Hi,
A thread has been created and was deleted.. so, as I tried it out, here are the steps..
Disclaimer : I m not responsible and report what has been working for my case which was as well leading to no data lost, no wipe so far.
Note : Having an alternate recovery (TWRP instead of 3e) would avoid a successfull any future phone update done through the menu. Updates will then have to be pushed with SP_Flash_Tool
Thanks : doogeemobile.com / original xda thread by gramolitero
What could be needed : -> Same tools and steps as the Doogee X5, except the Scatted for MT6735 and recovery.img files.
SP_Flash_Tools and Doogee X5 procedure
TWRP Recovery file, in English
+ Attached Scatter for Mediatek MT6735
- Optional- Doogee X5Pro Rom
Steps :
- Download/Unpack FlashTools, run Flash_tool.exe as an Administrator
- Select "Download Agent" and input MKT_AllInOne_DA.bin
- Select "scatter-Loading" and search MT6735_Android_scatter.txt
- Select "Download Only"
- Uncheck all boxes
- Checkmark and change the path of recovery file to be replaced.
- Make sure the connection is made through USB in the options (See screenshot)
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles in a new window is then displayed.. -> OK
- Finish !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once this recovery has been done.
- Boot the phone with Power and Vol+ simultaneously.
- Select "Recovery" with VolUp key, validate with VolDown key.
- Plug the phone to the PC, and drop the BETA-SuperSu.v220 on the SD Card
- Install SuperSU then reboot.
The phone is now rooted.. place to Xposed, or any apps through the TWRP recovery.
Regards
Pierrick
hi,
can you please post all files here because i can't download it from that link you posted here ( 01-Android_CDC_Driver.zip, 02-SP Flash Tool+Scatter File.rar, 03-TWRP Recovery for DoogeeX5.rar )
thx
found all files, but when i try instaling su i got error in recovery, my phone have R08 rom and idk if that is problem?
i rooted my phone, only i was using older version super su 2.46 i think, and i changed name to update, after that phone was rooted
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
lucaviend said:
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
Click to expand...
Click to collapse
i have 09 but didn't root again, i don't see any difference from 08
i just tried r09 today...yes i can felt the different from r08
i hope someone can make a cusom rom for this phone
Thanks a lot
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
nanotech17 said:
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
Click to expand...
Click to collapse
yup the root process is still same as before...
i'v flash L speed and bravia 4
Sooo, im from Canada and it won't work over here cause the Band Frequencies are not selected. I can see the right one I need to select, but they are blacked out. Will rooting the phone unlock those bands so I can choose the right frequency for Canada?
Love the phone, just whish I could use it here
rooting will not change phone's band freq
why is no custom rom for this phone. . .so sad -_-
Hold your horses boys. It's a new phone so it will take some time until there is a custom ROM.
Hopefully someone will port the CyanogenMod to this nice mobile.
Something else, has anyone tried the OTG functions? Can it read a thumb drive properly? I hope it has V4L2 drivers when I receive mine.
Does the twrp recovery actually work. I've flashed it to my phone and it doesn't work. Has anybody got any other links. Also the website where the recovery file is linked is blocked by windows
Worked perfectly, thank you!
If this helps anyone, I had issues getting the drivers installed, I followed this thread here; http://forum.xda-developers.com/showthread.php?t=2180436
It kept appearing and disappearing in Device manager, just click it as soon as it appear and then install the drivers. If it disappears it does not matter at that point
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
lucaviend said:
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Click to expand...
Click to collapse
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
linolino said:
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
Click to expand...
Click to collapse
u can check here...doogee x5pro russian forum
http://4pda.ru/forum/index.php?showtopic=699029
use gTrans
reisrm said:
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
Click to expand...
Click to collapse
what zip? cm12.1?
it's there via mega but i dont if it work for x5pro because it's originally for oukitel k6000 (same processor)
Most of the files are missing/Links broken at doogeemobile.com/blog/doogee-x5-phone-root-guide.
