xXx NoLimits ☆ Magisk TWRP Installer- SM-N986B Exynos ☆
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
☆ Magisk TWRP Installer ☆
This is originaly a Magisk TWRP Installer made by xXx for OnePlus 8 Pro.
I just took and modified it to get it work on our Samsung Galaxy Note 20 5G Ultra.
Our Dr.Ketan helped me to fix the TWRP Installer with the path of the recovery partiton.
1. Before using this Installer you must need following!!!!...... else it wont work:
- Root your device like Dr.Ketan mentioned in his Root thread!!! --> [Guide] How to root N20 Ultra (N986B)(N9860)
2. How you can use this TWRP Installer?
- Download the Magisk TWRP Installer from post 2
- Just open Magisk -> Go to Modules -> Press Install from storage -> Choose the TWRP Installer -> Flash and press Reboot
Congratulation now you flashed TWRP made by ianmacd
3. How to update the Magisk TWRP Installer?
-Download the latest TWRP from Ian and swap only the .img file inside the .zip and repeat point 2.
Credits
@xXx ; @Dr.Ketan ; @ianmacd
Source from TWRP made by Ian:
https://github.com/ianmacd/twrp_c2s
Telegram Group:
Be my guest at Samsung Galaxy Note 20 / 20 Ultra
☆ Downloads ☆
Android 11
TWRP_3_5_0_10-A11_6_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_5_0_10-A11_1_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
Android 10
TWRP_3_4_0_1a23_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a20_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a19_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a18_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a16_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
reserved..........
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/galaxy-note-20-ultra/development/recovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
nawaf2816 said:
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/ga...ecovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
Click to expand...
Click to collapse
Exactly for that purpose it is made my friend ?
Let us know the result
xenix96 said:
Exactly for that purpose it is made my friend
Let us know the result
Click to expand...
Click to collapse
I have successfully installed it and installation was very quick & smooth! :good:
I will keep monitoring for any issue may arises , hopefully non ..
Thank you dude, Good work !
Good job :good:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
nawaf2816 said:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Click to expand...
Click to collapse
Vitalik666teen said:
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
Click to expand...
Click to collapse
I hope our devs can manage to solve the issues in the twrps.
For flashing roms, kernel, magisk, twrp etc it is working at the moment
can i install this TWRP on device N981B
tnx
usitaly said:
can i install this TWRP on device N981B
tnx
Click to expand...
Click to collapse
This recovery is only for N986B.
Sorry mate
Oh what the hell.
I tried that on my one plus 8 pro when I had it.
Can you do snapdragon as well?
When will the system recovery partition be supported. In TWRP ??
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
What is the way to flash I use the old version
Is mtp fixed in this version?
songoku1 said:
Is mtp fixed in this version?
Click to expand...
Click to collapse
Good question.
I didnt test it cause i use the sd card which is working great.
Let us know if you want test and have a result ?
xenix96 said:
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
Click to expand...
Click to collapse
Where can I find this telegram channel?
Uploaded new ianmcd a19 TWRP in post #2
Just flashed over Magisk without a issue :good::good::good::good::good:
Changelog:
Samsung TWRP unofficial build announcements
(Ian Macdonald)
The following alpha 19 releases for devices launched with Android 10 have, in addition to the latest round of TWRP fixes, a couple of new features:
* When using the file manager, it is now possible to open a terminal in the currently selected folder. This currently works only on devices with TWRP in portrait orientation.
* logd now runs in recovery, so adb logcat will now work when the device is booted to TWRP.
Related
It includes DRM patch and disabled force encryption.
Because fstab.qcom has been moved to system since 8.0, I cannot modify the boot image.
Some of you guys might have a problem with TWRP encryption password. With stock kernel, /data will be encrypted in a few boots even if you set no password.
About this kernel:
- Working camera (DRM-patch)
- Disabled dm-verity (so we can use magisk)
- Can mount /data in recovery (it means we can install magisk inside /data)
- Pass both safetynet
- You can still encrypt any time
- It will not decrypt your data. In other words, you have to do factory reset (wipe data) if it's already encrypted.
- See encryption status in Setting->Security
You can download from the attachments.
41.3.A.2.24
G8231 - View attachment xzs-p3-2.24.zip Based on Nordic Combined
G8232 Dual - View attachment xzsd-p3-2.24.zip Based on Customized TH
41.3.A.0.401
G8231 - Download from a thread by @Pandemic
G8232 Dual - View attachment xzsdp3.0.401-unzip.zip Based on Customized VN (for fingerprint)
Also, patch View attachment drmfix.zip before first system boot.
