Ultimate Q (A505XX) Variants ROM - Samsung Galaxy A50 ROMs, Kernels, Recoveries, & Ot

Utimate Q Rom
lots of under the hood tweaks great battery based off stock very debloated same as A20 A30 and A40 now Ultimate Q for A50
Rom Download https://drive.google.com/file/d/1Lx22Z2mzpQmTxQidCMin1846w84Gsg6D/view?usp=sharing
Rom with kernel stock debloated with Magisk https://androidfilehost.com/?fid=4349826312261799780
kernel source https://github.com/prashantpaddune/android_kernel_samsung_a50dd
kernel credits @prashantp01
no Magisk added to rom
flash an enjoy
Telegram https://t.me/ultimate_Pie2

No screens or change log?
also the download no work;
"OOPS!
no mirrors found."

InFam0us-1985 said:
No screens or change log?
also the download no work;
"OOPS!
no mirrors found."
Click to expand...
Click to collapse
check again its working or come to telegram

link has been fixed

Thanks for the new ROM. Will definitely try it and report back. But, I think a features list, bugs (if any) should be posted to op. I went to the telegram group and can't seem to find the rom features for a50.

L3R0N said:
Thanks for the new ROM. Will definitely try it and report back. But, I think a features list, bugs (if any) should be posted to op. I went to the telegram group and can't seem to find the rom features for a50.
Click to expand...
Click to collapse
a20 a30 a40 all have the same rom iam doing a series phone in telegram if you look at photos there is tons and yes ill get a list here eventually

I can't get passed extracting Vendor. What is going on here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It works for me https://youtu.be/OnALLXFpXGg
install instruction: enter TWRP, format data, reboot to Power off, enter TWRP and install the ROM then Reboot to System ( boot system without magisk ), after Setup the phone, you can boot system with magisk ( Reboot to Recovery )

This works really well. The installation took a bit longer than usual but everything went smoothly (all you need is some patience to let it do its thing). Bootup speed was the usual. I would've loved if Bixby stuff was removed. Also I thought this was a bare minimum install but I got things I don't need or want or use. Items such as Root Explorer, Es file explorer, blue mail, niagara launcher. And they can only be disabled. Maybe remove them from the main build and have them as a flashable addon in the future? Air Command keeps crashing for me so it doesn't work. I don't need it anyway. Overal an awesome rom. Performance is also great. Would this work with Quantum Kernel?
Edit:
Bluetooth devices need to be paired after every reboot. Not sure if this is an issue with everyone or just me. Gotta pair my Galaxy Buds and Galaxy Watch every time I reboot. Also, Samsung Account keeps asking me to login again in order to use Samsung Services securely.

After reboot in root (recovery) mode, device hangs at lock screen and crashes.

shumway66 said:
Utimate Q Rom
Rom Download https://drive.google.com/file/d/1Lx22Z2mzpQmTxQidCMin1846w84Gsg6D/view?usp=sharing
Rom with kernel stock debloated with Magisk https://androidfilehost.com/?fid=4349826312261799780
Click to expand...
Click to collapse
There is no Magisk on the second ROM ( androidfilehost ), but Magisk is included on the First ROM ( google driver ). I think you need add descriptions about these ROMs please... like what different ROM 1 and ROM 2.. Thanks
---------- Post added at 05:50 AM ---------- Previous post was at 05:48 AM ----------
EonOfBlack said:
After reboot in root (recovery) mode, device hangs at lock screen and crashes.
Click to expand...
Click to collapse
First boot, don't reboot to Recovery but Reboot to System, after complete setup the phone then you can Reboot to Recovery ( boot system with magisk )

L3R0N said:
This works really well. The installation took a bit longer than usual but everything went smoothly (all you need is some patience to let it do its thing). Bootup speed was the usual. I would've loved if Bixby stuff was removed. Also I thought this was a bare minimum install but I got things I don't need or want or use. Items such as Root Explorer, Es file explorer, blue mail, niagara launcher. And they can only be disabled. Maybe remove them from the main build and have them as a flashable addon in the future? Air Command keeps crashing for me so it doesn't work. I don't need it anyway. Overal an awesome rom. Performance is also great. Would this work with Quantum Kernel?
Edit:
Bluetooth devices need to be paired after every reboot. Not sure if this is an issue with everyone or just me. Gotta pair my Galaxy Buds and Galaxy Watch every time I reboot. Also, Samsung Account keeps asking me to login again in order to use Samsung Services securely.
Click to expand...
Click to collapse
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .

I'm using Quantum kernel with it .
Click to expand...
Click to collapse
How do you go about this? Flash the rom and then the GSI kernal? or does it not matter?
Just tried to install lineage os 17 but had no joy.

InFam0us-1985 said:
How do you go about this? Flash the rom and then the GSI kernal? or does it not matter?
Just tried to install lineage os 17 but had no joy.
Click to expand...
Click to collapse
This is still oneui so I think you need to use the oneui kernel with it. Flash rom, then kernel.
---------- Post added at 08:49 AM ---------- Previous post was at 08:48 AM ----------
immortalized2018 said:
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
I'll give it another try and see if it is fixed. Or maybe I'll do a clean rom myself. Been a while since I got my hands dirty ?

immortalized2018 said:
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
I got the same problems with Bluetooth after I rooted the magisk module mentioned here works very well. I never had to re pair my Bluetooth devices again.

usb debugging ..not working

Just flash Ultimate R tomorrow night the smooth rom workig very well no any bug i found

mehmetuman said:
usb debugging ..not working
Click to expand...
Click to collapse
Working in ultimate R

Work A505GT Android 11 downgrade to Android 10..
You have Ultimate Pie to A505GT?

Can you uninstall the system app without the cell dying ??? and .... Can you bring android pie for binary 7 please

Related

[ROM][6.0.1][D5803] Concept Plus Rom (UB Only)