Related
I tested on LG G2 Korea Version F320S, F320L, F320K
- Why bootloop?: Some people Update OTA after flash CWM or TWRP so it will be bootloop. Or some strange reasons
- What should we do when we can not flash Stock firmware by FlashTool.1.0.54?
Let do follow this guide:
- Download file:
Flashtool V1.5 --> http://www.fshare.vn/file/TNVQZ9N74T ( tks to GSM Hosting forum )
Crack Flashtool : http://www.fshare.vn/file/TS1SGGVYWT ( tks to GSM hosting Forum )
File .TOT firmware :
F320S ->>> http://www.fshare.vn/file/T3SZR52W6T
F320K ->>> http://www.fshare.vn/file/TZRVMVMPFT
F320L V11c -->>> http://www.fshare.vn/file/TVR9DPAC7T
.dll file F320S/L/K >----- http://www.fshare.vn/file/TKW8J7QPQT
Driver: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
- Let do:
Step1: Install Flashtool V1.5. Default install folder C:\LG\LGFlashtool
Copy crack file Megalock.dll to C:\LG\LgFlashtool
Step2: Enter download mode: Turnoff, push vol+ and plug USB cable in
Open Device Manager on your computer and choose COM41 for phone connection:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step3: Open Flashtool, choose .dll and .tot file, then fresh yellow icon like this:
Step4: When Flashtool show Realdy, push USB out for 5secs and plug in again. Flash tool will automatic run
Step5: Wait for finishing:
Read more: http://choimobile.vn/threads/huong-dan-cuu-soft-brick-lg-g2-f320s-l-k.12932/#ixzz2h8Fy9fJB
Suggest you read the rules for XDA no warez allowed, CRACKED SOFTWARE = WAREZ!
fma965 said:
Suggest you read the rules for XDA no warez allowed, CRACKED SOFTWARE = WAREZ!
Click to expand...
Click to collapse
This is extremely useful, please blackout offending list and leave the post alone.
JoeTF said:
This is extremely useful, please blackout offending list and leave the post alone.
Click to expand...
Click to collapse
As a RC i can't do that.
Even though it is cracked, we don't see it as "warez". Almost every device has it cracked, so noone would be able to use it if we wouldn't allow it.
I mean, we also "crack" the bootloader of devices, which would be considered as warez, too, in that case
Cheers
laufersteppenwolf said:
Even though it is cracked, we don't see it as "warez". Almost every device has it cracked, so noone would be able to use it if we wouldn't allow it.
I mean, we also "crack" the bootloader of devices, which would be considered as warez, too, in that case
Cheers
Click to expand...
Click to collapse
hmm i guess, the way it was worded seems like you were cracking software tbh. my bad
fma965 said:
hmm i guess, the way it was worded seems like you were cracking software tbh. my bad
Click to expand...
Click to collapse
oops, may be a bit unluckily worded... the first "we" was meant as the mod staff, and the 2nd "we" as xda in general
laufersteppenwolf said:
oops, may be a bit unluckily worded... the first "we" was meant as the mod staff, and the 2nd "we" as xda in general
Click to expand...
Click to collapse
sorry, yeah i meant the OP not your reply
fma965 said:
sorry, yeah i meant the OP not your reply
Click to expand...
Click to collapse
Good post. Please leave this post coz I am also the lucky guy can get repair my bricked G2 using this usefuly TOT recovery method.
If possible, remind to set back correct version number (F320 L / K / S) in build info. which match with your IMEI#.
dokyson said:
I tested on LG G2 Korea Version F320S, F320L, F320K
- Why bootloop?: Some people Update OTA after flash CWM or TWRP so it will be bootloop. Or some strange reasons
- What should we do when we can not flash Stock firmware by FlashTool.1.0.54?