41.2.A.7.76
G8231 - View attachment xzs-p2.7.76.img.zip
G8232 Dual - View attachment xzsd-p2.7.76.img.zip
41.2.A.7.65
G8231 - View attachment xzs-p2.7.65-extract-first.zip
G8232 Dual - View attachment xzsd-p2.7.65-extract-first.zip
41.2.A.7.53
G8231 - View attachment 8231-boot753noencrypt.zip
G8232 Dual - View attachment boot-7.53-noforceencrypt.zip
It's not flashable zip, so please extract before use.
It will bootloop if you flash wrong version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to disable by yourself? - Not for Oreo
Prerequisite:
- 32-bit linux (you can use it on liveboot drive or VM)
It doesn't work on cygwin (windows) because of its native executable. So use linux 32 bit (i386), or 64 bit (amd64) with multiarch.
- Unpack using mkbootimg tool made by xiaolu (I tried kitchen and it won't work)
- Open fstab.qcom
- Replace "forceencrypet" with "encryptable"
- Pack again
- Done!
Thanks tobias.waldvogel and xiaolu for their awesome tools.
If you have any question, feel free to ask me or some nice guys here.
zlRampageSlz said:
Some of you guys might have a problem with TWRP encryption password. With stock kernel, /data will be encrypted in a few boots even if you set no password.
About this kernel:
- Working camera (DRM-patch)
- Disabled dm-verity (so we can use magisk)
- Can mount /data in recovery (it means we can install magisk inside /data)
- Pass both safetynet
- You can still encrypt any time
You can download from attachment.
View attachment 4246515
It's not flashable zip, so please extract it before use.
View attachment 4246527
How to disable by yourself?
Prerequisite:
- 32-bit linux (you can use it on liveboot drive or VM)
It doesn't work on cygwin (windows) because of its native executable. So use linux 32 bit (i386), or 64 bit (amd64) with multiarch.
- Unpack using mkbootimg tool made by xiaolu (I tried kitchen and it won't work)
- Open fstab.qcom
- Replace "forceencrypet" with "encryptable"
- Pack again
- Done!
Thanks tobias.waldvogel and xiaolu for their awesome tools.
If you have any question, feel free to ask me or some nice guys here.
Click to expand...
Click to collapse
i'd just like to ask a question.. are we gonna be able to have the tap2wake feature back? or it's just not possible...
Thank you! Can you recover?
谢谢！超逼真可以恢复吗？
In what order to I flash recovery, root and the kernel? (I've never used a kernel before)
Great, but you can just flash twrp-3.0.2-0-kagura.img instead of a newer version and it will work perfectly. For some reason the newer twrps for xz will ask for password to decrypt data
And can you make this for g231?
tapperyaus said:
In what order to I flash recovery, root and the kernel? (I've never used a kernel before)
Click to expand...
Click to collapse
You have to unlock bootloader first before you can flash anything. Then just "fastboot flash boot <thatkernel>.img" in fastboot (blue LED). Recovery and root is optional. Normally, you have to use TWRP recovery to flash zip (su installer).
So, unlock bootloader -> flash kernel -> flash recovery -> install su in TWRP
Also, you can read detailed my tutorial here.
HellFish23 said:
Great, but you can just flash twrp-3.0.2-0-kagura.img instead of a newer version and it will work perfectly. For some reason the newer twrps for xz will ask for password to decrypt data
And can you make this for g231?
Click to expand...
Click to collapse
When you use 3.0.2-0, does it work while being encrypted? Or you have to do a factory reset to prevent further encryption.
Sure, I'll make for you guys when I'm free.
I've added G8231 kernel in the attachments.
zlRampageSlz said:
When you use 3.0.2-0, does it work while being encrypted? Or you have to do a factory reset to prevent further encryption.
Sure, I'll make for you guys when I'm free.
Click to expand...
Click to collapse
I understood the issue was twrp saying is encrypted while you didn't encrypt it yourself, may have misunderstood but I didn't test it while I actually encrypt it myself. And thanks!
Everything is working fine for the kernel, I no longer get the green photos and I can download Super Mario Run (my go to Safetynet app), but when I try to boot into recovery to flash Magisk all I get is a black screen. I tried flashing another TWRP version and still get a black screen. I'm on the dual sim variant.
Even if this problem can't be fixed, thanks for the kernel!
tapperyaus said:
Everything is working fine for the kernel, I no longer get the green photos and I can download Super Mario Run (my go to Safetynet app), but when I try to boot into recovery to flash Magisk all I get is a black screen. I tried flashing another TWRP version and still get a black screen. I'm on the dual sim variant.
