This is CM12.1 (Lollipop, Android 5.1.1) firmware for Moto MAXX XT1225 and Droid Turbo XT1254. It's an official build.
Maintainers: Skrilax_CZ
Credits: CyanogenMod Team
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Known bugs
Wake by voice support not tested and has unknown status
Support for XT1250 may require tweaking
VoLTE is not supported on Verizon
Source
Device: https://github.com/CyanogenMod/android_device_motorola_quark
Kernel: https://github.com/CyanogenMod/android_kernel_motorola_apq8084
Unlocked bootloader required!
Flash over latest Lollipop stock SW or flash the following packages to update bootloader & radio!
Droid Turbo XT1254 supports starts with 11/29 nightly! Do not flash previous builds.
Radio & Bootloader packages
XT1225 5.0.2 RETBR (LXG22.33-12.13): http://skrilax.droid-developers.org/cm12quark/QUARK_RETBR_502_RADIO_AND_BOOTLOADER_PACKAGE.zip
XT1225 5.0.2 RETEU INDIA (LXG22.33-12.11): http://skrilax.droid-developers.org/cm12quark/QUARK_RETEU_502_RADIO_AND_BOOTLOADER_PACKAGE.zip
========================================================================================================================
XT1225 5.0.2 RETBR (LXG22.33-12.16): http://skrilax.droid-developers.org/cm12quark/QUARK_RETBR_502_RADIO_AND_BOOTLOADER_PACKAGE_2.zip
XT1225 5.0.2 RETEU INDIA (LXG22.33-12.16): http://skrilax.droid-developers.org/cm12quark/QUARK_RETEU_502_RADIO_AND_BOOTLOADER_PACKAGE_2.zip
========================================================================================================================
XT1250 5.0.2 LRA (LXG22.33-12.27): http://skrilax.droid-developers.org/cm12quark/QUARK_LRA_502_RADIO_AND_BOOTLOADER_PACKAGE.zip
========================================================================================================================
XT1254 5.1 VERIZON (SU4TL-44_44): http://skrilax.droid-developers.org/cm12quark/QUARK_VRZ_511_SU4_RADIO_AND_BOOTLOADER_PACKAGE.zip
Flash steps after you extract the zip:
Code:
adb reboot bootloader
mfastboot flash partition gpt.bin
mfastboot flash motoboot bootloader.img
mfastboot flash radio radio.img
Crossflashing & Configuration Override
You can crossflash radio image for a different variant of the phone, but the automated setup will not pick it up. Thus you'll need to manually override it through fastboot:
Code:
To enable autodetection:
fastboot oem config fsg-id ""
----------------------------------------
Moto Turbo XT1225:
fastboot oem config fsg-id emea
----------------------------------------
Moto MAXX XT1225:
fastboot oem config fsg-id singlela
----------------------------------------
Moto MAXX XT1250:
fastboot oem config fsg-id lra
----------------------------------------
Moto MAXX XT1250 - but set as GSM phone:
fastboot oem config fsg-id lra_gsm
----------------------------------------
Droid TURBO XT1254:
fastboot oem config fsg-id verizon
----------------------------------------
Droid TURBO XT1254 - but set as GSM phone:
fastboot oem config fsg-id verizon_gsm
Download!
ROM & Recovery: http://download.cyanogenmod.org/?device=quark
GAPPS: http://d-h.st/BX7Q, http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Sweet!
Awesome
But without VoLTE, does that mean we cant use simultaneous voice/data for now? Or is the Turbo able to do LTE on one and 3G (or even 1x) on another radio?
EDIT: Never mind.
VoLTE is not supported for now, so no calls & data at the same time. As of now, VoLTE is harder to integrate properly, due to it's proprietary nature.
Skrilax_CZ said:
VoLTE is not supported for now, so no calls & data at the same time. As of now, VoLTE is harder to integrate properly, due to it's proprietary nature.
Click to expand...
Click to collapse
So it's more than just having the MyVerizon app?
Skrilax_CZ said:
VoLTE is not supported for now, so no calls & data at the same time. As of now, VoLTE is harder to integrate properly, due to it's proprietary nature.
Click to expand...
Click to collapse
Hey @Skrilax_CZ, take a look at this?
http://forum.xda-developers.com/showpost.php?p=64088717&postcount=273
and this
http://forum.xda-developers.com/droid-turbo/help/phone-service-flashing-rr-cm12-1-t3260228
ChazzMatt said:
Hey @Skrilax_CZ, take a look at this?
http://forum.xda-developers.com/showpost.php?p=64088717&postcount=273
and this
http://forum.xda-developers.com/droid-turbo/help/phone-service-flashing-rr-cm12-1-t3260228
Click to expand...
Click to collapse
@baybutcher27 what is the patch you use for VoLTE?
Skrilax_CZ said:
@baybutcher27 what is the patch you use for VoLTE?
Click to expand...
Click to collapse
BTW on RR CallRec don't work, just like I have test in the past, If is working on CM let me know, I click recording get a error and a empty file is created, maybe is something related to voice files from the kernel or permissions don't really know about it, there is a xposed module that enables it I cant test without enable it on the tree, but I enable on the tree to test and no good.
To enable VoLTE on the ROM I use this.
https://github.com/bhb27/android_de...mmit/fb40a6d5158cc3922489cc3b0e1e12e3ecc3a278
Is probably only necessary the commit above but...
