care.
You know the somewhat distorted look you get on the CRT effect when you lock the screen?
It doesn't appear if you:
• reboot phone and wait at PIN-Lock. If you lock the device then, you will get that perfect effect.
Same happens if you switch to Flight Mode, reboot phone.
You will have that perfect animation every time the screen turns off until you disable Flight Mode. After that you get the crappy animation.
So the question; why?
obviously it's connected to the SIM service. But how? And what's necessary to do to fix it?
I'm no dev, but I'm confident that there's some clever people here able to clear it out.
Another thing to consider is, that someone found out that if you change LCD Density you get a clean effect, even if it is from 240 to 240. But only until you go to the Power Menu.
Testraindrop said:
Another thing to consider is, that someone found out that if you change LCD Density you get a clean effect, even if it is from 240 to 240. But only until you go to the Power Menu.
Click to expand...
Click to collapse
Great thread mate, just thinking the same thing
i dont know why people care about CRT effect!
it's useless gimmick
i dont know why people care about other people who like useless gimmicks...
ragiut1 said:
i dont know why people care about CRT effect!
it's useless gimmick
Click to expand...
Click to collapse
It adds to the user experience.
didnt mean to annoy anyone, just curious
thnx OP
ragiut1 said:
didnt mean to annoy anyone, just curious
thnx OP
Click to expand...
Click to collapse
If you don't want to offend anyone, don't talk in absolutes, your not the only person in this community. I actually think Sammy should have included this stock:/ my mate has this working perfect, it's garbled on mine
Sent from my Synchronous Dual Core Galactic Korean Beastly Device

[Q] Can i change the screen sensitivity?

I'm coming from an iPhone and even though i love my new SGS2 the only negative i find is typing. I loved the iPhone keyboard and I'm trying to get a similar experience. So far I'm using Smart Keyboard pro with iPhone skin but even though it's pretty close i cant get the same feeling because the screen is not as sensitive. i have to press the space bar twice sometimes to register.
is there a way i can make the screen more sensitive?
Or if not is there another keyboard that will make my typing experience more similar to the iPhone one?
Thank you.
http://www.appbrain.com/app/iphone-keyboard-emulator-free/com.sixgreen.android.softkeyboard
jje
JJEgan said:
http://www.appbrain.com/app/iphone-keyboard-emulator-free/com.sixgreen.android.softkeyboard
jje
Click to expand...
Click to collapse
Very interesting but unfortunately it only supports English language. I also need Greek support.
thanks for the answer though.
Bump:-(
Sent from my GT-I9100 using Tapatalk
Can anyone tell me at least if its possible or point me to the right direction?
If you're genuinely having to hit keys twice sometimes just to get them to register then I'd actually question whether there's an issue with your handset because I've never heard of that happening before on this phone or any of the previous Android handsets I've used.
Medulla said:
If you're genuinely having to hit keys twice sometimes just to get them to register then I'd actually question whether there's an issue with your handset because I've never heard of that happening before on this phone or any of the previous Android handsets I've used.
Click to expand...
Click to collapse
There's nothing wrong with my handset. Just coming from an iPhone you hardly even have to touch the screen for the keystroke to register. If you had used an iPhone you would know what I'm talking about. Ive reed somewhere that the SGS2 has the same capabilities and that with the right settings it can register a keystroke from 1mm away from the screen. But i don't know where to find this settings.
No one can at least tell me if its possible or not so i can stop looking?
slekkas said:
No one can at least tell me if its possible or not so i can stop looking?
Click to expand...
Click to collapse
as far as im aware there is no way of adjusting the capacative sensitivity, IMO though (coming from iPhone 3GS, iPhone 4 and Desire HD) the SGS2 screen is just as good if not better. slightest touches register instantly and think its an amazing screen !
if your problem really is as you suggest, i think there is a problem with the capacative screen and may need to get it repaired

[Q] LCD Density

Hi,
Have just bought the Xperia S and is still under warranty, so don't want to tamper by unlocking the bootloader yet, not for a couple of months at least. Anyways I'm quite happy with the stock ROM, bloatware and all!!