Even if this problem can't be fixed, thanks for the kernel!
Click to expand...
Click to collapse
Could you give me TWRP log while installing magisk? Try using uninstaller and wiping cache first. Then flash stock kernel before install magisk again.
zlRampageSlz said:
Could you give me TWRP log while installing magisk? Try using uninstaller and wiping cache first. Then flash stock kernel before install magisk again.
Click to expand...
Click to collapse
The problem wasn't installing magisk, it was that TWRP wasn't installing correctly. Attempting to reach TWRP leads to a black screen. It's easily avoidable by booting the twrp.img through adb/fastboot (then flashing magisk there), I just can't install TWRP onto the phone.
tapperyaus said:
The problem wasn't installing magisk, it was that TWRP wasn't installing correctly. Attempting to reach TWRP leads to a black screen. It's easily avoidable by booting the twrp.img through adb/fastboot (then flashing magisk there), I just can't install TWRP onto the phone.
Click to expand...
Click to collapse
Sorry I misunderstood your question, TWRP right now cannot boot in the normal way (from fastboot/adb, or even TWRP itself). You have to hold power+vol down at the same time.
zlRampageSlz said:
Sorry I misunderstood your question, TWRP right now cannot boot in the normal way (from fastboot/adb, or even TWRP itself). You have to hold power+vol down at the same time.
Click to expand...
Click to collapse
Why can't i enter the TWRP by hold power+vol down at the same time? The screen just turned between black and logo.
Thanks.
I found the problem is that i forgot to flash recovery
Hi, Does this kernel support DoubleTap2Wake?
Ok
AWESOMEE..
Xenroe said:
Hi, Does this kernel support DoubleTap2Wake?
Click to expand...
Click to collapse
Not yet, I'll look around if I have some time.
zlRampageSlz said:
Not yet, I'll look around if I have some time.
Click to expand...
Click to collapse
Thanks, i would've flashed XZ Kernel just so i can have DoubleTap2Wake if i could.. I'll be looking forward to your update...
This kernel is good, but I have a question: When I brush the kernel, I can't enter TWRP through the combination of the volume key and the power button. Instead, my phone switch between the logo and the black screen. Do I need to write a TWRP again?(My English is not good, please fogive me:crying
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or your getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications
* If you point the finger at me for messing your device. i will laugh at you
Special Notes:*
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.*
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work.
If you like my work please hit the "Thanks" button and feel free to donate to me via my Paypal
Guide
1.Make sure u have rooted device.
If Not follow this (Root For U3,S3,S4)
2. Download the custom recovery[TWRP]
3. On the PC rename the unpatched recovery as recovery.img*
4. Use 7zip to make it into recovery.tar*
(right click and choose add to archive)
5. Use 7zip to add your patched boot.img to recovery.tar
(right click and choose add to archive and choose recovery.tar)
6. Use 7zip to add vbmeta.img to recovery.tar
(right click and choose add to archive and choose recovery.tar)
7. Install recovery.tar to ap slot using Odin.
To ensure that data is not encrypted*so as to enable data to be backed up follow these steps
8. Boot the A20 into TWRP and mount everything that you can.
9. Format Data (not just wipe)
10. Flash*Disable_Dm-Verity.
11. Reboot into Recovery. It will reboot into download mode.
12. On the pc repeat step 7.
13. Reboot phone and re-enter all data.
14. Reboot into Recovery.
15. Flash Magisk
16. Backup*boot, data & system
17. You can now restore boot, data & system.
If u are getting vbmeta.img fotter error when booting to twrp Then flash this vbmeta.tar via odin ap solt.
Downloads
Twrp [U3][U4][S3][S4]
Build with A205FXXS4ASJ4 Source.
Thanks:
TWRP team
@topjohnwu for root
@ianmacd for TWRP flash guide
@afaneh92 for device tree
- @fahadali2315 Good friend, Always support me
Contributors
@Agrim720
Version Information
Status:*Stable
Current Stable Version:*1.0
Stable Release Date:*2019-12-02
Created*2019-12-02
Last Updated*2019-12-17
Quick Root and TWRP.
A quick method is found here.https://forum.xda-developers.com/galaxy-a20/how-to/guide-quick-root-twrp-galaxy-a20-t4069423
Make sure you backup boot, data & system (not system image) before you go on to install GSIs
This TWRP was originally designed for Android 9 but works perfectly with Android 10.
It also comes with MTP built-in.
physwizz said:
Your title says A10. Is that a typo?