Let do follow this guide:
- Download file:
Flashtool V1.5 --> http://www.fshare.vn/file/TNVQZ9N74T ( tks to GSM Hosting forum )
Crack Flashtool : http://www.fshare.vn/file/TS1SGGVYWT ( tks to GSM hosting Forum )
File .TOT firmware :
F320S ->>> http://www.fshare.vn/file/T3SZR52W6T
F320K ->>> http://www.fshare.vn/file/TZRVMVMPFT
F320L V11c -->>> http://www.fshare.vn/file/TVR9DPAC7T
.dll file F320S/L/K >----- http://www.fshare.vn/file/TKW8J7QPQT
Driver: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
- Let do:
Step1: Install Flashtool V1.5. Default install folder C:\LG\LGFlashtool
Copy crack file Megalock.dll to C:\LG\LgFlashtool
Step2: Enter download mode: Turnoff, push vol+ and plug USB cable in
Open Device Manager on your computer and choose COM41 for phone connection:
Read more: http://choimobile.vn/threads/huong-dan-cuu-soft-brick-lg-g2-f320s-l-k.12932/#ixzz2h8Fy9fJB
Click to expand...
Click to collapse
can't eneter in download mode i am stuck!!! help!!!
can someone give me the files for my D80210a
Stuck
Every time I try to press vol.up and plug in I still load right into twrp
ocarlty said:
Every time I try to press vol.up and plug in I still load right into twrp
Click to expand...
Click to collapse
I have the same problem with the CWM.
when i press the yellow arrow it gives me this error
i press ok and it continues to the step i have to reconnect the phone.
i reconnect it and i get this
i have changed the com number
i don't know what is the problem...
taxexpert said:
I have the same problem with the CWM.
Click to expand...
Click to collapse
Me too. Ever get this figured out?
I think what this boils down to is USB debugging was disabled by the factory reset. I had reset my device to prepare to sell it. When it booted back up I got an OTA offer and, not thinking, I accepted it. However, I still had CWR and root. I think OTA'S require stock recovery to work properly. So, no USB debugging and CWR as the recovery = soft brick. And, since CWR does not have a terminal option, there's no way to enter commands. I'm thinking this is going to be a warranty claim for me.
Will it work to restore a D805?
dokyson said:
I tested on LG G2 Korea Version F320S, F320L, F320K
- Why bootloop?: Some people Update OTA after flash CWM or TWRP so it will be bootloop. Or some strange reasons
- What should we do when we can not flash Stock firmware by FlashTool.1.0.54?
...
Click to expand...
Click to collapse
Hi!
Thank you for this n.n
Will it work to restore a D805? If not, then I better be careful with OTAs, or I better don't use any recovery as I'm not going to
flash any custom ROM till the G2 is done with official updates (2015?).
Thanks again n.n
- L.
I get this problem any help would be appreciated. thanks.
Could someone give another link on file for F320S > LGF320SAT-00-V10e-SKT-KR-JUL-29-20130
Becuse I have tried to download it by link in the topic. It takes me more than 8 hour, but file was corrupted (2.3 GB not 2.5 GB).
Please - I need TOT for F320
Sorry, if I interrupt here. I'm very new to forum.
My LG G2 F320S having Boot Loop after i updated on 4th Jan 2014.
I try to get TOT file for - 320S ->>> Given location But it seems not working. (I meant not downloading. I tried several days).
If anybody having it please please share with me.
Thanks Lot.
LK
Weird issue
Hi All,
tried using flashtool but I get the error that I need to check my phone model or the DLL.
I bought this phone from the Philippines with model number LG D802. I had flashed other roms for this with D802.
But when I was trying a while ago since I got a bootloop issue, the phone's downlaod mode is in korean and says in the phone and flashtool that my phone is running F320K? but it's so weird since I had D802 before even in the IMEI sticker in the back and to think I installed rayglobe ROM, before having the boot loop.
Any help would be appreciated.
THanks!
Hello,
Custom Recovery + Root
Wolfpapa said:
this is new: Nubia z9 全球首发中文TWRP recovery 以及root工具 时
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://bbs.nubia.cn/thread-501293-1-1.html
Download: http://pan.baidu.com/s/1ntoX6AX
Click to expand...
Click to collapse
Google Play
Wolfpapa said:
Works! Thanks!
