Hi , i have 2 s6 edge g925f. Phone dyed after error in write hiden in odin. Phone display recover software by smart switch, i try:
-delete hiden from file by total comander, delete md5 from file name and flash this file - after this phone hand on start logo (sasmsun s6 edge)
- doload difrent files - G925FXXU3QOK6_G925FCAM3QOK1_G925FXXU3QOJK_HOME.tar, and G925FXXU3QOK6_G925FCAM3QOK1_G925FXXU3QOJK_HOME.tar, adfetr flash this file still hand on strat logo
- also try after this factory reset and clean cache in recovery - still hand on start logo
- try write s6 uni kerlenl v8 002 with root - still hand on sytart logo
- try flash with and without pit, try woth and without repartition, and phone botloader udate
any other idea my friends?
TOMI111 said:
Hi , i have 2 s6 edge g925f. Phone dyed after error in write hiden in odin. Phone display recover software by smart switch, i try:
-delete hiden from file by total comander, delete md5 from file name and flash this file - after this phone hand on start logo (sasmsun s6 edge)
- doload difrent files - G925FXXU3QOK6_G925FCAM3QOK1_G925FXXU3QOJK_HOME.tar, and G925FXXU3QOK6_G925FCAM3QOK1_G925FXXU3QOJK_HOME.tar, adfetr flash this file still hand on strat logo
- also try after this factory reset and clean cache in recovery - still hand on start logo
- try write s6 uni kerlenl v8 002 with root - still hand on sytart logo
- try flash with and without pit, try woth and without repartition, and phone botloader udate
any other idea my friends?
Click to expand...
Click to collapse
Try different versions of Odin.
triedflash by odin 3.10.6 and flash by z3x boox - still hand on samsung logo, any other idea?
i also tried to make recover by smart swith pc - i enter sn from other g925f, and after 2 houers, phone flased sucess, but still hand on samsung logo. Any othe ridea?
Look this mate!
http://forum.xda-developers.com/showpost.php?p=64085821&postcount=8
Did a FULL WIPE after the smartswitch recover???
vennon! said:
Look this mate!
http://forum.xda-developers.com/showpost.php?p=64085821&postcount=8
Did a FULL WIPE after the smartswitch recover???
Click to expand...
Click to collapse
yes i done it, not help, smart switch recovery and full vipe not help
fixed by unikernel
Related
i was chargin my s6e on wifi charger . but when i came back phone went in boot loop and it keeps restarting ever 2-3seconds , wont go further ...
i tried to flash G925FXXU2BOFJ but no success ,,, somehow i cannot get into recovery menu ...
i tried 5.0.2 no luck also ////
edit: ive used last odin 3.10.6
edit 2 : i flashed costum recovery , boot lop stop and it stuck samsung galaxy s6 edge logo and at top in red says : recovery is not seandroid enforcing
any help please
lummujaj said:
i was chargin my s6e on wifi charger . but when i came back phone went in boot loop and it keeps restarting ever 2-3seconds , wont go further ...
i tried to flash G925FXXU2BOFJ but no success ,,, somehow i cannot get into recovery menu ...
i tried 5.0.2 no luck also ////
edit: ive used last odin 3.10.6
edit 2 : i flashed costum recovery , boot lop stop and it stuck samsung galaxy s6 edge logo and at top in red says : recovery is not seandroid enforcing
any help please
Click to expand...
Click to collapse
First of all you can shutdown the device from TWRP if you want.
Second what Android version is that firmware?
v5.0.2 or v5.1.1?
Third did the firmware file pass the MD5 check?
Sent from my Samsung Galaxy Tab Pro 10.1
<OSM> G925FXXU2BOFJ_G925FOXA2BOFJ_G925FXXU2BOFJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
its android 5.1.1
i cannot enter recovery either stock one or custom one . when i flesh via odin , everything goes fine .. no error no interruptions...
hmm... when it finishes in odin phone automatically must goes in recovery to clear cache and factory reset but mine s6e wont do this... i think this is the problem . i need to have recovery to fix my phone
lummujaj said:
<OSM> G925FXXU2BOFJ_G925FOXA2BOFJ_G925FXXU2BOFJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
its android 5.1.1
i cannot enter recovery either stock one or custom one . when i flesh via odin , everything goes fine .. no error no interruptions...
hmm... when it finishes in odin phone automatically must goes in recovery to clear cache and factory reset but mine s6e wont do this... i think this is the problem . i need to have recovery to fix my phone
Click to expand...
Click to collapse
Did you try from setting a factory reset ? You know that option...
Did you read my previous posts ??
Im stuck in boot loop
go into download mode..flash the right firmware for your phone..if there are problems..than it's not the right firmware..you can clear the phone also with Odin..no need of recovery...you just must activate it in the settings..if you got problems.. just write it exactly or no one can help you..maybe screenshot..
