The Lenovo Yoga Tab 3 does not come with multi-user, so I've been trying to set it up so my family can actually share the tablet without kid-adult conflicts. I'm running Android 5.1.1
As suggested in a number of forums, I've rooted the device and modified build.prop to include:
fw.show_multiuserui=1
fw.max_users=8
The two lines of code are in the build.prop file after rebooting the tablet and "pm get-max-users" in adb shell returns 8, so the two lines of code are in there. However, there is no multi-user icon either next to the settings on the lock screen or the swipe-down menu (next to settings icon, where I hoped it would be). So I cannot add or switch users.
I've tried manually adding users through the adb shell using "pm create-user [username]" with no luck...they may exist in the back-end somewhere, but as a tablet user I can't see them.
I've tried rebooting several times, removed screen lock, and eaten a bunch of chocolate but nothing seems to work.
Any help would be much appreciated!
same issue for S8-50 running 5.0.1. actually the profile section can be found in settings if search for 'profile' . from there the user can also be switched but that's about it - no ability to switch between users in lockscreen
I bought two tab3 10" 16GB for the kids for xmas, and they had a "Users" entry in the settings, but no user avatar in the quick settings.
It seemed pretty good, so I bought another of the 32 GB version for myself and my wife and that has neither. However, I was able to set up user accounts for us by searching for users in the settings menu, so it appears to be there. Unfortunately, it doesn't allow any sane way of switching users, since one has to be logged in as a user to do it... It cannot possibly be considered a good idea to do this, it has to be a bug...
I'd be very interested in a solution to this problem too.
any findings an that so far? How to "search for 'profile'" Am on tab 2 a8-50f, with mentioned changed in build.prop but no options in settings
It is actually as simple as kjekje suggests.
Open the settings tab. Instead of scrolling up and down and looking in every submenu for a "users" section like i did, just click the magnifying glass icon and search for "users". Seems like Lenovo have just hidden it from the menu.
Further broken in 6.0.1
I just upgraded the tablet to 6.0.1 yesterday, as it was pushed by the usual channels. Figured it couldn't make it any worse. It did
Now, if I search for users, I can switch to a restricted user, but I cannot switch back, because there's no option for it when I search for it in restricted mode.
So, I would still be very interested in a better solution to this problem? The only good solution is to be able to switch users when the screen is locked. Anybody found anything by further digging?
I don't know why on earth Lenovo is doing this to us. Perhaps they figure we will buy another tablet if there's no multiuser...? But it surely won't be a Lenovo, they ought to understand that.
Related
Has anyone found the VPN settings hidden anywhere on the Nook? I've been digging around through the various settings panes with the help of AnyCut, but haven't stumbled across anything for network settings that isn't in the stock Nook settings panes. I'll settle for either IPSec or PPTP, either would be better than nothing on open wifi nets.
It would also be nice to be able to be able to use Juniper's VPN for work, but Junos Pulse is coming up as "not compatible with your device" on the Android Market.
Any suggestions?
I asked the same question a week or so ago and got no answer.
I havent been able to find any solution myself either.
Sent from Nook Tablet
jdavisable said:
I asked the same question a week or so ago and got no answer.
Click to expand...
Click to collapse
I saw that thread and it reminded me of VPN settings that I stumbled on while looking at files/inside settings files (not in menus) when I first got my NT, but then I couldn't find them again so didn't post. There is no native support/applications for setting up VPN on the NT at any rate, so you would have to find a separate program, but it looks like some basic android OS support might be there, just not the software or settings menus :/. Did either of you try 5 VPN or a similar app?
edit: Nope, not supported on the NT. All signs point to no until a custom rom or mod is available. I agree - it IS a big oversight and odd omission (and people complained about it on the NC, so they should have fixed it). It's definitely a software issue though, so eventually a feature that can be added.
