Brazilian Case - Sony Tablet S (SGPT131BR/S) - Sony Tablet S

Hello!
My tablet is not rooted. I am trying to download an earlier official version or equal to the current (4.1.1 release 2) by Windows because the wifi just stopped working.
I downloaded the following files: (Brazil)
ICSR5A
info.update.sony.net/ST002/nbx03_045/contents/0003/signed-nbx03_045-ota-121116105.zip
ICS Release 1a
info.update.sony.net/ST002/nbx03_045/contents/0002/signed-nbx03_045-ota-120804014.zip
However, after downloading them, I can not unpack them due error. I'm downloading by Windows, is that the problem?
I have a Sony Tablet S (SGPT131BR / S) and the current version of Android (4.1.1r2) are only connecting on shared WiFi and there are no modems or routers direct. So I want to go back to the ICS and redo the upadte to Jelly Bean or download the same version directly.
I should just rename the file extension? .ROM .apk?
Any tips?
Grateful

up
Maybe it was not clear: I would downgrade to the first version (factory)!

Errors ...
My gadget is no wifi. I'm downloading the zip file indicated by Windows and am subsequently transferring to the SD card tablet.
I have tested unzip the files by Windows (PC) and Android (in Tablet) and both give errors.
Where am I going wrong?

Hello, MLRamos
I am from RJ and have a tablet Sony SGPT13 with the same problem, no wi-fi conection (only conects with a open wi-fi network)
I´ll tell you with i discover how to fix this issue.
see ya!

I believe that today, all links to the ROMs are broken unfortunately. I even made a collection of them, and yet, none is "ok".
Intending to correct a problem with wifi, I ended up almost bricked my gadget: it on / off, accepts access to recovery screen, but is looped in the language of screens and following ... = (
I believe that the solution to it would be only through the ZIP file via SD Card ... thank any contribution of personal collections. Grateful.

Related

ProgrammeA connection failure :o(

Hi,
I have updated my O2 XDA ROM ver 3.something to 4.00.16 T-Mobile(withProgrammA) and sence then I am unable to update it anymore. The Active sync is working fine with the USB connection, but the ProgrammeA is saying: error getting connnectiontype. I have try it on 2 different computers under w2k and wxp, the problem was the same.
I would like to upgrade it cos is frosing dayly, and the xda-developers ROM was better )))
Thanks, all the best
Have you tried going back to your original rom, then going from there?
Hi,
The ProgrammeA thus't connect a cannot update the ROM how can I go back to the original ROM ?
I know about bootable SDCard but I would prefer not to use it, so I check up for other possibilities :?
flare
Active Sync problem?
Hi Flare,
I don't know if this will be the case for you but have observed connection issues between updates with ActiveSync ver 4.71. I found that I needed to TOTALLY remove, not upgrade / downgrade ActiveSync then re-install the original from your CD [probably ver 4.5]
If you don't have it you need to try and get it, because while it provides other problems of its own in connection messages it appears more robust in file transfer.
If you cannot adequately remove AS 4.71 then you need to delete the folder under program files and start again.
Hope this helps,
Cheers,
David
According to the notes on the ROM Kitchen, you can't update from 4.00.10 or 4.00.16 using Programme A. What you can do, however, is cook an .nb1 file and put it onto an SD Card and use the bootloader. Of course this will require a 32 MB SD card and an appropriate USB or PC Card reader to get the new ROM onto the SD card.

Tivizen "ICube" patch to/for Tivizen "Elgato" ?

