Hi,
I have updated my O2 XDA ROM ver 3.something to 4.00.16 T-Mobile(withProgrammA) and sence then I am unable to update it anymore. The Active sync is working fine with the USB connection, but the ProgrammeA is saying: error getting connnectiontype. I have try it on 2 different computers under w2k and wxp, the problem was the same.
I would like to upgrade it cos is frosing dayly, and the xda-developers ROM was better )))
Thanks, all the best
Have you tried going back to your original rom, then going from there?
Hi,
The ProgrammeA thus't connect a cannot update the ROM how can I go back to the original ROM ?
I know about bootable SDCard but I would prefer not to use it, so I check up for other possibilities :?
flare
Active Sync problem?
Hi Flare,
I don't know if this will be the case for you but have observed connection issues between updates with ActiveSync ver 4.71. I found that I needed to TOTALLY remove, not upgrade / downgrade ActiveSync then re-install the original from your CD [probably ver 4.5]
If you don't have it you need to try and get it, because while it provides other problems of its own in connection messages it appears more robust in file transfer.
If you cannot adequately remove AS 4.71 then you need to delete the folder under program files and start again.
Hope this helps,
Cheers,
David
According to the notes on the ROM Kitchen, you can't update from 4.00.10 or 4.00.16 using Programme A. What you can do, however, is cook an .nb1 file and put it onto an SD Card and use the bootloader. Of course this will require a 32 MB SD card and an appropriate USB or PC Card reader to get the new ROM onto the SD card.
Related
I acidently loaded the firmware for I-mate on to my XDA II and now all that comes up on the screen is HTC engineering mobility V0.23. I also can't get it to sink. What should i do?
This is a Demo phone i got for free so i cant send it back.
Thanks for any help
1. I can reassure you that you really did destroy your OS! :lol:
2. Try search at this site, this sort of topic has been being discussed since...
...I don't remember!
3. Have a glance at threads, discussing SD method of OS flashing + you'll need a ROM image file (for any kind of XDA2) and an SD card (>=64Mb).
Loading a new rom with an MMC or SD card
ok i went to www.romkitchen.de and created a rom for pocket pc 2002. So now all i need to do is load it on to my MMC card, put in into my XDA2 and reboot?
Pocket PC 2002 or Windows Mobile 2003 for a XDA2
Should i use Pocket PC 2002 or Windows Mobile 2003 for a XDA2?
Stop!!! The site you are looking at is cooking roms for the old XDA 1, it is not for XDA 2!
TY, i got a copy of some one elses OS, and im going to try to flash it with an SD card.
That didnt work, I dont think im putting it on the SD card right? Do i just copy it to the card or do i need to do somthing to the .nb1 file to make it a boot file?
Also my Bootloader is V0.23 kinda old.
Does any one know of a place i can send this to get it fixed in the US? This is a Demo phone i dont think i can send it back to O2.
Don't give it up yet.
1. XDA2 ROMs are marked 1.xx (1.60, 1.72...) - you need this ones.
2. How do you put it to the SD? You need OSimageTool or maybe other program to put it to the card in RAW format - not converted by active sync or so...
I tried using the OSimageTool to save the .nb1 into the .img but it tells me "don’t know how to write distinationfile". I was able to convert the .nb1 in to a .nbf but that’s it. Is there another conversion program out there?
Sorry i ment "destinationfile" all one word
xdatools are ONLY for xda1
if you want to mess with xda2 flashing
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Is there a way to make a boot disk out of an SD card if so how?
Mine is defiantly wiped if I try to run an update to 1.60 using HimaUpgradeUt.exe it show all my image versions as blank. When I hit upgrade it just hangs on the install screen that says "current software is now being erased from your pocket PC. This will take only a few minutes." The progress bar never advances from there, I've tried to reset and it’s the same thing over and over.
hi
I have downloaded the wm2003se from lumpinstefan and i could change the rom of my pocket pc to that version by using ActiveSync.
Now i downloaded another version of the rom and i tried to install it on my Qtek 1010 (Wallaby) and it in the black window on my computer appears:
"ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype"
When i press the next button in the setup it says " cannot execute the remote communication prgram. please make sure that USB/Serial is properly connected". and the setup shuts down.
i Need You to know that before the new rom i downloaded from lumpistefan i was using pocket pc 2002 on my pocket pc.
Now it's clear that there is some problems in the connection. i tried it on several computers but i faced the same problem. is there any setting on my pocket pc to change??
Please somebody helps me i really need to know how to solve the problem.
Regards, and thank you.
Try searching the forum.
It´s an old problem copncerning to some T-Mobile ROMs
You have to flash your device via SD-Card....
Try also some looking in the wiki. The process how to flash vi SD-Card is there described...
And please do not post multiple threads with the same topic....
http://forum.xda-developers.com/viewtopic.php?t=20733
Stefan
ROM Upgrade communication error
Yeah I am having the same problem after installing the T-Mobile ROM, the same communication error when I try and change the installed ROM Image.
I did think it was something wrong with ActiveSync or my laptop :twisted:
Has anyone got any hints on how to do this on a Wannaby? (Saves me getting the wrong idea whilst reading through reams of text).
Many Thanks
Yes i have upgradet my rom via sd card and it worked. it is easy....
Any way thanks so much buddies... tell me something, is there a place in this forum where i can download the windows mobile 2005 version?
2005
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
ROM Version
Ahh, I see from other threads, ROM Version 4.01.16 prohibits upgrade via EXE! Damn! Ive just checked and thats what I have installed!
The T-Mobile image I'm using at the moment is very slow and comes up with application errors occasionally :x
Re: 2005
amtrakuk said:
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
HTH
Stefan
Hmm doesnt work for me. I am selecting the browse button to select the nbf file from the image and in the second drop down box selecting the sd card. When I press copy it comes up with the error ITWriteSDCard: The media is write protected, error opening target device. The card isnt locked as I can read and write files to it using explorer. Whats going on?!?!
Growing frustration!!!
A
Some internal SD-Card Writer make problems. i Think you can use also the SD-Card-Slot in your devuce, or you have to get an external Writer...
Stefan
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
hi brothers, i upgraded my O2 XDA Atom last night--result fail. i didn't backup ROM on SD card, so i can't restore by using SD card and i can not find someone to fix it for me in my city. does anyone can upload the full SD Backup ROM for me? it would be great! thank you very much.
You're stuck in the bootloader after an ExtROM Flash Fail, right? Do you have the DSUU windows upgrade executable?
If you don't, download the latest Atom ROM upgrade from the O2 site, connect your device to the PC's USB (you'll see the message on the Atom's screen change to Connected), and run the upgrade (it will think you're trying to flash to an empty device with ROM version 0 - let it). IIRC you do NOT need to use an SD card ROM for this process.
To ensure success, be sure you have removed the SIM card from your device first - and it usually takes one or two tries before the extrom format command goes through successfully (*glares at Quanta*). As long as what failed is only your ExtRom you should be able to salvage your device.
Thanks brother, i will try it.
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.