[Q] Stuck on loop GT-S5830i - Galaxy Ace S5830i Q&A, Help & Troubleshooting

Hi
I have a problem. I rooted my phone, instaled some custom rom with cm7 biel's kernel. There was 0 problem with that. I instaled some apps and played some games and then my phone got stuck on black screen with only touch keys light on. I reset my phone but it rebooted like it was it first time (google acc configuration and etc.). Rebooted it again and it appeared again. Next time I restarted seen only samsung galaxy ace logo. Tried to put phone on download but i can't (only logo appears). Recovery starts but only as CWM and i cant mount data (error: cant mount /data). On SG Ace logo, odin sees my phone on 2 ports(0:[COM4] and 1:[COM3]). What to do? Better to flash some rom by recovery or try to put some stock rom on logo screen?
P.S: I can't turn off phone, it keeps to restart to last mode
EDIT: K, almost done. Now i can turn on system and odin mode. But still cant mount /data and my internal storage for apps is unknown (i bet it would be 0/0b). What should i do?

Kwasek1 said:
Hi
I have a problem. I rooted my phone, instaled some custom rom with cm7 biel's kernel. There was 0 problem with that. I instaled some apps and played some games and then my phone got stuck on black screen with only touch keys light on. I reset my phone but it rebooted like it was it first time (google acc configuration and etc.). Rebooted it again and it appeared again. Next time I restarted seen only samsung galaxy ace logo. Tried to put phone on download but i can't (only logo appears). Recovery starts but only as CWM and i cant mount data (error: cant mount /data). On SG Ace logo, odin sees my phone on 2 ports(0:[COM4] and 1:[COM3]). What to do? Better to flash some rom by recovery or try to put some stock rom on logo screen?
P.S: I can't turn off phone, it keeps to restart to last mode
EDIT: K, almost done. Now i can turn on system and odin mode. But still cant mount /data and my internal storage for apps is unknown (i bet it would be 0/0b). What should i do?
Click to expand...
Click to collapse
EDIT2: You can close thread. First i flashed new rom. later i odined some stock rom with pit file and everything is all right . Btw. forum for ace is dead?

Kwasek1 said:
EDIT2: Btw. forum for ace is dead?
Click to expand...
Click to collapse
No .

Related

Unable to boot to Recovery Mode GS3

Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
cugami said:
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
Click to expand...
Click to collapse
GO here : http://forum.xda-developers.com/showthread.php?t=1993044

[Q] SIII will not boot

Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
In download mode is the product number shown or a blank?
If it shows i9300 then you have a good chance of flashing either a full stock rom or a rescue firmware (see general forum) using odin. You will need to factory reset in recovery afterward, but your data is almost certainly unrecoverable.
If the product number is blank then you have partial SDS and require a new motherboard.
Sent from my GT-I9300 using Tapatalk
rachypoo said:
Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
Click to expand...
Click to collapse
Do has boomboomer said above but as a last resort before flashing back to stock or a rescue firmware if you flash PhilZ recovery in download mode with odin.You then have a Aroma option in PhilZ recovery to browse and copy phone files so you may be able to recover some data pictures etc.
Please read PhilZ thread >> http://forum.xda-developers.com/showthread.php?t=2201860 << and the special features thread about Aroma file manager in post #3
Please note use as a last resort to get your data back! and read everything! Also all this is presuming you can get into PhilZ recovery after flashing..
I'm having the same problem , been looking through lots of topics. When I switch on the phone it's not booting android guy lays on his back. Download mode and Android Recovery are in my range.
I've been trying to flash stock-firmware from sammobile.com with ODIN but no effect , I mean It all went OK in Odin Operation list than fially phone reset and PASS. But this android guy is still laying on his back and making fun of me xD
Before trying to get back to stock ROM, I've had rooted phone and installed RR with 4.4.2 for S3, now I don't have a clue what shall I do next ...
Any ideas ? (the noob[me] have asked )
Stuck on samsung logo
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Teamdaiwa said:
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Click to expand...
Click to collapse
You buggered the partitions .
Remove partition .
SOLVED >>
I have solved my problem with this lying android guy on his back , after trying to get back stock. So the thing was on my phone there have been left the kernel from Resurection Remix , I have updated it to Custom Kernel from this topic
http://forum.xda-developers.com/showthread.php?t=2563562
And my newest version of stock firmware is swimming very nice I hope This will help someone

Can't turn on phone, phone not displaying memory (No OS??)

