Samsung s6 edge "erasing..." on loading - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hi.
A friend has bought a second hand S6 Edge witch don´t boot. The phone stays in the initial Samsung S6 Edge logo and don´t do anything.
I have flashed tcwm recovery. In the recovery was a message unable to mount /system and unable to mount /data. If have formatted the /data and the message of /data disappeared and the recovery and the pc read the storage.
I flashed the original firmware, and after flashing it the phone reboots, and when the android logo appears and starts loading. At the half of loading appears a message "ERASING..." and then again the fist Samsung logo and there stays freeze. I don´t know why do this and how to do... Any ideas??
I was searching something about but I didn´t find nothing like this case.
Thank you.

it is normal. if you are on 5.1.1 please flash unibase kernel for 5.1.1 if not flash the one for 5.0.2 problem solved

But I don´t understand. When if flash the 5.1.1 firmware I flash the kernel too, it´s included in the new firmware, is´t it?
I´ve installed the 5.1.1 unibase kernell and do the same. Erasing... and in the TCWM appears the message "No OS installed!!". Any ideas?

I don´t know what try.

I have flashed the firmware with Odin that Smart Switch has downloaded and do the same thing. The files I have flashed are:
BL_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
AP_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
CP_G925FXXU2COH2_CL5599585_QB5974109_REV02_user_low_ship.tar.md5
CSC_TEF_G925FTEF2COH1_CL5641944_QB6041794_REV02_user_low_ship.tar.md5
In the stock recovery appears the message of the photo.
https:// youtu.be/d3BignvuNfw

****... your imei is gone mate...
install twrp.
have a backup of your phone when you go to recovery again in case if you didnt lose your imei yet.
then go to wipe and advanced wipe then select everything except usb-otg then wipe.
put into download mode and connect smart switch.
recover your phone using emergency recovery.
when it finishes, your phone may have a distorted screen. dont panic.
put it on download mode again
flash 5.1.1 unibase kernel
then you are good to go but your imei is gone probably mate... i feel sorry for you because i have the same issue..

Related

[Q] Phone bricked? Only grey battery is displayed.

Hi, I hope you can help me as I am clueless about my phone...
I had the stock 4.1.2 firmware on my phone and wanted to update to Slimkat 4.2, so I first flashed the Siyah-s2-v6.0b5 kernel, check if the device is rooted and booted into recovery.
In recovery I did the factory reset, wiped the cache and formated the system partition.
Then the mistake happened and instead of flashing the Slimrom firmware I kept my finger to long on the swipe enabled recovery and selected "Reboot now" by mistake...
Basically since then my phone can only enter the Download mode (at least). I cannot enter recovery and I cannot boot it.
I flashed the Stock 4.1.2 firmware again but the problem remains. Directly after flashing the firmware when the phone gets rebooted I can see the white Samsung logo (where the yellow triangle would appear with a rooted kernel), then instead of showing to boot animation it switches to the charging screen but it does not charge (battery is and keeps grey).
I also put in another battery just for the case but that didn't change anything of course...
I hope you can help me, else I have the first brick for my wall of shame...
P.S. The stock firmware I use is "I9100XWLSD_I9100DBTLS7_DBT" from sammobile.
Can you still boot to download mode? If not, then look for a USB JIG.

samsung galaxy s3 gt-i9300 doesnt boot

EDIT:i installed stock rom again and its working now.but i get a box with yellow text.whats that
?
hello
i am very tired now.i tried everything but got no success
here is what the problem is
While i was using my mobile.it suddenly got switched off and when tried to boot it.it goes into bootloop.i fixed the boot loop but now there is another problem.it doesnt boot.it only shows samsung galaxy s3 and goes black screen
here is what i tried
i flashed s3 frimware and installed it with odin.installed clockworkmod recovery and deleted davik cache and those parts (wipe data etc)
install cynogen mod 12 (idk whats wrong.but the installation hardly takes a minute.its like this
Code:
installing,
updating
done
within less than a minute it shows completed.
i can access recovery mode,download mode.
please help me on how can i start my samsung galaxy s3 gt-i9300
i have tried everything.please suggest me what to do
The yellow window shows factory mode and means, that your efs-data are corrupt: you can switch off this window by deleting the same named app, but you wont get access to any telephone network.
So, if you didn't backup your efs-data, try first repair-function of KIES. If it doesn't help, post the version of firmware, actually is installed.

I can only enter recovery mode...PLEASE HELP

Hello guys and thank you for reading this post. I have successfuly rooted my phone yesterday and tried to install Xposed framework. First I installed Xposed framework zip file and then apk. After that i enter recovery mode and flashed zip file. And my sad story starts now. After i flashed zip file i my phone get stucked at bootloop. So every time i try to power on my phone there only appear samsung logo and got stucked at that point. Then went in recovery mode to Advanced-File Manager and deleted xposed zip file. Then i tried to power on my phone but there i get stucked on samsung logo again. After that I back up all files. Then i wiped all Dalvik,System,Data,Internal Storage,Cache after that when i try to power on my phone it always enter recovery mode (it is not stucked at samsung logo)...I think i deleted my OS. I restore my back up data and tought that i will be at same point as before wiping but i am not. It keeps to enter recovery mode every time i try to power on phone. I don't know what to do now. Please help me! I have a problem with connecting my phone to PC too. :crying:
Please help...
Anyone? :crying:
Backup personal data -> factory reset -> reflash ROM -> restore data -> profit
But as said above, a little more information would be helpful. Device name, model number, what recovery, what version of android, blood type, social security number, you know, the normal stuff
How to reflash ROM?
Samsung Galaxy J5 (2016)
I can only enter Downloading mode and TWRP recovery.
Model: SM-J510FN
SNN: -J510FNGSMH

[HELP] Cannot boot into system after installing TRWP

Hello,
the last two days I try to get TWRP working so I can install magisk. I installed TWRP via Odin and I can access TWRP.
But when I try to reboot into the normal system my phone gets into a bootloop. It starts shows the logo goes black starts again and so on. I can still enter TWRP through the button combination.
Any ideas what went wrong?
Device: Samsung S7 edge SM-G935F with Android 8.0.
Phone is on factory settings
Thanks in advance
Try reflashing the boot. Check if it works. If not try flashing the stock recovery back and then check.
If that also dont solve your problem. reflash things using ODIN.

SM-G800F Samsung logo flashing after flashing new firmware

I have an old Galaxy S5 mini (SM-G800F) and recently had to flash a new firmware because it wasn't turning on normally. I flashed the new firmware (pretty sure the right one) with the latest version of Odin, and all proceeded well, until the phone rebooted itself, and there the Samsung logo is flashing. I tried to enter the recovery mode and it worked, i wiped both data anche cache partiton from recovery mode and then rebooted, but it still has the Samsunf logo flashing. Don't know how to fix this, thanks.
Fixed
DaddeRaga said:
I have an old Galaxy S5 mini (SM-G800F) and recently had to flash a new firmware because it wasn't turning on normally. I flashed the new firmware (pretty sure the right one) with the latest version of Odin, and all proceeded well, until the phone rebooted itself, and there the Samsung logo is flashing. I tried to enter the recovery mode and it worked, i wiped both data anche cache partiton from recovery mode and then rebooted, but it still has the Samsunf logo flashing. Don't know how to fix this, thanks.
Click to expand...
Click to collapse
Sorry for bothering you, you can close this thread because the phone just turned on after like 1 hour or even more.

Categories

Resources