I have an old Galaxy S5 mini (SM-G800F) and recently had to flash a new firmware because it wasn't turning on normally. I flashed the new firmware (pretty sure the right one) with the latest version of Odin, and all proceeded well, until the phone rebooted itself, and there the Samsung logo is flashing. I tried to enter the recovery mode and it worked, i wiped both data anche cache partiton from recovery mode and then rebooted, but it still has the Samsunf logo flashing. Don't know how to fix this, thanks.
Fixed
DaddeRaga said:
I have an old Galaxy S5 mini (SM-G800F) and recently had to flash a new firmware because it wasn't turning on normally. I flashed the new firmware (pretty sure the right one) with the latest version of Odin, and all proceeded well, until the phone rebooted itself, and there the Samsung logo is flashing. I tried to enter the recovery mode and it worked, i wiped both data anche cache partiton from recovery mode and then rebooted, but it still has the Samsunf logo flashing. Don't know how to fix this, thanks.
Click to expand...
Click to collapse
Sorry for bothering you, you can close this thread because the phone just turned on after like 1 hour or even more.
Related
i just woke up to find my galaxy s3 dead.
i tried to power it on, to have the "galaxy s3 i9300" logo starts to blink in a continuous way and no matter what i do the blinking continues in an infinite loop, till i remove the battery and power it on again and same loop of logo blinking again
i did access recovery, change recovery--> same loop
i did install original firmware through download mode that i can also access (via Oddin) --> same loop
i tried to install original firmware by different components methods (via Oddin) but IT FAILED.
i tried philz touch 4 recovery and it works like a charm with back up and restore -> same loop
so, what is the problem and how can i turn around it.
factory reset
Glebun said:
factory reset
Click to expand...
Click to collapse
done, but same blinking bootloop
boot to recovery
wipe data, cache and dalvik
reboot to download mode
flash stock rom.
i might be wrong, but worth a try.
magma2000 said:
done, but same blinking bootloop
Click to expand...
Click to collapse
Superwipe ... put factory rom on there odin and start from scratcg to root then unlock bootloader then flash happy.
Sent From *SynergyRom
It's sds mate get in touch with your provider and they should replace mainboard for you
stupidly will be met by sarcasm
After running out of battery, I'm not able to get my phone up since battery was fully recharged. All I see is the Samsung boot logo which will stay there. The TWRP recovery system remains fully accessible.
I was running ArchiDroid before, now here's the history of things I have tried so far:
1. Removed battery for a while, replugged.
2. Wiped, formatted and reflashed same and different ROM (ArchiDroid again and ParanoidAndroid) with TWRP. No error during flashing.
Still no event after the Samsung boot logo.
Any advice?
Try the rescue firmware & pit, search general forum.
boomboomer said:
Try the rescue firmware & pit, search general forum.
Click to expand...
Click to collapse
Thanks for that idea. I've done so and am now not anymore on the first (Galaxy GT-I9300) boot logo. Now the melody with the fading SAMSUNG logo comes up but doesn't disappear, even after ~2h. Do I have to be afraid that there is a hardware failure?
Boot into recovery and factory reset, or flash stock firmware for your country first.
Look for any errors in recovery.
Hi.
A friend has bought a second hand S6 Edge witch don´t boot. The phone stays in the initial Samsung S6 Edge logo and don´t do anything.
I have flashed tcwm recovery. In the recovery was a message unable to mount /system and unable to mount /data. If have formatted the /data and the message of /data disappeared and the recovery and the pc read the storage.
I flashed the original firmware, and after flashing it the phone reboots, and when the android logo appears and starts loading. At the half of loading appears a message "ERASING..." and then again the fist Samsung logo and there stays freeze. I don´t know why do this and how to do... Any ideas??
I was searching something about but I didn´t find nothing like this case.
Thank you.
it is normal. if you are on 5.1.1 please flash unibase kernel for 5.1.1 if not flash the one for 5.0.2 problem solved
But I don´t understand. When if flash the 5.1.1 firmware I flash the kernel too, it´s included in the new firmware, is´t it?
I´ve installed the 5.1.1 unibase kernell and do the same. Erasing... and in the TCWM appears the message "No OS installed!!". Any ideas?
I don´t know what try.
I have flashed the firmware with Odin that Smart Switch has downloaded and do the same thing. The files I have flashed are:
BL_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
AP_G925FXXU2COH4_CL5599585_QB6038209_REV02_user_low_ship.tar.md5
CP_G925FXXU2COH2_CL5599585_QB5974109_REV02_user_low_ship.tar.md5
CSC_TEF_G925FTEF2COH1_CL5641944_QB6041794_REV02_user_low_ship.tar.md5
In the stock recovery appears the message of the photo.
https:// youtu.be/d3BignvuNfw
****... your imei is gone mate...
install twrp.
have a backup of your phone when you go to recovery again in case if you didnt lose your imei yet.
then go to wipe and advanced wipe then select everything except usb-otg then wipe.
put into download mode and connect smart switch.
recover your phone using emergency recovery.
when it finishes, your phone may have a distorted screen. dont panic.
put it on download mode again
flash 5.1.1 unibase kernel
then you are good to go but your imei is gone probably mate... i feel sorry for you because i have the same issue..
I have a Tmobile GS6 Edge,My problem is this I was restoring a TWRP backup, coming from [ROM][5.1.1][OF8] OZOP EDGE. I used this Backup numerous times. But the last restore sent me into bootloop. I'm on OF8 but I ran an OF6 tar file through odin (it's the only one I can get to pass and run successfully). Heres what happened I connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again. Now I'm stuck in bootloop. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. I force the phone to power off... power on again to bootloops.
smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm lost. I read to reboot to recovery, factory reset in recovery, power down option in recovery but I'm still in bootloop Hell. Just flashed G925TUVU3DOI1 with ODIN, same issue, wont boot past Samsung logo and now I am stuck with OI1 firmware. It will not allow me to downgrade to OF8 or OF6 for example. I have created and flashed successfully my own bootloader.img.tar file with Modem.img.tar.file as suggested. And yes im still stuck at Samsung logo. Any ideas? Please help. Update: I used the emergecy recovery option with Samsung smart switch and..... Blinking logo as usuall
EDIT:i installed stock rom again and its working now.but i get a box with yellow text.whats that
?
hello
i am very tired now.i tried everything but got no success
here is what the problem is
While i was using my mobile.it suddenly got switched off and when tried to boot it.it goes into bootloop.i fixed the boot loop but now there is another problem.it doesnt boot.it only shows samsung galaxy s3 and goes black screen
here is what i tried
i flashed s3 frimware and installed it with odin.installed clockworkmod recovery and deleted davik cache and those parts (wipe data etc)
install cynogen mod 12 (idk whats wrong.but the installation hardly takes a minute.its like this
Code:
installing,
updating
done
within less than a minute it shows completed.
i can access recovery mode,download mode.
please help me on how can i start my samsung galaxy s3 gt-i9300
i have tried everything.please suggest me what to do
The yellow window shows factory mode and means, that your efs-data are corrupt: you can switch off this window by deleting the same named app, but you wont get access to any telephone network.
So, if you didn't backup your efs-data, try first repair-function of KIES. If it doesn't help, post the version of firmware, actually is installed.