Hi guys, I’m new to the forum and fairly new to Android devices in general. I’ve googled a good bit before posting, and searched this forum for some keywords, but haven’t come up with a solution to what I need to do.
I have what seems like a fairly simple need: Set up an android device the way I want it, and then clone this image to multiple other devices.
I work with an organization that conducts a lot of epidemiology surveillance in foreign countries. The surveys are done on android based devices with a collection of off-the-shelf apps, plus one we had custom built for our purpose. Data is sent to us via whatever mobile networks happen to be available in the country being surveyed (we buy our phones unlocked, and get the SIM cards in-country).
As we continue to expand, installing all those apps and getting all of the settings just right becomes a very tedious, repetitive task, when you consider doing 100+ phones a month. .
Ideally I would like to stick with the factory rom, just add/remove some apps and configure settings. The cloning process needs to be fairly straight-forward, and not require a bunch of apps to be installed on the target phones first, because that kind of defeats the purpose.
For the time being, we’re using Motorola Atrix and Atrix 2. We also have some XT720s but we’re phasing those out.
Not sure if this is relevant, but below is roughly what provisioning currently looks like:
1. We receive a batch of phones, say 100 at a time
2. First, do a factory reset, and go through the initial setup
3. Remove as many of the factory installed apps as possible
4. Set up WiFi
5. Log into Google Play account and install the 6 apps we actually use
6. Make LauncherPro the default desktop, set it to only use 1 dock and 1 desktop, set a plain boring background, hide all except the app drawer icon, and have and icon for our app, and an airplane mode widget on the desktop.
7. Finally, enter the server connection settings in our survey app (this part we’ve gotten to a point where all we do is drop a config file to the SD Card, and it picks up the settings for this particular app)
8. Turn off the phone, and do it all again on the other 99 devices…
Any thoughts on how to automate this?
I've got this issue where incoming calls and texts are not matching to the contacts database when the international format is used (so incoming 01202 123456 matches if the number is stored in the phone book as 01202 123456 but not if it's +441202 123456)
Seems it's quite common with ROMs / Phones from China.
My phone is a Cube 5H A5300 (a remarkably good bit of kit for the money if I could fix this dam issue) , Android 4.2.1, and MIUI 3.11.15. I don't think this is a MIUI issue hence posting here.
I've been through the suggestions that seemed to offer the best chance of a fix :-
Changing the MIN_MATCH in framework.jar and MMS.apk, and checking that strict comparison if odd from here http://forum.xda-developers.com/showthread.php?t=2268120
Adding ro.phone.min_match=7 to build.prop from here http://forum.xda-developers.com/showthread.php?t=1160343
Various other suggestions relating to stuff in settings.
So I'm at a lost to know where to go next.
Anyone got any suggestions about where number matching is handled in Android? Where can I look for places to check ?
John
Exactly the same problem, also UK
Incoming calls show up in the format 07785 nnnnnn but my phone book has the numbers stored in +44 7785 nnnnnn format, with the result incoming calls only show the number and not the detail in my contacts/people.
I also tried ro.phone.min_match= using 9 and 7 as variables but it made no difference
I have the THL W8s running Android 4.2.1
Brilliant phone but his bug is killing it for me.
Really look forward to a solution
I found the solution for bog standard Android devices, I have a THL W8s running 4.2.1 but it should work on Androids 4.1.x / 4.2.x / 4.3.x according to the threads below.
No credit to me, all down to the guys on XDA, but as a bit of novice it took me ages to trawl all the posts on this subject before finally finding the solution that worked - and easily. It will also avoid you installing lots of apps of playstore that for me anyway either didn't work or gave a poor hack of a work around. In addition, this solution provides a whole host of other fixes and enhancement, brilliant piece of work from the two developers.