BASIS: http://bbs.nubia.cn/thread-487610-1-1.html
1: ROOT :
http://bbs.nubia.cn/forum.php?mod=viewthread&tid=480787&extra=page=1&filter=typeid&typeid=379
2: Step by step BASIS
3: manually installed pack of gapps called : system\priv-app folder with rwxr-xr-x permissions.
4: Reboot
5: run Play Store (After it sets long to start: new reboot)
6: enjoy! ALL WORKS! (also contacts)
Click to expand...
Click to collapse
Custom ROM from Cuoco92
Cuoco92 said:
Here the 1.38
https://mega.nz/#!O4pHVZgB!Q4bqcygWox9GAZWfhiWviUX34OGnwXPfK7fXq5-RLd4
I've posted it on my Facebook site
https://m.facebook.com/cuoco92
Inviato dal mio NX505J utilizzando Tapatalk
Click to expand...
Click to collapse
Let me know what works for you. Just got mine today and have tried root genius and kingroot..no luck
Akuji52 said:
Hello,
i want to root the ZTE Nubia Z9 but nothing works. I tried Rootgenius, Kingoroot ...
Can someone help ?
Thank you
Click to expand...
Click to collapse
it worked today!
http://bbs.nubia.cn/thread-481008-1-1.html
Download:
http://pan.baidu.com/s/1c0k3O9E Password: mk24
Google apps:
http://www.coolapk.com/apk/org.coolapk.gmsinstaller?from=rss&version=1.0.0-beta4
UPDATE!
http://forum.xda-developers.com/showpost.php?p=61779046&postcount=86
Hi Wolfpapa,
thank you for your info.
I downloaded the files you write.
But now i can not read the chines letters. How did you make it, with the .exe file.
Can you please write it in english or german.
Thank you!
Grisu122122 said:
Hi Wolfpapa,
thank you for your info.
I downloaded the files you write.
But now i can not read the chines letters. How did you make it, with the .exe file.
Can you please write it in english or german.
Click to expand...
Click to collapse
the same as in (can it also work ...) :
http://forum.xda-developers.com/and...-nubia-z9-mini-one-click-root-custom-t3130631
Original " Z9和Z9MAX 是一个ROOT工具 " version:
It may be the exception to the non-English speaking TWRP VERSION...
Here is the solution to English translation:
http://forum.xda-developers.com/showthread.php?t=2373952
Unfortunately, I can test the next week. The phone will be next week delivery
please write about your experiences phone! Google apps ?
Thanks!
New FOTA UPDATE About SD!
Back up your data before moving to a new rom !
http://www.nubia.cn/service.php?sid=5
Download: Password : tira
http://pan.baidu.com/share/link?shareid=3545574096&uk=2436317143 (Jdownloader )
Update PDF manual:
http://pan.baidu.com/s/1c0wGeMc
first Steps!!!: UNROOT !!!
step Two: reading PDF :laugh:
i killed my stock recovery so i cant go to the recovery to update. It shows only a black screen.
Is there a way to flash the stock recovery or a custom recovery ?
I have root.
Thanks
Akuji52 said:
i killed my stock recovery so i cant go to the recovery to update. It shows only a black screen.
Is there a way to flash the stock recovery or a custom recovery ?
I have root.
Thanks
Click to expand...
Click to collapse
post #6 !!! - or.. :
1; download rom post #6
2; Unpacking with WinRAR or 7zip the stock recovery.img
3; fastboot mode ( enable USB Debugging mode )
4; Flashing recovery.img via adb
ok thanks, i will try it , when i am back from holiday
Wolfpapa said:
post #6 !!! - or.. :
1; download rom post #6
2; Unpacking with WinRAR or 7zip the stock recovery.img
3; fastboot mode ( enable USB Debugging mode )
4; Flashing recovery.img via adb
Click to expand...
Click to collapse
don't try this!!!!
i have flash the recovery.img file and now the phone doesn't start!!
i cant only start on boot to choise recovery or normal boot but don't work in all two options!!!
HELP ME!
NMarco said:
don't try this!!!!
i have flash the recovery.img file and now the phone doesn't start!!
i cant only start on boot to choise recovery or normal boot but don't work in all two options!!!
