Hello guys,
I need your help because my GS3 can't restart, it's blocked on start screen Sansung S3
In fact, my S3 was rooted and I installed Rom Manager to change "easilly" the Rom ( for XperianZe-0.9.9_AROMA_JKay_Elegant6-EMC3)
One precision : before changing Rom, Rom Manager made some changes in the CWM.... and I think my problem is here.
I succeed to instal the new Rom XperianZe using Rom manager (clean Wipe, cache, etc...) and it worked but I wanted to try another one Rom (Android_Revolution_HD-SGS3_25).
I had noticed before installing the latest ROM when I wanted to start the S3 in Recovery Mode manually, the screen remained blocked after posting Odin mode / product name:GT i9300 / Current binary download : yes / system status : custom and after the message "Downloading ... Do not turn off target!!" and then nothing ... but through Rom manager, I could access ...
But, for some unexplained reason, the installation of the Rom Revolution failed and the S3 rebooted and now I get stuck on the start screen Samsung Galaxy S3
The problem is that now I can not access the recovery, because I have always the message "Downloading ... Do not turn off target!"
Through Odin, it's impossible because the recovery is blocked, the device is not detected.
Could you help me, please, how to install a new recovery and then reinstall a ROM? thank you in advance for your help
Try accessing recovery by restarting the phone, pressing power button volume up and home, that should get you into recovery. If that works wipe everything and try installing the last ROM again or simply restore your nandroid of your working ROM.
Related
Hi everyone! I have a serious problem with my phone. It's mtk6572 based and runs on AOSP android 4.2.2 (M-pai s720) and it's rooted.
After installing Xposed Framework, I added a module named "Gravity Box" and in order for it to work , a reboot was required.
The phone shut down and after turning it back on, it stuck on boot animation.
After pulling the battery out and reinserting it, i entered recovery mode (stock android recovery), wiped cache and factory formatted it. Everything goes fine. But when i try to turn it back on after resetting (in the recovery menu) , it still remains in boot animation. I have tried all possible combinations, including leaving out the battery for a period of time etc.
If it helps- pressing Vol Up and power button, sends in a different menu for testing. All tests are passed, so there is not a hardware problem.
If there is any way to fix this problem (using ADB, or accessing and editing system files), please help me. Thank you !
Wipe data/factory reset, then install fresh rom through adb or recovery, should be fine after that.
Sent from my GT-N7100 using XDA Premium 4 mobile app
arblitroshani said:
Hi everyone! I have a serious problem with my phone. It's mtk6572 based and runs on AOSP android 4.2.2 (M-pai s720) and it's rooted.
After installing Xposed Framework, I added a module named "Gravity Box" and in order for it to work , a reboot was required.
The phone shut down and after turning it back on, it stuck on boot animation.
After pulling the battery out and reinserting it, i entered recovery mode (stock android recovery), wiped cache and factory formatted it. Everything goes fine. But when i try to turn it back on after resetting (in the recovery menu) , it still remains in boot animation. I have tried all possible combinations, including leaving out the battery for a period of time etc.
If it helps- pressing Vol Up and power button, sends in a different menu for testing. All tests are passed, so there is not a hardware problem.
If there is any way to fix this problem (using ADB, or accessing and editing system files), please help me. Thank you !
Click to expand...
Click to collapse
It looks like u bricked it but u can fix it by downloading ur stock rom and odin google them and google how to use them
dont forget to thank me if i helped u
Phone: Samsung Galaxy Music Duos
Rom: Latest ICS 4.0.4 official & unavialable
Status: Rooted
ics rom of galaxy music is better than its jb rom
I downloaded the whole rom for my phone and sp-flash tool (used with mediatek devices) . When i try to flash it - it displays an error S_UNSUPPORTED_VER_OF_DA (1022) .
1) Any idea, how can this be fixed ?
2) Do you know any other flash tool for mtk phones ?
3) Can the flashing procedure be done through ADB ?
4) Can I use a backup from stock recovery ?
Have you tried going into safe mode, then delete the xposed module first?
arblitroshani said:
I downloaded the whole rom for my phone and sp-flash tool (used with mediatek devices) . When i try to flash it - it displays an error S_UNSUPPORTED_VER_OF_DA (1022) .
1) Any idea, how can this be fixed ?
2) Do you know any other flash tool for mtk phones ?
3) Can the flashing procedure be done through ADB ?
4) Can I use a backup from stock recovery ?
Click to expand...
Click to collapse
Yes, if you have a backup then just restore it via recovery.
Galaxy Note 2 - rooted and customized leaked 4.3 stock
At&t Galaxy note 2 - rooted stock 4.1.2
Xperia Neo L - Bootloader unlocked, rooted and customized 4.0.4 stock.
(Please excuse my poor English)
I have a Galaxy S3 i9300. OS is Android 4.3, rooted, and old version CWM recovery installed.
I can't remember exact OS and CWM recovery versions, because I had installed them years ago.
Today, I had decided to upgrade my old CWM recovery. I installed ROM Manager apps from
Google Play Store. (I installed and used the Rom Manager app for the first time)
I ran the Rom Manager app and upgraded CWM recovery as the app instructed. No errors were
reported. Then I chose "Reboot into Recovery".
Then the big trouble happend.
