I have a 2013 model LG Google TV G3 55GA6450 that was recently gifted to me. Whenever I try to configure it to use the built-in tuner as my video source, I encounter "Unfortunately, VideoInputSetup has stopped"
According to this G+ thread, the error has to do with Google no longer supporting the local channel / programming lineup service thus causing the app to crash, and making the TV unusable as there is no other way to enable the TV Tuner input option without the app.
I have already tried force closing the 'VideoInputSetup' app, clearing its cache, etc. Also tried were a factory reset and using a custom launcher shortcut to launch the different functions of the app. Nothing has worked so far. I am willing, (with help) to extract the app and send it along to whoever and see if they can fix. Or to help any other steps / process to fix the issue.
Optionally, if someone might be willing to help me root and/or upgrade the device to newer Android TV, that would be awesome
I'm having same ANNOYING problem! This guy says he managed to root the TV but not sure if it will help. You need to go to the article since I can't post a url
forum.xda-developers.com/android/help/lg-google-tv-rooted-t2811945
Any fix?
Anyone find a fix to this yet?
deeluk said:
Anyone find a fix to this yet?
Click to expand...
Click to collapse
Negative. I was able to find a way to manually add channels to the tuner, but it is currently useless without a way to enable the tuner for Input selection.
Thanks! Could you share the manual process to add channels? Right now, I have a fancy wall paper, would at least like to watch the morning news. Thanks in advance!
deeluk said:
Thanks! Could you share the manual process to add channels? Right now, I have a fancy wall paper, would at least like to watch the morning news. Thanks in advance!
Click to expand...
Click to collapse
This will only work if you already have the "Buil-In Tuner" option available under Inputs.
You will need an app to launch custom shortcuts, I am using QuickShortcuts. Some custom launchers can also do this.
In the shortcut app, find the Settings application under "Activities". Expand it and then scroll through the activities until you find "Manual Tuning" (com.android.settings/com.android.settings.lge.channel.ManualScanActivity) and select that and finish setting up the shortcut to it. Launch the shortcut and add the channels you want.
and is there anything that we can using inseed to do this manually? It is working but there is a bad pop up saying "no paired devices found" and I can't change channel.
Thanks
Awesome, it works! It's clunky, but I can see a few channels now. Really hope someone has a hack through a rooted approach.
Do you know if anyone are working to root the GA7900 or other GTV3?
deeluk said:
Awesome, it works! It's clunky, but I can see a few channels now. Really hope someone has a hack through a rooted approach.
Click to expand...
Click to collapse
I've tried decompiling the VideoInputSetup apk to see if I could manually change anything in the part that keeps crashing, but I wasn't able to recompile it afterwards.
And I've tried everything else I can think of as a work around for those like me with LG's that can't even see the manual tuner in the input options, but to no avail ?
Correct, the manual function for the tuner is not available. I am writing to LG every week to get this done. know it is a lost of time ...
Your inquiry has been submitted for review and we are waiting for feedback so we can communicate it with you as soon as possible. We will also be including the observation you have suggested to improve future LG products. We assure you that these are being reviewed by LG management periodically and being utilized as valuable inputs for consideration in our products and services innovations.
Sorry, I can't help much than that
After a few calls with LG support, and asking for escalation, I learned that a converter box is the workaround. I have coaxial from cable provider. The converter box should have an hdmi output. Any suggestions on which product/model works well?
After accidentally rescanning for channels, I've bricked my TV for the broadcast channels. I've tried to use Teamviewer, Remodroid, but I can't find proper instructions to connect remotely to possibly fix the problem. The exploiteers website seems promising (www exploitee.rs) but not much information for my LG GA6450...
Anyone with update root instructions or ways to get Manual Tuner to work.? I've tried the manual tuner method but no channels are showing up.
I ran into this same issue and had several frustrating calls with LG support that went nowhere. I was lucky enough to stumble on some other suggestions and found a workaround. While not perfect, I can actually use the TV again. I hope this helps others in a similar situation. Follow the steps below and do not deviate (trust me I got really close to bricking my TV figuring this out):
From settings navigate to "Applications".
Scroll over to "All" and then down to find "Live TV" and open it.
Click on "Disable".
Exit back to settings and then to "Channels" (you'll see the options are now enabled).
Auto scan for channels (or if you've already done this manually tune to a channel).
Exit back to settings and back to "Applications".
Scroll over to "All" and then down to find "Live TV" and open it.
Click on "Enable".
Turn the TV off and then back on. (You'll notice you can change the channel, but after android has finished restarting it won't let you any longer).
To get around that, use the gesture button and click on the channel bar at the top to enable to guide below. You can now scroll up and down through channels, find the one you want and open to watch.
Note - If you press the "Home" button, you will no longer be able to get back to live TV. You will have to repeat the steps (on step 5, you can just manually tune). It's extremely frustrating that LG won't release an updated firmware to simply re-enable the tuner and I'm very disappointed with the way they have handled this situation (as well as how they interact with faithful customers).
Related
I recently purchased a Nordic Track 9500 Elite Pro. This bad boy has a 10" android tablet built in. They really don't want you messing with the android part much, but I am sure there are plenty of other users out there like me that want to do more!
This is my first post so I am unable to show the pictures via the link. Hopefully you can copy and past the text to view the images. I will try to repost on my website so it all flows.
