Lost to Webhole 2.0 - Android Q&A, Help & Troubleshooting

K1 Ideapad Lenovo - Khanning ROMS
I did something stupid. I made an assumption that things were as I remember them... It's been years since installing multiple partitions with different OS on a machine and I've forgotten almost everything I know and times have changed.
I purchased a used K1 with honeycomb and had hoped to install ICS with google play services/store. Simply wanted a device to surf and play a few games.
Installed ICS, flashing it without problem and thinking I would simply install GPS afterwards... that didn't happen.
After some research found that khanning88 had made a ROM ready to go. Thinking the end result was within my grasp, low and behold the ROM is no longer available and I have searched relentlessly for almost a week now, torrent sites, Russian forums, anywhere to try and find the ROM. I'm thinking it may no longer be out there and I am back to square one.
http://forum.xda-developers.com/show....php?t=1564002
I'm not sure where to proceed, if someone would know of a repository where this file might be found or should I start learning how to integrate GPS into my own ROM similar to what Khanning88 had already accomplished.
Thank you,
~ Kip

Related

[Q] All I want to do is go back to stock rom :(

I did one flash...to TNT version 4xx, and I loved it...but I'm finding I'm getting lots of Google Framework errors and generally just kind of want to start from scratch, over again.....go back to the latest version of the official viewsonic roms.
Sadly I didn't use clockwork or anything so I think my original files are history
I know there are lots of threads, and I tried to follow one about snagging a rom and moving it to the Root and all it does is re-install TNT I think I am "not getting something".
Can someone walk me through this....
The force closes can be fixed by re-partitioning your sd card. Part 1 Step 7 in this tutorial:
http://forum.xda-developers.com/showthread.php?t=865245
But partitioning will erase everything, and is usually done after installing cwm and before flashing a rom.
You really don't want to go back to stock, especially if it's only to gain stability. All the force closes will go away when the tablet is properly formatted.
If your looking to go back to stock, I like nvflash, but there are easier ways.
http://forum.xda-developers.com/showthread.php?t=861950
Force closing is a known issue that can be easily fixed by repartitioning your internal sd card to the right specs. It has nothing to do with your newly flashed rom.
What you need to do is back up all your data on the sdcard and then go into clockworkmod advance and repartition to 2048/0.
Added by edit.
To be honest, your original post tells me the gtab isn't for you. I say a mainstream device like the ipad is more for you. Here is why. In order to use the gtab, you need to do the following things.
(1) Install clockworkmod.
(2) Use clockworkmod to repartition to fix the force closing issue.
(3) Use clockworkmod to flash a new rom.
And you're done. The entire process takes about 10 minutes at most.
Again, steps 1-3 should take you 10 minutes at most and the device is ready for use. If you find yourself frustrated by one of these steps or that you're spending more than 20 minutes, then the gtab is not for you and you need to get a mainstream device.
goodintentions said:
Again, steps 1-3 should take you 10 minutes at most and the device is ready for use. If you find yourself frustrated by one of these steps or that you're spending more than 20 minutes, then the gtab is not for you and you need to get a mainstream device.
Click to expand...
Click to collapse
This recommendation is of course assuming you have no determination whatsoever, and are incapable of learning anything new.
brettdwagner said:
This recommendation is of course assuming you have no determination whatsoever, and are incapable of learning anything new.
Click to expand...
Click to collapse
Look, for most people this device is a toy. I use it at work, and I suspect most people don't do this. Let's admit it. Modding a device isn't for everybody.
I went into modding the gtab as a total android newbie. And yet it took me all of 15 minutes to figure out how to install clockworkmod, repartition, and flash a custom rom. Then a week after I flashed a custom kernel.
You just can't ask everybody to go through the headache of modding a device if they have neither the will nor the time.
I said 15 minutes because that was my first time ever modding an android device. After that first time, it took me about 5 minutes to do my second device.
It's a simple process to go through. If a person gets stuck on any of those 3 steps, then I think it's best that they get a mainstream device. The gtab just isn't for everybody.
HeadRusch1,
I think you can handle modding the gTab. If you understand how a file system works, can extract a zip, and have already flashed a custom ROM then your about 90% of the way to a smooth running gTab. As mentioned above, you simply missed one step.