This is for the A20 yes?
Click to expand...
Click to collapse
Yes.
Wrong typed.
Fully updated thread with easy guide.
Agrim720 said:
Yes.
Wrong typed.
Click to expand...
Click to collapse
Fixed.
Magic???
Looking forward to seeing more A20 people with TWRP who can backup and restore. ?
physwizz said:
Fixed.
Magic???
Click to expand...
Click to collapse
What Magic?
i didt understand.
Agrim720 said:
What Magic?
i didt understand.
Click to expand...
Click to collapse
The title has been changed from A10 to A20.
What about U4?
TBM 13 said:
What about U4?
Click to expand...
Click to collapse
I'll wait for U8
I can see you mention me then you changed your mind.
afaneh92 said:
I can see you mention me then you changed your mind.
Click to expand...
Click to collapse
Yeah didt put device tree link thats why i remove.
i tryped soon in sources ill put link today and mention you Then ppl will know why thanks goes to u.
TBM 13 said:
What about U4?
Click to expand...
Click to collapse
i dont think it is even released.
Please help. I can't backup data with this recovery
thatha said:
Please help. I can't backup data with this recovery
Click to expand...
Click to collapse
Format data and flash dm-virety.
Agrim720 said:
i dont think it is even released.
Click to expand...
Click to collapse
Take a look to the attached image.
TBM 13 said:
Take a look to the attached image.
Click to expand...
Click to collapse
Twrp will work.
Bcz its built from December security patch sw source.
U can try and report for U4.
Agrim720 said:
Twrp will work.
Bcz its built from December security patch sw source.
U can try and report for U4.
Click to expand...
Click to collapse
Im on U4 and it's confirmed that TWRP is working and installing custom kernel as well.
Deluriane said:
Im on U4 and it's confirmed that TWRP is working and installing custom kernel as well.
Click to expand...
Click to collapse
can you backup and restore
physwizz said:
can you backup and restore
Click to expand...
Click to collapse
Haven't tried yet, but I will in a bit. Kept on getting boot loop when installing custom kernel.
Note: Tried already! Backup and restore works.
Deluriane said:
Haven't tried yet, but I will in a bit. Kept on getting boot loop when installing custom kernel.
Note: Tried already! Backup and restore also working on my end.
Click to expand...
Click to collapse
Maybe the custom kernel that you are installing is more older and doesn't works with U4
TBM 13 said:
Maybe the custom kernel that you are installing is more older and doesn't works with U4
Click to expand...
Click to collapse
Yeah, probably. Tried it also when I was on OCT and it didn't boot also. Have to wait for a newer version.
Utimate Q Rom
lots of under the hood tweaks great battery based off stock very debloated same as A20 A30 and A40 now Ultimate Q for A50
Rom Download https://drive.google.com/file/d/1Lx22Z2mzpQmTxQidCMin1846w84Gsg6D/view?usp=sharing
Rom with kernel stock debloated with Magisk https://androidfilehost.com/?fid=4349826312261799780
kernel source https://github.com/prashantpaddune/android_kernel_samsung_a50dd
kernel credits @prashantp01
no Magisk added to rom
flash an enjoy
Telegram https://t.me/ultimate_Pie2
No screens or change log?
also the download no work;
"OOPS!
no mirrors found."
InFam0us-1985 said:
No screens or change log?
also the download no work;
"OOPS!
no mirrors found."
Click to expand...
Click to collapse
check again its working or come to telegram
link has been fixed
Thanks for the new ROM. Will definitely try it and report back. But, I think a features list, bugs (if any) should be posted to op. I went to the telegram group and can't seem to find the rom features for a50.
L3R0N said:
Thanks for the new ROM. Will definitely try it and report back. But, I think a features list, bugs (if any) should be posted to op. I went to the telegram group and can't seem to find the rom features for a50.
Click to expand...
Click to collapse
a20 a30 a40 all have the same rom iam doing a series phone in telegram if you look at photos there is tons and yes ill get a list here eventually
I can't get passed extracting Vendor. What is going on here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It works for me https://youtu.be/OnALLXFpXGg
install instruction: enter TWRP, format data, reboot to Power off, enter TWRP and install the ROM then Reboot to System ( boot system without magisk ), after Setup the phone, you can boot system with magisk ( Reboot to Recovery )
This works really well. The installation took a bit longer than usual but everything went smoothly (all you need is some patience to let it do its thing). Bootup speed was the usual. I would've loved if Bixby stuff was removed. Also I thought this was a bare minimum install but I got things I don't need or want or use. Items such as Root Explorer, Es file explorer, blue mail, niagara launcher. And they can only be disabled. Maybe remove them from the main build and have them as a flashable addon in the future? Air Command keeps crashing for me so it doesn't work. I don't need it anyway. Overal an awesome rom. Performance is also great. Would this work with Quantum Kernel?
