RADIOACTIVE KERNEL CM13 (Uber5.3+Ofast+Graphite) - ONE Android Development

RADIOACTIVE KERNEL
for CM13 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi,i'm here to present my new little project, this time i go for awesome boeffla-kernel thanks to @lordboeffla for letting me use his sources as base
This is my vision of Boeffla-kernel tweaked in order to gain some cool features and smoothness without loosing stability i hope lol
Current Features
General List:
Same of boeffla kernel except for boeffla sound replaced with Franco sound in order to use other tweaker apps
Compiled with UBERTC 5.3.1
-Ofast optimized
Graphite flags
GPU optimization flags
Disabled lot of debbuging in order to gain speed
Adreno idler
Added some cool governors
Msm mpdecision aka Bricked hotplug (enabled by default)
Zen decision hotplug driver
Alucard hotplug driver ( disabled temporally)
NOTE: ZZmoove native hotplug can be used with ZZmoove governor selected as governor and changing the tunable (disable_hotplug to 0) or via terminal using (stop/start mpdecision to activate or desactivate)
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install your preffered kernel tweaker app and profit
CHANGELOG
HERE
DOWNLOADS
HERE
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
XDA:DevDB Information
RADIOACTIVE KERNEL CM13, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/boeffla-kernel-cm-bacon
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: V3.18
Beta Release Date: 2015-12-03
Created 2015-12-01
Last Updated 2015-12-18

Yeah, marshmallow is now complete..

Oh yeah, finally. Thanks @acuicultor

This kernel seems awesome !
Boeffla +zzmoove (+native hotplug) are one of the best combo !!
Just one question:
can we expect omni/slim support in the future ?
Thanks a lot

MBurns2 said:
This kernel seems awesome !
Boeffla +zzmoove (+native hotplug) are one of the best combo !!
Just one question:
can we expect omni/slim support in the future ?
Thanks a lot
Click to expand...
Click to collapse
There's already omni/aosp support by this kernel in another thread. I believe you can't find a marshmallow rom that can't become radioactive..

Setting.Out said:
There's already omni/aosp support by this kernel in another thread. I believe you can't find a marshmallow rom that can't become radioactive..
Click to expand...
Click to collapse
This is a great news !! can't wait to try zzmoove on omni

MBurns2 said:
This kernel seems awesome !
Boeffla +zzmoove (+native hotplug) are one of the best combo !!
Just one question:
can we expect omni/slim support in the future ?
Thanks a lot
Click to expand...
Click to collapse
Setting.Out said:
There's already omni/aosp support by this kernel in another thread. I believe you can't find a marshmallow rom that can't become radioactive..
Click to expand...
Click to collapse
MBurns2 said:
This is a great news !! can't wait to try zzmoove on omni
Click to expand...
Click to collapse
Radioactive aosp kernel boots on omni but unfortunately camera don't work properly, pics are shown upside down beside that everything is working flawesly.
Enviado desde mi A0001 mediante Tapatalk

New build up!!!! Changelog and download link on op.
Enjoy!!!
Enviado desde mi A0001 mediante Tapatalk

Amazing ???

New build up!!!
disabled alucard hotplug till i find a way to make it work properly and compiled with latest ubertc 5.2.1 from 15/11/30.
enjoy!!!

acuicultor said:
New build up!!!
disabled alucard hotplug till i find a way to make it work properly and compiled with latest ubertc 5.2.1 from 15/11/30.
enjoy!!!
Click to expand...
Click to collapse
Sorry but your latest build doesn't seem to boot..

fabio.pagliuca said:
Sorry but your latest build doesn't seem to boot..
Click to expand...
Click to collapse
Sorry, download it again it seems i made a mistake uploading the file. Now is good. Sorry again for any inconvenience.
Enviado desde mi A0001 mediante Tapatalk

acuicultor said:
Sorry, download it again it seems i made a mistake uploading the file. Now is good. Sorry again for any inconvenience.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
No problem, thank you

any recommended kernel tweaking for best battery life without sacrificing performance? Also I receive horrible connection during school, and thats one of my biggest factors of battery drain, is their any tweak/mod fix for this?