However, the only thing I'm unhappy about, is the LCD density. I'm used to a value of 160 (on my old warhorse HTC HD2 with TyphooN_CM7_v3.7.0-MAGLDR - Android 2.3.7). Now, I know it's a silly question, but is there ANY way I can alter the LCD Density without rooting it??
Thanks,
JK
jiggyk said:
Hi,
Have just bought the Xperia S and is still under warranty, so don't want to tamper by unlocking the bootloader yet, not for a couple of months at least. Anyways I'm quite happy with the stock ROM, bloatware and all!!
However, the only thing I'm unhappy about, is the LCD density. I'm used to a value of 160 (on my old warhorse HTC HD2 with TyphooN_CM7_v3.7.0-MAGLDR - Android 2.3.7). Now, I know it's a silly question, but is there ANY way I can alter the LCD Density without rooting it??
Thanks,
JK
Click to expand...
Click to collapse
No.
Sent from my LT26i using XDA
Not even with root is it working I think
NO
If you want bigger text you could try this:
https://play.google.com/store/apps/details?id=com.a0soft.gphone.bfont
Some of my friends use it with great success.
Not with out root, but i messed about with that setting myself and changing it messes things up.
Things like the text/images on some menus dont fit right anymore or are off the bottom of the screen.
Its best to leave it as it is really
Seansmit17 said:
Not with out root, but i messed about with that setting myself and changing it messes things up.
Things like the text/images on some menus dont fit right anymore or are off the bottom of the screen.
Its best to leave it as it is really
Click to expand...
Click to collapse
What value are you trying it at? Try 220 or 160 (I'm not sure of this value on the XS - TREAD CAREFULLY). My HTC had some problems, including unavailability of Google Play downloads, but a value of 160 did the trick.
JK
Ambroos said:
If you want bigger text you could try this:
https://play.google.com/store/apps/details?id=com.a0soft.gphone.bfont
Some of my friends use it with great success.
Click to expand...
Click to collapse
Thanks, but I wanted some more screen real estate!
Default Density in buid.prop is 320 if i change it to 300 things are to small to fill the screen and if i go up to 330 things are to big to fit on the screen.
Seansmit17 said:
Default Density in buid.prop is 320 if i change it to 300 things are to small to fill the screen and if i go up to 330 things are to big to fit on the screen.
Click to expand...
Click to collapse
Try 310?
Sent from my LT26i using Tapatalk
ICS should offer the ability to change font size, which is probably preferable to changing the screen density - with the problems with how other things fit (or don't fit) the screen.
Does anyone use the BBC News widget/app? For some reason on all Xperia models, I only get one line of text on headlines. On other models, you get two. It's clearly a fault of the app, but suggests an issue with the font Sony (Ericsson) uses. Again, I hope that ICS might fix this with the Roboto font.
jonmorris said:
ICS should offer the ability to change font size, which is probably preferable to changing the screen density - with the problems with how other things fit (or don't fit) the screen.
Does anyone use the BBC News widget/app? For some reason on all Xperia models, I only get one line of text on headlines. On other models, you get two. It's clearly a fault of the app, but suggests an issue with the font Sony (Ericsson) uses. Again, I hope that ICS might fix this with the Roboto font.
Click to expand...
Click to collapse
Yes, I do too, incidentally. I had not noticed this until I read your post.
Seansmit17 said:
Not with out root, but i messed about with that setting myself and changing it messes things up.
Things like the text/images on some menus dont fit right anymore or are off the bottom of the screen.
Its best to leave it as it is really
Click to expand...
Click to collapse
I think I'll leave things as they are and wait for ICS. Could you please post some screenshots showing how it looks when you change the density? Just curious.
Thanks,
JK

[Q] Get root access Caesar H7500+

I have bought a Caesar (Hero) H7500+ with mdk6589, could anyone help me getting root access please?
Alex77roma said:
I have bought a Caesar (Hero) H7500+ with mdk6589, could anyone help me getting root access please?
Click to expand...
Click to collapse
We just received this phone as well and will be putting a full review up soon on youtube and the site. It appears the phone is either an OEM or copy (more likely) ZP800H / ZP810. Beyond looks and specs, it installs "ZP800H" drivers when plugged into a PC.