I need help.
I'm running this rom and lately my phone has just been rebooting randomly, well now its switched off and I can't get passed the "Samsung Galaxy S3" on boot. I don't even get to the omni animation.
I booted into recovery in an attempt to flash an old nightly but when I click on install TWRP says 0 internal memory and 0 external memory?
What do I do?
Please help, thanks.
Edit - Another thing, I went to reboot while in recovery and it said I had no OS installed?
It just occured to me that I could probably flash a rom/nightly via odin, since I can get into dl/recovery mode, but since it says 0gb int and ext when in recovery, will this work?
Not detecting memory seems like a hardware issue to me, but I know literally nothing, just asking/helping/promting
ps when i plug in the charger, the battery logo comes up
although its empty (not green), and it has a little circle in the middle to indicating loading of some kind, but the circle doesn't spin, like it's crashed.
i know i have at least 50% battery because it says so when i enter recovery
Recovery format sdcard system data cache .
Boot to download mode flash stock rom via Odin .

[Q] Help ? Bricked Tab ? GT-P3110

Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
When you say mount it do you mean trying to send the files over through ADB or just mounting the SD card or putting it into download mode?
If its the ADB issue, try to put your tablet into download mode by using the volume key and power button, then download odin and its stock firmware and flash it using odin. Your tablet should restore to factory defaults using that method
If its the SD card then use the method above as it sounds like recovery may have lost it a bit
If you can not put the phone into download mode (which i doubt is the issue you may want to think about a USB jig as they sometimes get past those issues but from your description I doubt its a hard brick as it gets to the logo
2 things you can try!
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
I really new to this, i mean writing to help people, so don't flock me.
First, you say your device still have the recharging lights on when shut down, it tells me it's not only a software error, but some short circuit has happend.
Have you tried a hardreset? search google for your model if you doesn't know how.
From what i can read you still have the CWM Recovery, so download Android-SDK and try flashing the recovery from ADB (Found in platform tools.
Last but most tricky, if nothing helps, you' have to disassemble your device and temporary disable the battery, them press and hold the start button down for 5 sec to remove the poweroverload, reassemble again and try ASB adain, you can't reinstall the recovery directly from the SD
Regards Sc0rpio

samsung galaxy s3 gt-i9300 doesnt boot

EDIT:i installed stock rom again and its working now.but i get a box with yellow text.whats that
?
hello
i am very tired now.i tried everything but got no success
here is what the problem is
While i was using my mobile.it suddenly got switched off and when tried to boot it.it goes into bootloop.i fixed the boot loop but now there is another problem.it doesnt boot.it only shows samsung galaxy s3 and goes black screen
here is what i tried
i flashed s3 frimware and installed it with odin.installed clockworkmod recovery and deleted davik cache and those parts (wipe data etc)
install cynogen mod 12 (idk whats wrong.but the installation hardly takes a minute.its like this
Code:
installing,
updating
done
within less than a minute it shows completed.
i can access recovery mode,download mode.
please help me on how can i start my samsung galaxy s3 gt-i9300
i have tried everything.please suggest me what to do
The yellow window shows factory mode and means, that your efs-data are corrupt: you can switch off this window by deleting the same named app, but you wont get access to any telephone network.
So, if you didn't backup your efs-data, try first repair-function of KIES. If it doesn't help, post the version of firmware, actually is installed.

Categories

Resources