Info:
Normaly Tivizen (a DVB-T Tuner for iOS Devices) works NOT with Android Devices.
But "iCube" produce the same Device ..... BUT with a own Firmware
In Android Markt / Google play is a App available which run ONLY with "iCube" Devices.
Info: Tablet Version --- Handy Version
WHICH Super Freak / Hacker patch the "iCube" Tablet Version --- Handy Version to run on Elgato Tivizen Devices ?????
10000000000 THX
Nobody ?
I thought this would be first class Hacker's .... I was wrong?
Very, very sad. Had soooooo hoped.
You have a pm!
I would also like to know how this works?!
Sorry do not understand ....
How can I get the *.apk to send it to a Hacker ???
I download AND install DIRECT from Market ... I have NO *.apk File. It is DIRECT install from Market .
After install "Root Explorer" i have found the *.apk, so I can send it to you.
File is 17 MB
But I have no FileSharing ....
WHICH Hacker want to look into the *.apk to patch it for my 10.1N ??
Hello, ...... ???
Hi
I have got a tivizen wi-fi and it works perfectly with my italian nobrand samsung gs 2 with polish android 4.0.3 using the icube program found on the market (blue icon).
It works even on my asus trasformer 3G with official ICS using the program on the market (orange icon).
... be happy.
Same problem
Can u please help me with the same problem?
elgato tivizen
has anyone had any luck with this yet?
This is a little confusing but am i right in thinking that its only the "Elgato Tivizen" that will not work with android and other makes of tivizen work fine like "icube" and "humax"
so is it just a firmware difference as they look identical and are both called tivizen but made by different companys, i'm guessing this is the case,
and i bet they are all made in the same factory
so by installing Icube firmware on my on elgato tivizen should in theory do the trick
anyone have any thoughts on this or have solved this problem i would love to know
laters
James
I have buy the Tivizen Nano (Samsung Edition) and it work fine on my Samsung S2 and with the patched Tivizen Samsung-Phone App it work also on my Huawei Mediapad.
But it doenst work on my Sony Tab S I have download the Tivizen Tab App from Market but it found no device. After a lot of Google i found a tip to change the entry "tivizentv" in "tivizenSS" in"arrays.xml".
Now after starting the App i can saw the Device "TivizenSS12345" but after i press OK an error occurs and said "no device found".
I think there a something more to patch in the App but iam an absolutly noob. So i have the big hope that someone can help me to run it on my Sony Tab.
I will donate to them who help me to run the App!!!
I've got my Tivizen from elgato working since today. The changes I made were from 2 weeks ago and then I could connect but there was an error that the device should be turned on. Didn't found out why it' is working now...
What I did.
I copied the tivizen apk from icube to my pc. I opened the apk and in the folder \res\raw there is firmware file. I copied this file to c:\programs files\terratec\terratec home cinema\drivers. With the terratec software I updated the firmware -> still not working.
I decompiled the apk and with a hexeditor i changed all tivizentv to tivezen in classes.dex and recompiled and signed it -> still not working. then I got the error that the device should be turned on.
Till today I tried it again during a dull moment on my holiday and it worked. I could select a country and scan for channels. The country where I'm now isn't supported so I couldn't test it completly. I'm not used to doing stuff like this so if somebody wants to try the apk I made or want to look further on it...
moribundus said:
I've got my Tivizen from elgato working since today. The changes I made were from 2 weeks ago and then I could connect but there was an error that the device should be turned on. Didn't found out why it' is working now...
What I did.
I copied the tivizen apk from icube to my pc. I opened the apk and in the folder \res\raw there is firmware file. I copied this file to c:\programs files\terratec\terratec home cinema\drivers. With the terratec software I updated the firmware -> still not working.
I decompiled the apk and with a hexeditor i changed all tivizentv to tivezen in classes.dex and recompiled and signed it -> still not working. then I got the error that the device should be turned on.
Till today I tried it again during a dull moment on my holiday and it worked. I could select a country and scan for channels. The country where I'm now isn't supported so I couldn't test it completly. I'm not used to doing stuff like this so if somebody wants to try the apk I made or want to look further on it...
Click to expand...
Click to collapse
Good work !!:good:
i'd like to try your apk
hi,
i found out tivizen works just fine, when my 7.7 runs with ics 4.0.3 (or .4 ?), while on 3.2 it doesn't. it kinda runs, when i modify the tivizentv to tivizen, but then it would start up, show the tivizen in device selector and then quit, saying that it doesn't find the device it showed before. also on the market i get different versions of the tivizen software. on 4.0.3 it's the one with the black tivizen icon, while in 3.2 it get the selection of the 3 orange programs.
no one found a way to run tivizen under honeycomb ?
;(

[Q] EngelDroid EN1007M

I'd bought this WE a little box from Engel Axil with Android 2.3.
This box is powered by an ARM CORTEX (armv7) processor with 512Mo of RAM and 2Go stockage.
More info HERE.
I'd installed openssh and I can see the return of 'uname -a':
Code:
Linux localhost 2.6.34 V1.3.0-70-gee2481e(20120217.100957) armv7l GNU/Linux
A spanish community seem to have succeed to make a ICS release for it HERE, but they don't say anything about the procedure to install this.
Is there somebody here which will be able to explain me how to upgrade my Engeldroid ?
With 'busybox installer' and ssh terminal, I am able to get root access.
Now I try to set the default home launcher to something else than original spanish launcher....
I'm interested in this too!
The EngelDroid 1007M looks just like what I need, but I don't like that its software is in spanish.
maisondouf said:
Is there somebody here which will be able to explain me how to upgrade my Engeldroid ?
Click to expand...
Click to collapse
Hello Guys,
I'm living in Spain myself and bought me one of these nifty boxes as well and started to fizzle around with it.
Here are my findings with it so far:
Android:
The box comes standard with Android 2.4.3 (or was it 2.3.4, I'm at work right now and can't remember correctly ) but can be upgraded to a 4.0.3 version that is made by Mygica.es.
The link to download the upgrade is indeed the link you've posted.
To install this upgrade you will need to download the zipfile, rename it to update.img and copy it to a clean SD Card.
Make sure that the Engeldroid is powered off and put the SD Card in the Engeldroid.
Than take something pointy and press and hold the reset button on the back (the smal little hole) and plug in the power connection to boot the Engeldroid in update mode. You can release the reset button when you see the restore-android-logo appearing on the screen.
The droid will now look for the update.img on the SD Card and start updating your box. There will be a random offset message but that is nothing to worry about and does not give any problems with the installation.
The first time after installing this new Android version the unit will take up to 15 minutes to boot it due to installing all settings and default apps from this custom rom.
The normal remote control with the keyboard on the back won't work anymore, but the motion controller will. It is highly advisable to connect a wireless keyboard and/or mouse or combination. Myself, I'm using a Logitech K400 keyboard/touchpad combination which works flawless.
Another option for the Media Center tweakers would be to install Linux with XBMC on this.
It is nowhere comfirmed but that is how I am using my Engeldroid at the moment and it turned my droid box into a proper XBMC media center and Samba file server that shares all my movies from the connected disc on the network as well.
The install procedure is the almost the same as with the other ROMS, download, unpack the zipfile, make sure the file is called update.img, copy to the root of the SD Card, plug it in and reset the droid with the reset button hold.
The link for the specific build of XBMC Linux that is working with our droid I can't post here yet, but search on google for: Pivos XBMC-Linux Beta 100912 and you will find the Pivos forums with the release topic of this ROM.
Don't try the Android ROM from Pivos, it is not compatible with the Engeldroid EN1007M. No worries if you want to try it, it won't blow up our box but just won't install.
If you have any more specific questions, please ask or send me a message or email and I will get in touch with you.
Official update
There is an official update for this device to ICS 4 (site in spanish though)
engeldroid . com
Got to "Nueva ROM Android 4 ICS" --> "ROM Android 4 ICS" (I'd link it but I don't have 10 posts yet )