I understand the "10 minutes or forget it" argument, however I think it's wildly inaccurate when gauging a new user's potential competency with the gTab. If you find yourself frustrated then go read some more, search for a solution, or ask a question. It should take a long time to get comfortable modifying Android devices, there are tons of loosely documented best practices, but don't bail early because it's hard.
PS.
This assumes your looking for a device to tinker with. Goodintentions is right for users who are looking for iPad equivalent. I just assume that users looking for a cheap iPad rarely make it as far as XDA. And if they have, then it's a good opportunity to encourage further exploration.
The reason I gave the 20 minutes advice is because I've seen too many people buying the gtab thinking they got an ipad. The gtab isn't mainstream at all even though it's outsold a lot of the mainstream devices out there (ahem xoom) by several orders of magnitude. Customer support for the gtab is almost non-existent. And don't hold your breath for updates from viewsonic.
I absolutely love my gtab. I am currently running vegan ginger OC to 1.2ghz. The speed on my gtab is absolutely stunning. There's no jerking at all. My touchscreen is incredibly sensitive. Viewing angle has never bothered me. I love the full size usb where I can just put a memory stick in there just like my laptop. The autocad app is extremely helpful for me. In fact, it's been a whole week since I turned on my laptop.
That said, again, this device is not mainstream. Meaning it's not for most people. I am absolutely convinced that most people would be better off with something like the ipad or transformer.
Based on my experience, there are two types of people in the world of gadgets. (1) Those who sees a problem and see the end of the world and (2) those who sees a problem and try to get around it.
An example of #1 is my friend Sarah. She wanted to use my gtab to get a feel for it. She said the touchscreen bothered her and that she was more comfortable with a laptop touchpad more. And then she said "I don't know, I think I'll be better off with an ipad." LOL. Boy is she going to be so surprised to find out the ipad also uses the touchscreen rather than an touchpad.
Anyway, another example is one of my colleagues. After I told him the autocad app doesn't work with 3-D view yet, he acted like it was the end of the world. Me, I just use the side, top, and front views in my demos. Works just fine for me.
Anyway, I'm rambling now. The point is my experiences tell me most people are better off with something like an ipad or transformer. Since those devices are mainstream, people can't say "of course you can't do this, you can't do that". With the gtab, since it is not mainstream, the smallest inconvenience means the end of the world.
HeadRusch1 said:
I did one flash...to TNT version 4xx, and I loved it...but I'm finding I'm getting lots of Google Framework errors and generally just kind of want to start from scratch, over again.....go back to the latest version of the official viewsonic roms.
Sadly I didn't use clockwork or anything so I think my original files are history
I know there are lots of threads, and I tried to follow one about snagging a rom and moving it to the Root and all it does is re-install TNT I think I am "not getting something".
Can someone walk me through this....
Click to expand...
Click to collapse
Plug the gtablet into the computer.
Mount it for file transfer when prompted.
Check for an "update.zip" file at the root of the SD card (That's the tablet's 16gb internal memory). Delete it using your computer. That was causing TNT to be reloaded.
Here's the link to the original 3588 version they shipped with: http://tapntap.http.internapcdn.net/tapntap/viewsonic/update-smb_a1002-3588-user.zip Save it to your computer. Rename it "update.zip". Copy it to the root of the gtablet SD. Shut off the tablet. Unplug the USB cord. Restart with power & vol +
It should update.
If anyone notices a mistake, feel free to correct me. I've only flashed from stock 3588 to Vegan Ginger. So a whole 1x.
For what its worth, I tinkered and now I'm good.
Got NVFLASH working, went back to stock. Then went to Clockwork, then went to Vegan 5.1.1, then to CM7, now back to Vegan. I've found some apps that work and I'm liking it more. For the record, I own an Ipad2 as well.
Now, to those who chose to comment: You guys need to understand that many of those links are drowning in "extra information", and that is fine if you don't mind clicking hyperlink to hyperlink to do some trial and error, but now with multiple install path choices and whatnot, it gets confusing and it also means you have some time. I asked for someone, possibly someone in my shoes who has been down the path, to walk me through the steps.
Some of you did, some of you projected some assumptions with the underlying message of "RTFM".
This, too, was my first dip into the Android pool. Thanks for the help.
HeadRusch1 said:
I'm getting lots of Google Framework errors and generally just kind of want to start from scratch, over again.....go back to the latest version of the official viewsonic roms.
Sadly I didn't use clockwork or anything...
Click to expand...
Click to collapse
I had that issue and didn't have clockwork.
Solution:
1: install clockwork
2: boot into clockwork, and select 'fix permissions'.
3: reboot, tablet fixed

[Q] GApps install/root on Trio Stealth Lite?

