I have a Galaxy Alpha model SM-G850M, I rooted it and it worked fine, but a few days later I restarted my device and root was gone, i only had the SuperSu app. So i tried to root it again with odin and the CF Autoroot but id don't worked any more. I nade the wipe data factory reset and tried to root again and it gain failed.
Please help mee!!!!!! :crying:
Sebastian.Peter said:
I have a Galaxy Alpha model SM-G850M, I rooted it and it worked fine, but a few days later I restarted my device and root was gone, i only had the SuperSu app. So i tried to root it again with odin and the CF Autoroot but id don't worked any more. I nade the wipe data factory reset and tried to root again and it gain failed.
Please help mee!!!!!! :crying:
Click to expand...
Click to collapse
With ODIN root and install TWRP. After that flash via TWRP SuperSU flashable ZIP and BusyBox, also flashable ZIP and you should be OK.
UniversalKID said:
With ODIN root and install TWRP. After that flash via TWRP SuperSU flashable ZIP and BusyBox, also flashable ZIP and you should be OK.
Click to expand...
Click to collapse
Thanks, !! I'm gonna try it. But I'm so happy for your answer!!
UniversalKID said:
With ODIN root and install TWRP. After that flash via TWRP SuperSU flashable ZIP and BusyBox, also flashable ZIP and you should be OK.
Click to expand...
Click to collapse
Hello again Universalkid, I tried to do taht but I domn´t know what is a TWRP an how can I flash Supersu via TWRP. Can u explain me how to do the whole process? Please!! Greetings from Switzerland!!
If you don't know what it is, and are too lazy to Google, it means you shouldn't be doing this.
Wysłane z mojego SM-G850F przy użyciu Tapatalka
Sebastian.Peter said:
Hello again Universalkid, I tried to do taht but I domn´t know what is a TWRP an how can I flash Supersu via TWRP. Can u explain me how to do the whole process? Please!! Greetings from Switzerland!!
Click to expand...
Click to collapse
TWRP is a custom recovery. But before you do all that, I suggest you to google all about custom recovery, SuperSU, BusyBox and how to flash ZIP's from TWRP. Read carefully all the instructions and tutorials and only after you done that, go ahead and try it on your phone. This way you will not brick your device. Good Luck.
Re-authentication
I successfully installed TWRP, and after that, I installed SuperSU. I works at first, but after rebooted the device, re-authentication doesn't work. I can still use SuperSU to root apps, but just first time. Not after rebooted.
Related
delete
Biker1bob said:
Hey people,
Rooted using this method http://forum.xda-developers.com/showthread.php?t=1501719 OR
http://www.thespicygadgematics.com/2012/05/root-unroot-samsung-galaxy-s-ii-i9100.html
Worked fine, I have superuser and I have downloaded and done other things that need rooting (unlock)
But when I reboot into recovery I am in stock recovery not CWM.. did I do something wrong?
Thanks
James
Click to expand...
Click to collapse
your link says you have two files. cwm and busybox. did you install both?
even if you have stock recovery, its not an issue as long as you're rooted. If you're going to install a custom kernel, you'll get a custom version of CWM anyways.
Hello Xda forums,
i have been using my device rooted for months succesfully. Now I needed to use Titanium Backup, which did not see my root. So I tried updating my binaries where everything got screwed up. It started not to work and stuff. So I re-rooted my device through Odin again. Now my device is rooted but it does not have SuperSU. When I install SuperSU through Google Play, I get "There is no SU binary installed and SuperSU cannot install it. There is a problem!"
So, I need to remove all current files relating to SU and re-root device through odin again. Or at least i think this would work. Anyways since my roots not working, i can't remove the files, or let any app remove them.
Any help, please?
-Also no personal files or apps should be gone. A way without losing would be grand!
please guys, help me. I need to solve this as soon as possible..
Flash supersu instead of downloading it through play store.
Here is the link : http://forum.xda-developers.com/showthread.php?t=1538053
Fantassy123 said:
Flash supersu instead of downloading it through play store.