One week ago I have included all vendor files from su44, I know don't need them all (fw and others), but I prefer like this. If the vendor did it is probably those *ims* files, but I did not included ims.apk.
https://github.com/bhb27/proprietary_vendor_motorola/commit/c5139f037b0a4e528cf704ca2e144c3688c727af
changes to the device proprietary/vendor:
https://github.com/bhb27/android_de...mmit/f56603e03bd60a75ac967627f09cbcf5e7a1de6f
On device tree I have update and add some audio/mixer files don't know if that helps, if they do, look for commits from 11/23 and up on the device tree RR, all from su44.
Some have a VoLTE setting like this one:
https://github.com/bhb27/android_de...mmit/d1b503a670fa7e67f861d2df4c79cb20add8a8bd
---------- Post added at 03:16 PM ---------- Previous post was at 03:11 PM ----------
@Skrilax_CZ
and that cid, verizon is a mess, they have 0x0, 0x2 and 0x4... 0xDEAD
I am on the 11/29 nightly and everything is working. However, my biggest battery drain, aside from screen, is Cell Standby and I'm getting about 45% time without a signal. Is there anything that I can do to correct this?
So I am running CM 12.1 as my daily driver, I'm on nightly 11/29. I have noticed some things. First my phone runs fast as all hell, very responsive. Second I seem to have developed a new spot which gets warm under heavy use. On Mofo rooted ComputerFreek build the center of the back, just over the battery would get warm during heavy use or charging, now it's the center bottom, just over the Droid logo. Third my phone can and will literally go for several hours (at least 3) using only 1% of the battery if I have my radios off,active display on and brightness set to auto. If I am using the phone then the battery starts to drop pretty quickly, bit I can still squeeze out 2+ days with it, no question. Just a little feedback, thanks for the ROM!
Is it possible you weren't using high accuracy location in the old ROM?
Sent from my DROID Turbo using XDA Free mobile app
VoLTE
Quick question about VoLTE: I realize there's a patch available, but is that something we can apply to the phone, or will it require a recompiled system apk?
To flash the new nightly builds on my droid Turbo xt1254 do i need anything other than the system image? I know a couple older builds worked with custom kernel but I'm unsure if that's still necessary for builds past 11/29?
It is no longer necessary.
Sent from my DROID Turbo using XDA Free mobile app
Anyone having low sound issues with this ROM?
Sent from my XT1254 using Tapatalk
tecsironman said:
Anyone having low sound issues with this ROM?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/moto-maxx/development/motomaxx-volume-mod-t3019203
Seems to work on CM12.1 not sure about RR though.
The kernel app I used has a volume option you can enable in it.
Flash the baybutcher kernel and install kernel adiutor from play store and set the audio higher.
(I question the need for the kernel for this but if you're going to install kernel software might as well.)
Sent from my XT1254 using XDA Free mobile app
Is there any way to flash it with twrp on droid turbo? I have all the images in my downloads folder, but is there something special that I have to do besides just flashing the 3 zips?
You might immediately before hand get a GPS lock. Seems to help get the GPS working in cm12. But this is what I would do.
Wipe in twrp, (data, cache, dalvik) install cm12.1, install gapps, kernel if you want, then wipe in twrp again.
Related
As good a place as any to post this.
Pio-masaki.com is being shut down due to a Cease and Desist order sent against the host by Google and homeland security. I have no idea why, however until this is sorted out, and to avoid any possible or further legal issues, the site is down for a period of time that can be a day or forever. This includes any and all ROMs, kernels, gapps packages, for any and all devices, that were hosted on pio-masaki.com.
I apologize in advance for this as I know some ROMs are only available at pio-masaki.com, but it is out of my hands, the host has to consider their own safety, and has my 100% agreement and backing in taking down the site until the matter is resolved.
As this is a very large matter, and one that has us incredibly scared, I'm retreating from android for the time being, until I know what it was that I did that was illegal, and may return once this is cleared up and blows over.
After this is cleared up the hosting for pio-masaki.com may still remain offline as the hoster has some personal issues with me at this point and may or may not continue to host for me, should we resolve our differences it may return.
If by some chance Google or whoever sent the C&D notices this, I urge you to contact me as I was responsible for what was hosted, and would genuinely like to know what the issues are so we can get them resolved immediately.
I will be making similar postings or editings to any other ROM threads that link to pio-masaki.com.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
================================================== =====================
About MoKee OpenSource
MoKee opensource is an Android branch based on the the Google AOSP & CyanogenMod 10.2 source development, but also the first full open source Android project, users and developers at home and abroad.
Project is open source, any interested technical experts can participate in the development of its contribution to the force!
================================================== =============================
Forum: http://bbs.mfunz.com
Guide: http://bbs.mfunz.com/thread-653126-1-1.html
Statistics: http://stats.mfunz.com
Review: http://review mfunz.com
Bug Tracker: http://issues.mfunz.com/
Bug Tracker Mobi: http://issues.mfunz.com/mobi
Source: https://github.com/MoKee
================================================== =============================
Disclaimer: All the firmware, custom ROMs, official firmware updates, mods and tools mentioned here belong to their respective developers/owners. You will be doing everything at your own risk. We or the developers cannot be held responsible if you end up damaging or bricking your device.