Synapse keeps crashing if I try to restore any profile , has anybody experienced this? If
Sent from my A0001 using Tapatalk

joshiameya said:
Synapse keeps crashing if I try to restore any profile , has anybody experienced this? If
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I guess you want to restore a profile made for another kernel, then its normal what happens to you.
Enviado desde mi A0001 mediante Tapatalk

acuicultor said:
I guess you want to restore a profile made for another kernel, then its normal what happens to you.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Well its AK kernel profile, and this kernel is similar, so I thought it might apply this profile
Sent from my A0001 using Tapatalk

Added to OnePlus One index thread:
[INDEX] OnePlus One

New build up!!!
Enabled Alucard hotplug again by popular demand its wip but its usable although not all tunables working, added Elementalx governor, compiled with optimized toolchain and removed some confictive compilation flags.
Download link and detailed changelog on op.
Enjoy!!!!!
Enviado desde mi A0001 mediante Tapatalk

acuicultor said:
New build up!!!
Enabled Alucard hotplug again by popular demand its wip but its usable although not all tunables working, added Elementalx governor, compiled with optimized toolchain and removed some confictive compilation flags.
Download link and detailed changelog on op.
Enjoy!!!!!
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Thanks sir!
Just reporting, for some reason when I try zzmoove profiles I get random reboots.. Maybe was my fault because of something I did but idk..
Thanks for your kernel!
Edit: I didn't try with the last release yet
Sent from my A0001 using Tapatalk

Related

Radioactive kernel marshmallow caf

RADIOACTIVE KERNEL
for CAF Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 90% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with Linaro 4.9 Toolchain optimized for cortex-a15
New Synaptic drivers from CM12.1 - per-panel firmware loading
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Msm hotplug driver
Zen decision hotplug driver
Voltage Control
Sound Control
Kexec Hardboot - Multirom
Lots of governors and i/o schedulerd
disabled debuging
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
HERE
DOWNLOADS
HERE
THANKS!!!!
Special thanks to my mentor and friend @moludo for his patience guiding me @ak for his awesome source
Nuclear Team, and all android community
XDA:DevDB Information
RADIOACTIVE_KERNEL_MARSHMALLOW_CAF, Kernel for the OnePlus One
Contributors
acuicultor
Kernel Special Features:
Version Information
Status: Stable
Current Beta Version: V1.34
Beta Release Date: 2015-11-12
Created 2015-11-12
Last Updated 2016-09-26
Tnx mate ?
Amazing Kernel
second? this is the highest up I've ever been on a thread haha
looking forward to trying this out, thanks!
Will test it!
Good work my friend
Overclock?
Added to OnePlus One index thread:
[INDEX] OnePlus One
molonad said:
Overclock?
Click to expand...
Click to collapse
Just Stock frequency table 300/2457
Enviado desde mi A0001 mediante Tapatalk
You managed to install omni rom as secondary on multirom?
acuicultor said:
Just Stock frequency table 300/2457
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
And will you add overclock? Noone maked overclock on marshmallow yet? I asked for this to some devs, noone did it.. It is unpossible or what?
molonad said:
And will you add overclock? Noone maked overclock on marshmallow yet? I asked for this to some devs, noone did it.. It is unpossible or what?
Click to expand...
Click to collapse
Actually with the termal throttling mecanism to oc is useless so no i don't add oc to this kernel unless it lags and need more power thing that its not the case here.
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
Actually with the termal throttling mecanism to oc is useless so no i don't add oc to this kernel unless it lags and need more power thing that its not the case here.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
ok so caf roms totally declined overlocking for oneplus ... great.. such a shame i will have to wait for cm rom with boeffla kernel.. these roms as nuclearslim has so big potential, but caf cant beat cm.. if you all dont believe me, i will make video with opening speed with caf and non caf (cm) rom with same kernel settings
molonad said:
ok so caf roms totally declined overlocking for oneplus ... great.. such a shame i will have to wait for cm rom with boeffla kernel.. these roms as nuclearslim has so big potential, but caf cant beat cm.. if you all dont believe me, i will make video with opening speed with caf and non caf (cm) rom with same kernel settings
Click to expand...
Click to collapse
You make your choices and flash what suits your needs that is the beauty of the freedom.
Enviado desde mi A0001 mediante Tapatalk
Try putting 200 min, a lot of people looking for energy saving and it can give a different in your kernel. It's just an idea.
Amazing Kernel mate
Congrats
KenjiHannya said:
Try putting 200 min, a lot of people looking for energy saving and it can give a different in your kernel. It's just an idea.
Amazing Kernel mate
Congrats
Click to expand...
Click to collapse
200 MHz CPU frequency ?
DerRomtester said:
200 MHz CPU frequency ?
Click to expand...
Click to collapse
Yes
KenjiHannya said:
Yes
Click to expand...
Click to collapse
Sry not possible. We can only go down to 268mhz.
DerRomtester said:
Sry not possible. We can only go down to 268mhz.
Click to expand...
Click to collapse
268 is good mate ?
Anyone is trying Zen hotplug? How it works? I've read that it mantain online all 4 cores at dame time... It's good??
Inviato dal mio A0001 utilizzando Tapatalk
cerealguy said:
Anyone is trying Zen hotplug? How it works? I've read that it mantain online all 4 cores at dame time... It's good??
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
from what I have read, it basically determines how many cores should be on based on heat.