I don't see where a post like this would go, I am not sure if at some point it would gain it's own device forum... That would be exciting. So for now I will post here. I will also post my initial findings for others in the community that may want to purchase this treadmill and can't find any information regarding the built in Android Tablet with WiFi.
This image shows the version information. From what I can tell it looks like they purchase an APAD from someone and then stick it inside of their device. They also must have wrote some special drivers and software to interface with the equipment and hardware. I was very happy to see a mainstream current android OS.
Android OS 2.2
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0027.jpg
Click to expand...
Click to collapse
Here are the pre-installed apps. Pretty basic. (note: I was able to find an APK and install Last.FM that wasn't included) Also a major bummer to see was that there wasn't a market application.
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0026.jpg
Click to expand...
Click to collapse
This is the typical workout screen you see.
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0024.jpg
Click to expand...
Click to collapse
I also noticed that the device doesn't have very much memory. This could be due to the built in applications taking up so much space. It only had about 57MB of internal memory free, but it had a built in 2GB SD Card. I have not gotten to the point where I have needed to take it apart yet to see if there is a replaceable SD card. I may wait another 5 years for my warranty to end to do that.
I have tried to install some apps but have not had very much luck. The only app that was I was able to install was the Last.FM.
I tried the follow apps, and they didn't install:
1. Market
2. Angry Birds
3. Pandora
Other disappointments:
1. Designed to not be in the Android Interface. They have an application that runs, and makes it tricky to get to the android desktop. It takes about 3 clicks to get from the main workout screen back to the Android Desktop.
2. The screen is not capacitive, it is resistive. I don't know how much more I need to say about that.
3. Only 3 buttons. Back, Menu, Home. Home takes you to their software not the android home screen. Long press on home does nothing.
4. When i go to the desktop the Time is all over the place. I have tried changing settings in every spot possible but something is telling it what time to think it is, occasionally it is correct... Just don't get it.
Even with the disappointments this thing is sweet. I wish i could install more apps, stream videos from a PC over the WiFi connection and stream music from a PC over the WiFi connection. Maybe with the help of the community we will figure some of these items out... Or I will be the only one who has this that knows about this website!
ntsteele,
How is your experience up to now with your 9500? I am looking at getting the c1250, which is the same as the 9500, but with a smaller motor and no decilne. Is the 10" screen worth it? The rep at Nordictrack told me the only differcence between the 7" screen is the web browser, the google maps display, and some basic apps. But overall the workout system is the same as the 7' display of the 1750 commercial and that you can view the google maps by logging in on ifit.com. Thanks for the info and screen shots.
iFit Android App
Have you or has anyone else been able to pull the apk files off of the NordicTrack Elite 9500 Treadmill. I would be interested to see if it works on any adroid phone to view the menu system.
I played with this today at Google IO. The rep said that the integrated tablet was rev 1 and that they wanted to eventually let users connect their own devices.
what do you need to press to get to the android home screen?
Where I work at there is a Proform Trailrunner 4.0 treadmill that has 10" Android tablet screen. From what I have been told nordic track and proform are made by the same manufacture or something. It was returned because of a broken display unit. Of course I wasn't going to let them throw the old one away so they let me keep it. I trashed the main display and now I have the 10" tablet but cannot power it because the treadmill doesn't operate without a magnetic key. How could I power this thing and see if it works?
I got the new incline trainer x9i which has the 10 inch android interface. I am interested to get in and try installing apps as you have but I am unable to even get to the android home screen. The only time I see it is when I turn the machine on and it is booting up, the screen comes up for a few seconds to where I can hit on the applications button and see what is on it. But within a second after I see the apps it automatically gets routed into the machine exercise interface and I have not figured how to get back to the android home screen from there. How did you do it? It would sure be nice to install a different browser. I hate the fact that I cannot create my own shortcuts. Anyway, love the machine.
How to get to the Android Home Screen
Any luck finding out how to get to the Android Home Screen? I am wanting to do that also. I was able to get to it one time accidentally, but haven't figure out how to stop the machine interface from loading since.
Home Screen
Ok, same question. I just got a C2150 which is a similar model to the 9500. Slightly smaller motor and belt, but same basic thing with the 10" tablet. I believe it's capacitive now, but still not great as far as that goes.
I too have hit the setup icon when it's booting and it goes to the Android setup screen for a second and then continues to boot into the Nordictrack IFit proprietary stuff.
So I can't believe the posts with the images and no explanation of how you got there? Please share with the rest of us.
Also, my console has a USB connector at the top of the thing. Any idea what if anything that'll let me do?
Thanks!
Anyone figure this out? Seems a shame to have a 10' screen and not be able to install apps on it. There must be some button combination that the Icon service team would use to stop the auto load of the iFit interface.
Internal Pictures
I took the tablet apart to see what information can be gathered. Apparently, HANNSTAR (TAIWAN) manufactures the board (HANNSTAR J MV-7); which uses a Samsung ARM8 CPU(5PV210AH-A0 1044); has 512MB; and a 4GB SANDISK FLASH (SDIN2C2-4G).
I haven't been able to find sufficient info to track a compatible ROM, yet I can't imagine for the life of me that HANNSTAR would design this just for Nordic. I am posting some pics hoping that someone might be able to id the hardware, which in turn might help point to a more fruitful search for a workable ROM.
Try to upload pics but not sure if it worked. It's late, and I can't figure out how to do it smoothly yet.