Hello everyone,
Just wanted to share my personal build based off the latest concept rom, saw that there weren't any active builds for concept so I decided to share my own, nothing fancy, just a few basic features
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Code:
Based off latest Sony Concept Firmware- .3657
Full root access- (Rooted with Super SU (2.79) + DM-verity removed + latest busybox (1.26.2))
Deodexed
Removed AOSP core apps- replaced with Google apps- Dialer, Contacts, Messaging
Debloated (Apps can be found in Play Store)
Zipalign
Init.d support in system & kernel + init.d tweaks
Sqlite tweaks
Superuser mod for signature verification
Optimized Qualcomm GPU files
Plus a few other things :)
Disclaimer
Code:
Flash at your own risk, I am not responsible for any data loss, any bricked or dead phones. Always make backups
Instructions:
*** Please make sure your bootloader is unlocked and you are already rooted and running the latest concept rom ***
D5803 only
1) Reboot recovery- TWRP is recommended
2) Wipe the following partitions:
System
Data
Cache
Dalvik
3) Install rom
4) *** Recommended- Install DRM Fix to restore camera functionality here ***
Reboot
Please note first boot may take a long time- be patient
Important- Go to settings-apps-default apps-set Phone to Google Dialer
Screenshots
Downloads
Please note this initial release is a beta, everything should work as intended but you never know
https://www.androidfilehost.com/?fid=745425885120702422
MD5: 3f92a785b954cd7b62b8e362fe4aa271
Coming Soon
Extra debloating + guide
Battery life guide for concept + recommended apps
Feel free to suggest improvements
Credits
Sony Concept Team
@Chainfire
@Ticklefish
@osm0sis
@serajr
@franciscofranco
@DavidMKD
@Androxyde
If I forgot to add you to credits please let me know and I will add ASAP :good:
Please press thanks if you like the rom
.
Debloat Guide
Below is a list of system apps that are potentially safe to remove.
Always make sure to have backups.
My recommended app is Titanium Backup to remove/disable apps.
If you are unsure, try freezing/disabling a few apps to see how things go
Second List- Stats
This is a list of system Sony Data collection /Stats apps. I have been testing these for a day or so and they appear fine to remove but this one is a maybe, please note that I do not use sony apps like keyboard or xperia home, only the xperia email so thse sony apps may/may not be related to those apps. You can always try for yourself and see:
If you are unsure about an app I will do my best to try and figure out what it is. Also if I missed any or if anything needs to be added please let me know :good:
To state the obvious, if you are uninstalling things like stock launchers, keyboards and things, always make sure to have the replacement app set up before you uninstall things
Good Luck
One more
First! ... this ROM is based Stock? Compatible with the model D5833?
Thank you very much for the support
pickandrew said:
First! ... this ROM is based Stock? Compatible with the model D5833?
Thank you very much for the support
Click to expand...
Click to collapse
Hi there,
This is not based off stock, this is based off Sonys Concept Rom, you can find more info here:
https://forum.xda-developers.com/z3-compact/general/sonys-android-concept-marshmallow-t3229536
It's more lightweight than stock and is closer to AOSP, with a few sony features.
I dont have a D5833 so I cannot confirm if this works or not, if you want to try it you can, just make sure to a have a backup ready
Hey there, thanks for this ROM!
I'm on latest Concept with SuperSU 2.79SR3 and Xposed installed. Could I dirty flash your ROM if I uninstall Xposed first? Or should I wipe everything?
What about the camera quality in comparison to stock? Is fisheye effect present?
systemallica said:
Hey there, thanks for this ROM!
I'm on latest Concept with SuperSU 2.79SR3 and Xposed installed. Could I dirty flash your ROM if I uninstall Xposed first? Or should I wipe everything?
Click to expand...
Click to collapse
Clean flash is always recommended to prevent future issues. Best to play safe and do a full wipe :good:
birsir said:
What about the camera quality in comparison to stock? Is fisheye effect present?
Click to expand...
Click to collapse
Camera quality should be same as stock, no fisheye.
This ROM is based off official Sony Concept firmware