Edit:
Bluetooth devices need to be paired after every reboot. Not sure if this is an issue with everyone or just me. Gotta pair my Galaxy Buds and Galaxy Watch every time I reboot. Also, Samsung Account keeps asking me to login again in order to use Samsung Services securely.
After reboot in root (recovery) mode, device hangs at lock screen and crashes.
shumway66 said:
Utimate Q Rom
Rom Download https://drive.google.com/file/d/1Lx22Z2mzpQmTxQidCMin1846w84Gsg6D/view?usp=sharing
Rom with kernel stock debloated with Magisk https://androidfilehost.com/?fid=4349826312261799780
Click to expand...
Click to collapse
There is no Magisk on the second ROM ( androidfilehost ), but Magisk is included on the First ROM ( google driver ). I think you need add descriptions about these ROMs please... like what different ROM 1 and ROM 2.. Thanks
---------- Post added at 05:50 AM ---------- Previous post was at 05:48 AM ----------
EonOfBlack said:
After reboot in root (recovery) mode, device hangs at lock screen and crashes.
Click to expand...
Click to collapse
First boot, don't reboot to Recovery but Reboot to System, after complete setup the phone then you can Reboot to Recovery ( boot system with magisk )
L3R0N said:
This works really well. The installation took a bit longer than usual but everything went smoothly (all you need is some patience to let it do its thing). Bootup speed was the usual. I would've loved if Bixby stuff was removed. Also I thought this was a bare minimum install but I got things I don't need or want or use. Items such as Root Explorer, Es file explorer, blue mail, niagara launcher. And they can only be disabled. Maybe remove them from the main build and have them as a flashable addon in the future? Air Command keeps crashing for me so it doesn't work. I don't need it anyway. Overal an awesome rom. Performance is also great. Would this work with Quantum Kernel?
Edit:
Bluetooth devices need to be paired after every reboot. Not sure if this is an issue with everyone or just me. Gotta pair my Galaxy Buds and Galaxy Watch every time I reboot. Also, Samsung Account keeps asking me to login again in order to use Samsung Services securely.
Click to expand...
Click to collapse
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
How do you go about this? Flash the rom and then the GSI kernal? or does it not matter?
Just tried to install lineage os 17 but had no joy.
InFam0us-1985 said:
How do you go about this? Flash the rom and then the GSI kernal? or does it not matter?
Just tried to install lineage os 17 but had no joy.
Click to expand...
Click to collapse
This is still oneui so I think you need to use the oneui kernel with it. Flash rom, then kernel.
---------- Post added at 08:49 AM ---------- Previous post was at 08:48 AM ----------
immortalized2018 said:
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
I'll give it another try and see if it is fixed. Or maybe I'll do a clean rom myself. Been a while since I got my hands dirty ?
immortalized2018 said:
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
I got the same problems with Bluetooth after I rooted the magisk module mentioned here works very well. I never had to re pair my Bluetooth devices again.
usb debugging ..not working
Just flash Ultimate R tomorrow night the smooth rom workig very well no any bug i found
mehmetuman said:
usb debugging ..not working
Click to expand...
Click to collapse
Working in ultimate R
Work A505GT Android 11 downgrade to Android 10..
You have Ultimate Pie to A505GT?
Can you uninstall the system app without the cell dying ??? and .... Can you bring android pie for binary 7 please
THIS ISNT MY WORK I AM ONLY SHARING THIS !
Hello everyone,
I am sharing today this twrp i found recently on 4pda forum (i know people are lazy to go and check that forum especially that u need to create an account there to download files and solve a russian captcha to continue so u need some russian knowledge)
Note : i've been using this twrp since his first releases and there was no problem at all
Features :
I've seen a lot of users suffering from DFE and encryption and other issues, this twrp got additional features that u can use without having to flash different zips everytime (as u can see in the screenshots)
-Different font and splash screen
-Black/white/blue default theme
-Partition SD card (our device doesn't have an sd card slot so it's pretty useless)
-Fix contexts
-Rm AVB-verity & force encrypt (for encryption issue and rom not booting after flash)
-Root / Unroot (magisk)
-Delete fingerprints and pins if u accidently forget them
-Fix avb (vbmeta)
-GooglePay fix
-Support the backup of additional partitions
LINKS :
3.4.0-1
Img to flash in twrp (recovery partition) : https://anonfiles.com/R7T4K0Gao6/twrp-3.4.0-1-davinci_by_brigudav_img
Pc/fastboot method : https://anonfiles.com/DcX3K8Gco2/twrp-3.4.0-1-davinci_by_brigudav_zip
Click to expand...