RADIOACTIVE KERNEL (7.1) Linaro+Graphite+Ofast

RADIOACTIVE KERNEL
for NOUGAT Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 50% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with Uber-naro 4.9 Toolchain
New Synaptic drivers from CM12.1 - per-panel firmware loading
Linux 3.4.112
Latest CM14 Bacon patches
Latest Common Branch patches
Latest Linux 3.4.x patches
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Intellihotplug hotplug driver
Alucard hotplug driver
Zen decision hotplug driver
Zzmoove native hotplug canbe activated setting disable hotplug to 0 in his tunables
CPU Freqs Table: 268Mhz 2880Mhz
GPU Freqs Table: 200Mhz 587Mhz
CPU Freqs Limiter Drivers
Intellithermal full Control
XZ Kernel Compression
LZ4 Support
ZRAM Support
Option to enable/disable Fsync
Deadline, Row, Cfq, Bfqv7r5, Noop, Fiops, Sio, SioPlus, VR, Zen, Tripndroid
Disabled IO Stats
Smartmax, Interactive, Conservative, Impulse, ZZmoove, Performance,Smartmax_eps,Elementalx,Yankactive,Opt imax,Bioshock,Alucard,Dancedance,Darkness,Intellim m,Hyper,Barry Allen,Bluactive,Adaptive,Wave,Wheatley,Lionheart,P egasusq
Kcal Control: Colors, Saturation, Huge, Contrast and more
Kcal Profiles Supports
Voltage Control
Sound Control
Charge Control
Kexec Hardboot - Multirom
Ntfs Support
Gentle Fair Sleepers (Disabled by default)
CIFS Enabled
NFS v3 & v4.1 Enabled
Optimized RWSEM Algorithm
Auto FS Laptop Mode
Arch Power
Power efficient workqueues
Ksm
Sdcardfs enabled
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
× Here
DOWNLOADS
× Here
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
*nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
XDA:DevDB Information
RADIOACTIVE NOUGAT KERNEL, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/android_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: V1.5
Beta Release Date: 2016-08-28
Created 2016-08-28
Last Updated 2016-12-15
Can i flash this on updateings ROM?
SaneQ said:
Can i flash this on updateings ROM?
Click to expand...
Click to collapse
sure
cool
You're fast...
Can confirm working on @updateing 's N Build.
The only problem for me, is slow charge.
Good kernel
Working fine on updating's Build. Great work mate. BTW Phone is very hot to the touch with both stock kernel and this one. Can any good soul suggest me a workaround/ tweaks to fix this? Thanks in advance.
aukdrck said:
Working fine on updating's Build. Great work mate. BTW Phone is very hot to the touch with both stock kernel and this one. Can any good soul suggest me a workaround/ tweaks to fix this? Thanks in advance.
Click to expand...
Click to collapse
Make sure this process is killed:
com.qti.dpmserviceapp
Some people just blocked it's notification and it continues to run in the background.
Better yet, update to the 8/28 build of the 7.0 ROM
Hi Acuicultor!
You could put fast charge in your kernel?
To appers and change ma on Synapse
Please ^^
Tnx and amazing kernel
KenjiHannya said:
Hi Acuicultor!
You could put fast charge in your kernel?
To appers and change ma on Synapse
Please ^^
Tnx and amazing kernel
Click to expand...
Click to collapse
Already there
Enviado desde mi A0001 mediante Tapatalk
How can I make this work with Chainfire's systemless root?
dev_freak said:
How can I make this work with Chainfire's systemless root?
Click to expand...
Click to collapse
There's any problems with supersu systemless, just flash latest supersu zip.
Enviado desde mi Z1 mediante Tapatalk
Great work, running so smooth.
Thanks for the job!
Enviado desde mi OnePlus One.
Good Kernel.
I did something in the first test was not the same.
But clean flash give me this sot
No lags
Good SOT
Good performance and I will keep trying to create a better profile
https://plus.google.com/+JPKenji/posts/SbQoTpRCMFC
Tnx for the Kernel
Good work!
crisis_trustee said:
Good work!
Click to expand...
Click to collapse
Yeah, the answer was pretty obvious, wasn't it? I'd be facepalming myself to unconsciousness if you thought flashing this kernel on any Marshmallow rom would be a good idea.
Camera fix ??
Sent from my A0001 using XDA-Developers mobile app
billbuds said:
Camera fix ??
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Depends what it is this fix.
In N all Kernel i testes dont record video
Is it supports f2fs on data and cache