================================================== =============================
FEATURES:
Halo
SELinux support
All like Android 4.3
PIE CONTROLS
Mokee transitions
Mokee notepad
Mokee market
and more
REQUIREMENTS:
Rooted and unlocked
S-Off optional but encouraged for ease of installation
CWM, TWRP or other custom recovery installed
INSTALLATION:
Download zip and place onto your device or USB drive or PC for adb sideload
Boot into your custom recovery
Flash/install ROM zip
Flash matching Gapps package (4.3 version)
Wipe dalvik cache, cache, data (factory reset)
Reboot
Allow a few minutes for first boot
Scroll down and select English (or your preferred language)
Setup as normal and enjoy!
WORKING:
Everything to some extent
NOT WORKING:
Nothing ROM specific
BUGS:
Camera does not fully focus (only close)
GPS may not work, if so you'll need to flash a sense ROM, get a lock, then, without powering down, reboot into recovery and flash or restore, then it will work
Amps are either not working, or not working correctly
Google Voice will randomly ignore input from the MIC
CHANGE LOG:
9.14.13:
Initial released build
Current device/vendor tree
M7 kernel based
Global, no need for CDMA or GSM builds
9.18.13:
Updated MoKee source
QCOM keystore implemented
kernel source used https://github.com/CyanogenMod/android_kernel_htc_m7
XDA:DevDB Information
mokee os, a ROM for the HTC Droid DNA
Contributors
pio_masaki, http://forum.xda-developers.com/member.php?u=4630655, MoKee Open Source
ROM OS Version: 4.3.x Jellybean
Based On: CM10.2
Version Information
Status: Alpha
Created 2013-09-15
Last Updated 2013-12-12
Reserved
TIPS:
CDMA vs GSM in a Global ROM
CDMA Users, visit settings > Wireless & networks > more > Mobile networks and select the following:
Network Mode = LTE/CDMA/EvDo
System select = Automatic
CDMA Subscription = RUIM/SIM
If you are having issues with CDMA, try this trick
http://forum.xda-developers.com/showthread.php?p=45654080
GSM users, visit settings > Wireless & networks > more > Mobile networks and select the following:
Network Mode = GSM/WCDMA preferred
System select = Automatic
CDMA Subscription = RUIM/SIM
If there are issues using GSM on the Global ROM setup, I'll go back to making a GSM specific version if needed (APN settings are missing, so this may cause problems)
LANGUAGE:
The ROM is Asian, as such its native language is Chinese, this can be changed immediatly as the first screen offers you a scrolling list of available languages. This is a very international ROM, with a huge variety of languages, just scroll down or up to your preferred language and the ROM will then run in that language.
Reserved
DOWNLOAD:
You can get the ROM HERE
You can get Gapps HERE or at your usual locations like goo.im
First does mokee have appbar?
munchy_cool said:
First does mokee have appbar?
Click to expand...
Click to collapse
No sir, its basically a lightweight ROM with only a few additions, its actually the first ROM to appear with Listview animations that are now in every other ROM out there. They also have a mod to the recent apps list that now appears in PAC, and maybe other ROMs as well. Its based on CM10.2 and contains the mods for that, plus PIE, HALO, Listview animations and some other features tucked in there.
Cool...Thanks and Thanks on your awesome work I guess I prefer ChaOS
munchy_cool said:
Cool...Thanks and Thanks on your awesome work I guess I prefer ChaOS
Click to expand...
Click to collapse
That's why I offer a variety of ROMs, I think I've covered every option and choice in the ROMs I've made available, feel free to enjoy whatever you want, even if i didn't make it :silly:
I've heard a lot of good things about MoKee, but I've tried one of your previous releases as well as others for different devices and everything's always been in pure Chinese without giving me the normal option to change it in initial setup (or maybe I missed it since I can't read Chinese, haha), so is this in English? I'd like to check it out in full English, but as a minimalist, I don't like having all the other (Chinese specific, useless to me) pre-configured stuff like baidu loaded up. It seems like a neat ROM to check out, but personally I'd be curious to see if anyone mods it more for global use.
Edit: I know it's not gonna be perfect, but I was wondering if this was still considered beta or is it "stable" now?
pyroguysf said:
I've heard a lot of good things about MoKee, but I've tried one of your previous releases as well as others for different devices and everything's always been in pure Chinese without giving me the normal option to change it in initial setup (or maybe I missed it since I can't read Chinese, haha), so is this in English? I'd like to check it out in full English, but as a minimalist, I don't like having all the other (Chinese specific, useless to me) pre-configured stuff like baidu loaded up. It seems like a neat ROM to check out, but personally I'd be curious to see if anyone mods it more for global use.
Edit: I know it's not gonna be perfect, but I was wondering if this was still considered beta or is it "stable" now?
Click to expand...
Click to collapse
Read the second post, I addressed languages, you can run it in English it's always been an option in the setup. This ROM is the definition of a Global ROM, it has probably every language android has available as an option, and runs on CDMA and gsm carriers.
Its been stable for some time now, but with the switch to the M7 kernel and its steps backwards I've marked it alpha again, when the M7 base is back to where the DLX kernel used to be, it'll go back to beta.
Tapatalked from my HTC DNA
pio_masaki said:
Read the second post, I addressed languages, you can run it in English it's always been an option in the setup. This ROM is the definition of a Global ROM, it has probably every language android has available as an option, and runs on CDMA and gsm carriers.
Its been stable for some time now, but with the switch to the M7 kernel and its steps backwards I've marked it alpha again, when the M7 base is back to where the DLX kernel used to be, it'll go back to beta.