I'm gonna do another bump. I have a similar treadmill (or maybe the exact same one, I lost the the manual with product name). It is of the X9i series and when I saw it in the store, I had to go for it. I was a bit irritated to see that you are locked to the iFit application and you cannot return to the launcher. I need a male to male USB cable to see if I can get a bit of ADB on it.
From the (crappy) performance of it, I can tell it has about 512 MB RAM, a dated CPU clocked at around 600-800MHz, the screen looks like a crappy TFT display at 1280x700. Lastly, this thing runs Froyo. Mine features a full USB port and an Audio in port. Not much to screw around with. Downloads are disabled in the browser, and the Menu key does nothing.
I think something can be done though. The application that controls the treadmill can't crash as it is, and if it ever does FC, the motor shouldn't stop. NordicTrack doesn't have a recovery image up for some reason (thanks, NordicTrack -_-) so that's even less to work with.
Nevertheless, something can be done. It's not really a fun thing for an Android enthusiast to pick up an Android device with such dated hardware (the tredmill itself, as just tredmill is amazing).. Plus, it was $2,100 at Sears.
---------- Post added at 08:48 PM ---------- Previous post was at 08:43 PM ----------
here is a video of the Treadmill and the board;
http://www.youtube.com/watch?v=eKyf6MHIefk
USB and Audio in is on the right side of the console.
I've had my Nordictrack 9500 Pro for about a year now. Still working well for the most part (I do have messed up deck tension adjuster that I need to call support about).
Would love to be able to unlock the Android device to at least install Netflix, Pandora, etc.
I have had one over the air firmware upgrade that went pretty smoothly. Was hoping more updates would come from Nordictrack, but it has been a long time since that one.
Has anyone else noticed that the Speed Calibration utility under the iFit controls says that it isn't enabled yet? Maybe there's hope for future updates.
fanVrARCHITECT
Greetings,
I have been following this thread as a 9500 owner as well, and looking at what has been posted and see if there is any follow up.
1.) like everyone else what startup combinations may have disabled Nordic Tracks proprietary software.
2.) the usb socket on the top of the console, has anyone had anyluck attempting a usb male to male connection on a laptop? If so what has been tried?
3.) any idea of maybe porting something over via the Ifit updates or account? I noticed the HDvideo inside of the program is pretty descent from what I've seen, and looks like the video plays in the center of main app..just a thought.
I'm looking at getting the male to male usb cable and trying to interface it with the below. .. at least curious if the cable will talk, and most likely this unit is not root so view only but maybe a start if it works.
//www*howtogeek*com/howto/42491/how-to-remote-view-and-control-your-android-phone/
Cheers,
devmo
Did anyone figure out how to get android home screen????
I read somebody was able to email themselves an apk and install it? The tablet enables sideloading? Ding ding ding! I'm going to try sideloading launcherpro or any other replacement launcher to attempt to hijack the home screen
Update: Didn't work on my c2150's tablet. Bastards.... I did however get my c2150's to boot into "safe mode" which I have no idea what that entails. While it was powering on, I held down home and back I believe was the combo.
Update: SUCESS!!! So by booting into "safe" mode, you can hit the preferences launcher while the device is booting to interrupt the ifit loading. From there, go enable unknown sources. Then launch the browser and google "z4 apk" and download it and run it. Did permanent root on mine and it worked.
ENJOY
I forgot. Once you get the device into safe mode, install "smart taskbar" by sideloading. It'll make you able to view a task bar over ifit.
EDIT: Since we don't have a custom recovery, or for that matter even a recovery at all it seems, I've not attempted gapps. Could anyone give a detailed response on how to install this? I assume just unzip it in the root directory? I'm worried about permissions, I always forget what to set there. Also, the device comes pre-bundled with busybox, fyi Another must have for this is adbWireless. I tried editing the init.rc but it seems those changes were for nothing. I'll keep people updated as I discover things etc. I'm by no means a dev, but do know a little.
jsteelm said:
I forgot. Once you get the device into safe mode, install "smart taskbar" by sideloading. It'll make you able to view a task bar over ifit.
EDIT: Since we don't have a custom recovery, or for that matter even a recovery at all it seems, I've not attempted gapps. Could anyone give a detailed response on how to install this? I assume just unzip it in the root directory? I'm worried about permissions, I always forget what to set there. Also, the device comes pre-bundled with busybox, fyi Another must have for this is adbWireless. I tried editing the init.rc but it seems those changes were for nothing. I'll keep people updated as I discover things etc. I'm by no means a dev, but do know a little.
Click to expand...
Click to collapse
Sorry - can you tell me the exact steps involved here. How do I get to safe mode and then what? I tried Home Back while powering on and it still goes to the ifit screen
You know I'm really not sure what trick it is to make it stay. I had good luck getting it to stay in android rubbing home/back/menu while it booted and as soon as I saw the android home screen, hit the preferences launcher and then grabbed the top menubar and half pulled it down. All I know is that when you get it to stick in android, its always in safe mode which is triggered by some combination of those buttons on boot. Even then it will boot into iFit, but if you go to the settings first, in safe mode, it wont exit that screen.