HELP ME!
Click to expand...
Click to collapse
How this happened?It describes the process?
why, how? etc.
I have used recovery.img into the upgrade file.
Flashed via adb and now the phone is hold on boot logo screen.
If I power on pressing vol - button I see screen to choose to boot in recovery or reboot system or power off.
All options doesn't work!
Do you have any ideas?
wow!!! Solved!
- I waited until the battery of my nubia z9 was completely to 0% .
- pressed vol down and connected to usb cable + charger (not pc!)
- wait 10 minutes for charge a little battery
- connect phone to pc and extracted recovery.img of the file zip upgrade
- via adb I have run this command: fastboot -i 0x19d2 flash recovery recovery.img
- selected reboot to recovery
- ALL OK! fortunately!!!
NMarco said:
wow!!! Solved!
- I waited until the battery of my nubia z9 was completely to 0% .
- pressed vol down and connected to usb cable + charger (not pc!)
- wait 10 minutes for charge a little battery
- connect phone to pc and extracted recovery.img of the file zip upgrade
- via adb I have run this command: fastboot -i 0x19d2 flash recovery recovery.img
- selected reboot to recovery
- ALL OK! fortunately!!!
Click to expand...
Click to collapse
cleverly solved! :good::good::good:
any ideas to install gapps without custom recovery?
ok! in this post I reply to me!!
I have manually installed pack of gapps called: gapps-lp-20141109-signed on system\priv-app folder with rwxr-xr-x permissions.
That's all!
All works but actually only contacts aren't not sync and I dont's see in sync page of my account.
How did you actually do it?? It's not clear to me, are you rooted? Otherwise how could you access "system\priv-app" folder?
Thanks...
Yes, device is rooted!
NMarco said:
Yes, device is rooted!
Click to expand...
Click to collapse
And can I ask the exact steps you took?
Thanks again...
---------- Post added at 09:45 PM ---------- Previous post was at 09:28 PM ----------
giacomofisico said:
And can I ask the exact steps you took?
Thanks again...
Click to expand...
Click to collapse
Getting specific, is it the boot.img that you find in the big .zip file that you have to boot up?
Something like:
adb reboot bootloader
fastboot -i 0x19d2 boot boot.img
...and then flash superSU (and possibly gapps)?
Hi All.
Got my device from Hong kong today, Live in Denmark so think i am the first user in Denmark of this device.
Man the screen are great
We are missing an forum for this device here on XDA, hope they create one for us soon, so we can setup guides on how to do this and that.
Ok could we create an process guide in this thread with links for updating, rooting and so on.
I really miss Google stuff on my device, Google Play, sync from google contacts, photos, calender and so on.
First i think i need to Root right?
When its done i need to install Google framework right?
Could soneone that has allready provide us with links, guides or mayby Youtube video on how to do it correct, i would kill myself if i Break the device on the first day.
Thanks peeps
This is the stock Rom of N & M for Yoga Book LTE & WIFI for the needers
if any dev want to help me developing a dual boot for Yoga Book, just PM me or join Telegram Group for Yoga Book devs and users:
MOD EDIT: LINK REMOVED
Prees the Thanks button if that helps you
How to install it:
Be careful, these steps will erase all your data on tablet and will downgrade rom (stock marshmallow)
First of all: read and understand all of the instructions.
1. Download the stock ROM
https://cloud.kolyandex.su/index.php/s/4WDt6ghOzHAyP4s (Nougat WiFi version)
https://easy-firmware.com/home/browse/category/id/19521/ (Marshmallo LTE version)
https://androidfilehost.com/?fid=817550096634799507 (Marshmallo WiFi version)
2. Extract it to some folder
3. Download Intel Platform Tool Lite from here: https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
4. Install Intel Platform Tool Lite
4. Boot into fastboot mode
5. Run Intel Platform Tool Lite
6. Make sure your tablet is recognized by the tool (otherwise you need to enable USB-debug in Developer settings)
7. Select "flash_update_from_eng.json" from folder in (2)
8. Push "start to flash"
9. Wait... (You should check tablet's screen in order to lock/unlock bootloader (it should be locked after flash in order to install OTA updates))
10. Reboot tablet
11. Your keyboard might not work: that is normal (just use on-screen keyboard for now)
12. After initial setup: open Contacts app, create new one (if there are no contacts yet), tap search and enter ####6020#
13. Choose your region
14. Reboot
15. Setup again (now halo should work)
16. Go into settings -> about -> updates and update till the last version (may take several hours)
17. Say thanks for alexjustes for his Amazing Steps
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
beltani said:
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
Click to expand...
