hi
I have downloaded the wm2003se from lumpinstefan and i could change the rom of my pocket pc to that version by using ActiveSync.
Now i downloaded another version of the rom and i tried to install it on my Qtek 1010 (Wallaby) and it in the black window on my computer appears:
"ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype"
When i press the next button in the setup it says " cannot execute the remote communication prgram. please make sure that USB/Serial is properly connected". and the setup shuts down.
i Need You to know that before the new rom i downloaded from lumpistefan i was using pocket pc 2002 on my pocket pc.
Now it's clear that there is some problems in the connection. i tried it on several computers but i faced the same problem. is there any setting on my pocket pc to change??
Please somebody helps me i really need to know how to solve the problem.
Regards, and thank you.
Try searching the forum.
It´s an old problem copncerning to some T-Mobile ROMs
You have to flash your device via SD-Card....
Try also some looking in the wiki. The process how to flash vi SD-Card is there described...
And please do not post multiple threads with the same topic....
http://forum.xda-developers.com/viewtopic.php?t=20733
Stefan
ROM Upgrade communication error
Yeah I am having the same problem after installing the T-Mobile ROM, the same communication error when I try and change the installed ROM Image.
I did think it was something wrong with ActiveSync or my laptop :twisted:
Has anyone got any hints on how to do this on a Wannaby? (Saves me getting the wrong idea whilst reading through reams of text).
Many Thanks
Yes i have upgradet my rom via sd card and it worked. it is easy....
Any way thanks so much buddies... tell me something, is there a place in this forum where i can download the windows mobile 2005 version?
2005
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
ROM Version
Ahh, I see from other threads, ROM Version 4.01.16 prohibits upgrade via EXE! Damn! Ive just checked and thats what I have installed!
The T-Mobile image I'm using at the moment is very slow and comes up with application errors occasionally :x
Re: 2005
amtrakuk said:
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
HTH
Stefan
Hmm doesnt work for me. I am selecting the browse button to select the nbf file from the image and in the second drop down box selecting the sd card. When I press copy it comes up with the error ITWriteSDCard: The media is write protected, error opening target device. The card isnt locked as I can read and write files to it using explorer. Whats going on?!?!
Growing frustration!!!
A
Some internal SD-Card Writer make problems. i Think you can use also the SD-Card-Slot in your devuce, or you have to get an external Writer...
Stefan
Related
:evil:
Hi guys,
I need some serious help here. Today I tried to upgrade my MDA II with the latest 1.60 ROM. Somehow during the upgrade something went wrong and my computer frooze and needed a reset. This was in the beginning 10 minutes of the ROM upgrade and my the screen of my PPC went off. After the reboot of my workstation I could not get my MDA II to connect to my workstation. The MDA is completely useless now. The only thing I have on the screen is:
Serial (or USB) on top of the screen (with no backlight) and at the bottem of the screen Version 1.01.
I can't soft reset of hard reset. I took the battery out and waited for almost 30 minutes but I still can't turn the thing on nor can I soft or hard reset. I can't thing of anything else that I can do and I just sold my Loox yesterday so now I'm lost!
Anybody with a good suggestion??
Please help.
Regards,
Wouter
The Netherlands
I think it's a way to use a SD-card with a Rom on it.
Looks like Your bootloader is still working and can reflash a rom to Your device.
Now You have to find somone with an 64MB SD-card to put a rom on it and reflash Your device.
With best regards
Jens
Hi Jens,
I think my bootloader is not working anymore. I tried to do a hard reset a dozen times but the bootloader menu doesn't come up. But thanks for suggesting though.
Wouter
Hi wouterk,
I don't know if this would be of any help, but you've got nothing to lose now.
I've got a similar error that the RUU program asked me to remove my XDA II from the cradle and right after that, the XDA II screen freeze at "Seria 1.01", same as yours.