Start by removing all your contacts, either export/delete from People to re-import or as in my case delete the corporate email/contacts account
Tip: Reboot after almost every step
1) Your device must be rooted
2) You must be able to install apps direct from your phone: System Settings / Security / Unknown Sources (Unknown Sources may be in a different place)
Then the heart of it:
Install the Xposed Framework
http://forum.xda-developers.com/showthread.php?t=1574401
Full instructions in the thread
Then install GravityBox it's not the a ROM, just the Xposed Framework Module
http://forum.xda-developers.com/showthread.php?t=2316070
Again, full instructions in the thread (Make sure you have a tick next to Gravity Box in the Xposed Framework and reboot)
Then: GravityBox -> General Fixes -> Fix Caller ID
Reboot, re-add or re-import your email/contacts, either add the account or import from contacts and there you go, fixed.
Here's one that didn't work for me but may be worth a try if your version of Android isn't supported with the above solution:
Search on: ro.phone.min_match= where you put a 9, 8, 7 etc after the =
I used ES File Explorer to mount /system R/W and edit the build.prop file, but as I said, after ages of hacking around to get the fix in it didn't work for me.
BTW: I bought the THL W8s after busting my HTC One and not wanting to shell out too much to replace it. All-in-all I'm very impressed with my cheap Chinese Android phone (£155 on eBay), and now that this bug is fixed I'm really chuffed with it. The dual sim/dual standby function saves me carrying two phones, another bonus.
552446934
Thx for posting this, but didn't work for me. Hope it works for others as this is a great bunch of apps.
I'm wondering if my issue is related to the phone (Cube 5H which is a MTK6589 product) or the MIUI ROMs. I'm getting to the point where I think I might need to give up and get a different phone, but I feel the same way about this phone as you do aout the THL - if I could fix this issue it would be a great value for money phone
whalesg said:
I found the solution for bog standard Android devices, I have a THL W8s running 4.2.1 but it should work on Androids 4.1.x / 4.2.x / 4.3.x according to the threads below.
No credit to me, all down to the guys on XDA, but as a bit of novice it took me ages to trawl all the posts on this subject before finally finding the solution that worked - and easily. It will also avoid you installing lots of apps of playstore that for me anyway either didn't work or gave a poor hack of a work around. In addition, this solution provides a whole host of other fixes and enhancement, brilliant piece of work from the two developers.
Start by removing all your contacts, either export/delete from People to re-import or as in my case delete the corporate email/contacts account
Tip: Reboot after almost every step
1) Your device must be rooted
2) You must be able to install apps direct from your phone: System Settings / Security / Unknown Sources (Unknown Sources may be in a different place)
Then the heart of it:
Install the Xposed Framework
http://forum.xda-developers.com/showthread.php?t=1574401
Full instructions in the thread
Then install GravityBox it's not the a ROM, just the Xposed Framework Module
http://forum.xda-developers.com/showthread.php?t=2316070
Again, full instructions in the thread (Make sure you have a tick next to Gravity Box in the Xposed Framework and reboot)
Then: GravityBox -> General Fixes -> Fix Caller ID
Reboot, re-add or re-import your email/contacts, either add the account or import from contacts and there you go, fixed.
Here's one that didn't work for me but may be worth a try if your version of Android isn't supported with the above solution:
Search on: ro.phone.min_match= where you put a 9, 8, 7 etc after the =
I used ES File Explorer to mount /system R/W and edit the build.prop file, but as I said, after ages of hacking around to get the fix in it didn't work for me.
BTW: I bought the THL W8s after busting my HTC One and not wanting to shell out too much to replace it. All-in-all I'm very impressed with my cheap Chinese Android phone (£155 on eBay), and now that this bug is fixed I'm really chuffed with it. The dual sim/dual standby function saves me carrying two phones, another bonus.
Click to expand...
Click to collapse
I'm surprised because the Garvity Box solution was designed around the MT6589 products (I think I read somewhere), my phone is MT6589T.
I did read somewhere that the solution wouldn't work on highly customized ROMs and I think that included MUI. Did the phone come with MUI factory installed, if there is a standard AOSP build for your phone it is probably worth a try using that.