Click to collapse
Unfort. no, because i dont have a YB Android Version, i have win ver.
THE MAXIMUM POWER said:
Unfort. no, because i dont have a YB Android Version, i have win ver.
Click to expand...
Click to collapse
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
beltani said:
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
Click to expand...
Click to collapse
Same, it can only flashed through fastboot mode
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
@MarkAllen, thank you for your valuable information. This will help people unbrick their devices.
MarkAllen said:
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
Click to expand...
Click to collapse
Thank You for the INFOS
The tool does not recognized my device
Please help to flash my yoga book.
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
jeitana said:
Please help to flash my yoga book.
Click to expand...
Click to collapse
Try installing Android SDK drivers in you PC
Guys, if anyone faced a Probleme during his way to flash the ROM, PLZ tell me the problems with More Details
_Deeb0_ said:
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
Click to expand...
Click to collapse
Is this compatible with the Yoga Book A12?
I have been away for a while. Why should I want to install this rom?
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Shawnki91 said:
Is this compatible with the Yoga Book A12?
Click to expand...
Click to collapse
Sorry but no
hajkan said:
I have been away for a while. Why should I want to install this rom?
Click to expand...
Click to collapse
No Need to reinstall this Rom if you have already your System, both are 100 % same
hajkan said:
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Click to expand...
Click to collapse
Reinstall the Rom will fix this, but doing factory reset will fix this too
In case anyone wants the wifi only M firmware here it is https://androidfilehost.com/?fid=817550096634799507
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes:
These are built with kernels from the latest Beelink GT-King (Amlogic S922X w/ w400 reference board) and Beelink GT1mini (Amlogic S905X2 w/ u212 reference board) firmware, but will probably work on any device based on the same reference boards.
The signed .ZIP files are suitable for installation with stock OEM recovery, but they use platform test keys and so might not work on builds requiring release keys.
If your device uses Android Verified Boot, there are additional measures you must take to successfully boot with a custom recovery partition.
Some OEM firmware have a stock recovery auto-restoration "feature" that will immediately replace TWRP after you reboot to system. The easiest workaround is simply to reboot to recovery immediately after the flash by holding the reset button. You can also try renaming /system/recovery-from-boot.p.
This is unofficial and unsupported, so the usual caveats apply. Since we don't flash the bootloader, you should be able recover from any problems...but nothing is guaranteed.
Not working:
MTP & ADB
Downloads:
S922X (Amlogic w400 reference board):
twrp-9.0-w400-3.7.0-0.img
twrp-9.0-w400-3.7.0-0-signed.zip
S905X2 & S905X3 (Amlogic u212 reference board):
twrp-9.0-u212-3.7.0-0.img
twrp-9.0-u212-3.7.0-0-signed.zip
Change Log:
v3.7.0-0: (20221204)
Updated to TWRP 3.7.0 release built from OMNI branch.
Updated to 007P0 LPDDR4 (u212) and 921P0 (w400) kernels.
v3.3.1-0: (20191111)
Switched from KM9 to GT1mini kernel
v3.2.3-0: (20190929)
Initial release
Instructions:
From OEM update app:
Copy .ZIP file to flash drive or microSD card
Open the UPDATE app and select Local Update
Select the .ZIP file and confirm
Note: No need to wipe data or cache
From OEM stock firmware (with root):
Open terminal window (e.g. Terminal Emulator for Android by Jack Palevich)
Navigate to location of .IMG file
Type the following:
Code:
su
dd if=twrp.img of=/dev/block/recovery
reboot recovery
From existing TWRP install:
Copy .IMG file to flash drive or microSD card
Click Install->Select Storage and pick the external drive
Click Install Image and select the .IMG file
Select Recovery partition and swipe to install
Reboot to Recovery
Source:
android_device_amlogic
Donations:
Your support is always appreciated! Just click here.