[KERNEL][CAF]WhitePugKernel for the Nexus 5[7.1.2]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01​
This kernel is only for CAF 7.1.2 ROMs
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Compiled using Linaro 6.3.1 and full upstream to Linux 3.4.113​
Feautures:
XZ kernel compression
ZRAM support
Colors control
Vibration control
Wakelocks control
USB fast charging
BFQ I/O scheduler
zen I/O scheduler
Z-RAM
MSDOS fylesystem support
NTFS filesystem support
NTFS writing support
zen I/O scheduler
More to come
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Nexus 5, Kernel for the Google Nexus 5
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-lge_hammerheadcaf
Kernel Special Features:
Version Information
Status: Stable
Created 2017-09-12
Last Updated 2017-10-12
Reserved
Oh my god this is working great thanks man
Interesting. Gonna try.
Good to see a new CAF kernel.
Keep it up.
Saluti dall'italia
how so
zx604176460 said:
how so
Click to expand...
Click to collapse
Maybe you flashed a non CAF ROM by mistake. The installer checks that the device code name is hammerheadcaf
joe2k01 said:
Maybe you flashed a non CAF ROM by mistake. The installer checks that the device code name is hammerheadcaf
Click to expand...
Click to collapse
I am using AOSPA CFA ROM
zx604176460 said:
I am using AOSPA CFA ROM
Click to expand...
Click to collapse
Okay it looks like AOSPA kept device name to hammerhead instead of hammerheadcaf. You can wait for me to push a new zip or you can open the current one and add a hammerhead to the devices list, behind hammerheadcaf
--- EDIT ---
I've uploaded a new zip. You shouldn't encounter any problem now
joe2k01 said:
Okay it looks like AOSPA kept device name to hammerhead instead of hammerheadcaf. You can wait for me to push a new zip or you can open the current one and add a hammerhead to the devices list, behind hammerheadcaf
--- EDIT ---
I've uploaded a new zip. You shouldn't encounter any problem now
Click to expand...
Click to collapse
It is now his job thank you
ohh CAF is alive again, can u merge with TrueSight?
D820 @ crLOS 14.1
santi1993 said:
ohh CAF is alive again, can u merge with TrueSight?
D820 @ crLOS 14.1
Click to expand...
Click to collapse
No. TrueSight's dev has a different concept of how I want to manage my new kernels. I want to keep them minimal with only some tweaks to improve battery and performance. This kernel has a full upstream to Linux 3.4.113, while TrueSight is stuck at 3.4.0. So no, I won't merge TrueSight stuff
santi1993 said:
ohh CAF is alive again, can u merge with TrueSight?
D820 @ crLOS 14.1
Click to expand...
Click to collapse
Just curious... crLOS ?
joe2k01 said:
No. TrueSight's dev has a different concept of how I want to manage my new kernels. I want to keep them minimal with only some tweaks to improve battery and performance. This kernel has a full upstream to Linux 3.4.113, while TrueSight is stuck at 3.4.0. So no, I won't merge TrueSight stuff
Click to expand...
Click to collapse
Thanks for sharing ur concepts!
Well, then can we suggest some cherrypicking? One thing id loved on CAF with custom Kernel is the ability to amplify speaker beyond limits, it was called speaker volume on adiutor
D820 @ crLOS 14.1
---------- Post added at 10:23 AM ---------- Previous post was at 10:22 AM ----------
daedric said:
Just curious... crLOS ?
Click to expand...
Click to collapse
im at crdroid! it has CAF n NON CAF, since first build to 3.4 i was on CAF, but then TS kernel got outdated and i had no clue on goin to AOSP
D820 @ crLOS 14.1
joe2k01 said:
No. TrueSight's dev has a different concept of how I want to manage my new kernels. I want to keep them minimal with only some tweaks to improve battery and performance. This kernel has a full upstream to Linux 3.4.113, while TrueSight is stuck at 3.4.0. So no, I won't merge TrueSight stuff
Click to expand...
Click to collapse
Hi joe,
which CAF base rom do you suggest to use with your kernel?
Thanks
Pjotr91 said:
Hi joe,
which CAF base rom do you suggest to use with your kernel?
Thanks
Click to expand...
Click to collapse
I like to use halogenOS, it's a really nice ROM with a really nice team. But I may have something in the bakery for the ROM scene too, who knows
Running good here, thanks for developing caf kernel. :highfive:
Trying it now, so far so good... Thanks for your effort!
Inviato dal mio Nexus 10 utilizzando Tapatalk
Hello!
I want to try to build unofficial AICP CAF with your kernel.
What string should I add into "aicp_manifest.xml" file in ".repo/local_manifests/" folder to make it possible?
Update: I appreciate your effort and I thank you for the time you have devoted to the development of the kernel, but I believe you prefer me to be sincere and not declare wonders when things are somewhat different. Therefore, I must say that, even if your kernel is stable, still it appears to be on par with lineage stock kennel, and still not up to TrueSight, which provides better performance, much better battery life, especially during standby, yet worse audio quality-speakerphone for example is unusable.
If I could express my opinion, I would suggest you pick up True Sight, fix audio, update it with latest security patches and we would have THE perfect kernel for CAF. Just my two cents!
Anyway, thanks again for your time and your dedication!
Inviato dal mio Nexus 10 utilizzando Tapatalk