Second post updated with debloating list. If you want me to provide explanations for each app I am happy to do so.
As always, make sure to backup before modifying your system., I always recommend Titanium Backup to remove/backup apps.
I have taken system apps down from about +-150 to about 85.
I have also disabled a few extra things that are not on the list like NFC services because I don't use this feature.
Good luck :good:
I get error 7 when installing. I delete this lines in the zip and get error 6. I can' t install the rom! What can i do?
dav6wat said:
I get error 7 when installing. I delete this lines in the zip and get error 6. I can' t install the rom! What can i do?
Click to expand...
Click to collapse
Zip installs fine for me, please can you provide more information? Just saying you get status 7 is not very helpful.
1) Have you tried re-downloading the rom and checking the md5 to make sure it is not corrupted.
2) This has only been tested on D5803, D5833 may not work
Also make sure you are running the latest version of TWRP and that you are already running concept rom and is rooted
22sl22 said:
Zip installs fine for me, please can you provide more information? Just saying you get status 7 is not very helpful.
1) Have you tried re-downloading the rom and checking the md5 to make sure it is not corrupted.
2) This has only been tested on D5803, D5833 may not work
Also make sure you are running the latest version of TWRP and that you are already running concept rom and is rooted
Click to expand...
Click to collapse
My device is D5803 too. I try 2 downloaded rom ams checked md5. Is this the latest TWRP recovery https://dl.twrp.me/z3c/twrp-3.0.2-1-z3c.img.html ?? I think could be the recovery...
may I suggest including DRM restore function?
https://forum.xda-developers.com/crossdevice-dev/sony/xperia-z1-z2-z3-series-devices-drm-t2930672
Edit: I saw it's included in OP.
dav6wat said:
I get error 7 when installing. I delete this lines in the zip and get error 6. I can' t install the rom! What can i do?
Click to expand...
Click to collapse
Try redownloading the ROM.
This is the screenshot of the error 7. I' m in Concept 3657, rooted with superSU 2.79, with TWRP 3.0.2-1.
If i edit script in zip file, deleting assets line, and rename file to 220117_Concept_Plus_Beta2.zip, then gives me error 6.
dav6wat said:
This is the screenshot of the error 7. I' m in Concept 3657, rooted with superSU 2.79, with TWRP 3.0.2-1.
If i edit script in zip file, deleting assets line, and rename file to 220117_Concept_Plus_Beta2.zip, then gives me error 6.
Click to expand...
Click to collapse
Have you tried redownloading the rom
---------- Post added at 10:50 AM ---------- Previous post was at 10:48 AM ----------
So I am having Bluetooth issues and when someone is calling me it doesn't display the thing where it says to answer,I need to wait for the person to hang up then call them back.
Could it be because I flashed this ROM over CM12.1?
Have you tried redownloading the rom
Click to expand...
Click to collapse
Yes, I redownloaded 4 times, and same error.
dav6wat said:
Yes, I redownloaded 4 times, and same error.
Click to expand...
Click to collapse
For me sometimes it would work to flash TWRP MultiROM recovery from here:
http://www.dl.myself5.de/aries/MultiROM/TWRP-Multirom-20160606-00-aries.img
If it doesn't want to download then long press on the link and press the last option which should say like "Download connection".
Dinkec27 said:
Have you tried redownloading the rom
---------- Post added at 10:50 AM ---------- Previous post was at 10:48 AM ----------
So I am having Bluetooth issues and when someone is calling me it doesn't display the thing where it says to answer,I need to wait for the person to hang up then call them back.
Could it be because I flashed this ROM over CM12.1?
Click to expand...
Click to collapse
Yes, possibly. As per first post, please make sure you are already running the concept rom and are rooted. Also make sure to set Google Dialer as default dialer
22sl22 said:
Yes, possibly. As per first post, please make sure you are already running the concept rom and are rooted. Also make sure to set Google Dialer as default dialer
Click to expand...
Click to collapse
Oh okay,then I will reflash to concept,root it and install the rom again and I will keep you up to date.