Hi!
I put your recovery using the UPDATE app method and I am unable to boot to it using "adb reboot recovery". Got a black screen
knuxxx said:
I put your recovery using the UPDATE app method and I am unable to boot to it using "adb reboot recovery". Got a black screen
Click to expand...
Click to collapse
Sounds like your box is using AVB 2.0.
Can someone please assist with how to root the U211 devices? TWRP works great, SuperSu 2.82 installs successfully via TWRP but when the system boots, it's still not rooted.
Any help is greatly appreciated here
Hey I'm stuck on bootloop, any hElp please? Gtking (S922X)
Vee89 said:
Hey I'm stuck on bootloop, any hElp please? Gtking (S922X)
Click to expand...
Click to collapse
Do you perhaps have the DDR4 (S/N: B922X) version of the GT-King? This one was build for the LPDDR4 (S/N:922X) hardware revision.
Magendanz said:
Do you perhaps have the DDR4 (S/N: B922X) version of the GT-King? This one was build for the LPDDR4 (S/N:922X) hardware revision.
Click to expand...
Click to collapse
I have : S/N:922XHQHE00129
Do you know a way to boot in recovery?
Vee89 said:
I have : S/N:922XHQHE00129
Click to expand...
Click to collapse
That *should* work then.
Vee89 said:
Do you know a way to boot in recovery?
Click to expand...
Click to collapse
Just hold the reset switch in for about 20 seconds while connecting power.
Fastboot mode is more of a challenge on the GT-King, since it can't get enough power from the USB cable by itself. You've got to hold the reset switch while simultaneously connecting both power and the USB cable to the back port.
Magendanz said:
That *should* work then.
Just hold the reset switch in for about 20 seconds while connecting power.
Fastboot mode is more of a challenge on the GT-King, since it can't get enough power from the USB cable by itself. You've got to hold the reset switch while simultaneously connecting both power and the USB cable to the back port.
Click to expand...
Click to collapse
Ok thank you, I tryed recovery mode.. still stuck in bootloop, I ordered a usb cable from gearbest so I will try fastboot wen mail knocks
Thank You TWRP work well
Magisk installation
And what to do to install Magisk correctly. The root is already on the Android 9 device. Unfortunately, the Magisk installation by TWRP has failed so far. Have any ideas? (applies to device and Amlogic S905X2 HK1 Play)
Can this be used on the Ugoos AM6 pro 4 gb / 32 gb s922x?
I guess so?
Duvel999 said:
Can this be used on the Ugoos AM6 pro 4 gb / 32 gb s922x?
Click to expand...
Click to collapse
My understanding is that Ugoos doesn't use the platform keys, and so the .zip file won't work with the OEM stock recovery. You should be able to flash the .img file, though, from TWRP or dd with root. (Yes, I know that's a bit of a chicken-or-egg scenario, so you might need to use Amlogic's USB Burning Tool or update.exe.) Also, look to see if they've implemented AVB 2.0, which can also be a PITA to work around.
Hi
I've got my eyes on a Beelink GT king Pro. Does this work with a s922x-h board @Magendanz ?
MAMATDZ said:
I've got my eyes on a Beelink GT king Pro. Does this work with a s922x-h board @Magendanz ?
Click to expand...
Click to collapse
I'd be surprised if it didn't. It's based on the same reference board as the GT King.
Ok great !
Thanks for the quick answer ^^
have someone a way to put TWRP on Amlogic S905X3?
Hi.