I will have a full video review up soon on the site today and attempt some auto root methods as well.
---------- Post added at 11:42 AM ---------- Previous post was at 10:49 AM ----------
Gizbeat said:
We just received this phone as well and will be putting a full review up soon on youtube and the site. It appears the phone is either an OEM or copy (more likely) ZP800H / ZP810. Beyond looks and specs, it installs "ZP800H" drivers when plugged into a PC.
I will have a full video review up soon on the site today and attempt some auto root methods as well.
Click to expand...
Click to collapse
Okay, the good news is the phone isn't bricked. Bad news is Bin4ry method certainly doesn't work. Tried both normal and special modes.
I bought this phone pre-rooted from MeriMobiles. If by the time i get it (2 weeks give or take) there is no root, i'll be happy to share a dump of the rom to help get it rooted
Caesar A9600
Just received this phone, wondering how I would go about rooting it? I have been told its a clone of the zp900H, however, mine is a quad core.
vault91 said:
Just received this phone, wondering how I would go about rooting it? I have been told its a clone of the zp900H, however, mine is a quad core.
Click to expand...
Click to collapse
It's the OEM version of the ZP810/ZP800H. There doesn't seem to be a root yet.
kuroyume_cl said:
It's the OEM version of the ZP810/ZP800H. There doesn't seem to be a root yet.
Click to expand...
Click to collapse
Actually no, when I connect USB it states zp900H. I also asked someone online and was told that It's a clone of the zp900/H9300+
vault91 said:
Actually no, when I connect USB it states zp900H. I also asked someone online and was told that It's a clone of the zp900/H9300+
Click to expand...
Click to collapse
Interesting. The ZP900H is the same as ZP910. What's the screen resolution in yours? if it is a ZP900H it should be QHD
http://www.zopo-mobile.net/zopo-zp9...u-1g-ram-4g-rom-3g-gps-smart-phone_p4338.html
Screen
Display Size 5.3 Inch
Type IPS screen, capacitive touch screen
Resolution 960 x 540 pixels
Screen Color 16000K Colors
vault91 said:
Screen
Display Size 5.3 Inch
Type IPS screen, capacitive touch screen
Resolution 960 x 540 pixels
Screen Color 16000K Colors
Click to expand...
Click to collapse
That means your phone is an A9600, not an H7500+
http://www.merimobiles.com/caesar-a...roid-4-1-2-dual-camera-1gb-ram_p/meri8002.htm
the H7500+ has a 720p screen.
http://www.merimobiles.com/oem-zopo...-4-1-1-hz-8-0mp-camera-1gb-ram_p/meri7376.htm
Yes, that is what I said I have in my original post, I mentioned the other ones because I'm told mine is pretty much a clone of them at least with regards to size and looks of the phone. It's not too common of a phone, I haven't seen much in the way of information on this phone, just thought it was a very decent phone ( better than my SG2 in most all areas)
My son suggested maybe seeing if I could find information on rooting it, hense my post and question here.
ahhhh, i always forget you can have titles on posts on this forum >_<
I think MT6890 phones are a bit too new, thus the lack of development so far. Should pick up at least enough to get root soon
Its okay. Unfortunately the screen got cracked tonight by accident Messaged the supplier but not sure what they can do for me. I only just got the phone a few days ago. Hopefully I can send it back to get a screen replacement. Thank you for your replies.
Hi, I bought this phone also (h7500+) and I'm very pleased with it, my only problem is the GPS is having a very hard time getting a lock, so I need to root it to modify gps.conf
Anyone find a way yet?
Spaceweed said:
Hi, I bought this phone also (h7500+) and I'm very pleased with it, my only problem is the GPS is having a very hard time getting a lock, so I need to root it to modify gps.conf
Anyone find a way yet?
Click to expand...
Click to collapse
Does your phone come with CWM or just with the stock recovery(3e)? If it has CWM installed, you can root it easily with a flashable zip file.
mke2fs said:
Does your phone come with CWM or just with the stock recovery(3e)? If it has CWM installed, you can root it easily with a flashable zip file.