Tapatalked from my HTC DNA
Click to expand...
Click to collapse
MoKee got me off carbon. Running mokee on my DNA and nexus 7 now. English definitely works fine on everything except that market app that comes with it...
I got a lot of random reboots on the latest build I did with the m7 kernel. Anyone else got that or was my build a little off?
Went back to an earlier build and it's running fine.
Sent from my HTC6435LVW using xda app-developers app
danjull said:
MoKee got me off carbon. Running mokee on my DNA and nexus 7 now. English definitely works fine on everything except that market app that comes with it...
I got a lot of random reboots on the latest build I did with the m7 kernel. Anyone else got that or was my build a little off?
Went back to an earlier build and it's running fine.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
If its everytime you turn off the screen or the screen powers off, its your build. Try mine and see if it happens, if it doesn't, I can correct that for you. While mokee seems to have the dlx in their sources, it's broken so I doubt it's actually maintained by anyone that builds or uses it. I don't use their trees I use my own, got tired of correcting the same mistakes over and over again
Edit: I sent a pull request to correct that, you can see it here https://github.com/MoKee/android_device_htc_dlx/pull/4 and you can easily implement it yourself.
pio_masaki said:
If its everytime you turn off the screen or the screen powers off, its your build. Try mine and see if it happens, if it doesn't, I can correct that for you. While mokee seems to have the dlx in their sources, it's broken so I doubt it's actually maintained by anyone that builds or uses it. I don't use their trees I use my own, got tired of correcting the same mistakes over and over again
Edit: I sent a pull request to correct that, you can see it here https://github.com/MoKee/android_device_htc_dlx/pull/4 and you can easily implement it yourself.
Click to expand...
Click to collapse
Are you sure that this was a problem and not a bandaid? Are they using the right vendor tree (TheMuppets)? Your fix and the description of the problem, sound like you / MoKee may be missing this commit from the vendor tree.
crpalmer said:
Are you sure that this was a problem and not a bandaid? Are they using the right vendor tree (TheMuppets)? Your fix and the description of the problem, sound like you / MoKee may be missing this commit from the vendor tree.
Click to expand...
Click to collapse
Oh its certainly a bandaid, but why is our vendor on something with muppets and not either chads or cm's? No wonder everyone missed it.
Anyways that got the builds running until I could figure it out, which you just did for me lol
Tapatalked from my HTC DNA
Pio trying a clean lash and don't seam to have that first screen to choose English. Any ideas?
mopartonyg said:
Pio trying a clean lash and don't seam to have that first screen to choose English. Any ideas?
Click to expand...
Click to collapse
Flashing a 4.3 gapps too? Its the first screen of setup which only shows up if gapps is installed.
Tapatalked from my HTC DNA
pio_masaki said:
Flashing a 4.3 gapps too? Its the first screen of setup which only shows up if gapps is installed.
Tapatalked from my HTC DNA
Click to expand...
Click to collapse
I knew that, Duh. Sorry for the wasted post. But thanks for the quick answer and all your hard work
mopartonyg said:
I knew that, Duh. Sorry for the wasted post. But thanks for the quick answer and all your hard work
Click to expand...
Click to collapse
NP, it happens.
Tapatalked from my HTC DNA
pio_masaki said:
NP, it happens.
Tapatalked from my HTC DNA
Click to expand...
Click to collapse
Update:
Updated MoKee source
QCOM keystore implemented
Untested, reports welcome.
pio_masaki said:
Update:
Updated MoKee source
QCOM keystore implemented
Untested, reports welcome.
Click to expand...
Click to collapse
Running smooth. Only issue so far is the same as I had with my build. On first boot aosp keyboard force closes. Gotta skip signing in and change the keyboard.
Edit: It reboots when turning the screen on.
Sent from my HTC6435LVW using xda app-developers app
danjull said:
Edit: It reboots when turning the screen on.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Did you do a clean flash (wipe data, dalvik, cache, system and no app and data restore)? The new change is uppoed to get rid of the reboot when turning on the screen.
Lin·e·age
/ˈlinēij/
noun1.lineal descent from an ancestor; ancestry or pedigree.
2.a sequence of species each of which is considered to have evolved from its predecessor.Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Since I'm addicted to Xposed Framework and CM13 builds are discontinued I decided to build new LOS13 myself. At the beginning this project was just vanilla LOS13 without any addons or patches built from official LOS13 github, with time I applied few patches and performance improvement like UKSM, ZRAM and many others tweaks.
You can flash it on top of CM13 build.
Contributors
invisiblek, Hashbang173
Source code: http://github.com/lineageos
Kernel source code: https://github.com/QBANIN/kernel_motorola_msm8992
ROM OS Version: 6.x Marshmallow
Version Information
Status: Nightly
Changelog
Last build date: 2018-11-14
Download
Does this come with or without root preinstalled? The Lineage 14.1 builds for this device come without root (but can be rooted with a separate zip if desired) and it passes Safety Net checks for those of us that like to play Pokemon or use Android Pay.
I upgraded my last CM13 to LOS13 and it's still rooted (SuperSu). You have to try clean install yourself, but I'm pretty sure LOS13 is pre-rooted just like CM13 was.
Build 2/13 online.
- fixed flashlight bug
Screenshoots???
core720 said:
Screenshoots???
Click to expand...
Click to collapse
Read first post...
Build 2/15 online.
Build 2/20 online.