Here is the link : http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
How can I flash it? I downloaded the zip, how can i install it through PC odin?
Thanks..
ro xl123 said:
How can I flash it? I downloaded the zip, how can i install it through PC odin?
Thanks..
Click to expand...
Click to collapse
Do you have a custom recovery like CWM, TWRP or 4ext
If yes : Put it on your SD card and reboot into recovery then install from zip, reboot and your done..
If no : Download MobileODIN off play store and follow the instrucion from there..
BTW : Look at the discription on play store your device may not be supported.
Fantassy123 said:
Do you have a custom recovery like CWM, TWRP or 4ext
If yes : Put it on your SD card and reboot into recovery then install from zip, reboot and your done..
If no : Download MobileODIN off play store and follow the instrucion from there..
BTW : Look at the discription on play store your device may not be supported.
Click to expand...
Click to collapse
I do have CWM but never used it so, any further explanation would be appreciated
ro xl123 said:
I do have CWM but never used it so, any further explanation would be appreciated
Click to expand...
Click to collapse
Oh great, makes it much easier.
1.Plug your phone in and transfer the zip file to your SD Card.
2.Reboot into CWM
3.Choose from there Install from zip.
4.Wait till it's done
5.Reboot
6.Enjoy!
A Thanks is appreciated if my answers helped you.
Fantassy123 said:
Oh great, makes it much easier.
1.Plug your phone in and transfer the zip file to your SD Card.
2.Reboot into CWM
3.Choose from there Install from zip.
4.Wait till it's done
5.Reboot
6.Enjoy!
A Thanks is appreciated if my answers helped you.
Click to expand...
Click to collapse
Well that didn't really helped. Done it as you said and SuperSU still says "there is no SU binary installed.."
I tried installing the latest 1.65, should i have tried an older one?
ro xl123 said:
Well that didn't really helped. Done it as you said and SuperSU still says "there is no SU binary installed.."
I tried installing the latest 1.65, should i have tried an older one?
Click to expand...
Click to collapse
No, you don't need a older version.
When reading your first post again, i got a few questions
1. What happened after you tried updating your Binaries?
2. Did you had SU before?
3. Did you fully remove your root or did you just re-root a rooted device?
4. Are you 100% sure you had root before?
Fantassy123 said:
No, you don't need a older version.
When reading your first post again, i got a few questions
1. What happened after you tried updating your Binaries?
2. Did you had SU before?
3. Did you fully remove your root or did you just re-root a rooted device?
4. Are you 100% sure you had root before?
Click to expand...
Click to collapse
1. I tried to update SuperSU through Google Play, and it didn't run succesfully again. (Worst thing i've ever done.)
2. Yep, my device was rooted via CF Auto Root w/ Odin
3. I couldn't really remove my root, since all the ways require to have root before -.-
4. Yep, I was using many apps requiring root without any problem before all this took place..
I think what I need to do is to remove root completely and do it all over again. I can't just factory reset my device, I have lots of files, documents, apps, it would be a pain in the ass
ro xl123 said:
1. I tried to update SuperSU through Google Play, and it didn't run succesfully again. (Worst thing i've ever done.)
2. Yep, my device was rooted via CF Auto Root w/ Odin
3. I couldn't really remove my root, since all the ways require to have root before -.-
4. Yep, I was using many apps requiring root without any problem before all this took place..
I think what I need to do is to remove root completely and do it all over again. I can't just factory reset my device, I have lots of files, documents, apps, it would be a pain in the ass
Click to expand...
Click to collapse
Well there is no other way, Just backup all your files,documents and apps with Carbon,Super backup etc.. And then re-root it.
I tried rooting my S3 using CF-Autoroot, using Odin. After the update CWM doesn't open saying the binaries are outdated and I have to manually reroot. SuperSU doesnt wont even after updating it from play store. Root explorer does not work. I ldo not want to flash a custom rom. Can someone help me find a fix? I am not so experienced when it comes to rooting. I checked various sites and found that the even the buggy MJ9 firmware has the same issue while rooting. Has it go to do with some change in Android 4.3? I flashed back to the stock rom and removed CF-Autoroot for now.