Can this be used on the S905X3? (Wechip v9 4GB/32GB)
Hello. When I try "Apply update from EXT", I got:
Code:
Found: Amlogic/p281:8.10/OPM1.171019.011/root:userdebug/test-keys
E3003: This update package is intended only for Android Pie builds (SDK 28)
Does it mean I cannot install it in Oreo Android?
romkeris said:
Hello. When I try "Apply update from EXT", I got:
Code:
Found: Amlogic/p281:8.10/OPM1.171019.011/root:userdebug/test-keys
E3003: This update package is intended only for Android Pie builds (SDK 28)
Does it mean I cannot install it in Oreo Android?
Click to expand...
Click to collapse
Yes that is what it means, I think his REF to TWRP-9.0 pretty much explains its for android 9 aka Pie only.
But there are many other recoverys that do work for Oreo...
xXx NoLimits ☆ Magisk TWRP Installer- SM-N986B Exynos ☆
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
☆ Magisk TWRP Installer ☆
This is originaly a Magisk TWRP Installer made by xXx for OnePlus 8 Pro.
I just took and modified it to get it work on our Samsung Galaxy Note 20 5G Ultra.
Our Dr.Ketan helped me to fix the TWRP Installer with the path of the recovery partiton.
1. Before using this Installer you must need following!!!!...... else it wont work:
- Root your device like Dr.Ketan mentioned in his Root thread!!! --> [Guide] How to root N20 Ultra (N986B)(N9860)
2. How you can use this TWRP Installer?
- Download the Magisk TWRP Installer from post 2
- Just open Magisk -> Go to Modules -> Press Install from storage -> Choose the TWRP Installer -> Flash and press Reboot
Congratulation now you flashed TWRP made by ianmacd
3. How to update the Magisk TWRP Installer?
-Download the latest TWRP from Ian and swap only the .img file inside the .zip and repeat point 2.
Credits
@xXx ; @Dr.Ketan ; @ianmacd
Source from TWRP made by Ian:
https://github.com/ianmacd/twrp_c2s
Telegram Group:
Be my guest at Samsung Galaxy Note 20 / 20 Ultra
☆ Downloads ☆
Android 11
TWRP_3_5_0_10-A11_6_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_5_0_10-A11_1_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
Android 10
TWRP_3_4_0_1a23_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a20_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a19_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a18_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a16_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
reserved..........
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/galaxy-note-20-ultra/development/recovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
nawaf2816 said:
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/ga...ecovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
Click to expand...
Click to collapse
Exactly for that purpose it is made my friend ?
Let us know the result
xenix96 said:
Exactly for that purpose it is made my friend
Let us know the result
Click to expand...
Click to collapse
I have successfully installed it and installation was very quick & smooth! :good:
I will keep monitoring for any issue may arises , hopefully non ..
Thank you dude, Good work !
Good job :good:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
nawaf2816 said:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Click to expand...
Click to collapse
Vitalik666teen said:
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
Click to expand...
Click to collapse
I hope our devs can manage to solve the issues in the twrps.
For flashing roms, kernel, magisk, twrp etc it is working at the moment
can i install this TWRP on device N981B
tnx
usitaly said:
can i install this TWRP on device N981B
tnx
Click to expand...
Click to collapse
This recovery is only for N986B.
Sorry mate
Oh what the hell.
I tried that on my one plus 8 pro when I had it.
Can you do snapdragon as well?
When will the system recovery partition be supported. In TWRP ??
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
What is the way to flash I use the old version
Is mtp fixed in this version?
songoku1 said:
Is mtp fixed in this version?
Click to expand...
Click to collapse
Good question.
I didnt test it cause i use the sd card which is working great.
Let us know if you want test and have a result ?
xenix96 said:
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
Click to expand...
Click to collapse
Where can I find this telegram channel?
Uploaded new ianmcd a19 TWRP in post #2
Just flashed over Magisk without a issue :good::good::good::good::good:
Changelog:
Samsung TWRP unofficial build announcements
(Ian Macdonald)
The following alpha 19 releases for devices launched with Android 10 have, in addition to the latest round of TWRP fixes, a couple of new features:
* When using the file manager, it is now possible to open a terminal in the currently selected folder. This currently works only on devices with TWRP in portrait orientation.
* logd now runs in recovery, so adb logcat will now work when the device is booted to TWRP.