samsung galaxy s3 gt-i9300 doesnt boot - Galaxy S III Q&A, Help & Troubleshooting

EDIT:i installed stock rom again and its working now.but i get a box with yellow text.whats that
?
hello
i am very tired now.i tried everything but got no success
here is what the problem is
While i was using my mobile.it suddenly got switched off and when tried to boot it.it goes into bootloop.i fixed the boot loop but now there is another problem.it doesnt boot.it only shows samsung galaxy s3 and goes black screen
here is what i tried
i flashed s3 frimware and installed it with odin.installed clockworkmod recovery and deleted davik cache and those parts (wipe data etc)
install cynogen mod 12 (idk whats wrong.but the installation hardly takes a minute.its like this
Code:
installing,
updating
done
within less than a minute it shows completed.
i can access recovery mode,download mode.
please help me on how can i start my samsung galaxy s3 gt-i9300
i have tried everything.please suggest me what to do

The yellow window shows factory mode and means, that your efs-data are corrupt: you can switch off this window by deleting the same named app, but you wont get access to any telephone network.
So, if you didn't backup your efs-data, try first repair-function of KIES. If it doesn't help, post the version of firmware, actually is installed.

Related

Unable to boot to Recovery Mode GS3

Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
cugami said:
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
Click to expand...
Click to collapse
GO here : http://forum.xda-developers.com/showthread.php?t=1993044

[Q] Blocked on start screen Sansung S3 after failed install new ROM

Hello guys,
I need your help because my GS3 can't restart, it's blocked on start screen Sansung S3
In fact, my S3 was rooted and I installed Rom Manager to change "easilly" the Rom ( for XperianZe-0.9.9_AROMA_JKay_Elegant6-EMC3)
One precision : before changing Rom, Rom Manager made some changes in the CWM.... and I think my problem is here.
I succeed to instal the new Rom XperianZe using Rom manager (clean Wipe, cache, etc...) and it worked but I wanted to try another one Rom (Android_Revolution_HD-SGS3_25).
I had noticed before installing the latest ROM when I wanted to start the S3 in Recovery Mode manually, the screen remained blocked after posting Odin mode / product name:GT i9300 / Current binary download : yes / system status : custom and after the message "Downloading ... Do not turn off target!!" and then nothing ... but through Rom manager, I could access ...
But, for some unexplained reason, the installation of the Rom Revolution failed and the S3 rebooted and now I get stuck on the start screen Samsung Galaxy S3
The problem is that now I can not access the recovery, because I have always the message "Downloading ... Do not turn off target!"
Through Odin, it's impossible because the recovery is blocked, the device is not detected.
Could you help me, please, how to install a new recovery and then reinstall a ROM? thank you in advance for your help
Try accessing recovery by restarting the phone, pressing power button volume up and home, that should get you into recovery. If that works wipe everything and try installing the last ROM again or simply restore your nandroid of your working ROM.