[Discontinued][ROM][UNOFFICIAL]LineageOS[7.1.2][VoLTE][OMS][Reloaded]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Credits
Lineage Team.
@Shrukul
@riteshsaxena
@RakeshBatra
@DKnightX91
@L D (Matssa56)
If i missed anyone sorry !! Let me know i ll add.
Features
Lineages Features
Added VoLTE icon
Some useful apps(refer SS)
Magisk
OMS
Pixel Dialer
VoLTE Modem Inbuilt
Installation
How to flash
--> Download the latest build
--> Download Gapps
--> Full wipe and factory reset
--> Flash ROM using latest twrp
--> Flash Gapps
--> Reboot
If possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues.
Enjoy..
Note
Set default Phone App.
Flash Latest Gapps only.
Let ROM to settle.
Bugs
Yu tell me.
DOWNLOADS
Lineage
Gapps​
Sources
Lineage Github
>Kernel​
XDA:DevDB Information
tomato, ROM for the YU Yureka
Contributors
vinoth_raja
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2017-04-28
Last Updated 2017-10-21
Reserved
SS
YU FORUM: http://forums.yuplaygod.com/threads...-2-volte-reloaded-oms-updated-28aprl17.48881/
..
How will root work.....I have updated magisk app.............there is showing properly root in green colour in magisk app ...but when i try to give root access in any app it doesn't appear....it shows rooted device require........ How can I solve this ..plz tell me..........n could u plzzz replace magisk app............our previous version was better in the field of root ......there was an option in developer option...... But in this ROM there is option in developer options ...but there is only 2 options.....1st disable n second adb only......where did go apps only n adb n apps both ....option .........plzzz try to bring that option again ...it was more easier that magisk app........n we knew cm for that root option .....why do u want to make cm ROM like other ROM ......where we need to install apps to get root access....
hackersamraj said:
How will root work.....I have updated magisk app.............there is showing properly root in green colour in magisk app ...but when i try to give root access in any app it doesn't appear....it shows rooted device require........ How can I solve this ..plz tell me..........n could u plzzz replace magisk app............our previous version was better in the field of root ......there was an option in developer option...... But in this ROM there is option in developer options ...but there is only 2 options.....1st disable n second adb only......where did go apps only n adb n apps both ....option .........plzzz try to bring that option again ...it was more easier that magisk app........n we knew cm for that root option .....why do u want to make cm ROM like other ROM ......where we need to install apps to get root access....
Click to expand...
Click to collapse
Refer yu Forum i've made a unrooted build too. try it. You can find that options in Magisk itself.
Please tell us how can we get root access.......... I tried to update magisk app n installed magisk version v12.0......... I want to get root access............ Plzz tell me how can I get.........will I have to flash SuperSU zip to get root access .. .....I seen in supersu thread which was SuperSU rs3 ....will that work on this ROM ????? Will u try to test ???
Hey Friend welcome to xda its good to see you here thanks. i am using your updated rom and its working fine too brother.
hackersamraj said:
Please tell us how can we get root access.......... I tried to update magisk app n installed magisk version v12.0......... I want to get root access............ Plzz tell me how can I get.........will I have to flash SuperSU zip to get root access .. .....I seen in supersu thread which was SuperSU rs3 ....will that work on this ROM ????? Will u try to test ???
Click to expand...
Click to collapse
Updating Magisk is enough to get root access. check here It is present in Magisk settings.
phone not working.
I am not able to dial calls . There is no screen when i click to dial. Even incoming calls also I get only ringtonee. Nothing appears on the screen. I am not able to receive the call. Please HELP.
Sarvesh2000 said:
I am not able to dial calls . There is no screen when i click to dial. Even incoming calls also I get only ringtonee. Nothing appears on the screen. I am not able to receive the call. Please HELP.
Click to expand...
Click to collapse
You need to set Default phone app manually.
Note: You should go to Phone App info>phone App>set default phone app, to make dialer work.
See there .....I'm getting only one option in root access .....there is no any option of apps n other thing..........
hackersamraj said:
See there .....I'm getting only one option in root access .....there is no any option of apps n other thing..........
Click to expand...
Click to collapse
Go to Magisk settings. U can find Super User Access Apps & Adb , Apps only, etc there.
hackersamraj said:
See there .....I'm getting only one option in root access .....there is no any option of apps n other thing..........
Click to expand...
Click to collapse
Hey bro how did you put the wallpaper on the background!
Sarvesh2000 said:
I am not able to dial calls . There is no screen when i click to dial. Even incoming calls also I get only ringtonee. Nothing appears on the screen. I am not able to receive the call. Please HELP.
Click to expand...
Click to collapse
Set phone as default app in settings.
When will u release it next built n could u please add audiofx app in this ROM !!!! I'm missing that app a lot....
N there is another app is called files .........it was in the setting in n7.1.1 ....why is it in the apps menu ?????? Try to remove this app from app menu.....
vinoth_raja said:
Refer yu Forum i've made a unrooted build too. try it. You can find that options in Magisk itself.
Click to expand...
Click to collapse
Magisk is said to have issues with Lineage Roms . You might want to recheck it .
1ambharath said:
Magisk is said to have issues with Lineage Roms . You might want to recheck it .
Click to expand...
Click to collapse
What kind of issues?
New Build
►New VoLTE Blobs (Credits: ishantvivek)
►Updated Magisk
►Full OMS Support
►Added N/w Traffic Indicator
►Nano Gapps supported
►Compiled with LLVM
►Updated Reloaded Stock kernel (Credits: @riteshsaxena)
►Reverted to stock dialer
►No modifications everything is stock.
For source changes visit Lineage's Github.
Note: Clean Flash Recommended, Dont report bugs on dirty flash as well as on Custom kernels.
Downloads
◙ Lineage
◙ Gapps