Hi there! As you can probably tell, I'm new to the forums here, so hopefully I'm posting this in the right place, and there isn't already something like this out there (I searched for stuff like this, but couldn't really find any good, useful information).
Anyways, I just recently picked up a Mach Speed Trio Stealth Lite (4.3" tablet) from Best Buy. After attempting to install AOKP on it (it was pre-rooted), the install said it failed because it could not install Busybox or something like that, and upon attempting to restart it to see if it had installed or not, it got bricked. So, I went back to Best Buy and, using my Geek Squad Protection Plan, got a replacement. However, the replacement is much different. While the first one I got came pre-rooted, this one is not rooted (as far as I can tell; the file manager that came on it says it doesn't have root, and the kernel doesn't say root anywhere). Additionally, the replacement feels much slower, has a newer version of ICS, and (apparently) the model of the device is used very commonly in Chinese tablets (gs701b), along with the kernel version (3.0.8).
My question is: How, if at all, could I go about rooting this thing, and installing AOKP (or, if possible, Cyanogenmod 10/10.1 for the JB) on it? And even if I can't root it, would it be possible to at least install the GApps bundle for ICS on it, so I can get some of the apps that the manufacturer's image is missing (the gallery, the modern Google search, Play Store, etc.)? The recovery mode lets you wipe data and install an update, but I have no clue how it works (it's not like CWM Recovery where you choose the update zip).
And for the record, I have looked up how to root a gs701b tablet, but none of the instructions really applied to me, or they didn't work (out of the few there were on the Web).
Thanks!!
Don't know if this helps, but...
I picked one up over Memorial Day weekend and for me personally the only thing that was missing was the Play Store, Chrome, and Google Music. I thought about rooting, but given the fact that I did Geek Squad Protection, Accidental on a portable device (extremely low cost since it under $50 over the weekend), concerned me if it would void the coverage, so I looked to see if I could get PS on the device w/out rooting and I found a YouTube vid by jon doe with a Google search for Trio Stealth Lite 4.3+Google Play Store. My comment is the most recent and I really am grateful. I've rooted before, HP Touchpad from CM9 to CM10, so it's not that I'm scared to do it, but for a $50 device, the easier I can do it, the better. I'll let you decide for yourself, just hoping that helps.

Am I stuck with the version of Android that came with my WM8880/GA-1311F netbook?

I have a Chinese netbook with Android 4.2.1 on it, and I've managed to root it. I've been interested in installing something like CyanogenMod or even Linux on it. The problem is that everything seems to be centered around very specific device information like manufacturers and model number in the ARM/Android world. But unfortunately, the most specific numbers associated with my device tie it back to a chipset manufacturer called WonderMedia, WM8880 GA-1311F. And I can't find anything at all about that device except that there's supposedly a 7-inch tablet or two with the same chipset, but their manufacturers are fairly unknown as well. When I do Google searches for the serial number, I mostly find my own old threads
I keep hitting dead ends trying to figure out how to boot something else on this device, because they expect me to know a specific recovery procedure or have a device specific ROM to apply.
Am I basically stuck with what I've got? I mean, I've been doing searches for days, I've searched for specific strings found under build info, and found nothing. I keep hunting for clues about the nature of the device in the kernel logs, and I keep coming up empty. The closest thing I can find is information about an older WM8650 netbook, and I saw a dead thread somewhere that implied there was an architectural similarity between WM8880 and that one, but I wasn't able to find anything about my device specifically.
I really don't want to waste anymore time with this if I don't have any chance of getting anywhere with it. Just tell me the truth... am I stuck with the pre-installed version of Android on this device?
I was hoping I'd be able to hack the device and do whatever I wanted with it, sort of like a Raspberry Pi in laptop form, but I'm starting to think I made a mistake because this device seems hopelessly locked into running Android 4.2.
Well, I found out that my device actually has something called U-boot built in. It wasn't easy to find because I had to dump a region of flash memory, hunt around in a hex editor, cut off part of the file, and then gunzip it to see it. Apparently my device can be booted from an SD card through a file called "FirmwareInstall/autorun.1.wmt". I also saw an odd reference to a USB disk and "FirmwareInstall/autorun.u.wmt", which may suggest it can also be booted from USB.
At first I tried to have it print a Hello World message, but it didn't work. However, I did notice that when I put the file in place, the machine refused to power down with the SD card inserted, which was abnormal. Clearly, it was changing something, but the console isn't visible. So I tried the "poweroff" command instead, and sure enough the netbook started cycling its power until I removed the SD card.
Apparently there IS a way to get stuff working on here, but I would have to know TONS of low-level memory addresses for loading stuff like the kernel, they recommend installing stuff over the network for some weird reason, and it seems like you have to use a specific device tree to get it up and running. Half the ARM Linux installation documentation was just an apology saying that devices vary and there's no consistent implementation of anything.
So it seems like it's POSSIBLE to get something else working on here, but I would literally have to reverse engineer every little aspect of the machine and study every single subsystem carefully in order to do so. What's frustrating is that there is a person who is doing work on very similar devices like the 8505, 8650, and 8850, but they're not supporting mine because, get this, the developer's 8880 tablet was damaged from messing with those ridiculous analogue console pins, and they can't be bothered to buy another one. So anyone that has my chipset is stuck without any kind of support for anything, and I would be lucky to get a console framebuffer with keyboard support running on this stupid thing.
Overall, everything I read was just more and more bad news... stuff like the default console for the installer often being a serial terminal that you have to break open the computer to use. Everything about ARM devices is painful, and you apparently have to fight tooth and nail to get them to run anything besides their stock version of Android, and all because there's no standardization and no BIOS.
hi do you still have the netbook i need the rom for it