Click to expand...
Click to collapse
Thanks for the reply. I just checked, and sadly it is the stock recovery (3e). I would try to flash CWM if there was a way, but I don't think there is without a bricking yet.
I also found there is a factory mode for this phone however (pwr + vol dwn) and it contains a plethora of options, problem is, it's all in chinese. I saw an option called GPS, it was followed by chinese characters, so I was too afraid to select anything.
i just rooted my phone H7500+
Spaceweed said:
Thanks for the reply. I just checked, and sadly it is the stock recovery (3e). I would try to flash CWM if there was a way, but I don't think there is without a bricking yet.
I also found there is a factory mode for this phone however (pwr + vol dwn) and it contains a plethora of options, problem is, it's all in chinese. I saw an option called GPS, it was followed by chinese characters, so I was too afraid to select anything.
Click to expand...
Click to collapse
i saw your request to root the phone erlier today, and i have just managed to root mine.
take a look on this link, it has a detiled guide on how to root the phone.
gizbeat[dot]com/2002/tutorial-how-to-root-mtk6589
have a nice day.
p.s. since im new to this forum, i cant post links to external sites, just remove the [dot] from the link and replace it with . and it should lead you to the website.
How did you manage to crack the screen? Is this a glass screen by the way?
I really like my H7500+, have it since March 19 and I really love the extremely great WiFi coverage. The GPS works with mine, takes about 2 to 3 minutes to get a sat lock. I tried Sygic today, just on my way home (walking) and the signal from the satellites seem to be strong enough.
great phone, a bit heavy, true, yet still a great phone.
StardustOne said:
How did you manage to crack the screen? Is this a glass screen by the way?
I really like my H7500+, have it since March 19 and I really love the extremely great WiFi coverage. The GPS works with mine, takes about 2 to 3 minutes to get a sat lock. I tried Sygic today, just on my way home (walking) and the signal from the satellites seem to be strong enough.
great phone, a bit heavy, true, yet still a great phone.
Click to expand...
Click to collapse
I think because H7500+ it neither gorilla or ogs so you gotta be really careful. It's just a normal glass. you gotta be very gentle with it and put on a case
i found this:
gizbeat.com/2002/tutorial-how-to-root-mtk6589
if this helps anyone?...
Is it possibe to get the files from other source ? The link does not really work for me,...
Thank you for help.
Best regards

Strange issue. Can anyone help? It's urgent please.

I'm having the dreaded touch lag issue on my poco device.
I've sent it back for repair or refund but they refuse to do anything since the touch tests pass.
I tried explaining them my previous 3 years old device is fine and that the poco which is much newer and faster should do this and they don't listen to me, they say that the device is working like the manufacturer intended for it to work.
So, can anyone record a video?
It should only take 2-3 minutes to record and upload. Do it in 480p it doesn't matter as long as it shows the issue.
There are 2 ways to do it, the correct way, and the fast way, I'll write both.
1) Go to about phone, kernel version, tap a few times then CIT testing app will open. (if it doesn't open try again)
Then go to the top right and press the three dot menu, then additional tools, then touch sensor.
Then tap really fast on the edges of the display. If your device is working as intended the touches should all be registered.
2) Download realdrum, and tap really fast on the below drums on the edge of the display, If your device is working as intended the drums should register all the inputs without missing.
Again it's urgent, so I could use all the help I can.
Thank you.
Did you tried your device without a case? I read about cases doing this issued.
darkgizmo said:
Did you tried your device without a case? I read about cases doing this issued.
Click to expand...
Click to collapse
Yes I have.
No change.
Is your device working correctly?
Could you upload a video?
Here's an example video of what the problem looks like.