[Kernel][harpia]SomeFeak Kernel-7.05 Moto G4 Play [Non Aroma]

This is clearly @facuarmo source project thanks to him
Work by me
*Fixed not installing issues
*Removed Aroma installer, Shrinked the size of zip file {You can directly install it now}
Works only for Nougat stock and custom ROMS
* Include <std_disclaimer.h> * Your warranty is now void. * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *
Features:
CPU Overclocked to maximum 1.6 Ghz
GPU Overclocked to maximum 650 Mhz
Moderately undervolted
Updated to Linux 3.10.104
Synced with latest CodeAurora changes
Improved memory management
Improved memory caching backported from Linux 3.15
Improved storage performance
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
IntelliPlug CPU hotplug (by faux123)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.9
Vibration intensity control
Compiled with Linaro GCC 6.2 and optimized for Cortex A53
Stripped down and optimized configuration
Governors: impulse and elementalX, yankactive, zzmoove, darkness and bioshock.
Double tap to wake (DT2W).
Permanently fixed screen flickering: SELinux works fine in permissive or enforcing mode.
Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
Drastically improved CPU thermal control: should react approximately from 40°C and end if lower than 35°C are reached. Otherwise it'll keep trying to cool the device, protecting, mainly, the battery.
Automatic thermal throttling and CPU cooling driver added and enabled.
Enabled CPU current throttling driver.
Use the hidden LED as a notification light.
Enabled forced consistency checks for F2FS (/data).
Multi-Cluster Power Management (less CPU battery drain).
KSM (Kernel Samepage Merging).
Advanced Power Management (emulated).
SMT (Simultaneous Multi-Threading).
Fixed temperature handling.
Installation:
Flash it via TWRP clear cache and dalvix cache and you are good to Go.
Bugs:
*Camera doesnt work on this kernel if you're not a selfie expert or a profeesional photographer than this is for you.
Advanced Power Management might let the device reach higher temperatures sometimes.
If you want to thanks for this kernel just go here- https://forum.xda-developers.com/member.php?u=5817781
Download link- https://drive.google.com/file/d/1BFkgQAaJZHMtwQmIxPNVmXEjG2DTArxw/view?usp=drivesdk
Let me know if you have any other issues if you can.
Source
https://github.com/FacuM/android_kernel_motorola_msm8916
I don't know what the heck is this but I hope you enjoy this spaghetti source xD.
facuarmo said:
I don't know what the heck is this but I hope you enjoy this spaghetti source xD.
Click to expand...
Click to collapse
Hey brother why you discontinued your somefeak project, for some annoying reason i didn't find a way to install it but after some work i'd installed it and it was awesome.sorry for my bad english
Waiting for your reply...
No way to fix the câmera?? Its a shame this marvelous kernel have this bug....
Castaldelli said:
No way to fix the câmera?? Its a shame this marvelous kernel have this bug....
Click to expand...
Click to collapse
Yeah that bug is still there and irritates me... But afterall it has many features and governors than any kernels in harpia.
facuarmo said:
I don't know what the heck is this but I hope you enjoy this spaghetti source xD.
Click to expand...
Click to collapse
Otherwise I've installed it then after 1 week of testing I'd uploaded it. Because i thinks that someone found this issue also.
Wiffi not fount in the VIPERos... ROM or the stock fount?
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
Wiffi not fount in the VIPERos... ROM or the stock fount?
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
And stock ROM fort the june, not fount wiffi!!!
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
And stock ROM fort the june, not fount wiffi!!!
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
Bro i dont understand. Please try to speak in english.
Sorry, friend! I wanted to tell you that when installing the kernel in the rom viperos I ran out of wiffi and also in a stock rom
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
Sorry, friend! I wanted to tell you that when installing the kernel in the rom viperos I ran out of wiffi and also in a stock rom
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
Same here..
Other issue: if u enable dt2w at boot with Kernel Adiutor if the screen is off (when the dt2w was enabled by K.A) the screen don't respond anymore when you turn on
srfarias said:
Same here..
Other issue: if u enable dt2w at boot with Kernel Adiutor if the screen is off (when the dt2w was enabled by K.A) the screen don't respond anymore when you turn on
Click to expand...
Click to collapse
yes. I remember that in all the nuclei. The problem is that without wifi, the kernel loses all the benefits....
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
Sorry, friend! I wanted to tell you that when installing the kernel in the rom viperos I ran out of wiffi and also in a stock rom
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
Try to use it on any other Rom, like crdroid,lineage
I am on crdroid and their is no wifi issue.
If you still find the issue, let me know with the logcat.
@AgentVoid
https://forum.xda-developers.com/g4-play/development/kernel-somefeak-reborn-kernel-harpia-t3845362
srfarias said:
@AgentVoid
https://forum.xda-developers.com/g4-play/development/kernel-somefeak-reborn-kernel-harpia-t3845362
Click to expand...
Click to collapse
Which version are you using?
AgentVoid said:
Which version are you using?
Click to expand...
Click to collapse
7.05
the download link isn't working. does anyone have a new download link?
Hi, good night I wanted to make a request to the dev of this kernel, pls fix the camera bug this by far is one of the best kernels or even the best harpia, I need the camera and would like to use it