Flyme7.8.7R For the Leeco X720 and X727

(7.1) Flyme7. Fingerprint infrared V3 For the Leeco X720 and X727 ( Updated on 9/5/2018 )
AKA: The newest version of Flyme Original Chinese Name : 7to-X720.flyme7.指纹红外V3.zip
Developer: Cold and Ruthless
Original Link: http://rom.7to.cn/romdetail/1030273
Link: https://mega.nz/#F!xYJgXYxK
Key: !QNUTt-aMXA-Kvl39hOMp9A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme:
LeTV pro3 transplant Flyme7.8.21R V3
Redesigned interface, better overall experience
Advanced settings root card brush package
Optimized sound
Author: Cold ruthless
Release Date: 2018-09-04
Android version: 7.1.x
UI type: Flyme ROM
Size: 1270.00MB
Experience the new interface, with advanced settings, high speed, theming options, and excellent call and sound quality, all are hallmarks of the Meizu Official Experience
Applicable models: LeEco LEX720, LEX727
Optimization of the optimized
volume of the bottom package update sound.
Temperature control based on port from: Charm Blue Note 6 Build
Double Wipe> reboot to Recovery, if you have an error you may need to format storage
The first boot is very slow, please wait for the Meizu official latest experience version transplant
Past Bluetooth issue resolved.
Optimization scheduling
New interface new experience, advanced settings and optimization
Installation Notes:
First Boot may be slow, so if it takes a while for the first system boot, the solution is just to wait longer.
Flyme Account http://forum.flymeos.com/
Create an Official Flyme account if you want to gain access to tons of addons.
Meizu is Port friendly and Flyme Account Provides:
Forum advice
Plugins,
Apps,
3rd party themes etc.
Download Flyme 7 Launcher, Stock Wallpapers, and Apps (Flyme 7 stock APK)
https://www.androidsage.com/2018/05/15/download-flyme-7-launcher-stock-wallpapers-apps-apk/
As always, flash anything under your own discretion
Root
This Rom comes with Magisk root, You can easily flash Magisk 17.1 overtop after setting up the system and then rebooting to recovery.
Gapps: I am using BeansGapps-Mini-7.1.x-20170725.zip
Helpful files:
https://mega.nz/#F!JMYSSCLQ
Key: !xgQFTB69PE-hL8RTUbpUIw
Firmware
https://mega.nz/#F!oAZ3yC4b!
Key: MDwbHXNTRdrpgMvQ42yviw
If you have safetynet issues, follow the steps below
Extract the boot.img file from the rom, and placed the boot image into storage.
Open Magisk and use install to Patch Magisk to the boot.img.
Reboot to recovery, install the patched boot.img to boot
Flash addonsu-15.1-arm-signed.zip, and then reflash Magisk again, from storage then use advanced options to clear cache, and then reboot to system.
With these steps you will always Pass Safetynet and be playstore certified
https://forum.xda-developers.com/showpost.php?p=77367331&postcount=4790
Build Prop Recommendations
After the installation and initial testing period,. you may decide to continuing using Flyme for a while:
If so you can further optimise the ROM with these build prop and edits posted below.
First backup your existing buildprop
* ro.product.locale.language = en ( or your language)
* ro.product.locale.region = IN or your country
* persist.sys.timezone = your country ( see proper entry here: https://gist.github.com/arpit/1035596)
* persist.sys.meizu.region =
or use persist.sys.oem.region= your country google correct acronym for your country
Reserved for future hints
Thanks I will try and feedback
i get error code 3 when i try to flash
rob_z11 said:
i get error code 3 when i try to flash
Click to expand...
Click to collapse
Me Too!
Yes, I tried it and the same thing happened to me, it must be a corrupt download because people are giving the release a 8.3/10. I found a slightly older but highly rated rogue pig version. ( see same link above)
I installed it successfully and must say, it's actually extremely good.
Corruption
The original newer file is probably just corrupted so I am going to try redownloading it. Until then, check out the other version that I placed in the same megadrive folder see the link above. Yes, it's a little older but its actually awesome!
I just attempted to find the newer rom by cold ruthless on the BBS website, has he been banned. I had a bookmark saved and when I click I get this message " Authors are banned or deleted automatically blocked" Not sure if its the same person or not, if this next download is corrupt. I would still recommend flyme_LEX720_rogue_6.8.3.17R-beta, I am testing it right now and like it alot.
Does Android Pay work with this ROM?
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
It looks like what happened to me when going from an Oreo rom to Nougat, you have to format data not only wipe data. Format data, write "yes" and then install the rom. Always have a backup of your data before.
flyme is one of the best system , the official one is good but it's old , be sure to have eui firmware before flashing flyme .
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Please can you put the link of old recovery version
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Did you format internal storage?
3llawi said:
Did you format internal storage?
Click to expand...
Click to collapse
No because I have always been on miui10
can some1 link me the gapps?
collisiion said:
can some1 link me the gapps?
Click to expand...
Click to collapse
Look at the post #1
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
andrew2401 said:
Does Android Pay work with this ROM?
Click to expand...
Click to collapse
I believe so, though I haven't tried it yet. I will let you know late tonight
tsongming said:
I believe so, though I haven't tried it yet. I will let you know late tonight
Click to expand...
Click to collapse
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
tsongming said:
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
Click to expand...
Click to collapse
Ok, this is what I have found. Your original latest flyme seems to be working ok. Here is what I have done. Using RAR apk, I unzipped it, and it complained about one apk in mizu-apk folder, and I ended up removing that folder completely, and zipped the ROM again. It flashed without any issue, but I can't seem to get Data to turn-on. It turns on briefly during the boot, but it goes away. I think if I compare the build.prop from older version with newer version, I may be able to find the fix.
andrew2401 said:
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
Click to expand...
Click to collapse
Extremely good, at the moment my phone has no OS at all..
I only glanced at battery life briefly yesterday with Gsam battery tool. Plus, I installed BlackScreen 5.3 r2 which worked fine, I would rather wait for a real answer. Otherwise it would just be a guess.

[ROM][Unofficial][AOSP9r46/Pie & AOSP10r41][X/X Dualsim/X Compact]2020-11-01 builds