[Q] Stuck on loop GT-S5830i

Hi
I have a problem. I rooted my phone, instaled some custom rom with cm7 biel's kernel. There was 0 problem with that. I instaled some apps and played some games and then my phone got stuck on black screen with only touch keys light on. I reset my phone but it rebooted like it was it first time (google acc configuration and etc.). Rebooted it again and it appeared again. Next time I restarted seen only samsung galaxy ace logo. Tried to put phone on download but i can't (only logo appears). Recovery starts but only as CWM and i cant mount data (error: cant mount /data). On SG Ace logo, odin sees my phone on 2 ports(0:[COM4] and 1:[COM3]). What to do? Better to flash some rom by recovery or try to put some stock rom on logo screen?
P.S: I can't turn off phone, it keeps to restart to last mode
EDIT: K, almost done. Now i can turn on system and odin mode. But still cant mount /data and my internal storage for apps is unknown (i bet it would be 0/0b). What should i do?
Kwasek1 said:
Hi
I have a problem. I rooted my phone, instaled some custom rom with cm7 biel's kernel. There was 0 problem with that. I instaled some apps and played some games and then my phone got stuck on black screen with only touch keys light on. I reset my phone but it rebooted like it was it first time (google acc configuration and etc.). Rebooted it again and it appeared again. Next time I restarted seen only samsung galaxy ace logo. Tried to put phone on download but i can't (only logo appears). Recovery starts but only as CWM and i cant mount data (error: cant mount /data). On SG Ace logo, odin sees my phone on 2 ports(0:[COM4] and 1:[COM3]). What to do? Better to flash some rom by recovery or try to put some stock rom on logo screen?
P.S: I can't turn off phone, it keeps to restart to last mode
EDIT: K, almost done. Now i can turn on system and odin mode. But still cant mount /data and my internal storage for apps is unknown (i bet it would be 0/0b). What should i do?
Click to expand...
Click to collapse
EDIT2: You can close thread. First i flashed new rom. later i odined some stock rom with pit file and everything is all right . Btw. forum for ace is dead?
Kwasek1 said:
EDIT2: Btw. forum for ace is dead?
Click to expand...
Click to collapse
No .

Samsung s6 edge "erasing..." on loading

Hi.
A friend has bought a second hand S6 Edge witch don´t boot. The phone stays in the initial Samsung S6 Edge logo and don´t do anything.
I have flashed tcwm recovery. In the recovery was a message unable to mount /system and unable to mount /data. If have formatted the /data and the message of /data disappeared and the recovery and the pc read the storage.
I flashed the original firmware, and after flashing it the phone reboots, and when the android logo appears and starts loading. At the half of loading appears a message "ERASING..." and then again the fist Samsung logo and there stays freeze. I don´t know why do this and how to do... Any ideas??
I was searching something about but I didn´t find nothing like this case.
Thank you.
it is normal. if you are on 5.1.1 please flash unibase kernel for 5.1.1 if not flash the one for 5.0.2 problem solved
But I don´t understand. When if flash the 5.1.1 firmware I flash the kernel too, it´s included in the new firmware, is´t it?
I´ve installed the 5.1.1 unibase kernell and do the same. Erasing... and in the TCWM appears the message "No OS installed!!". Any ideas?
I don´t know what try.
I have flashed the firmware with Odin that Smart Switch has downloaded and do the same thing. The files I have flashed are:
BL_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
AP_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
CP_G925FXXU2COH2_CL5599585_QB5974109_REV02_user_low_ship.tar.md5
CSC_TEF_G925FTEF2COH1_CL5641944_QB6041794_REV02_user_low_ship.tar.md5
In the stock recovery appears the message of the photo.
https:// youtu.be/d3BignvuNfw
****... your imei is gone mate...
install twrp.
have a backup of your phone when you go to recovery again in case if you didnt lose your imei yet.
then go to wipe and advanced wipe then select everything except usb-otg then wipe.
put into download mode and connect smart switch.
recover your phone using emergency recovery.
when it finishes, your phone may have a distorted screen. dont panic.
put it on download mode again
flash 5.1.1 unibase kernel
then you are good to go but your imei is gone probably mate... i feel sorry for you because i have the same issue..

samsung galaxy tab 2 10.1 gt-p5110 stuck in boot-loop

i own a samsung galaxy tab 2 10.1 gt-p5110 , i got it off my cousin who doesnt know anything about tablets etc.. she told me it just broke.
now what the tablet does is when ever i press the power button to power on, galaxy logo appears as normal and it goes straight into recovery mode.
things i tried:
wipe factory data
tried wipping cache but tablet said "error" and rebooted so i installed twrp custom recovery and wiped cache with no problems this time, but table issue didnt solve
flashed stock firmware via odin ( 2 different ones) stil same issue after succecifull flash, tablet would reboot and the green android man would appear saying "updating" but then would say "error" and reboot back to stock recovery with "no command" at the buttom of screen.
any help highly appreciated.

Categories

Resources