Click to collapse
3.4.0-2 :
Img to flash in twrp (recovery partition) : https://anonfiles.com/XfF3cbK5oc/twrp-3.4.0-2-davinci_img
Pc/fastboot method : https://anonfiles.com/JfO2c1Kbo9/twrp-3.4.0-2-davinci_rar
Click to expand...
Click to collapse
Ps : if there is new updates in the future i will post them here
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Source of the thread : https://4pda.ru/forum/index.php?showtopic=960347&st=15460#entry98211570
Dev's profile : https://4pda.ru/forum/index.php?showuser=2683454
ㅤㅤ
The first thing I did was install a true dark theme with the existing official twrp so cool to see it implemented at default here.
Actually the official one does all I need so will no try this one.
Also not confident in installing a Russian recovery without sources... ?
mchtt said:
The first thing I did was install a true dark theme with the existing official twrp so cool to see it implemented at default here.
Actually the official one does all I need so will no try this one.
Also not confident in installing a Russian recovery without sources...
Click to expand...
Click to collapse
Take it or leave it mate the guy just wanted to help, and some options there seems pretty useful in critical times so
Thank you so much for sharing!
Getflat said:
i know people are lazy to go and check that forum especially that u need to create an account there to download files and solve a russian captcha to continue so u need some russian knowledge
Click to expand...
Click to collapse
So very true. I tried many times to download from there but failed due to Russian thingy
Getflat said:
I've seen a lot of users suffering from DFE and encryption and other issues, this twrp got additional features that u can use without having to flash different zips everytime (as u can see in the screenshots)
Click to expand...
Click to collapse
This feature is very useful as there are many custom ROMs to test for our device with regular updates. Formatting the Data and copying the files every time for each ROM flash is a pain.
Im using twrp 3.1.1 version, and running MIUI 12 Stable,
If i flash twrp 3.4 i dont loose any files or broke system?
Sorry for my english
J-Johnny said:
Im using twrp 3.1.1 version, and running MIUI 12 Stable,
If i flash twrp 3.4 i dont loose any files or broke system?
Sorry for my english
Click to expand...
Click to collapse
No flashing twrp is safe
Getflat;83090455% said:
I am sharing today this twrp i found recently on 4pda forum...
Note : i've been using this twrp since his first releases and there was no problem at all
LINKS :
Img to flash in twrp : https://anonfiles.com/R7T4K0Gao6/twrp-3.4.0-1-davinci_by_brigudav_img
Click to expand...
Click to collapse
Thanks, interesting
Just flashed - I like that it offers more partitions to choose for Flashing IMG and Backup/Restore (screenshots) than the official TWRP
However, like the official/unofficial 3.4.0, it still fails to decrypt data (on startup) for secondary user 999 (screenshots), it does only for user 0
full system restore working with with system image ?
hulyahulya said:
full system restore working with with system image ?
Click to expand...
Click to collapse
Yeah backup and restore works fine i tested it
Badis st said:
Yeah backup and restore works fine i tested it
Click to expand...
Click to collapse
i forget ask busybox is working on this twrp for flash script ?
hulyahulya said:
i forget ask busybox is working on this twrp for flash script ?
Click to expand...
Click to collapse
Yes i dont see why another recovery would make busybox unable to work, it's normal like the official twrp
03/08/2020 : New update > twrp 3.4.0-2
i backup my files twrp 3.4.0-1 after this my phone bootloop no reason . i dont understand what happened
---------- Post added at 05:26 PM ---------- Previous post was at 04:51 PM ----------
and restore not working 3.4.0-1 and 3.4.0-2
hulyahulya said:
i backup my files twrp 3.4.0-1 after this my phone bootloop no reason . i dont understand what happened
---------- Post added at 05:26 PM ---------- Previous post was at 04:51 PM ----------
and restore not working 3.4.0-1 and 3.4.0-2
Click to expand...
Click to collapse
backup and restore works, i tested it in 2 roms : msm and RR
if u want to backup other sensitive partitions like persist i suggest u to use terminal
this twrp works on xiaomi.eu android 11 ?
thanks
T-HeaD said:
this twrp works on xiaomi.eu android 11 ?
thanks
Click to expand...