Nordictrack commercial 2150 Android Safemode
Very simple folks. Turn treadmill on and once you see ANDROID appear in the center of the screen, begin pressing the dashes button that is between the home and back buttons on the console. Not sure if holding down works any better. An "unable to load widget" will be seen in middle of screen once the I-FIT software has stopped and safe mode will appear at the lower left hand corner. You'll then be able to check out the various Android options etc for your tablet. Be careful in editing anything unless you know what you are doing! Wouldn't want to brick your treadmill unnecessarily. It took awhile to find the key to safe mode access, due to limited info out there, but I hope users will continue to make some progress on exploiting this device and maybe we'll be able to use it to our liking. I would like to stream my dish television to the tablet like I do on my i phone or i pad. Being able to install the dish app via google app store is what I'm looking forward to. I want to be able to watch tv on my treadmill while exercising. Please keep this thread going! I'm sure that future software updates may allow for a better user interface. The challenge is certainly in the storage capabilities in the tablet itself and the sd card inside.
Hello. Today I a friend of mine gave me his Dexim Click Stik since he didn't need it anymore. It's a simple bluetooth clicker for taking pictures with iOS or Android phones.
I don't take many pictures with my phone, much less ones that need me in them. I was hoping I could use the clicker as a remote activator for some shortcut or app.
I've been googling and searching around for hours without much luck. The only thing I've been able to do so far is find an app that lets me open an app upon the Click Stik connecting to my phone, but not when I specifically press the button on the device itself. Not very practical, in my opinion.
I found a tutorial I thought was helpful in somewhat understanding what I might need to do in order to get the functionality I'm looking for here: http://chris.boyle.name/2010/08/android-keymaps. However, the KeyTest.apk he links to in order to obtain the KeyEvent from the bluetooth device does not display any input events when I hit the button on the clicker.
I also haven't been able to find any similar apps to what KeyTest seems to say it does.
Any help or insight is greatly appreciated!
Edit #1: I was able to install the KeyTest.apk via ADB by "adb install KeyTest.apk". Not sure why it worked this way when it wouldn't install normally. That said, now that I have the program open, pressing the button on the bluetooth clicker doesn't result in the KeyTest program telling me anything. Kind of disappointed. Not sure where to go from here.
Hello everyone
This is my first time to the forum
I recently got the 2016 honda civic and it comes with android auto and carplay (for iphone). The car is great however I noticed that there is an "apps" section in the IMID display. There's options to install apk files on a USB drive, browser/search when connected to WI-FI, and a downloader app to view progress of downloads. I've tried having the apk files on a USB and was able to see the apk files, but the "install" button was grayed out so I couldn't install it. I looked on the web for tutorials on getting around it. Since the IMID is linux / android based - I managed to find the android settings window, select "about", scrolled down to "build #", and tapped it 7 times to try and enter the developer mode. I get the countdown till I enter developer mode, but after the last tap, it asks to enter a "passcord" which I think is a typo for "password"? and no keyboard appears to do any sort of typing for the password. I wanted to see if anyone got further than I did.
Tried a lot of things to see if there was a way to access the developer mode or by pass the car system to be able to install apps. I've read it's futile but just wanted to give it a shot.
Thank you for any help / advice!
(i've attached the info of the version that's in the car. need to remove a couple spaces in the link below)
https: //www .anony.ws/image/JgJ1
Found This
Hello,
I was digging in some more and found this under System>Legal Information>Open source licenses
When I selected "Open Source Licenses," it discusses the open source software and provides a link that I posted below.
(remove the spaces in the links below)
http ://www .embedded-carmultimedia.jp/linux/oss/download/H_ADA_163400_00001
(this is a picture of what I found)
https ://www .anony.ws/image/Jgbl
I have some software background but this is beyond what I can understand for Linux/android coding language.
Has anyone heard of updates?
This code appears to just be for the Bluetooth protocol stack, BlueZ. I don't think it would be useful. Is there any other downloads in that text?
T3h Ub3r K1tten said:
This code appears to just be for the Bluetooth protocol stack, BlueZ. I don't think it would be useful. Is there any other downloads in that text?
Click to expand...
Click to collapse
Unfortunately, I've tried digging in more, but haven't found anything besides the open source download link. But thank you for taking a look into what is in the source code. :good: All I know was that it was in C/C++ which I do not have a lot of expertise in following.
We just need to figure out how to get passed the "enter passcord" issue :/ or other methods of cracking into the system. I greatly appreciate the help
Technically, it is supposed to be possible to unlock the radio and navigation system through this website :
https:// radio-navicode.honda.com/
Apparently, the code seems to be unique for each vehicles... Now I don't own a Honda, so I cannot verify it myself.
Enjoy!
Martarek said:
Technically, it is supposed to be possible to unlock the radio and navigation system through this website :
https:// radio-navicode.honda.com/
Apparently, the code seems to be unique for each vehicles... Now I don't own a Honda, so I cannot verify it myself.
Enjoy!
Click to expand...
Click to collapse
Thanks, I got my code, but now, how to type it in? It doesn't provide a keyboard.
Btw, the device has about 2G disc space.
Nice! Thanks for the info =) . For the keyboard entry, first thing I would try would be either trying to pair the radio with a bluetooth keyboard or simply plugging a USB keyboard in the USB connector inside the car. Chances are, it might be able to load the proper drivers by default if Android was not too much modified. Still, a long shot. Otherwise, I am rather surprise that there are no software keyboard on the device...
Martarek said:
Nice! Thanks for the info =) . For the keyboard entry, first thing I would try would be either trying to pair the radio with a bluetooth keyboard or simply plugging a USB keyboard in the USB connector inside the car. Chances are, it might be able to load the proper drivers by default if Android was not too much modified. Still, a long shot. Otherwise, I am rather surprise that there are no software keyboard on the device...