[KERNEL][Oreo/Pie/10] Fz Kernel

Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTE »
Fz Kernel
Only for 8.1, 9.0 & 10.0 ROMs.​
ABOUT​This kernel was made using the current LineageOS kernel source as base and merged all the necessary changes to work on Android 10 (Ten). On top of it I then added some features for it to be customized by each user if they do want to.
Feature list
Replaced Qualcomm cpu-boost with Sultanxda cpu_input_boost driver.
Replaced Qualcomm MPDecision with NVIDIA CPUQuiet driver from Tegra CPUs.
Charging current customization Interface.
Voltage control for undervolting.
KCAL Color Control support.
Simplified Thermal driver.
Franco's Wakelock blocker.
Franco's Sound Control.
Franco's Backport of POWER_EFFICIENT workqueues.
Enabled Multicore power saving.
A LOT of under-the-hood optimization changes from Sultan, Franco, Boeffla, arter97 and many others.
Fixes USB MTP without enabling USB Debugging.
Fixes Data Saver.
Smooth default kernel behavior using ZaneZam's zzmoove governor with ZZ Battery Plus profile.
Custom Governors:
Alucard
Impulse
Intelliactive
Intellimm
Lionheart
Smartmax
zzmoove
Custom Hotplugs:
MSM Hotplug
AutoSMP Hotplug
CPUQuiet
Custom I/O Schedulers:
FIOPS Scheduler
SIO Scheduler
TripNdroid Scheduler
zen Scheduler
DOWNLOAD HERE​
OTA Updates
Going forward, kernel OTA updates will now be handled via Franco's Kernel Manager app. Users may import the following URL in FKM Flasher to receive updates:
https://raw.githubusercontent.com/Feinzer/fz_kernel_data/master/ota/release.json
Thanks to
CyanogenMod / LineageOS
Ak
Nikhil18
DeadlyIndian
ArtxDev
Sultanxda
franciscofranco
ZaneZam
Lord Boeffla
flar2
Adithya R.
Tomoms
Idprophecy
All of this is possible ONLY because of the work of these people and teams. Thank you.
XDA:DevDB Information
Fz Kernel, Kernel for the OnePlus One
Contributors
Feinzer, LineageOS, AK, Nikhil18, DeadlyIndian, ArtxDev, Sultanxda, franciscofranco, Lord Boeffla, ZaneZam, flar2, Adithya R., ab123321, Tomoms, Idprophecy
Source Code: https://github.com/Feinzer/fz_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Stable
Created 2019-05-23
Last Updated 2020-01-15
Reserved
Changelog:
Fz v4.3:
Removed CPUQuiet Hotplug driver.
Added Intelli Hotplug driver.
Updated installer zip to anykernel3.
Added FKM OTA Support
Fz v4.2:
Added ZRAM (Disabled by default)
Removed Maple I/O Scheduler due to reboots caused by it.
Back to good ol' zzmoove default setup.
Fz v4.1:
Added back features and optimizations lost in the LineageOS rebase process.
Added some new settings on init to actually use the features this kernel has.
Fz v4:
Complete rebase to bacon's current LineageOS kernel.
Initial release for Android 10.
Fz v3.1 HOTFIX:
Fixed bootloop on ROMs built with AOSP/POSP trees.
Fz v3:
Added NVIDIA's CPUQuiet driver.