Click to collapse
If the official 3.4.0 works (some people claim it does), this 3.4.0.2 should also.
This phone was released with A9, and it seems that SAR architecture of partitions did not change through the upgrades to A10 and now A11
T-HeaD said:
this twrp works on xiaomi.eu android 11 ?
thanks
Click to expand...
Click to collapse
Idk about xiaomi.eu but for msm xtended a11 it worked
U can try this if it doesn't, found it somewhere in telegram
https://t.me/randomdavinci/33877
Is there maybe a newer version for this custom TWRP?
I used to prefer 3.4.0-2 over the official 3.4.0-0 for the stock firmwares (Mi 9T, EEA) since everything worked smooth (like in official) but more partitions were supported for backup and restore.
It worked also fine for Xiaomi.eu Stable
However, I recently installed Xiaomi.eu Weekly A11 beta and this 3.4.0-2 does not ask for pin/pattern.
If I disable screen unock in Android, 3.4.0-2 also does not decrypt, hence it is not possible to work with Data and Internal memory (no, I don't want to flash any Vbmeta or disable encryption)
To the other side, for the official 3.4.0-0 decryption for Xiaomi.eu, beta A11 works both:
- if screen unlock is disabled
- if pattern is used for screen unlock.
(If pin is used, the official asks for the pin but fails to decrypt).
Hence, support for the upcoming A11 is substantially better with the official 3.4.0-0 than with this custom 3.4.0-2
I own Nothing of the contents i will provide below but i wanted to share with you This Amazing ROM that became Available to Our Device thanks to Iceows, DarkJoker360, Hamido and DotOS Team that made the GSI available. So make Sure to give proper Credits whenever you Publish this Method.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements :
- Unlocked Bootloader
- Darkjoker360's Twrp prague A11 edition : LINK
- Stock Emui Rom version below 400 for Rne-L21( For other variants i haven't tested yet which version you must have, but ofc don't be on the latest ones ).
- Patience.
- Follow my Steps.
What's working :
- Everything if you install all the fixes.
What's not working :
- Something probably you only have found about.
To Begin i recommend you download :
1- dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img.xz (none of the A-only builds worked for us so don't waste your time) and must be vndklite (IMPORTANT) : LINK
2- all the necessary 6 fixes from Iceows Sourceforge in this LINK
3- Hamidos Patch 1 and 2 to convert ab to a only. LINK I will add the patch 1 and 2 in the attachements.
Also your data have to be decrypted before installing this Rom (ignore this step if you have done this before), to do so download the decrypt zip file from this link and put it in your microSD directory : LINK
- Extract dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img.xz to your microsSD so you will obtain : dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img
- Put The 6 fixes Zips + hamido Patch 1 and 2 in your sdcard (Fixes exist in Iceows Sourceforge in the link provided previously).
So now you have these files in your MicroSD :
* dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img.
* Huawei-Decrypt-Emui_8.zip
* MakeHi6250-Iceows-v0.2-signed.zip
* AGPS-FIX-AltairVendor-v3.3-signed.zip
* NFC-FIX-Altair-v1.6-signed.zip
* DisplayEngine-FIX-Altair-v0.3-signed.zip
* LibAptx-FIX-Altair-v0.1-signed.zip
* Media-FIX-Altair-v0.1-signed.zip
* Patch1.zip
* Patch2.zip
Now Follow these easy Steps :
=============================
1) Format Data
Reboot to recovery TWRP and perform these steps
Code:
- Wipe > Format Data
then
Code:
- Reboot > Recovery
- Wipe Data
============================
2) Now in TWRP again, perform these steps:
Code:
- Wipe > Advanced Wipe :
Select only these partitions
[x] Dalvik / ART Cache
[x] Cache
[x] Data
[x] System
Swipe to format
============================
3) Install EMUI 8 decrypt file (not needed if you are already decrypted your data, move to step 4)
I previously put the zip file on my MicroSD, so:
Code:
- Install > Huawei-Decrypt-Emui_8.zip
Code:
Reboot > Recovery
============================
4) Install the system
Still in TWRP do:
Code:
- Reboot > Recovery
- Install > Install Image > Pick from your Micro SDcard "dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img" > flash it as system image (Warning not System only).
- Install zip > Flash Patch 1 then flash Patch 2
- Install zip > Flash the 6 fixes One by One.
============================
5) Resize the file system
After flashing the image reboot in TWRP by pressing back until you get to TWRP main screen then
Code :
- Reboot > Recovery
once rebooted again to twrp
- Wipe > Advanced Wipe > pick System Partition > Repair or change file system > Resize File System
============================
Code:
Reboot > System
===========================
6) ENJOY!