Click to expand...
Click to collapse
The unit has a software keyboard (it pops up in different places, like the browser for ex), it just doesn't pop up in this case. I guess it is disabled on purpose. I don't have a bluetooth or USB keyboard. Will have to search one. Actually, I'm thinking there should be some hidden USB port somewhere because the ones exposed are very limited.
Apparently if you
[...]enter the diagnostic menu press the green power button, menu button, and brightness setting button at the same time. Diagnostic menu will pop up in about 2 seconds. If it does work take your finger off the buttons and try again. To enter the developers menu select detail information & setting then hold the menu button. To enter the hidden android settings select android settings in the developer menu.
Click to expand...
Click to collapse
Source :
htt ps://youtu.be/y-C1odfr0vU
Maybe there is more to be done this way...?
The radio seems to be able to provide a lot of information about the car (a CANBus connection?). Let me know if it gets you any further =) . But still, the USB keyboard seems to me like one the most promising ways of inputing the code you obtained at the moment...
The radio code is only for theft protection. Normally the head unit stores the VIN for its original car and will lock if it gets put in a car with a different/inaccessible VIN. The code lets you unlock the head unit then. You can actually view it in one of the diagnostic menus.
I can confirm that a USB keyboard plugged into either of the two USB ports does not work. I have found out a few things, though. If you open the browser and go into Google or something so the on-display keyboard appears, you can then plug in the USB keyboard and the on screen keyboard will glitch. It will not allow you to type on the USB one. This to me seems like the device is purposefully recognizing the USB, then blocking it from being used. It would make sense to be that there may be a third, hidden USB somewhere that allows much more access.
I also have a 2016 Civic and went through all same things.
On another note, has anyone figured out how to do the brake bypass, how to ground it? I used the web browser by tethering my phone and youtube videos loaded fine, but it won't work if the car is not parked. Anyone know how to have functionality while the car is in motion?
me trying to figure things out earlier today https: //youtu.be/ ionETf7ZL30
johnleewins said:
I also have a 2016 Civic and went through all same things.
On another note, has anyone figured out how to do the brake bypass, how to ground it? I used the web browser by tethering my phone and youtube videos loaded fine, but it won't work if the car is not parked. Anyone know how to have functionality while the car is in motion?
me trying to figure things out earlier today https: //youtu.be/ ionETf7ZL30
Click to expand...
Click to collapse
It's more complicated than that I'm sure. I'm pretty sure it's getting speed sensor information. Also in the hidden diagnostic menu there are two entries that are something like VIDEO Moving or something like that and it's value is 0 meaning that it's off.
an1m3psycho said:
I've tried having the apk files on a USB and was able to see the apk files, but the "install" button was grayed out so I couldn't install it.
Click to expand...
Click to collapse
If you turn the power off then quickly back on, the button is no longer grayed out and you can select it but even still, the install still fails later on.
You guys are a lot smarter than me. Maybe this will help out?
civicx.com/threads/navi-on-non-navi-model-is-it-possible.3107
There is hidden usb port, when you open device. Search on forum, there sre threads where people are trying to root it
jdubau55 said:
It's more complicated than that I'm sure. I'm pretty sure it's getting speed sensor information. Also in the hidden diagnostic menu there are two entries that are something like VIDEO Moving or something like that and it's value is 0 meaning that it's off.
Click to expand...
Click to collapse
Where i can find those settings? can you point out ?
Developper mode asked password
My Honda Civic 2016 (Canadian version) asked me a password to activate the Developper mode. Any one here had the same issue, i have done a complete reset of the system to default and still the same things.
To be clear, after tapping 7 time on Build number, the popup appeared.
My Android Version is 4.2.2 Build: 1.F186.67 and Model number: MY16ADA
Pls help !!
zahurkho said:
My Honda Civic 2016 (Canadian version) asked me a password to activate the Developper mode. Any one here had the same issue, i have done a complete reset of the system to default and still the same things.
To be clear, after tapping 7 time on Build number, the popup appeared.
My Android Version is 4.2.2 Build: 1.F186.67 and Model number: MY16ADA
Pls help !!
Click to expand...
Click to collapse
USA version is the same way it asks for a passcord I believe it is a USB cord for diagnostic that Honda has
Sent from my Pixel using Tapatalk
At my school, we have Chromebooks and a service/extension called securly. Me and my buddies have been trying to bypass it since it was first introduced last year. We are cool with the tech teacher and we have been trying to get passed him for a long time.
Any help on bypassing securly?
Note, inspect element has been blocked along with all extensions except for some adblockers. You can also only sign in on our district accounts. I do not want to powerwash it nor uninroll it(if that's how you spell it haha)
Any help would be greatly appreciated, thanks
Gavin
My buddies and I. Unenroll. Spend less time on youtube, more time learning...
Kinda have the same situation with my Technology Director at my High school, Still cant figure it out.
I Have an understanding that we have to un-enroll to bypass the extension because you can't just "Uninstall" a forced extension on a managed Chromebook.
And on top of that, Google's patched all the forced enrollment bypasses, so its pretty much impossible right now unless you literally replace parts on the computer.
all you have to do is open a console (default chrome: ctrl+shift+j) and put this code in: var a=true;while(a){alert(a);}
then hit enter. when the msg box appears, click the check box that says "prevent this page from showing additional diologs" (or something like that)
your filter should be disabled until you restart.