I believe if you put it in Download mode (hold vol. down + home + power) and flash a ROM through Odin it should boot. you may need a PIT file.
KarimSalloum said:
I believe if you put it in Download mode (hold vol. down + home + power) and flash a ROM through Odin it should boot. you may need a PIT file.
Click to expand...
Click to collapse
there's no need of pit..just the right firmware.. if not exactly the same..delete hidden img from firmware
Hey Alex
Can you please give me an advice? I am currently on official firmware G925FXXU2POGN 5.1.1. Can I flash without any issues the G925FXXU2BOFJ (5.1.1 Uk BTU version) with odin?
Hi.
A friend has bought a second hand S6 Edge witch don´t boot. The phone stays in the initial Samsung S6 Edge logo and don´t do anything.
I have flashed tcwm recovery. In the recovery was a message unable to mount /system and unable to mount /data. If have formatted the /data and the message of /data disappeared and the recovery and the pc read the storage.
I flashed the original firmware, and after flashing it the phone reboots, and when the android logo appears and starts loading. At the half of loading appears a message "ERASING..." and then again the fist Samsung logo and there stays freeze. I don´t know why do this and how to do... Any ideas??
I was searching something about but I didn´t find nothing like this case.
Thank you.
it is normal. if you are on 5.1.1 please flash unibase kernel for 5.1.1 if not flash the one for 5.0.2 problem solved
But I don´t understand. When if flash the 5.1.1 firmware I flash the kernel too, it´s included in the new firmware, is´t it?
I´ve installed the 5.1.1 unibase kernell and do the same. Erasing... and in the TCWM appears the message "No OS installed!!". Any ideas?
I don´t know what try.
I have flashed the firmware with Odin that Smart Switch has downloaded and do the same thing. The files I have flashed are:
BL_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
AP_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
CP_G925FXXU2COH2_CL5599585_QB5974109_REV02_user_low_ship.tar.md5
CSC_TEF_G925FTEF2COH1_CL5641944_QB6041794_REV02_user_low_ship.tar.md5
In the stock recovery appears the message of the photo.
https:// youtu.be/d3BignvuNfw
****... your imei is gone mate...
install twrp.
have a backup of your phone when you go to recovery again in case if you didnt lose your imei yet.
then go to wipe and advanced wipe then select everything except usb-otg then wipe.
put into download mode and connect smart switch.
recover your phone using emergency recovery.
when it finishes, your phone may have a distorted screen. dont panic.
put it on download mode again
flash 5.1.1 unibase kernel
then you are good to go but your imei is gone probably mate... i feel sorry for you because i have the same issue..
Hi, I recently had a problem with my Samsung Galaxy J1 (SM-J100MU). I just try to insert another ROM using Odin3 and it doesn't work, then my brother try to put a root zip selecting all options in Odin and it makes the phone left with a black screen when turned On. I can go to Download Mode and Recovery Mode.
I just wipe data/factory reset and wipe cache partition, but it doesn't work.
What I have to do? Because I can not find the original Bootloader and Phone Modem and CSC if it just replaced with that root file. I don't know the motive of this 'black screen' when starting android. (Either the logo appears)
Now I'm downloading the original ROM with my Carrier to see if I can restore my phone
Thanks.
Matias
Hi, I recently had a problem with my Samsung Galaxy J1 (SM-J100MU). I just try to insert another ROM using Odin3 and it doesn't work, then my brother try to put a root zip selecting all options in Odin and it makes the phone left with a black screen when turned On. I can go to Download Mode and Recovery Mode.
I just wipe data/factory reset and wipe cache partition, but it doesn't work.
What I have to do? Because I can not find the original Bootloader and Phone Modem and CSC if it just replaced with that root file. I don't know the motive of this 'black screen' when starting android. (Either the logo appears)
Now I'm downloading the original ROM with my Carrier to see if I can restore my phone
Thanks.
Matias
Hello everyone, I flashed the wrong TWRP recovery for the SM-G925F (I flashed the S6 instead of S6 edge) and after that my phone won't boot anymore, It would show the Samsung S6 Edge logo and then just a black screen with vibrations. I've tried Flashing several ROMs and Kernels and Bootloaders but still no effect.. Please Help.
So you require immediate help when you messed up your phone? Have you tried flash, wipe, flash to try and clear any leftover files ?
Goto the bottom of post 3-: http://forum.xda-developers.com/showpost.php?p=61001705&postcount=3
Download twrp tar.md5 version.
Open odin and place in AP, disable auto reboot
Put phone into download mode and connect, click start.
Hard power off.
Turn on device in recovery mode, factory reset and restart.
Should be good to go after that