[ROM][Unofficial][AOSP9r46/Pie & AOSP10r41][X/X Dualsim/X Compact]2020-11-01 builds
Downloads : see the AOSP9 release post (no gapps) and AOSP10 release post (gapps & non-gapps builds)
Required
OEM: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.zip
Install
Backup whatever you can't afford to loose ! Also search for "TA partition backup" if you never heard of it...
Have unlocked device
Have fastboot command installed
Download and extract the ZIP file related to your device
Download and extract the OEM ZIP file
Phone powered-off, keep Volume-Up key pressed while plugging it to computer with USB cable
Run the following fastboot commands, adjusting path to .img files as needed
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img (optional, skip if you want to keep twrp)
fastboot flash oem SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.img
Unplug the USB cable, wait for ~30 seconds then power on the device
Build characteristics
AOSP9 : PQ3A.190801.002, 2019-08-01 security patch
AOSP10 : QQ3A.200805.001, 2020-08-05 security patch
Kernel 4.9.230
Credits: the fine folks contributing to Sony Open Devices Project
These roms are provided in case they're useful, no promises, no guarantees...
Only f5121 and f5321 builds were basic-tested (call, sms, data, wifi, camera, bt, fingerprint),
no battery drain, over-heating nor intempestive reboot seen after a few hours mostly idle.
GApps, GStore, GCam and Magisk reported to work when proceeding with care (see this post)
finally something new for suzu thanks i'll test it later
vknecht said:
no battery drain, over-heating nor intempestive reboot seen after a few hours mostly idle.
Click to expand...
Click to collapse
Are you sure no reboot?
lookmanns14 said:
Are you sure no reboot?
Click to expand...
Click to collapse
i testing it right now and post a little "review" soon
for now i can only say it boot with gapps and magisk flashed
edit: when it booting on there were only a few minor errors in adb logcat so i think it will be a quiet stable rom
Adi_OP said:
i testing it right now and post a little "review" soon
for now i can only say it boot with gapps and magisk flashed
edit: when it booting on there were only a few minor errors in adb logcat so i think it will be a quiet stable rom
Click to expand...
Click to collapse
Thanks appreciate it...if there no random reboot issues,it would be nice
Flashed it on my f5121 and it's best rom for suzu right now.
No bugs at all, baterry life and prformance is great.
No random reboots (at least no reboot happened to me).
GApps/GStore working. Magisk too. Im not able to test NFC, 5GHz wifi and cast so idk if it works.
Unfortunately I'm back to nougat PA rom because
drivedroid app not working on this rom (it not working on any rom even on stock only on PA lol)
but if you not using it, this rom probably will be your daily rom.
I'm will flash this ROM soon and i'm gonna write a post about it after a "week experience". I'm still gonna write any "strange behaviours" during usage, if necessary. I hope for the best
installation help
HELP
Hello to all ..
I have already installed other roms ...
I do not have the skills to install this rom
I tried with the adb commands .. but it doesn't install ... you can explain how to install this rom .. thanks
Adi_OP said:
Flashed it on my f5121 and it's best rom for suzu right now.
No bugs at all, baterry life and prformance is great.
No random reboots (at least no reboot happened to me).
GApps/GStore working. Magisk too. Im not able to test NFC, 5GHz wifi and cast so idk if it works.
Unfortunately I'm back to nougat PA rom because
drivedroid app not working on this rom (it not working on any rom even on stock only on PA lol)
but if you not using it, this rom probably will be your daily rom.
Click to expand...
Click to collapse
Did you check it Gcam works?
twain55 said:
Did you check it Gcam works?
Click to expand...
Click to collapse
Gcam works
Davidemondo said:
I tried with the adb commands .. but it doesn't install ... you can explain how to install this rom .. thanks
Click to expand...
Click to collapse
I've added details about install instructions ; note the crucial part of those is with fastboot, not adb.
installation ok
vknecht said:
I've added details about install instructions ; note the crucial part of those is with fastboot, not adb.
Click to expand...
Click to collapse
thanks
just installed .... 100% cpu .. in alternation
I can tell you guys that 5GHz wifi works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Xperia X (AOSP) using Tapatalk
Lihxor said:
I can tell you guys that 5GHz wifi works
Click to expand...
Click to collapse
What about for random reboot problem bro. Do you have it?
yns_rdm said:
What about for random reboot problem bro. Do you have it?
Click to expand...
Click to collapse
I'm gonna be able to answer correctly to this question after some days of usage. BTW, since i flashed i only got an unexpected reboot after flashing Magisk (so it's not that unexpected) and i had to reboot once because i've got some problems with wifi but this is a bug that i found on other pie ROMs too. I'll let you know in the following days if this issue is too annoying
Sent from my Xperia X (AOSP) using Tapatalk
This aosp build is pretty fast...but one and only,I just got reboot issues while try to use recent app switcher (gesture)
Lihxor said:
I'm gonna be able to answer correctly to this question after some days of usage. BTW, since i flashed i only got an unexpected reboot after flashing Magisk (so it's not that unexpected) and i had to reboot once because i've got some problems with wifi but this is a bug that i found on other pie ROMs too. I'll let you know in the following days if this issue is too annoying
Click to expand...
Click to collapse
Thanks Lihxor for your reply. I will wait for your usage experience for following days.
lookmanns14 said:
This aosp build is pretty fast...but one and only,I just got reboot issues while try to use recent app switcher (gesture)
Click to expand...
Click to collapse
Maybe with a clean flash all our little issues would vanish. Anyway, compared to a 2.9 Havoc GSI that i was using before flashing this AOSP i can say that (for now) this ROM looks smoother and more stable. I'm also trying to increase battery life by tweaking stuff with kernel adiutor
Sent from my Xperia X (AOSP) using Tapatalk
Lihxor said:
Maybe with a clean flash all our little issues would vanish. Anyway, compared to a 2.9 Havoc GSI that i was using before flashing this AOSP i can say that (for now) this ROM looks smoother and more stable. I'm also trying to increase battery life by tweaking stuff with kernel adiutor
Click to expand...
Click to collapse
Yeah I do clean flash..but its okay,I don't blame anyone because aosp have this issues since oreo,what wrong with aosp on sony phone btw :laugh: ...what should we do
lookmanns14 said:
This aosp build is pretty fast...but one and only,I just got reboot issues while try to use recent app switcher (gesture)
Click to expand...
Click to collapse
lookmanns14 said:
Yeah I do clean flash..but its okay,I don't blame anyone because aosp have this issues since oreo,what wrong with aosp on sony phone btw :laugh: ...what should we do
Click to expand...
Click to collapse
Could you get logcat/dmesg/ramoops logs from the crash ? And describe how to reproduce if possible ?