So I put my XDA II back to the cradle and from my PC, I clicked Control Panel > System > Device Manager > and here my XDA II was recognized as an unknown device, so I updated the MS USB Sync driver.
After the driver update, I rerun the RUU and the ROM upgrade went fine. Now I have my XDA II back alive and kickin' with the new MDA ROM. At least this works for mine and hope it would also work for yours as well.
HTH.
Hi Joparp,
Of course I gave your suggestion a try. But too bad it didn't work for me like that :? . I remebered that when my workstation crashed, after the reboot it found a new USB device (my cradle?) but I couldn't get your sollution to work for me. But I still have hopes. Tomorrow evening I'll meet a guy who can fix my problem (keep my fingers crossed....). So I feel reasonable relaxed now.
It is nice to see that so many people responded to my problem. I posted my problem on three different sites and many people responded. That was a nice feeling! I keep this thread posted about the result of tomorrow.
B.t.w did you install the 1.60 ROM eventually?
Wouter
Hello wouterk
well, i'm sorry about this and i guess the safest way to do ROM update thru SD Card.
i do agree with jenson suggestion and i can't see any other way to resolve this problem which i hope will work here are the steps as follows :-
ask any one who has MDA II device, 64MB SD Card and SD Card reader to backup his/her ROM and Post it for you somewhere where you can download it and write it to SD Card.
ofcourse he/she if using Windows will need serial cable and hyper terminal software which normally can be fount under start/programs/Accessories/Communication otherwise download from http://www.hilgraeve.com/htpe/index.html
get the device into Bootloader Mode ( power button+any direction+reset )
Connected via Serial cable and use these setting 115200 baud, 8n1, direct to com1 port or maybe com2 it depends on which port they use
type d2s command to backup ROM to SD Card which i recommend 64MB SD card formatted and when done you will see something look like this
D:Waiting for card insert.........
SDetected one card
SD:ready for transfer OK
Total card size=3D40000ze=0
SDCARDD2S+,cStoragePlatformType=FF
********************************************************************************
***********************************************
Store image to SD/MMC card successful.
SER>
then reset the device and get SD card reader and insert this card into the reader and use ntrw image reading and writing tool
if you don't have it you can download it from here http://www.tamiminet.com/othman/ntrw.exe
from the command line run ntrw read MDAII.nb1 E:
This assumes your SD card reader has drive letter E:
now you will have new file which is MDAII.nb1 it's about the size of the SD card zip it and post it somewhere so he/she can Download it and unzip it then write it back to SD Card using this command b]ntrw write MDAII.nb1 E:[/b]
again this assumes your SD card reader has drive letter E:
when done go into bootloader mode ( power button+reset ) with SD card inserted, hit camera button and flash your device with rom which is on SD Card
if you don't have serial cable you still can do it using Linux with cardle and thanks for bio and few other cool guys who mentioned this hints on other thread
put your device in bootloader mode
connect via cradle
use any terminal (minicom) to connect to the used port (/dev/ttyUSB0)
- you should see something like 'USB>' or 'SER>'
put an SD Card into device
type d2s on command prompt
wait untill you see Store image to SD/MMC card successful
i don't think this will include the Applications on the Extended ROM but no problem this can be done later.
i hope this could help to get back you device to life.
best regards and good luck.
Othman
Riyadh, Saudi Arabia
It is working again!
:lol:
Hi guys,
Thanks to Akira my MDA II is working again. Everything is working again exept for the bluetooth communication with my Emtac bluetooth GPS. That problem still remains in my case. I even did another hard reset but still the same problem. I then put the Towa fix again on it and now I can use my GPS again.
So thank you all guys!
Wouter
i have a O2 XDA II . it came loaded with 1.66WWE. i wanted to put 1.60. i downloaded it from sourceo2.com
then double clicked the installable. it started the downgrade . it said it will take 30mins & started deleted the rom image.. i then went for lunch & came back in 15mins.. the phones now totally dead.