Ignore that the language is not english, the video was recorded for the shop to see.
https://1drv.ms/v/s!Alh2bAGk6Iy4hQ5-Dc6Tu3UgRQzi
I feel for you. All the 7 pocophone I have tried have this annoying issue. I've complained and asked people about it, and who claims that theirs is working fine is either using Swiftkeyboard (which isn't as fast as Gboard), or simply doesn't know how to test this properly. Maybe they just don't notice it at all, but I doubt there's a single pocophone without this bug, and this is what made me give up on the phone.
v.redd.it/z0ph2ff4eys11
Here's what you probably need.
rylark said:
I feel for you. All the 7 pocophone I have tried have this annoying issue. I've complained and asked people about it, and who claims that theirs is working fine is either using Swiftkeyboard (which isn't as fast as Gboard), or simply doesn't know how to test this properly. Maybe they just don't notice it at all, but I doubt there's a single pocophone without this bug, and this is what made me give up on the phone.
v.redd.it/z0ph2ff4eys11
Here's what you probably need.
Click to expand...
Click to collapse
Jesus christ 7 pocophones?
Wow.
God damn it Xiaomi, how can they release a faulty device and take no responsibility for it?
Samsung went ahead and recalled all the Note 7s that had the battery issue, a much more expensive and higher selling device.
nfsmw_gr said:
Jesus christ 7 pocophones?
Wow.
God damn it Xiaomi, how can they release a faulty device and take no responsibility for it?
Samsung went ahead and recalled all the Note 7s that had the battery issue, a much more expensive and higher selling device.
Click to expand...
Click to collapse
2 returned from a retail store, 2 from amazon, 1 that I tried from a store and 2 more from friends of mine. It's absurd how bad their quality control is. They claim that it's software, just like they claimed the screen bleeding was part of the phone. They're a ****ing joke.
Do you have a screen protector on , or to be more specific, a tempered glass one with the black band? If so this is your issue because the black band is slight raising the contact. Have you tried pressing the device harder to see it it registers?
betterthanjordan79 said:
Do you have a screen protector on , or to be more specific, a tempered glass one with the black band? If so this is your issue because the black band is slight raising the contact. Have you tried pressing the device harder to see it it registers?
Click to expand...
Click to collapse
No screen protector, pressing harder doesn't affected the usage.
Most of the units if not all have this problem, I canceled my order for this phone recently and I'm glad that I did. Xiaomi had to save on something and they did, sadly on the screen. Screens from tianma are known for their not very good quality ( rumors say that they catch afterimages after time ) and it feels bad that it turned out that this phone is a big no no. Screen is a numero uno thing when it comes to a phone, damn u look and type on it so despite the great specification this phone is a crap. People all over miui forum write threads that their pocophones have input lag and ghost touches. Xiaomi knows about it and since a month clam that they gonna fix it via ota updates. Let me tell you something they won't. It's not possible to fix it because it's a faulty digitizer that causes the problem which is obviously a part of the hardware. That's what happens when you try to rock the world with the best spec budget smartphone and u cut costs in the lcd panel area. With all that being said, don't fall for this phone. If you look for the good phone for 300 bucks then better option imo is for example Lg g6. Don't get fooled and stay open minded guys, peace.
exdeee said:
Most of the units if not all have this problem, I canceled my order for this phone recently and I'm glad that I did. Xiaomi had to save on something and they did, sadly on the screen. Screens from tianma are known for their not very good quality ( rumors say that they catch afterimages after time ) and it feels bad that it turned out that this phone is a big no no. Screen is a numero uno thing when it comes to a phone, damn u look and type on it so despite the great specification this phone is a crap. People all over miui forum write threads that their pocophones have input lag and ghost touches. Xiaomi knows about it and since a month clam that they gonna fix it via ota updates. Tell me tell you something they won't. It's not possible to fix it because it's a faulty digitizer that causes the problem which is obviously a part of the hardware. That's what happens when you try to rock the world with the best spec budget smartphone and u cut costs in the lcd panel area. With all that being said, don't fall for this phone. If you look for the good phone for 300 bucks then better option imo is for example Lg g6. Don't get fooled and stay open minded guys, peace.
Click to expand...
Click to collapse
I completely and totally 100% agree with you.
Just waiting right now to get my refund.
I'll most likely get the OP6/T.
I dont have this issue. - using MIUI10 8.10.11
nfsmw_gr said:
I completely and totally 100% agree with you.
Just waiting right now to get my refund.
I'll most likely get the OP6/T.