Build 2/21 online. Compiled with custom flags for better performance.
This is the best custom ROM for this phone in my opinion. Good work!
Build 2/21 online.
Build 3/13 online. February 2017 security updates.
QBANIN said:
Build 3/13 online. Security updates.
Click to expand...
Click to collapse
This is the best daily driver for my phone because: setting APN is not broken on this ROM so it enabled me to switch from Ringplus to Total wireless, and because I can use xposed with it.
Only problem I had is finding the lineageOS file that works to add root access (the one I tried did not work after I flashed)
Sent from my Nexus 7 using Tapatalk
loudcloud54 said:
This is the best daily driver for my phone because: setting APN is not broken on this ROM so it enabled me to switch from Ringplus to Total wireless, and because I can use xposed with it.
Only problem I had is finding the lineageOS file that works to add root access (the one I tried did not work after I flashed)
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Try this https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
QBANIN said:
Try this https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Click to expand...
Click to collapse
Thank you very much! Worked like a champ.
Sent from my Nexus 7 using Tapatalk
Experimental build 3/13 v3 online.
Added UKSM support enabled by default.
Experimental build 3/16 online.
ZRAM tweaks + enabled by default.
Super fast and snappy
Great
QBANIN said:
Experimental build 3/16 online.
ZRAM tweaks + enabled by default.
Super fast and snappy
Click to expand...
Click to collapse
I am tempted, gonna try it first thing tomorrow morning
Thanks for that rom! It's working great and fast, also the last experimental build 3/16! That's what I was looking for, stable and updated
Thanks for the great work
Sent from my XT1572 using XDA-Developers Legacy app
Why this thread is in General section?
This is AOSP for Sony Xperia XZ1 (Poplar) (G8341)
SonyAosp build will always mainly based on AOSP with some Material stuff
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlock Bootloader
Please if you have Locked Bootloader you may check this http://developer.sonymobile.com/unlockbootloader/
Code:
WORKING
- RIL
- Mic
- Sound (Speaker and Headset)
- LED
- Thermal Manager
- Audio and Video Decoders/Encoders
- Camera (WIP)
- Recovery (Only for flash signed zips)
XDA:DevDB Information
[Oreo 8.1.X][XZ1 - G8341] Android Open Source Project, ROM for the Sony Xperia XZ1
Contributors
davidteri91
Source Code: http://Github.com/SonyAosp
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Stable
Created 2018-03-25
Last Updated 2018-03-25
Download
Follow me for be adviced for new builds
This ROM has included GAPPS
Steps for Flash
Code:
[FONT="Arial"][SIZE="3"] fastboot flash oem xxxxx.img [/SIZE][/FONT]
[FONT="Arial"][SIZE="3"] fastboot flash vendor vendor.img [/SIZE][/FONT]
[FONT="Arial"][SIZE="3"] fastboot flash boot boot.img [/SIZE][/FONT]
[FONT="Arial"][SIZE="3"] fastboot flash recovery recovery.img [/SIZE][/FONT]
[FONT="Arial"][SIZE="3"] fastboot flash system system.img [/SIZE][/FONT]
[FONT="Arial"][SIZE="3"] fastboot flash userdata userdata.img [/SIZE][/FONT]
Please make sure your device is updated to latest sony software present on flashtool due to loader requeriments
To flash oem partition you should download odm.img from https://developer.sony.com/develop/open-devices/latest-updates/
You don't need flash userdata everytime .... only first time ..... userdata.img will wipe your data... you may be adviced
Hello, is the fingerprint sensor working on this build? Thank you
Thank you for your work and providing us with AOSP. Is there a build coming for the G8342 Dual?
Yeaaaah boiisss! Now we get full worki aosp! Thank u brother!
Jenkins started new build ... Release probably tonight ... Follow me to get the news .... Stay tuned
Sent from my Xperia XZ1 (AOSP) using Tapatalk
some screens ?
davidteri91 said:
Jenkins started new build ... Release probably tonight ... Follow me to get the news .... Stay tuned
Sent from my Xperia XZ1 (AOSP) using Tapatalk
Click to expand...
Click to collapse
Twitter?
Fingerprint working
Micro SD working
Sony's aosp not support over iso 800(uditrawat's build can install magisk module to use high iso. but install on this build 'camera stopped'
kojak1989 said:
some screens ?
Click to expand...
Click to collapse
Here you go...
Everything's great so far, camera's fine, fingerprint's fine as well.
Just remember to register your device as a certified device for Google services.
SirHydarnes said:
Here you go...
Everything's great so far, camera's fine, fingerprint's fine as well.
Just remember to register your device as a certified device for Google services.
Click to expand...
Click to collapse
System Apps are from aosp oraz Google? Can you make screenshot from app drawer?
Is the fingerprint scanner working consistently? For me it says hardware not found after a few uses and it takes forever to scan my finger.
Bugs?
kojak1989 said:
System Apps are from aosp oraz Google? Can you make screenshot from app drawer?
Click to expand...
Click to collapse
Yes it comes with preloaded gapps. Minimal but efficient, it also includes google's setup wizard. Doesn't include the pixel live wallpapers. I'm working on a Flashable pack that flashes the necessary google stuff like the blue theme that can't be found in Gapps. As for gapps, I suggest you either flash aroma gapps and set it not to flash camera, or just not flash gapps since the builds include google camera and it's working just fine.
GaM3RAndroidIOS said:
Bugs?