DISCLAIMER: I AM IN NO WAY RESPONSIBLE IF YOU GET IN TROUBLE FOR THIS. THIS IS PURELY FOR EDUCATIONAL PURPOSES. I DO NOT CONDONE ANY ILLEGAL ACTIVITY OR ANY ACTIVITY AGAINST SCHOOL RULES.
Solution
I have found a way that there is no way to prevent: open task manager with search+escape and disable the securly task. It's kind of finicky though, as it only gives you like 2 second of freedom and sometimes reloads all of your tabs, but if you load a blocked page it won't kick in unless you click a link to a different place on the page.
Also, if you want to un-enroll the chromebook from enterprise manegment, I would suggest buying an m-sata ssd and pulling the one that's in the chromebook out and putting the bought one in until you turn it in at the end of the year. the fresh one won't have enterprise managment on it.
Hope this helps!
Might have a solution?
Hey Rootaholic, I may have found a way, first, go into your extensions tab and at the top of the page click the box that says "Developer Mode", then go down to the Securly extension and click Background Page, then go into the network tab, it's recording, stop the recording and click the box right next to Offline, this may work but I don't have Securly on my Chromebook so your mileage may vary depending on however the filtering is done.
I have tried the development mode and it didn't work please help me with my problem
savagepanda27 said:
I have tried the development mode and it didn't work please help me with my problem
Click to expand...
Click to collapse
Hmm, well problem is if I want to work on this find any security holes, then I need Securly, but I don't have Securly at all, so sorry but I don't have ideas at the moment. Sorry
Hey, my school has the same problem. But my friend found a bypass:
Go to a site that is blocked and copy and paste a the site's url into your browser. Then press the search key and escape key (it will open the Task Manager). Very quickly end the task "Securely" and press enter to go to the site in the search bar (the link you copy and pasted in the search bar).
You can access any site.
If you have any questions just ask.
Good Luck.
-Shane
[content deleted by user]
---------- Post added at 06:54 AM ---------- Previous post was at 06:48 AM ----------
MrDood1313 said:
all you have to do is open a console (default chrome: ctrl+shift+j) and put this code in: var a=true;while(a){alert(a);}
then hit enter. when the msg box appears, click the check box that says "prevent this page from showing additional diologs" (or something like that)
your filter should be disabled until you restart.
DISCLAIMER: I AM IN NO WAY RESPONSIBLE IF YOU GET IN TROUBLE FOR THIS. THIS IS PURELY FOR EDUCATIONAL PURPOSES. I DO NOT CONDONE ANY ILLEGAL ACTIVITY OR ANY ACTIVITY AGAINST SCHOOL RULES.
Click to expand...
Click to collapse
enajor66 said:
I have found a way that there is no way to prevent: open task manager with search+escape and disable the securly task. It's kind of finicky though, as it only gives you like 2 second of freedom and sometimes reloads all of your tabs, but if you load a blocked page it won't kick in unless you click a link to a different place on the page.
Also, if you want to un-enroll the chromebook from enterprise manegment, I would suggest buying an m-sata ssd and pulling the one that's in the chromebook out and putting the bought one in until you turn it in at the end of the year. the fresh one won't have enterprise managment on it.
Hope this helps!
Click to expand...
Click to collapse
Astronaut701 said:
Hey Rootaholic, I may have found a way, first, go into your extensions tab and at the top of the page click the box that says "Developer Mode", then go down to the Securly extension and click Background Page, then go into the network tab, it's recording, stop the recording and click the box right next to Offline, this may work but I don't have Securly on my Chromebook so your mileage may vary depending on however the filtering is done.
Click to expand...
Click to collapse
shlongy.dongy said:
Hey, my school has the same problem. But my friend found a bypass:
Go to a site that is blocked and copy and paste a the site's url into your browser. Then press the search key and escape key (it will open the Task Manager). Very quickly end the task "Securely" and press enter to go to the site in the search bar (the link you copy and pasted in the search bar).
You can access any site.
If you have any questions just ask.
Good Luck.
-Shane
Click to expand...
Click to collapse
All of these methods have been patched at my school district, don't know about others tho.
restart chromebook, wifi off, chrome://inspect, go to other, wait for oobe locke, click it, go to application, click rea more about the web manifest, and it opens an incognito tab
If you change the language of the website it works
Nothing works!
I've tried everything (except the ssd idea- hope to do that soon!), and nothing works. I can't end securly processes (blocked), I can't open a console (ctrl-shift-j doesn't work and ctrl-alt-t, the developer shell, is blocked), and developer mode (both for extensions and chromebook itself) is blocked. :crying:
My friends have found a way to block securely all you have to do is go to the chrome web store, click on extensions and then search VPS it will keep you connected to your regular WiFi but it will change your location to make it seem like your in Mexico or something. There is another detention that my friends use but they won't tell me what it is. Because if you know a securely hack than you're in an exclusive club. Hope this helps.
I found a bypass 4 inspect element BUT I FORGOT it. we were messing around and i finally got it and closed out my securely with window.close () on chrome://inspect//extensions. Oh ya the whole school could use inspect too i do not know what my friend did but they found out in 1 hr xD
Thread Closed.
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
Click to expand...