Pity, I nearly threw a party when it worked for me, I'd been hacking around for days.
The phone doesn't come with a full MIUI ROM, just the "themes" part of it. But I really wanted to give MIUI a shot hence me putting the whole ROM on. Good point though - I've been toying with putting the original build back on to see if it fixes the issue. Then I'll know if it's a phone thing or a MIUI thing.
Glas you got yours going though. I crossing my fingers for that party moment!
whalesg said:
I'm surprised because the Garvity Box solution was designed around the MT6589 products (I think I read somewhere), my phone is MT6589T.
I did read somewhere that the solution wouldn't work on highly customized ROMs and I think that included MUI. Did the phone come with MUI factory installed, if there is a standard AOSP build for your phone it is probably worth a try using that.
Pity, I nearly threw a party when it worked for me, I'd been hacking around for days.
Click to expand...
Click to collapse
Strangely - just noticed that numbers in "recent" are now being listed with the correct name matched to the phone book. If I turn off Gravity Box this stops happening, so Gravity Box is having some affect. Just a shame it's not on incoming calls.
johnhelliwell said:
Thx for posting this, but didn't work for me. Hope it works for others as this is a great bunch of apps.
I'm wondering if my issue is related to the phone (Cube 5H which is a MTK6589 product) or the MIUI ROMs. I'm getting to the point where I think I might need to give up and get a different phone, but I feel the same way about this phone as you do aout the THL - if I could fix this issue it would be a great value for money phone
Click to expand...
Click to collapse
Hello there!
So I purchased the strangest "Android Phone" I've ever owned in the form of an iPhone case. Some folks around here probably know about this but for those who don't:
https://item.jd.com/3254140.html
It's essentially a phone within a case but minus the screen, camera and various other things. It "borrows" them from the iPhone itself. Anyway! As cool as that is (and I still think it's super cool in a geeky kind of way)... the issues I'm having are:
- I can't root this thing no matter what I try!
- I can't find the option within Developer Settings to enable ADB debug mode (I suspect either a build.prop value disabled it or I've got a modified settings app.)
- I can't get Play Store installed on the thing.
It's a straight from China device so it's tricky to setup and use but I've just about managed it for the most part. As I say - the main problem is I can't root it so I can't install Play Store (I've tried the "no root" options but they seem to force close and/or be unable to connect to google services despite the fact that the /system/etc/hosts file only has localhost in it.)
Any help would be greatly appreciated and I'm more than happy to tip anyone who manages to help me get this thing rooted or at least running Play Store in some other way!
Thanks!
Managed to root it - info over at:
http://forum.xda-developers.com/android/general/mesuit-i6p-iphone-case-runs-android-t3463757
I have a 2013 model LG Google TV G3 55GA6450 that was recently gifted to me. Whenever I try to configure it to use the built-in tuner as my video source, I encounter "Unfortunately, VideoInputSetup has stopped"
According to this G+ thread, the error has to do with Google no longer supporting the local channel / programming lineup service thus causing the app to crash, and making the TV unusable as there is no other way to enable the TV Tuner input option without the app.
I have already tried force closing the 'VideoInputSetup' app, clearing its cache, etc. Also tried were a factory reset and using a custom launcher shortcut to launch the different functions of the app. Nothing has worked so far. I am willing, (with help) to extract the app and send it along to whoever and see if they can fix. Or to help any other steps / process to fix the issue.
Optionally, if someone might be willing to help me root and/or upgrade the device to newer Android TV, that would be awesome
I'm having same ANNOYING problem! This guy says he managed to root the TV but not sure if it will help. You need to go to the article since I can't post a url
forum.xda-developers.com/android/help/lg-google-tv-rooted-t2811945
Any fix?
Anyone find a fix to this yet?
deeluk said:
Anyone find a fix to this yet?