Click to expand...
Click to collapse
From what I can gather, a bug exists and my guess is that it is because fingerprint wake and unlock is enabled. It's a feature that keeps the fingerprint sensor on when the screen is off and if you just touch the sensor without turning the screen on, the device automatically turns on unlocked. I tried finding a way to disable it but had no luck. If you try unlocking when the screen is off(touch the sensor) a few times the screen won't turn on and a force reboot is needed.
Another bug, or just a glitch is in the ui where toast messages(notifications) background color ia changed from white which is the default color to black but the text is still black and the padding in the box is more than usual.
Other than that, everything's working for me.
I've installed the march 27th build + supersu and opengapps stock and my own pack that I mentioned.
I've been waiting for a build like this and I'm keeping it on my device.
Also, one thing I noticed was that there is no battery tile, in fact there is one embedded into SystemUI but it seems to be replaced with a battery saver tile instead which is useless. I hope I either find the time to solve these problems or someone else does.
Either way, huge thanks to OP.
Thankyou very much!!!
This is my best phone so far!!
Bugs and bugs and bugs !
Sorry but since i installed your image, i keep on having bugs !
First, fingerprint is not working (works at first boot then not functionnal after a short time)
Secondly, the phone crashes all the time so i have to reboot it several times a day.
I also noticed a weird effect on the ear speaker. when i talk to my friends, i can hear myself out of the speaker. Very annoying and irritating !
I am more than surprised that no one talks about theses stuffs ...
Klonoa76 said:
Sorry but since i installed your image, i keep on having bugs !
First, fingerprint is not working (works at first boot then not functionnal after a short time)
Secondly, the phone crashes all the time so i have to reboot it several times a day.
I also noticed a weird effect on the ear speaker. when i talk to my friends, i can hear myself out of the speaker. Very annoying and irritating !
I am more than surprised that no one talks about theses stuffs ...
Click to expand...
Click to collapse
You know right that this ROM is still in the stable beta stage, and that your issues is related to lack of 100% configured & enhanced drivers from the AOSP device tree for the MSM8998 chipset (this is purely at Qualcomm and Sonys end).
This ROM is pretty much stable as it is, for now. So.
xFirefly93 said:
You know right that this ROM is still in the stable beta stage, and that your issues is related to lack of 100% configured & enhanced drivers from the AOSP device tree for the MSM8998 chipset (this is purely at Qualcomm and Sonys end).
This ROM is pretty much stable as it is, for now. So.
Click to expand...
Click to collapse
Be sure i appreciate the work you've done on this release but sorry i can't consider the rom stable regarding all the stuffs i related.
What do you think about the crashes ? Is there a workaround to fix this ?
Thanks
Klonoa76 said:
Be sure i appreciate the work you've done on this release but sorry i can't consider the rom stable regarding all the stuffs i related.
What do you think about the crashes ? Is there a workaround to fix this ?
Thanks
Click to expand...
Click to collapse
What crashes are you talking about?
xFirefly93 said:
What crashes are you talking about?
Click to expand...
Click to collapse
After a while, i can't turn the screen on. No response at all. So i have to press Vol up + Power button to switch off the phone and restart it afterwards.
Am i the only one to experience such issues ???
crDroid v5.6
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is crDroid ROM v5.6 Pie based/compiled using LineageOS sources from @YashGarg10 and @Harry8242. All the credits goes to these awesome developers. And of course, to the previous ones who have done every work on this device.
Current Status: Testing
What's Working/Not Working
Phone
Data
WiFi
Camera
Video Recording
and other normal day to day stuff (Otherwise please tell me here)
Not working
FM Radio
Sources
ROM: https://github.com/crdroidandroid
Device: https://github.com/wowufoundme/pie_device_lenovo_A6020
Kernel: https://github.com/wowufoundme/android_kernel_lenovo_msm8916
Vendor: https://github.com/wowufoundme/pie_vendor_lenovo_A6020
Downloads
TWRP 3.3.1.0 - A6020 (Flash in fastboot mode using fastboot flash recovery twrp-3.3.1-0-A6020.img)
Latest Build - AFH
OpenGApps
Installation (Clean Flah/If coming fro any other ROM)
1. Make sure you have the latest TWRP from Shreps (3.3.1.0).
2. Reboot into recovery mode
3. Select Wipe > Advanced Wipe
4. Tick mark Dalvik/ART Cache, Cache, System and Data
5. Swipe to wipe.
6. Select Install and select ROM zip
7. After flashing succeeds, wipe cache/dalvik cache, then Reboot system
8. After reboot completes, boot again into recovery and flash GApps package
9. Flash Magisk for root(optional) then reboot.
Installation (Dirty Flash)
1. Reboot into recovery mode
2. Select Install and select ROM zip
3. Flash TWRP zip but don't flash GApps.
4. After flashing succeeds, then Reboot system
Important Information
The ROM is currently under testing stage. I may not be able to provide changes very fast due to my placements but will try to release ASAP.
Screenshots
--See attachments--
Credits
crDroid Team
Lineage OS Team
YashGarg10, Harry8242, Shreps, scritch007 and all the awesome developers behind it.
first of all We vibe K5 owners pie roms thanks for gushing shubkiritisharma because I no longer have hope for pie roms thanks to hrutvik jagtap us AEX rom 6.0 'I was updating for the last few months but there was plenty of other customisation rom now you have made this variety three if you offer roms that you fix a few mistakes
bro, mentioned such problem:
works only 4g, if i try 2 change to "WCDMA preferred", imy sim card disappears, until i turn lte on again, as result - no voice calls!!!
device a6020a40, opengapps aroma (not all just few apps i choose). the same thing with Viper 6.5.