Click to collapse
Thanks
SacredDeviL666
Forum Moderator
Reply to Disabling Securly
Rootaholic said:
At my school, we have Chromebooks and a service/extension called securly. Me and my buddies have been trying to bypass it since it was first introduced last year. We are cool with the tech teacher and we have been trying to get passed him for a long time.
Any help on bypassing securly?
Note, inspect element has been blocked along with all extensions except for some adblockers. You can also only sign in on our district accounts. I do not want to powerwash it nor uninroll it(if that's how you spell it haha)
Any help would be greatly appreciated, thanks
Gavin
Click to expand...
Click to collapse
I don't know why but everytime my school computer crashes it disables the securly extension until I reboot the computer.
same tho
securly is worthless and pointless it blocks music that is allowed at school and not the videos it should
Same Issue!
I am experiencing the same thing at my school. I am using the blocked chromebook right now to say this.
I was smart enough to figure out how to bypass things on these chromebooks because I do somewhat a lot of coding and other things similar to that.
There is an extension called 'Unblock Everything' on the chrome web store and when you click it, it allows you to go on whatever blocked website on here. When you get it, there will be yellow and black colors on the extension logo so when you see it, get it.
Next thing is I would use that to go on YouTube to find tutorials on getting Inspect Element on a BLOCKED chromebook. I would use that to edit things I did on quizzes in Google Classroom.
There would be things like Episode Interactive that would be blocked so I use this to code on there and to go to links like these!
I hope this helped a lot!
P.S. There are many other tutorials to unblocking different things so if you could find those, please share them with me! Hope I was helpful!
The "End Process" button is faded oml why
This device caught my eye recently (Kyocera KY-01L):
https://uncrate.com/kyocera-ky-01l-card-phone/
Points of interest:
* Android-based
* e-paper display
* ultra compact
Personally I feel Kyocera made a huge mistake by not including the Play Store, or at least including an e-Reader application. A pocket-sized e-Reader that is also my phone just sounds awesome in theory (although the 380mAh battery might prove otherwise in reality...)
Since I use Hangouts and Hangouts Dialer for all my communications, I can't really use this unless I can get gApps installed.
Does anyone have experience hacking Kyocera phones? How difficult would it be to get root, TWRP, and gApps working on this thing?
I googled that phone and found your post. Most intriguing idea, but overpriced imho. I would like to test my developer skills on that but without adb or at least apk installer its useless
Android is not fully compatible (out-of-the-box) with e-ink and screen sizes under 3", unless it's heavily modified. Which is not worth the investmet, considering the target market. And even if Android were adapted, many apps wouldn't run anyway. They wrapped a layer around it to run essentials services. Note that there is a real browser though.
KY-01L Information
So i bought one of these myself out of curiosity and here's what i've found:
ADB can be enabled from the phones settings (the option is called "switch usb debugging") once it's enabled you can sideload APK's
APK's cannot be installed on the phone itself, when doing so you get the message than unknown sources are not enabled however as kyocera have modified the security settings there is no way to enable this afaik
The apps use AOSP icons and have some normal screens present which can be accessed with an activity launcher
When using installed apps the E-ink screen switches to a high refresh rate mode at random and the only way to get it back to normal is to launch cardphonehome (the default launcher)
The phone won't connect to any UK networks (i've only tried vodaphone and EE sims in it)
Bluetooth media audio seems to be removed entirely, even when sideloading a music player
The stock keyboard uses a 9 key input for text, you can sideload something like gboard but i haven't found the option to set it as the default input method
If you intend to buy one then i would suggest looking on YAJ proxy sites like buyee as they tend to go for ~£160.
Apps i'd recommend sideloading:
Activity launcher - lets you get into hidden menus and back into the stock launcher
Stealth music player - Plays music through the phones earpiece, can also enable the earpiece for use with audio from other apps
i'd also suggest lowering the DPI as some apps may be cramped
Dialer codes
*#*#4636#*#* - Android Testing menu
*#*#3878#*#* - Qualcomm FTM menu
*#*#225#*#* - Calendar info
Update: i've noticed the soc that CPUZ is reporting conflicts what others have said, ADB's CPU info command reports it as a wear 2100
I'm really curious if/how an ebook reading app would work on this. Did you try that out?
I'm considering buying a used one to try out as an ultra portable ebook reader.
eldritchgreene said:
I'm really curious if/how an ebook reading app would work on this. Did you try that out?
I'm considering buying a used one to try out as an ultra portable ebook reader.
Click to expand...
Click to collapse
I tried the kindle app, Whenever it's opened it spams an error saying something about not being able to download image files for a few minutes, after that it works fine.
Phone density is set to 210 and kindle text size is on default
Harry99710 said:
I tried the kindle app, Whenever it's opened it spams an error saying something about not being able to download image files for a few minutes, after that it works fine.
Phone density is set to 210 and kindle text size is on default
Click to expand...
Click to collapse
Amazing. Thank you so much Harry, this is great. I'm going to give my experiment a go!
any idea how to make it connect to EU 3g/4g ?
I have the Light Phone 2 which is very similar. I was able to root it and sideload apps on it. Harry is it possible to send over APKs from your Kyocera Card phone so I can test them on the light phone?
kennethashley said:
I have the Light Phone 2 which is very similar. I was able to root it and sideload apps on it. Harry is it possible to send over APKs from your Kyocera Card phone so I can test them on the light phone?
Click to expand...