Click to expand...
Click to collapse
Negative. I was able to find a way to manually add channels to the tuner, but it is currently useless without a way to enable the tuner for Input selection.
Thanks! Could you share the manual process to add channels? Right now, I have a fancy wall paper, would at least like to watch the morning news. Thanks in advance!
deeluk said:
Thanks! Could you share the manual process to add channels? Right now, I have a fancy wall paper, would at least like to watch the morning news. Thanks in advance!
Click to expand...
Click to collapse
This will only work if you already have the "Buil-In Tuner" option available under Inputs.
You will need an app to launch custom shortcuts, I am using QuickShortcuts. Some custom launchers can also do this.
In the shortcut app, find the Settings application under "Activities". Expand it and then scroll through the activities until you find "Manual Tuning" (com.android.settings/com.android.settings.lge.channel.ManualScanActivity) and select that and finish setting up the shortcut to it. Launch the shortcut and add the channels you want.
and is there anything that we can using inseed to do this manually? It is working but there is a bad pop up saying "no paired devices found" and I can't change channel.
Thanks
Awesome, it works! It's clunky, but I can see a few channels now. Really hope someone has a hack through a rooted approach.
Do you know if anyone are working to root the GA7900 or other GTV3?
deeluk said:
Awesome, it works! It's clunky, but I can see a few channels now. Really hope someone has a hack through a rooted approach.
Click to expand...
Click to collapse
I've tried decompiling the VideoInputSetup apk to see if I could manually change anything in the part that keeps crashing, but I wasn't able to recompile it afterwards.
And I've tried everything else I can think of as a work around for those like me with LG's that can't even see the manual tuner in the input options, but to no avail ?
Correct, the manual function for the tuner is not available. I am writing to LG every week to get this done. know it is a lost of time ...
Your inquiry has been submitted for review and we are waiting for feedback so we can communicate it with you as soon as possible. We will also be including the observation you have suggested to improve future LG products. We assure you that these are being reviewed by LG management periodically and being utilized as valuable inputs for consideration in our products and services innovations.
Sorry, I can't help much than that
After a few calls with LG support, and asking for escalation, I learned that a converter box is the workaround. I have coaxial from cable provider. The converter box should have an hdmi output. Any suggestions on which product/model works well?
After accidentally rescanning for channels, I've bricked my TV for the broadcast channels. I've tried to use Teamviewer, Remodroid, but I can't find proper instructions to connect remotely to possibly fix the problem. The exploiteers website seems promising (www exploitee.rs) but not much information for my LG GA6450...
Anyone with update root instructions or ways to get Manual Tuner to work.? I've tried the manual tuner method but no channels are showing up.
I ran into this same issue and had several frustrating calls with LG support that went nowhere. I was lucky enough to stumble on some other suggestions and found a workaround. While not perfect, I can actually use the TV again. I hope this helps others in a similar situation. Follow the steps below and do not deviate (trust me I got really close to bricking my TV figuring this out):
From settings navigate to "Applications".
Scroll over to "All" and then down to find "Live TV" and open it.
Click on "Disable".
Exit back to settings and then to "Channels" (you'll see the options are now enabled).
Auto scan for channels (or if you've already done this manually tune to a channel).
Exit back to settings and back to "Applications".
Scroll over to "All" and then down to find "Live TV" and open it.
Click on "Enable".
Turn the TV off and then back on. (You'll notice you can change the channel, but after android has finished restarting it won't let you any longer).
To get around that, use the gesture button and click on the channel bar at the top to enable to guide below. You can now scroll up and down through channels, find the one you want and open to watch.
Note - If you press the "Home" button, you will no longer be able to get back to live TV. You will have to repeat the steps (on step 5, you can just manually tune). It's extremely frustrating that LG won't release an updated firmware to simply re-enable the tuner and I'm very disappointed with the way they have handled this situation (as well as how they interact with faithful customers).