... at all rom smooth, fast and very good,exept uper stuf.
thnx 4 ur work
raynofff said:
bro, mentioned such problem:
works only 4g, if i try 2 change to "WCDMA preferred", imy sim card disappears, until i turn lte on again, as result - no voice calls!!!
device a6020a40, opengapps aroma (not all just few apps i choose). the same thing with Viper 6.5.
... at all rom smooth, fast and very good,exept uper stuf.
thnx 4 ur work
Click to expand...
Click to collapse
Dev, sorry, everything works fine, this was my operator (vodafone) bugs, sorry1more time, rom is wery good!!!!!
taljha35 said:
first of all We vibe K5 owners pie roms thanks for gushing shubkiritisharma because I no longer have hope for pie roms thanks to hrutvik jagtap us AEX rom 6.0 'I was updating for the last few months but there was plenty of other customisation rom now you have made this variety three if you offer roms that you fix a few mistakes
Click to expand...
Click to collapse
Sorry for being offtopic here. How did you come to know that Hrithik jagtap posted ROMs for this device? I have never heard or seen any threads until you mentioned here.
Akash Raj1 said:
Sorry for being offtopic here. How did you come to know that Hrithik jagtap posted ROMs for this device? I have never heard or seen any threads until you mentioned here.
Click to expand...
Click to collapse
Join the group on telegram.
Akash Raj1 said:
Sorry for being offtopic here. How did you come to know that Hrithik jagtap posted ROMs for this device? I have never heard or seen any threads until you mentioned here.
Click to expand...
Click to collapse
I'm following androidfilehost site there is publishing page below https://androidfilehost.com/?w=files&flid=288438
Volte working?
--New Build Up v5.6--
New Build dated 08072019 is up on AFH.
Link:
crDroid - Pie - A6020
Changelog:
- manifest: android-9.0.0_r40 -> android-9.0.0_r44
- For complete changelog: https://del.dog/fuvivunova
Hello, the apps take too much time to load and the rom is a bit slow in general. Is this normal, or how can I speed things up?
I'm using a microsd for internal storage (adopted), though apps are installed on onboard storage.
Magisk and xposed are also installed.
The rom is good though, no complains.
(forgot to add: battery drain is too much (not so bad on battery saving mode)).
(2)Forgot to add: the microsd card is a sandisk uhs 1 card with up to 80 mbps so it ain't slow.
Apparently flashing dragon elite 1.4 and tuning with theragingbeast improves the battery drain issue. But general sluggishness still remains. Guys tell me what have you got.
sritejkoduru said:
Volte working?
Click to expand...
Click to collapse
no not working
---------- Post added at 10:41 PM ---------- Previous post was at 10:15 PM ----------
it doesnt support volte need to use jio voice for calling as an alternative please fix as soon as possible
Najeebarman said:
no not working
---------- Post added at 10:41 PM ---------- Previous post was at 10:15 PM ----------
it doesnt support volte need to use jio voice for calling as an alternative please fix as soon as possible
Click to expand...
Click to collapse
You can't come here and tell him what to do... Volte won't be fixed anymore.... Live with it
Betrayal92 said:
You can't come here and tell him what to do... Volte won't be fixed anymore.... Live with it
Click to expand...
Click to collapse
Thank you very Much :laugh:
Scrolling is not so smooth. Any idea?
Try 2 turn off scrolling cache in options
raynofff said:
Try 2 turn off scrolling cache in options
Click to expand...
Click to collapse
options?
F#ck, sorry, man - settings...)
Thanks for your work @shubhkirtisharma. I tested this rom on my K5 plus(2GB). Yes, there is some lag in the opening of some applications and the battery drain is little bit faster then in "Oreo". But overall the rom is stable and I think it is suitable for daily usage - no major bugs, "deep sleep" also is OK. The only bug that i found (the same is in the Viper OS) is that the location service only works with GPS - "High accuracy" and "Battery saving" cannot be activated.
Thanks again! I'll be waiting for the next update.
frogst said:
Thanks for your work @shubhkirtisharma. I tested this rom on my K5 plus(2GB). Yes, there is some lag in the opening of some applications and the battery drain is little bit faster then in "Oreo". But overall the rom is stable and I think it is suitable for daily usage - no major bugs, "deep sleep" also is OK. The only bug that i found (the same is in the Viper OS) is that the location service only works with GPS - "High accuracy" and "Battery saving" cannot be activated.
Thanks again! I'll be waiting for the next update.
Click to expand...
Click to collapse
At my A6020A40/415, 2/16 everthng ok with location, may b its ur google account restrictions...
Project treble for Xperia X [ android 10]
Based on Sony Open Devices
Based on Pavel's works
I am not responsible for bricked devices, dead SD cards,.
This is built as dual model, but it could also work on F5121.
Required files:
[OEM file:] Download link
Recommend: V9
[Treble files:] Download link
[Twrp-Q] Download link
How to flash::
First: Flash Twrp I built which supports a Vendor Partition
Code:
fastboot flash recovery < Path of recovery.img >
Second:Format Data and Cache in twrp
Flash treble images in fastboot mode:
Code:
fastboot flash:raw boot < Path of boot.img >
Code:
fastboot flash cache < Path of vendor.img >
Third: flash SW_binaries provided by Sony.