Actually wanted to post this in the thread http://forum.xda-developers.com/showthread.php?t=1957273&page=59 . But I can't seem to post in the Development section with less than ten posts.
Falsh philz recovery & auto root via odin.
Flash the supersu 1.80 cwm file from philz recovery. It will work.
tariq2kn said:
Falsh philz recovery & auto root via odin.
Flash the supersu 1.80 cwm file from philz recovery. It will work.
Click to expand...
Click to collapse
I would like to do this too, can I just confirm I have this correct?
1) Flash Philz recovery using odin
2) Reboot phone in to recovery
3) Flash cf-auto root file from recovery
4) reboot and go in to recovery and flash supersu 1.8 zip file
So two files are flashed using recovery after flashing philz recovery with odin?
Thanks, I fixed it by downloading CF Autoroot again, and wiping my phone in recovery mode to factory defaults, and flashing using odin. It did the tick. . It was mentioned in another thread, but didn't work when I tried. I think the factory reset fixed it. Though I am not sure.
LondonS3 said:
I would like to do this too, can I just confirm I have this correct?
1) Flash Philz recovery using odin
2) Reboot phone in to recovery
3) Flash cf-auto root file from recovery
4) reboot and go in to recovery and flash supersu 1.8 zip file
So two files are flashed using recovery after flashing philz recovery with odin?
Click to expand...
Click to collapse
Flash Philz recovery via odin in download mode.
Flash Cf-Autoroot via odin in download mode.
Reboot to philz recovery & flash supersu 1.80 zip from here.
Thanks, I'll try the same...
Thanks!
I'll try the same, have the same issue like you.
//Jocke
s_ks said:
Thanks, I fixed it by downloading CF Autoroot again, and wiping my phone in recovery mode to factory defaults, and flashing using odin. It did the tick. . It was mentioned in another thread, but didn't work when I tried. I think the factory reset fixed it. Though I am not sure.
Click to expand...
Click to collapse
Did'nt work for me...
It did'nt work for me...
I had to install "PhilZ Touch CWM" and then flash SU and then after upgrade the Super SU, to get it working...
//Jocke
s_ks said:
I tried rooting my S3 using CF-Autoroot, using Odin. After the update CWM doesn't open saying the binaries are outdated and I have to manually reroot. SuperSU doesnt wont even after updating it from play store. Root explorer does not work. I ldo not want to flash a custom rom. Can someone help me find a fix? I am not so experienced when it comes to rooting. I checked various sites and found that the even the buggy MJ9 firmware has the same issue while rooting. Has it go to do with some change in Android 4.3? I flashed back to the stock rom and removed CF-Autoroot for now.
Actually wanted to post this in the thread http://forum.xda-developers.com/showthread.php?t=1957273&page=59 . But I can't seem to post in the Development section with less than ten posts.
Click to expand...
Click to collapse
jsx1 said:
Thanks!
I'll try the same, have the same issue like you.
//Jocke
Click to expand...
Click to collapse
same here CF-Root-SGS3-v6.4.tar via odin not root i9300XXUGMK6 4.3 maybe later i get it fixed and post here
Guys I was trying to root my bro's GS3 with odin.. the flashing went perfect, infact there was a SuperSU and CWM app installed too, but when i tired to open the app it was showing that SU bianary needs to be updated..
I even updated the SuperSU from the Play store but was getting the same error essentially.. also tried the Superuser FIxer app from PS but it also stuck at
Gaining root access :fail
I tried flashing the SuperSU 1.51 .zip from the recovery mode by placing it in internal memory but to my surprise the file path of the internal memory was not visible and when i inserted a sdcard and copied the file to it and then tried to flash it thru recovery, it was successfull but got a few erros , something like who file not successful(will try again and post exact same thing in by tomorrow)
in the meanwhile can anybody help me? plz its urgent..
phone was on stock rom 4.3 OS before root
mods plz move this thread to the QnA section if necessary, i had ticked it while submitting but my browser froze soon after that
If you have philz then there is an option tu reroot it in philz settings... Do that and install supersu from play store and it would adj to update binaries just press normal... Done...