Need help "preserving" an SM-G900T in a few different ways

I feel super awkward and a bit embarrassed to ask this question, but I'm asking for help from this community (see last 2 or paragraphs for ask if you want to skip the boring details) and I think I need to explain briefly why to define my ultimate goal and why I even have to ask rather than sift through searches and assemble the steps/versions I need, etc.
My 22 year old daughter died recently (unexpectedly). I obviously want to preserve everything I can of hers, but I'm not firing on all cylinders mentally. I was able take her ThinkPad and virtualize it to my ESX system and also yank and clone the physical drive for safe keeping. But even doing that took me a while (which it shouldn't, that's kind of what I do for a living - I should be able to do that in my sleep, but it took 3 days and a lot of screaming). I was able to access her google accounts, facebook accounts, etc. and preserve a ton of stuff from there.
Ultimately while I would want to do with her phone the same thing I did to her notebook - preserve it virtually so I could examine it without fear of changing/modifying anything, but I don't think the product exists that allows me to virtualize an existing Android phone with apps and everything intact into a PC environment. I think I could install a whole new Android emulator in Windows, but that's not probably what I want.
I had just given her a Samsung S5 SM-G900T running on Ting for her birthday about 2 weeks before she died. It was unlocked but unrooted, it's rare that I would do nothing to the phone prior to giving it to her - but I pretty much just turned it on and handed it over with no custom ROM or anything - mostly because I was pressed for time the day of her party and it was shipped late.
When I got it back from the police a few say ago (they held it for 2 months) and charged it and turned it on 2 days ago, it upgraded from Lollipop to Marshmallow 6.0.1 (baseband is PE1), which was apparently pending. I don't know if that complicates things. It pissed me off, though. I have copied off local photos off and videos and already took control of her Google and Facebook accounts as I mentioned.
My slightly confused brain tells me normally I might install TWRP or CWM and make a NAND backup and copy it off someplace and at least have a restorable copy of her phone. I haven't done much of this sort of thing with phones for a year or two, I don't know what's changed in the latest OS versions and beides, plus I sort of "lose it" a bit, especially going through her personal things.
I'm not an idiot, I'm just not all here, yet. I'm asking if someone can please give me steps to safely preserve an image of her phone (IE, install TWRP or CWM using specific version xxx, etc., using Odin version xxx, etc.) - If I can virtualize it, too, I'd love to know what product does that, but again, I don't think I can.
I don't know why I feel the need to do these things, I just do.
Any help would be greatly appreciated.
Bump. Somebody please help this fellow. This is too important for me to try advising him, I don't know enough.
So even though half my brain is addled, I did some more research and found out a few interesting things, should anyone care to try this. I found there are a couple of open source tools built for android forensics:
Open Source Android Forensics Toolkit
https://sourceforge.net/projects/osaftoolkit/
Santoku
https://santoku-linux.com/about-santoku/
And there are commercial products, , like NowSecureForensics, some (if not most) built on the toolkits I just mentioned. Another is the painfully ironically named (for me, anyway) Autopsy.
This interesting website verified (to me anyway) that rooting the phone and changing access is still fundamentally sound forensically:
http://freeandroidforensics.blogspot.com
And it confirmed there is no way (yet) to truly "virtualize" the phone entirely (unless you are the manufacturer and you have some proprietary software).
For a "live" example virtually, the best you can do is install an Android emulator and restore an ADB backup of an app. This obviously may or may not work if the app is very hardware dependent. But for a simple program it might work fine.
So in addition to rooting my daughter's S5, installing TWRP, and backing it up, I also got my daughter's HTC One M7 to finally power up, and I rooted it and installed TWRP for backup purposes as well. Many of the forensic tools I mentioned will then report from the standard TWRP backups, with no risk to changing the phone. Some want to look at the phone themselves, even offering to root them, which I find more risky.
I haven't found any one tool to fully provide what I need, you need a Windows PC, a Linux PC (or VM), one or more toolsets (each comprised of other toolsets) and then a lot of time/will to really piece together things. I haven't completed the examinations - even typing is harder now for some reason, but should anyone else need this sort of thing (hopefully for different reasons than mine), the above info is a good start.