1. Normal "Samsung GALAXY S III GT-I9300" boot message appeared
2. Small Hat image and "ClockworkMode Recovery v6.0.4.6" message appeared
3. Screen blacked out.
4. Repeat 1~3 infinitely.
When I tried to connect via USB, my Windows7 PC could not recognize the i9300 at all.
I cannot use the i9300 as phone, too. I cannot do anything at all.
How can I fix this big trouble?
I have the same problem with TWRP recovery, keeps rebooting over and over again, sometimes the recovery menu appearing and reboots after some seconds automatically, please help
I had the same problem with my i9300 with CWM recovery it kept booting back to recovery no mather what i did i can recoment 2 things
1.flash new recovery with odin(did not try this but xould help
2. Flash original samsung firmware also with odin (this helped me)
My advice i olny flash recovery with odin roms with recovery
Thank you. I could fix the problem by flashing another kind of recovery app.
1. Enter the odin mode (press volume_down + home + power when power up , http://forum.xda-developers.com/wiki/Odin_mode )
2. Connect i9300 to PC via USB
3. Flash another kind of recovery app using Odin (in my case. CWMs are not work, but TWRPs are good)
Hi.
A friend has bought a second hand S6 Edge witch don´t boot. The phone stays in the initial Samsung S6 Edge logo and don´t do anything.
I have flashed tcwm recovery. In the recovery was a message unable to mount /system and unable to mount /data. If have formatted the /data and the message of /data disappeared and the recovery and the pc read the storage.
I flashed the original firmware, and after flashing it the phone reboots, and when the android logo appears and starts loading. At the half of loading appears a message "ERASING..." and then again the fist Samsung logo and there stays freeze. I don´t know why do this and how to do... Any ideas??
I was searching something about but I didn´t find nothing like this case.
Thank you.
it is normal. if you are on 5.1.1 please flash unibase kernel for 5.1.1 if not flash the one for 5.0.2 problem solved
But I don´t understand. When if flash the 5.1.1 firmware I flash the kernel too, it´s included in the new firmware, is´t it?
I´ve installed the 5.1.1 unibase kernell and do the same. Erasing... and in the TCWM appears the message "No OS installed!!". Any ideas?
I don´t know what try.
I have flashed the firmware with Odin that Smart Switch has downloaded and do the same thing. The files I have flashed are:
BL_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
AP_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
CP_G925FXXU2COH2_CL5599585_QB5974109_REV02_user_low_ship.tar.md5
CSC_TEF_G925FTEF2COH1_CL5641944_QB6041794_REV02_user_low_ship.tar.md5
In the stock recovery appears the message of the photo.
https:// youtu.be/d3BignvuNfw
****... your imei is gone mate...
install twrp.
have a backup of your phone when you go to recovery again in case if you didnt lose your imei yet.
then go to wipe and advanced wipe then select everything except usb-otg then wipe.
put into download mode and connect smart switch.
recover your phone using emergency recovery.
when it finishes, your phone may have a distorted screen. dont panic.
put it on download mode again
flash 5.1.1 unibase kernel
then you are good to go but your imei is gone probably mate... i feel sorry for you because i have the same issue..
EDIT:i installed stock rom again and its working now.but i get a box with yellow text.whats that
?
hello
i am very tired now.i tried everything but got no success
here is what the problem is
While i was using my mobile.it suddenly got switched off and when tried to boot it.it goes into bootloop.i fixed the boot loop but now there is another problem.it doesnt boot.it only shows samsung galaxy s3 and goes black screen
here is what i tried
i flashed s3 frimware and installed it with odin.installed clockworkmod recovery and deleted davik cache and those parts (wipe data etc)
install cynogen mod 12 (idk whats wrong.but the installation hardly takes a minute.its like this
Code:
installing,
updating
done
within less than a minute it shows completed.
i can access recovery mode,download mode.
please help me on how can i start my samsung galaxy s3 gt-i9300
i have tried everything.please suggest me what to do
The yellow window shows factory mode and means, that your efs-data are corrupt: you can switch off this window by deleting the same named app, but you wont get access to any telephone network.
So, if you didn't backup your efs-data, try first repair-function of KIES. If it doesn't help, post the version of firmware, actually is installed.
Hello guys and thank you for reading this post. I have successfuly rooted my phone yesterday and tried to install Xposed framework. First I installed Xposed framework zip file and then apk. After that i enter recovery mode and flashed zip file. And my sad story starts now. After i flashed zip file i my phone get stucked at bootloop. So every time i try to power on my phone there only appear samsung logo and got stucked at that point. Then went in recovery mode to Advanced-File Manager and deleted xposed zip file. Then i tried to power on my phone but there i get stucked on samsung logo again. After that I back up all files. Then i wiped all Dalvik,System,Data,Internal Storage,Cache after that when i try to power on my phone it always enter recovery mode (it is not stucked at samsung logo)...I think i deleted my OS. I restore my back up data and tought that i will be at same point as before wiping but i am not. It keeps to enter recovery mode every time i try to power on phone. I don't know what to do now. Please help me! I have a problem with connecting my phone to PC too. :crying:
Please help...
Anyone? :crying:
Backup personal data -> factory reset -> reflash ROM -> restore data -> profit
But as said above, a little more information would be helpful. Device name, model number, what recovery, what version of android, blood type, social security number, you know, the normal stuff
How to reflash ROM?
Samsung Galaxy J5 (2016)
I can only enter Downloading mode and TWRP recovery.
Model: SM-J510FN
SNN: -J510FNGSMH