Or the other way is supersu1.93 I'd the latest search fit it's thread download zip and flash through recovery...
Sent from my GT-I9300
kunal1540 said:
If you have philz then there is an option tu reroot it in philz settings... Do that and install supersu from play store and it would adj to update binaries just press normal... Done...
Or the other way is supersu1.93 I'd the latest search fit it's thread download zip and flash through recovery...
Sent from my GT-I9300
Click to expand...
Click to collapse
not sure what is philz.. ya just tried flashing the 1.93 but was getting the same error i posted in first part
E: failed to verify whole-file signature
E: failed to verify whole-file signature
E: signature verification failed
any idea on them? btw thanks for quick reply
shall i reflash the file with odin? please reply?
Krusade said:
shall i reflash the file with odin? please reply?
Click to expand...
Click to collapse
I do not think your ROM is rooted properly. Try to download some software from play store to check whether it is rooted or not.
If not rooted then you have to google and search the rooting process. You have to use computer ODIN to flash and root your phone.
KSKHH said:
I do not think your ROM is rooted properly. Try to download some software from play store to check whether it is rooted or not.
If not rooted then you have to google and search the rooting process. You have to use computer ODIN to flash and root your phone.
Click to expand...
Click to collapse
it isnt rooted.. cause none of the app can acquire the root permission.. thought the SU app is still there.. my question right nw is shall i reflash the same file?
Krusade said:
it isnt rooted.. cause none of the app can acquire the root permission.. thought the SU app is still there.. my question right nw is shall i reflash the same file?
Click to expand...
Click to collapse
Having SU app does not mean your phone is rooted. Thats just an front end to provide you root access. Your phone has to be properly rooted.
Follow this:-
http://androidcentral.us/2014/01/root-samsung-galaxy-s3-gt-i9300/
KSKHH said:
Having SU app does not mean your phone is rooted. Thats just an front end to provide you root access. Your phone has to be properly rooted.
Follow this:-
http://androidcentral.us/2014/01/root-samsung-galaxy-s3-gt-i9300/
Click to expand...
Click to collapse
ya i know its not rooted as i cant get the root access, my question is that shall i directly try to reflash thru odin?
Do you have a custom recovery? Did you flash cf-auto root? Philz touch is a custom recovery based on cwm. Flash that with odin, go to philz settings and then re-root system.
Krusade said:
Guys I was trying to root my bro's GS3 with odin.. the flashing went perfect, infact there was a SuperSU and CWM app installed too, but when i tired to open the app it was showing that SU bianary needs to be updated..
I even updated the SuperSU from the Play store but was getting the same error essentially.. also tried the Superuser FIxer app from PS but it also stuck at
Gaining root access :fail
I tried flashing the SuperSU 1.51 .zip from the recovery mode by placing it in internal memory but to my surprise the file path of the internal memory was not visible and when i inserted a sdcard and copied the file to it and then tried to flash it thru recovery, it was successfull but got a few erros , something like who file not successful(will try again and post exact same thing in by tomorrow)
in the meanwhile can anybody help me? plz its urgent..
phone was on stock rom 4.3 OS before root
Click to expand...
Click to collapse
The simplest place to start is a root checker app (just stick root checker into play store). If it says that you don't have root then you don't simple as that. In which case use CF-AutoRoot program on your pc which will flash both a Custom Recovery (clockworkmod) as well as root... after that, the world is your oyster...
The root checking app is the simplest way to check if you have root though if you're new to stuff like this.
wangdaning said:
Do you have a custom recovery? Did you flash cf-auto root? Philz touch is a custom recovery based on cwm. Flash that with odin, go to philz settings and then re-root system.
Click to expand...
Click to collapse
i'm not sure if its a custom recovery or a stock one, will have to check.. will check and report back by monday.. will also try what @pjcarrmole said... thanks both of you.. will report back..
Krusade said:
i'm not sure if its a custom recovery or a stock one, will have to check.. will check and report back by monday.. will also try what @pjcarrmole said... thanks both of you.. will report back..