Help.... please

Hi, I've got an INTEX Aqua Prime 3G smartphone. At first everything seemed to be fine, but two weeks after buying it popup ads started to show up and apps began to install themselves (Activitys and such......). As I've read, it seems the rom comes with malware itself, so it's not like I fked it up, it was already a mess from the beginning....
Things are: I rooted the phone cause I thought maybe I could get rid of the system apps that were provoking this. I deleted a lot of apps just to keep having the same problems with popup ads and self-installed apps. It does not go away.....
So I thought I could install a new ROM. Here comes the problem... I can't seem to find any rom for this phone (along with any info... it's like it doesn't exist for some reason).
Could I install a rom which is designed for other smartphone but with the same processor as mine? I'm just super confused, super tired and I don't know what else to do with all this.
plshelpimdesperate said:
Hi, I've got an INTEX Aqua Prime 3G smartphone. At first everything seemed to be fine, but two weeks after buying it popup ads started to show up and apps began to install themselves (Activitys and such......). As I've read, it seems the rom comes with malware itself, so it's not like I fked it up, it was already a mess from the beginning....
Things are: I rooted the phone cause I thought maybe I could get rid of the system apps that were provoking this. I deleted a lot of apps just to keep having the same problems with popup ads and self-installed apps. It does not go away.....
So I thought I could install a new ROM. Here comes the problem... I can't seem to find any rom for this phone (along with any info... it's like it doesn't exist for some reason).
Could I install a rom which is designed for other smartphone but with the same processor as mine? I'm just super confused, super tired and I don't know what else to do with all this.
Click to expand...
Click to collapse
Looks like you're not the only one - https://forum.xda-developers.com/android/help/firmware-intex-aqua-prime-3g-android-5-1-t3606082 But, did you see this - https://m.youtube.com/watch?v=7w76584pbOY
levone1 said:
Looks like you're not the only one - https://forum.xda-developers.com/android/help/firmware-intex-aqua-prime-3g-android-5-1-t3606082 But, did you see this - https://m.youtube.com/watch?v=7w76584pbOY
Click to expand...
Click to collapse
Thank you so much por replying. I've seen the video but my problem is not about not knowing how to flash it. There are no roms for my phone it seems.... so I was wondering if I could install one that it's not made specifically for it... also I can't risk bricking it as it's the only phone I have, so I just really don't know what to do
It seems like I lost the money
plshelpimdesperate said:
Thank you so much por replying. I've seen the video but my problem is not about not knowing how to flash it. There are no roms for my phone it seems.... so I was wondering if I could install one that it's not made specifically for it... also I can't risk bricking it as it's the only phone I have, so I just really don't know what to do
It seems like I lost the money
Click to expand...
Click to collapse
Don't think so. Probably a slim chance to be able to port, but you still need system files from your rom, and a custom rom from a phone with same resolution and cpu. Might be a chance, (I don't know how much you messed up your /system, but maybe still have the files you need)... Search Google for 'port rom xda'...

Categories

Resources