I followed your guide and managed to finally install a custom rom for my phone after years, it works well and I really thank you for sharing this! but i'm not sure how to root it. i tried to install magisk and supersu through TWRP but neither worked, I dont know what i did wrong.
Mastershaff said:
i tried to install magisk and supersu through TWRP but neither worked, I dont know what i did wrong.
Click to expand...
Click to collapse
Try the following:
1. Magisk root - first flash in TWRP M-Mount-Fix-11 , reboot into TWRP and flash Magisk.zip .
2. Superuser root - in TWRP flash
Phh-superuser-aonly , and install superuser appk download .
Maybe it will help you.
-Alf- said:
Try the following:
1. Magisk root - first flash in TWRP M-Mount-Fix-11 , reboot into TWRP and flash Magisk.zip .
2. Superuser root - in TWRP flash
Phh-superuser-aonly , and install superuser appk download .
Maybe it will help you.
Click to expand...
Click to collapse
Installing Superuser root worked. Thank you!
Mastershaff said:
Installing Superuser root worked. Thank you!
Click to expand...
Click to collapse
No problem.
Can you please suggest me which gapps works perfectly?? I’ve installed Opengapps nano but it doesn’t seem perfect to me because Chrome is getting crashed everytime I visit a website. Some apps can’t use location even though it’s allowed to use the location, like Chrome, Foodpanda.
Google Map works fine.
Messenger bubble isn’t working.
Also can you help me attaching the file “Media-FIX-Altair-v0.1-signed.zip” here?? The download link on sourceforge isn’t working.
Salekin_Limon said:
which
Click to expand...
Click to collapse
On dotOS try MindTheGapps, more stable when they launched. OpenGapps had some issues.
Or NikGapps basic. (you have to flash gapps before booting up the ROM!)
Salekin_Limon said:
Chrome is getting crashed
Click to expand...
Click to collapse
Try to update System Webview. Also you can try Chrome Beta :
guide
P.S.: In general, dotOS is the least suitable treble ROM for kirin devices, imo.
-Alf- said:
On dotOS try MindTheGapps, more stable when they launched
Click to expand...
Click to collapse
I tried, it was not installed saying that this package was for android 11 and it was not compatible with my android sdk, even though the package was MindTheGapps-11.0.0-arm64
-Alf- said:
Try to update System Webview. Also you can try Chrome Beta :
guide
Click to expand...
Click to collapse
Updated the System Webview, and followed the instructions after installing Chrome beta. It didn’t work for me. Even all the browsers (EDGE, Brave Browser) I installed, had the same issue except the system installed browser.
Flash dotOS gapps variant, it should work, imo...
-Alf- said:
Flash dotOS gapps variant, it should work, imo...
Click to expand...
Click to collapse
Many thanks. Everything is working really fine except for some apps.
Google Chrome issue remained unsolved.
Salekin_Limon said:
Google Chrome issue remained unsolved
Click to expand...
Click to collapse
Try Thor, Via or Dolphin
https://forum.xda-developers.com/t/...plus-a11-gsi-unofficial.4298551/post-86104931
Anyone manage to get VoLTE working ?
And there are 3 more files showing up in the sourceforge download link so shall I install those as well ?
The first file says 0-BigPatch-Altair-v0.1-signed.zip
And second one is 7 - VoLTE-FIX-A11-Altair-V1.4-signed.zip
The 3rd is VoLTE-FIX-A11-NoT-V1.5-signed.zip
Razr1804 said:
VoLTE working
Click to expand...
Click to collapse
On emui 8 try the following:
https://forum.xda-developers.com/t/...-0-9-with-working-volte.4356215/post-85877725
-Alf- said:
On emui 8 try the following:
https://forum.xda-developers.com/t/...-0-9-with-working-volte.4356215/post-85877725
Click to expand...
Click to collapse
I tried this method all day and I managed to boot it up but no luck with volte, The call seems to dial (and reaches the other end) but the calling screen shows that the 'call is ended', I even tried applying magisk fix as well as the zip provided for volte still no luck.
One more thing the TWRP seems to be stuck on Darkjoker360'sTWRP Prague A11 edition.
I tried it with Huawei Mate 10 Lite RNE-L01. Everything works fine but NFC doesn't work. Is there any solution?
teknolojiazmani said:
I tried it with Huawei Mate 10 Lite RNE-L01. Everything works fine but NFC doesn't work. Is there any solution?
Click to expand...
Click to collapse
NFC...Mate 10 lite...