[CLOSED][Magisk TWRP Installer] xXx NoLimits [SM-N986B Exynos]

xXx NoLimits ☆ Magisk TWRP Installer- SM-N986B Exynos ☆
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
☆ Magisk TWRP Installer ☆
This is originaly a Magisk TWRP Installer made by xXx for OnePlus 8 Pro.
I just took and modified it to get it work on our Samsung Galaxy Note 20 5G Ultra.
Our Dr.Ketan helped me to fix the TWRP Installer with the path of the recovery partiton.
1. Before using this Installer you must need following!!!!...... else it wont work:
- Root your device like Dr.Ketan mentioned in his Root thread!!! --> [Guide] How to root N20 Ultra (N986B)(N9860)
2. How you can use this TWRP Installer?
- Download the Magisk TWRP Installer from post 2
- Just open Magisk -> Go to Modules -> Press Install from storage -> Choose the TWRP Installer -> Flash and press Reboot
Congratulation now you flashed TWRP made by ianmacd
3. How to update the Magisk TWRP Installer?
-Download the latest TWRP from Ian and swap only the .img file inside the .zip and repeat point 2.
Credits
@xXx ; @Dr.Ketan ; @ianmacd
​
Source from TWRP made by Ian:
https://github.com/ianmacd/twrp_c2s
Telegram Group:
Be my guest at Samsung Galaxy Note 20 / 20 Ultra
☆ Downloads ☆
Android 11
TWRP_3_5_0_10-A11_6_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_5_0_10-A11_1_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
Android 10
TWRP_3_4_0_1a23_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a20_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a19_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a18_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a16_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip​
reserved..........
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/galaxy-note-20-ultra/development/recovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
nawaf2816 said:
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/ga...ecovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
Click to expand...
Click to collapse
Exactly for that purpose it is made my friend ?
Let us know the result
xenix96 said:
Exactly for that purpose it is made my friend
Let us know the result
Click to expand...
Click to collapse
I have successfully installed it and installation was very quick & smooth! :good:
I will keep monitoring for any issue may arises , hopefully non ..
Thank you dude, Good work !
Good job :good:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
nawaf2816 said:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Click to expand...
Click to collapse
Vitalik666teen said:
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
Click to expand...
Click to collapse
I hope our devs can manage to solve the issues in the twrps.
For flashing roms, kernel, magisk, twrp etc it is working at the moment
can i install this TWRP on device N981B
tnx
usitaly said:
can i install this TWRP on device N981B
tnx
Click to expand...
Click to collapse
This recovery is only for N986B.
Sorry mate
Oh what the hell.
I tried that on my one plus 8 pro when I had it.
Can you do snapdragon as well?
When will the system recovery partition be supported. In TWRP ??
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
What is the way to flash I use the old version
Is mtp fixed in this version?
songoku1 said:
Is mtp fixed in this version?
Click to expand...
Click to collapse
Good question.
I didnt test it cause i use the sd card which is working great.
Let us know if you want test and have a result ?
xenix96 said:
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
Click to expand...
Click to collapse
Where can I find this telegram channel?
Uploaded new ianmcd a19 TWRP in post #2
Just flashed over Magisk without a issue :good::good::good::good::good:
Changelog:
Samsung TWRP unofficial build announcements
(Ian Macdonald)
The following alpha 19 releases for devices launched with Android 10 have, in addition to the latest round of TWRP fixes, a couple of new features:
* When using the file manager, it is now possible to open a terminal in the currently selected folder. This currently works only on devices with TWRP in portrait orientation.
* logd now runs in recovery, so adb logcat will now work when the device is booted to TWRP.

Categories

Resources