Click to expand...
Click to collapse
I am sure you were using stock, based on the OP. Get the custom and have a go. If you flash auto root it will give you stock recovery. You need to check philz or cwm threads for the odin flashables.
I had flashed cm13 in my moto e and installed superSU. When i open superSU , it asks me to select the method to update the binary. I chose "normal". It failed. And asked me to try again after reboot. That too failed. Due to this issue i am unable to use foldermount . Is there any solution?
haribalaji said:
I had flashed cm13 in my moto e and installed superSU. When i open superSU , it asks me to select the method to update the binary. I chose "normal". It failed. And asked me to try again after reboot. That too failed. Due to this issue i am unable to use foldermount . Is there any solution?
Click to expand...
Click to collapse
Use version 2.65 or 2.67 (BETA) - It will use the system-less install (means it can be uninstalled from the Apps list).
Also when you flash the new nightlies, be sure to flash the SuperSU zip in recovery again, or else the error which u said earlier might crop up again.
NB: Do Not click on update binaries (normal or any other method, because that might cause issues which prevents the device from booting... I know this, because I myself have faced such problems earlier)
Bootloop while flashing superSU update zip
I tried flashing UPDATE-SuperSU-v2.46.zip using TWRP(checked mount-> system)
which made the device in the bootloop. Then i had to restore my backup to unbrick the device. So can you explain step by step how to update su binary?
haribalaji said:
I tried flashing UPDATE-SuperSU-v2.46.zip using TWRP(checked mount-> system)
which made the device in the bootloop. Then i had to restore my backup to unbrick the device. So can you explain step by step how to update su binary?
Click to expand...
Click to collapse
Super SU 2.46 was built only for Lollipop ROMs.
Use SuperSU 2.65 or higher
Steps to install after a clean flash of the ROM:
In the Recovery, flash the SuperSU zip
First the phone will boot incompletely (not for all users though), then will boot normally... don't be afraid
You're done!!!
Steps to be followed while flashing new nightlies:
DON'T update automatically from CM Updater
Download the new zip of CM 13, and go to recovery
Wipe Dalvik/ART Cache and Cache only (Nohting else)
Flash the ROM
Flash the SuperSU zip
You're ready to reboot to the new nightly
Hope this helps
Rohitagni said:
Super SU 2.46 was built only for Lollipop ROMs.
Use SuperSU 2.65 or higher
Steps to install after a clean flash of the ROM:
In the Recovery, flash the SuperSU zip
First the phone will boot incompletely (not for all users though), then will boot normally... don't be afraid
You're done!!!
Steps to be followed while flashing new nightlies:
DON'T update automatically from CM Updater
Download the new zip of CM 13, and go to recovery
Wipe Dalvik/ART Cache and Cache only (Nohting else)
Flash the ROM
You're ready to reboot to the new nightly
Hope this helps
Click to expand...
Click to collapse
I've installed superSU 2.65 from play store. Since you insist i will try flashing the latest version. Should i tick "mount->system" in twrp before flashing?
haribalaji said:
I've installed superSU 2.65 from play store. Since you insist i will try flashing the latest version. Should i tick "mount->system" in twrp before flashing?
Click to expand...
Click to collapse
Don't install from Play Store....
I'm sorry... I forgot to mention that
Always flash the zip.... and u donot need to mount system
Rohitagni said:
Don't install from Play Store....
I'm sorry... I forgot to mention that
Always flash the zip.... and u donot need to mount system
Click to expand...
Click to collapse
Thanks Rohitagni . I will follow your instructions and get back to you after flashing the zip.
Rohitagni said:
Don't install from Play Store....
I'm sorry... I forgot to mention that
Always flash the zip.... and u donot need to mount system
Click to expand...
Click to collapse
Wow.. I followed your instructions and it worked like a charm. Thanks.
haribalaji said:
Wow.. I followed your instructions and it worked like a charm. Thanks.
Click to expand...
Click to collapse
No worries bro... Glad it worked