You can also download it from Sony official website.
Code:
fastboot flash oem < Path of OEM.img >
Fourth: Flash a GSI compatible System image and boot! Notice: GSI should be arm64 A/B type
Code:
fastboot flash system < Path of GSI-System.img >
Source Codes
Kernel
Contributors
Sjll @Cubbins
ROM OS Version: 10.0 Q
ROM Kernel: Linux 4.9
Version Information
Status: Testing
Donation:
Paypal
Created 2020-10-25
Last Updated 2020-10-25
Res
Thanks for sharing that
it's working on my F5121
but there's no sound on calls.
HTML:
Duronsoft said:
Thanks for sharing that
it's working on my F5121
but there's no sound on calls.
Click to expand...
Click to collapse
Tested on LineageOS 17.1 GSI, sound is fine when calling.
Duronsoft said:
Thanks for sharing that
it's working on my F5121
but there's no sound on calls.
Click to expand...
Click to collapse
this is a known issue, I will fix it soon
pls help me, i flashed my phone ok but at home sreen notice "
There's an internal problem with your device. Contact your manufacturer for details."
how to fix it?
thank you bro
Tested on F5122 ( Dual ), confirmed Lineage, Havoc and PE, AOSP can be used daily/
However if anyone planning to listen some music on it, use .flac format, .mp3 give you no sound, also Viper not working
---------- Post added at 08:28 AM ---------- Previous post was at 08:24 AM ----------
Noname_90 said:
pls help me, i flashed my phone ok but at home sreen notice "
There's an internal problem with your device. Contact your manufacturer for details."
how to fix it?
thank you bro
Click to expand...
Click to collapse
did you flashed an OEM system image
did you flashed an OEM system image
=> yes, i did it
and no sound for call
my device is f5122
Noname_90 said:
did you flashed an OEM system image
=> yes, i did it
and no sound for call
my device is f5122
Click to expand...
Click to collapse
only a few chance that OEM image would fully functional, i recommend using Official phhusson GSI, currently running Havoc 3.8 and calling have sound
no in-call sound is not an oem or blobs issue, but audio HAL.
I would be glad if someone opened all the issues in the bug tracker, then I will not forget about anything and it will be easier for you to track their current status. Thanks.
Best regards,
Pavel
Phone doesn't awake from deep sleep. I was put it on my desk than pressed power button 10 minutes later and phone waited with black screen than rebooted itself. Anyone has this issue?
Cubbins said:
no in-call sound is not an oem or blobs issue, but audio HAL.
I would be glad if someone opened all the issues in the bug tracker, then I will not forget about anything and it will be easier for you to track their current status. Thanks.
Best regards,
Pavel
Click to expand...
Click to collapse
I've created an issue in bug tracker and i will update all of them there ( in future )
TechnoHT said:
I've created an issue in bug tracker and i will update all of them there ( in future )
Click to expand...
Click to collapse
I noticed it. Thanks. Will see what I can do
Hello, thanks for the amazing work :victory:. The only issue is that I cannot add any fingerprint, tried with descendant x and havoc 3.8.
Other than that, everything is working for me, thank you
for anyone getting .mp3 crashing/no audio, please try to install Viper4Android and turn on Legacy mode in settings
( for further bug + fix just visit bug tracker )
@Sjll
Boot and vendor are cross-compatible for X-Compact (vendor at least is)? Please advise, or port and I will test (when you have a moment).
&(*) said:
@Sjll
Would you be willing to do a Kugo (X-Compact) port (when you have a moment, if possible)?
Click to expand...
Click to collapse
Pretty sure the vendor.img in cache will boot with X-Compact as the partitions are identical. I have a modified boot with the path set for vendor in kernel (hardcoded). Please advise.
&(*) said:
@Sjll
Boot and vendor are cross-compatible for X-Compact (vendor at least is)? Please advise, or port and I will test (when you have a moment).
Click to expand...
Click to collapse
Some things are different. You need another build. Otherwise you can damage your hardware.
If you are interested, I can make a build. But it will be Android 11
Cubbins said:
Some things are different. You need another build. Otherwise you can damage your hardware.
If you are interested, I can make a build. But it will be Android 11
Click to expand...
Click to collapse
That'd be nice (AOSP 11); I think devs like @Sjll don't consider requests or the reasons why || are too busy with other devices. Currently, my hardware is not capable of producing builds or I already would have done it on my own. I attempted to produce the vendor.img and always got a soong 21 error without reasonable debug info leading me to believe RAM is the issue. Regardless, X-Compact needs some attention as everything available is not up to date. I think the kernel and AOSP 10 dev's device bit the dust and the tree is no longer being maintained.
&(*) said:
That'd be nice (AOSP 11); I think devs like @Sjll don't consider requests or the reasons why || are too busy with other devices. Currently, my hardware is not capable of producing builds or I already would have done it on my own. I attempted to produce the vendor.img and always got a soong 21 error without reasonable debug info leading me to believe RAM is the issue. Regardless, X-Compact needs some attention as everything available is not up to date. I think the kernel and AOSP 10 dev's device bit the dust and the tree is no longer being maintained.
Click to expand...
Click to collapse
I have the kernel, device tree, everything. So soon you will get a build. But I only have Xperia X, so you will be my eyes and ears