Can i edit the wifi section of an *.img with Dragonface??

Hi.. I have been trying to fix a tv stick for a few months now (basically is more about the knowledge i am getting - I am not desperate in fixing it). It is a strange piece, probably clone that i have been tricked in buying. It has an Allwinner A20 dual core cpu with an AP6210 wifi module...
Tried to flash another firmware ti improve it, ended up with the wifi problem. Wifi (and bleutooth) will not start. When i press the button, it just slides back to off... I have read and tried anything i could find on the internet. I have also tried tens of firmwares, but the wifi problem persisted (the original firmware is nowhere to be found).. To cut the story short, the device will not connect to a computer through ADB (it just doesn't seem to support this function - is not a matter of drivers). So everything i have been trying did not include this option...Also the recovery can not be changed to support backup and restore from custom recoveries (i.e CWM, or TWRP)..
What i did manage was to extract a backup from the rom, of another identical device, with the Nandroid App (online version, not through the recovery). Then i used the Dragonface program to edit another similar firmware (MK808C). While loaded, i open the FSOP folder which is the folder that dragonface collapses the loaded firmware for editing and then, i replaced the existing system folder with the one i had backed up trough the Nandroid procedure... Then hit the save button of the Dragonface...
I flashed the new *.img to my tv stick with the phoenix tool, and the tv stick booted normally, looking EXACTLY the same as when i first bought it. I even managed to get the bleutooth going this time, BUT, the bloody wifi still refuses to come on :-/
I must tell you, I know my way through some computer technical stuff but I am not an expert into the coding level and i haven't had the experience of Linux systems (thus i don't really understand coding). I really thought all settings and drivers are included in the system file and copying the original system file into another firmware, would do the trick.. but i guess is not that simple... The thing is that, the way i see it, the problem is probably hidden at the booting level... hitting the system configuration in the advance settings of the Dragon face, will open some coding thing which i don't understand.. but i do see the AP6210 module in that coding, which means that the new firmware includes those drivers..If anybody have any idea or can point me to the right direction I would really appreciate it.. Thanks
I have the same problem with AP6210 on H3 Allwinner STB box. After firmware ugrade from Android 4.4.2 to Android 10 Wifi just don't work, button slides back to off. Drivers are present. Have both firware files unpacked.
Please help! What i have to do? Sys_config? Init.rc?

Lenovo Yoga 10HD+ B8080-H/F 3G&Wifi/Return to Stock JB 4.3/

Hey guys i just wanna share how i solved my lenovo yoga problem with broken partition after rooting the tablet,i haved troubles with installing apps and use them,tablet its just goes reboot and its continues about 10 or more restarts,so fixed this when i returned to stock i searched here on xda i dont finded any stuff about this and i decided to share
First memory card is required if you dont have it will not work! So get memory card at least 4GB.
INSTRUCTIONS
-----------------------
1.Boot into Android normally.
2.Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
3.Unzip the downloaded archive.
4.Copy "sdfuse" folder from archive to SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
:cyclops: SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated. You will have Jelly Bean 4.3 :highfive:
When it boots go to contacts type on new cotact name this code ####6020# then select your region! You must do this to get new update to KitKat,if you not it will show you that you dont have updates.
Sorry for my BAD english! :silly:
EUROPE VERSION with 3G ! Download Stock ROM for 3G version! /MEGA/ 860Mb:good:
I think for the Wi-Fi version it will be the same way so here is the link for Wi-fi
Download Stock ROM for Wifi version /Yandex/ 805Mb
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
yipeeyiho said:
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
Click to expand...
Click to collapse
This is for all version i think.
When it boots go to contacts type on new cotact name this code ####6020# then select your region! I think that will do the job when you select your region
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
when I type ####6020#, it says: Attention Error! Do not have easyimage.zip
[email protected] said:
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
Click to expand...
Click to collapse

Categories

Resources