Disabled mpdecision by default.
Added Dynamic Interactive governor.
Added ElementalX governor.
Added Maple I/O Scheduler.
Added general optimizations and improvements.
Reserved
I'll give a try.
Currently over LOS 16 20190523 + magisk 19.2 no issue after flashing.
I'll try common things on few days:
1. Gps UNTESTED
2. Bluetooth OK (test with 2 bluetooth headphone and 1 bluetooth sound speaker)
3. Wifi hotspot OK (unlike FC kernel r57)
4. Battery life UNTESTED
5. More?
Been using it for weeks. It's good. Definitely worth trying.
Using it with TugaPower and I'm very satisfied. [emoji106] for good work.
Sent from my A0001 using Tapatalk
This kernel work great on TugaPower P18. Thank you for your great work. All the best.
Sent from my OnePlus One using XDA Labs
Is there any changelog?
kakawait said:
Is there any changelog?
Click to expand...
Click to collapse
Yes, there is but I don't really wanna edit the OP every time I release a new version unless there are like, nice big changes to edit the feature list, I might post changelogs once I drop a new version on the reserved posts or something.
Yo Feinzer! i see your bacon is still alive...
i can't really use telegram rn that's why I've been missing , been trying to revive my damn phone...
(figure out who i am , isn't that hard )
Edit: Glad to see you doing some work hehe
Initial impression of this kernel seems good. The phone is a bit more responsive now.
Using official lineage OS 16.
doesn't work on POSP v2.2 - bacon
meiax93 said:
This kernel work great on TugaPower P18. Thank you for your great work. All the best.
Sent from my OnePlus One using XDA Labs
Click to expand...
Click to collapse
What settings you use on hotplug?
Enviado do meu A0001 através do Tapatalk
VitorMSA said:
What settings you use on hotplug?
Enviado do meu A0001 através do Tapatalk
Click to expand...
Click to collapse
i just flash that kernel and forget. i not tweak any settings. xD
Does.'t boot on AOSP rom also
portfolio said:
Does.'t boot on AOSP rom also
Click to expand...
Click to collapse
You aren't giving details about the problem, which ROM are you using? any mods or something?
RenzozO said:
doesn't work on POSP v2.2 - bacon
Click to expand...
Click to collapse
portfolio said:
Does.'t boot on AOSP rom also
Click to expand...
Click to collapse
This issue has been fixed now with the v3.1 release.
Next time tho, try to tell me more information about the situation because I cannot address an issue that I have no information of, thank you
yes, v3. 1 is booting now with arrowOS, thanks!
Is this kernel support zram with lz4?
Or will it be supported?
SoarStarlight said:
Is this kernel support zram with lz4?
Or will it be supported?
Click to expand...
Click to collapse
Will look into it
Edit: nvm it does, I forgot about it.

Categories

Resources