Click to collapse
You can try, i used apkextractor to extract them but they won't install on another device and trying to install them on the card phone itself gives an error saying the package is corrupt
Nothing in that last post seems to have uploaded
Screenshots - https://imgur.com/a/Z8uCQ1t
APK's https://drive.google.com/file/d/11Qf0EB1I0IhmodnkINQFAdS7uBvtV785/view?usp=sharing
Harry99710 said:
Nothing in that last post seems to have uploaded
Screenshots - https://imgur.com/a/Z8uCQ1t
APK's https://drive.google.com/file/d/11Qf0EB1I0IhmodnkINQFAdS7uBvtV785/view?usp=sharing
Click to expand...
Click to collapse
Yea you are right I can't get the APKs installed.
paulmmm said:
any idea how to make it connect to EU 3g/4g ?
Click to expand...
Click to collapse
nobody ?
paulmmm said:
nobody ?
Click to expand...
Click to collapse
root it
Derek163 said:
root it
Click to expand...
Click to collapse
ill try and come back with results
Hi
First of all, I appreciate the above information where I could find customizing about KY-01L. I was able to install Gmail, Chrome, Line lite, Gboard, and other utilities into my KY-01L!
To be honest, it was quite a stressful process to load apk`s and configure them a number of times.
The first step, I installed the Square Home launcher (https://play.google.com/store/apps/details?id=com.ss.squarehome2&hl=en&gl=us) and the Quickshortcut maker (https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut&hl=en&gl=us) that I am able to configure 10 times easier (Maybe some similar types of the app should work). the default setting of KY-01L is not able to configure app by the screen that is how it is designed by Kyocera.
After setting those 2 apps, I can configure launcher/shortcut in the home menu.
My KY-01L is not stable yet... still need to minor adjustments of configuration but it works what I was expected.
Kaz_SP1200 said:
Hi
First of all, I appreciate the above information where I could find customizing about KY-01L. I was able to install Gmail, Chrome, Line lite, Gboard, and other utilities into my KY-01L!
To be honest, it was quite a stressful process to load apk`s and configure them a number of times.
The first step, I installed the Square Home launcher (https://play.google.com/store/apps/details?id=com.ss.squarehome2&hl=en&gl=us) and the Quickshortcut maker (https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut&hl=en&gl=us) that I am able to configure 10 times easier (Maybe some similar types of the app should work). the default setting of KY-01L is not able to configure app by the screen that is how it is designed by Kyocera.
After setting those 2 apps, I can configure launcher/shortcut in the home menu.
My KY-01L is not stable yet... still need to minor adjustments of configuration but it works what I was expected.
Click to expand...
Click to collapse
Hi there,
Can you explain how you managed to connect it to the network? The one I have is SIM unlocked, I can see available networks but it won't connect. The X.... symbol is displayed in the status bar ("Out of service area") but I am quite sure that the frequencies match.
cheeseus said:
Hi there,
Can you explain how you managed to connect it to the network? The one I have is SIM unlocked, I can see available networks but it won't connect. The X.... symbol is displayed in the status bar ("Out of service area") but I am quite sure that the frequencies match.
Click to expand...
Click to collapse
Hi
I am using NTT Docomo carrier (in Japan) which is the preferred carrier for the KY-01L. KY-01L has limited bandwidth using LTE bands of 2.0GHz and 800MHz only. You would better check with your SIM carrier that uses those bandwidths or not.
Kaz_SP1200 said:
Hi
I am using NTT Docomo carrier (in Japan) which is the preferred carrier for the KY-01L. KY-01L has limited bandwidth using LTE bands of 2.0GHz and 800MHz only. You would better check with your SIM carrier that uses those bandwidths or not.
Click to expand...
Click to collapse
Thanks for replying!
Well, it seems that my carrier doesn't offer the exact same frequencies. 3G is at 2100 MHz (B1) and LTE is at 2100 MHz (B1) and 1800 MHz (B3).
Too limited, indeed. I've been using Docomo and SoftBank and AU phones for over fifteen years now and they all worked but not this one
Kaz_SP1200 said:
Hi
First of all, I appreciate the above information where I could find customizing about KY-01L. I was able to install Gmail, Chrome, Line lite, Gboard, and other utilities into my KY-01L!
To be honest, it was quite a stressful process to load apk`s and configure them a number of times.
The first step, I installed the Square Home launcher (https://play.google.com/store/apps/details?id=com.ss.squarehome2&hl=en&gl=us) and the Quickshortcut maker (https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut&hl=en&gl=us) that I am able to configure 10 times easier (Maybe some similar types of the app should work). the default setting of KY-01L is not able to configure app by the screen that is how it is designed by Kyocera.
After setting those 2 apps, I can configure launcher/shortcut in the home menu.
My KY-01L is not stable yet... still need to minor adjustments of configuration but it works what I was expected.
Click to expand...
Click to collapse
Hi I just ordered my KY-01L off ebay, and looking forward to doing what you're doing!
My question is - after you installed all these things (Square Home Launcher, Quick shortcut maker, Gmail, Chrome, Line lite, Gboard and other utilities), does the battery drain faster even when idle? If so, how much faster vs the vanilla version.
And what other utilities were you able to install on the KY-01L? Music player? Kindle? Youtube? Just curious to see what works...
Lastly, was the Square Home Launcher the only launcher that works? Or there were others that work but this is your preference.
Thanks!