If i dock it , the screen says USB V1.06
if i remove it the screen says Serial V1.06. I cant hard rest it nor can i soft reset it. i huess cause there no rom image in it.
What do i do.. please help with as many links software as one can..
Please...
ive got 1.72, but when i try that. it says country error.??
can that be resolved.. i dont mind loading 1.72.
the good news is that it seems you still have the boot loader working ... use ER2003 tool to modify the country code of the 1.72 ROM file ... or you can use the xda2nbftool.exe if you like the command line mode
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
hyper said:
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
Click to expand...
Click to collapse
Unpack the .exe file with winrar/winzip. And you're good to go.
Edit this file: ms_.nbf
managed to unpack it... now when i try to load 1.60 it says model id error & if i try to load 1.72 it says country id error.
what do i change in the ms_.nbf file ????
do i only change this file fields or all three??
i even removed the battery & checked the model ID. on my phone it says PH10B
i changed all the three files to PH10B ..
Now i get Connection Error.....
Now what???
now the error is ERROR 101... connection error.
(i'm loading 1.60)
also is it possible for me to do it via my emory card (i have a MMC32MB & 128MB)
if so, what file do i need to copy & then whats the procedure??
i got 1.03.00 rom on mine. my xda 2 is 2 days old now dunno wht rom to load it up with now. whts the best & safe rom now. i have no apps or nething to back up so its oki. the phone was bought from u.k. and was locked on O2 network. now its unlocked and being used in India. plz advise wht ROM to d/n and use. if possible the d/n link as well. thx
Question?
Why do you want to downgrade your phone? :shock:
For upgrade to 1.72:
1. Download i-mate 1.72 update and xda2nbftool
2. unpack that update to any directory on your harddrive
3. download script from this post to created directory (unpack it too)
4. copy xda2nbftool.exe to that directory
5. run provided script
6. insert XDA2 to cradle and then HimaUpgradeUt.exe
You will i-mate splash screen from i-mate though, but working device.
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
i wonder... most O2 XDA II come with 1.6 rom version. mine came with 1.66. could that mean its not O2 even though its written O2 on my phone? could it mean its T-Mobile or something??
can someone post a link or software that i need to put onto my MMC card & then use that to install the rom from the card inserted in the phone??
hyper said:
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
Click to expand...
Click to collapse
So, what's that problem? Can you run it?
Try to run it in command prompt... And if it writes any error, post it here...
Can you access the file system of your XDA2 from ActiveSync -> Explore?
now i managed to get the problem of Country error out of the way , but now im getting the ERROR 101 - Connection Error.
no i cannot browse any files & my active sync does not show connected.
what files do i need to copy paste onto my MMC card so that i can flash it by executing the files with the camera button & the MMC Card inserted??
im dowloading the NTRW & 1.72 NK.nb1 file. do i just copy & paste it on the mmc card & then instert the card into the phone & then press the camera button.. should this do the trick??
this is all that i have tried so far... yet no luck.
my phones originally from malaysia , its an O2 XDA II
i have the following rom with me. my bootloader is V1.06
1. RUU172800WWE_CDL_SKU1
2. XDA_IIupgrade_v16050
3. RUU172104wwe-t-mobile-uk
1. i removed the battery , dcoked the phone, connected the charger to the docking bay at the back...the red light on the phone lights up.... the bootloader screen shows up ina slightly distorted manner.
i then ran all the three roms as it is..without editing anthing. The error i get in all the three times is ERROR 101. CONNECTION ERROR. it tells me to check is usb is connected, charger is connected usb port is conencted & the phone is on. .......... everythings connected but obviously phone can only be in bootloader mode.
2. i put the battery back in dock the phone, the charger is yet connected to the back of the docking bay. .. i try all three installations withour extracting or editing as they are exe files..... now, all the three times i get COUNTRY ID ERROR OR MODEL ID ERROR.