Click to expand...
Click to collapse
Good decision, refund this crappy phone and get something better. When it comes to me xiaomi just lost a supporter and follower, once Hugo Barra left xiaomi everything started to fall apart ( mi mix 2/2s are not as revolutionary as the first mi mix was or the mi 8 which is nothing else than a iphone x copy ). It's always good to wait and see the very first 3 months after a phone release, usually after this time most of the fails/cons come out. Have a good day anyways
exdeee said:
Most of the units if not all have this problem, I canceled my order for this phone recently and I'm glad that I did. Xiaomi had to save on something and they did, sadly on the screen. Screens from tianma are known for their not very good quality ( rumors say that they catch afterimages after time ) and it feels bad that it turned out that this phone is a big no no. Screen is a numero uno thing when it comes to a phone, damn u look and type on it so despite the great specification this phone is a crap. People all over miui forum write threads that their pocophones have input lag and ghost touches. Xiaomi knows about it and since a month clam that they gonna fix it via ota updates. Let me tell you something they won't. It's not possible to fix it because it's a faulty digitizer that causes the problem which is obviously a part of the hardware. That's what happens when you try to rock the world with the best spec budget smartphone and u cut costs in the lcd panel area. With all that being said, don't fall for this phone. If you look for the good phone for 300 bucks then better option imo is for example Lg g6. Don't get fooled and stay open minded guys, peace.
Click to expand...
Click to collapse
Just tried using CIT as well as really drums. Problem has been solved in latest beta 8.10.18
U can try and confirm. Scrolling on the edges is also smooth now and even keyboard is working fine.
exdeee said:
Good decision, refund this crappy phone and get something better. When it comes to me xiaomi just lost a supporter and follower, once Hugo Barra left xiaomi everything started to fall apart ( mi mix 2/2s are not as revolutionary as the first mi mix was or the mi 8 which is nothing else than a iphone x copy ). It's always good to wait and see the very first 3 months after a phone release, usually after this time most of the fails/cons come out. Have a good day anyways
Click to expand...
Click to collapse
Again you are right.
I became impatient with my old phone and that got the better of me.
Will keep those words at mind next time.
Have a good day as well pal.
sanjay0501 said:
Just tried using CIT as well as really drums. Problem has been solved in latest beta 8.10.18
U can try and confirm. Scrolling on the edges is also smooth now and even keyboard is working fine.
Click to expand...
Click to collapse
Well, it doesn't change the fact that lcd panels in pocophones are poor quality. I don't really believe that they managed to fix it via updates, only time will tell after let's say a month if the problem is fixed. I don't think that it will, it's better to send the phone back, get ur money and wait. There are way better options for example the aforementioned one plus 6.
Working fine for me
For me it is working fine. I can't see the blue line which show the position but the touch is working fine even when I tap it fast. The touch is always registered without the blue lines. You can always see a red dot where you touched.
exdeee said:
Well, it doesn't change the fact that lcd panels in pocophones are poor quality. I don't really believe that they managed to fix it via updates, only time will tell after let's say a month if the problem is fixed. I don't think that it will, it's better to send the phone back, get ur money and wait. There are way better options for example the aforementioned one plus 6.
Click to expand...
Click to collapse
If u own the phone try stable 9.6.25 ( I haven't tried) or beta 8.10.18 ( I have tried with all types of tests) and then comment
sanjay0501 said:
If u own the phone try stable 9.6.25 ( I haven't tried) or beta 8.10.18 ( I have tried with all types of tests) and then comment
Click to expand...
Click to collapse
And you try to understand smart boy that input lag is related to a hardware problem not a software problem, go and check by the way miui forums. There are plenty of people commenting that 9.6.25 didn't fix a thing.
exdeee said:
Well, it doesn't change the fact that lcd panels in pocophones are poor quality. I don't really believe that they managed to fix it via updates, only time will tell after let's say a month if the problem is fixed. I don't think that it will, it's better to send the phone back, get ur money and wait. There are way better options for example the aforementioned one plus 6.
Click to expand...
Click to collapse
Fyi op6 screen has high latency as well

Categories

Resources