3. when i edit the ones that give me model id error then i get CONNECTION ERROR AGAIN. (this is again with the battery in & charger plugged in)
i downloaded the NTRW & 1.72 NK.nb1 file. but the one that is available on this forum is corrupted. so i cannot extract it.
NTRW ive downloaded seperately. i need the nb1 file now. can someone post a working, no-corrupted image rom image file?
once i get the correct Rom.nb1 file... all i have to do it copy & paste the correct rom.nb1 & ntrw.exe file onto my MMC card & keep the battery in the phone & insert the MMC card & press the Camera button .... is that correct? i'm guessing that this will run the ntrw exe file & load (dump) the Rom.nb1 file onto the phone. is that correct?
please do let me know what else i can try & dowload a newer RUU or something. i think the best way is to SD flash the phone.
i dont even mind flashing it to a PPC2002 version & then upgrading it from there. if thats possible.
As far as the connection between the USB Docking Bay is concerned,...everytim i connect or disconnect the phone, i hear the familiar XP "TING" which shows that some USB thing is connected, but my active sync does not show that the phones connected, i guess that cause it got no rom in it.
Also when i edit the ms_ / NK / Rom files er2003 i get an error everytime i start the software, but i just press IGNORE & continue. i always get ROM successfully written & then the error pops up again but i keep pressing ignore. this works... but whats up with the CONNECTION ERROR. IF ITS NOT CONNECTING TO THE PHONE, HOW DOES IT KNOW THAT THE MODEL ID OR COUNTRY ID WRONG ???
Ok.
If any ROM update can detect your device (as we can see error messages COUNTRY ID ERROR or MODEL ID ERROR), there is hope, you can update your device.
If it's 1.72 ROM (that writes COUNTRY ID ERROR or MODEL ID ERROR), use the solution I send you few posts ago (unpacking, running batch script etc.)
When you updating, keep battery in your device and charger of device connected to cradle! Don't remove anything.
BTW: Don't use RUU172800WWE_CDL_SKU1 update, it just update only part of your device (ExtROM)!
BTW2: Read this: http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
thanks againa beecher. the problem is that once i use the patch & then run it. it does not show me the country id or model id error (for which i thank you) but then it says error connecting.
i have a USB to serial connector. should i try serial connection?? or maybe try it on another computer.
can anyone please tell me how do to a SD flash step by step with the Rom.nb1 file attachment of link.
I've been trying for several weeks now to unlock my XDA1 Wallaby without success. Some members have tried to help but no joy. In trying to load the Special Edition ROM I get the Error 011 message per the attached screen grab. Can anyone tell me why this is occurring and what the solution is? My current device ROM is version 4.01.16ENG, Radio Version 6.25.02, Protocol version 32e4.
Any help with this frustrating issue would be much appreciated. Willing to make a phone call if you can help. Thanks.
It´s a very easy solution.
Your installed ROM prohibits flashing via Exe....
Extract the special Edition ROM with winzip or anything else. You got an folder called English. In this folder is a file NK.nbf with about 32 MB. This File you will need for flashing via SD-Card.
Instructions how to flash via SD could be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
are complete instructions what you have to to to unlock your device.
Step 6 is not a must. If you get an error Message you should be able to process without downgrading the bootloader....
Stefan
Stefan,
Thanks for your response. I followed the instructions you pointed me to but they are a little unclear. I first copied the ROM image to my SD Card while in my device (I later assumed the instructions meant to write the ROM image to the SD Card via a card reader, which I don't have).
After downloading to the SD Card in my device I held the power button and soft reset which displayed on screen the message:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
However, nothing happens in touching ACTION on the screen to download. What do I do?
Thanks, David
Don´t know, what you are meaning with "touching ACTION" put you have to press the center of the navigation button on your device to start installation.....
Using the XDA-SD-Slot is also ok. You just have problems if anythhing went wrong, and you don´t have access to this slot any more....
Stefan
Stefan,
Thanks for your reply. I've sent a response to your personal email address.
David
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.