Related
Is there a way to change where the light sensor readings trigger a change in brightness level?
Currently the phone change from lowest brightness to higher when reads 30lux and change to lowest brightness when reads 10lux.
It's annoying for the phone to change to lowest brightness when i still in a light up room but just pointed away from light sources. And also it's also not switching to higher brightness when i need it in a dim environment.
So, anyone know of some app that can adjust these values? Or point me some direction to work on it.
Light Sensor is Ok, but...
Using z-device test I compared the light sensor readings between SGS2 and the NS. The light sensor seems to be correct. Still, at 10 lux, the SGS2 is setting the brightness value to its lowest and the NS, not.
I'm starting to believe that there is a a problem between the mapping from the light sensor and the brightness level. If I'm not mistaken this can only be fixed/adapted within the ROM.
DoomFragger said:
Using z-device test I compared the light sensor readings between SGS2 and the NS. The light sensor seems to be correct. Still, at 10 lux, the SGS2 is setting the brightness value to its lowest and the NS, not.
I'm starting to believe that there is a a problem between the mapping from the light sensor and the brightness level. If I'm not mistaken this can only be fixed/adapted within the ROM.
Click to expand...
Click to collapse
As from what i read, S2 seems to divide the screen brightness into 5 level
http://forum.xda-developers.com/showthread.php?t=1235212&highlight=auto+brightness
However, the mapping of these five level to it's correspondence light sensors reading seems to be odd.
let's just call lowest brightness as lv1 and highest as lv5,
The phone will stay on lv1 whenever the sensors read from 0-30lux
The phone will drop to lv1 whenever the sensors read 10lux.
The gaps is just too wide to give a pleasant viewing experiences, often stay on lv1 brightness while i'm no longer in pitch black area.
if there is a way to change this, i would prefer to set it as
stay on lv1 whenever sensors read 0-5lux
drop to lv1 whenever sensors read 2lux (the lowest brightness lv is only feasible for me when inside a pitch black environment)
Since there is a file determine it's brightness value for each lv, so i'm thinking there should also one for it's mapping.
Does anyone have a solution to auto brightness issue?
Even in the darkest room, the lowest light level is "medium" and not low! Its excellent setting when using phone outdoors but in dark room or at night its just too bright. Is my phone broken or is it general windows phone setting?
Sent from my TITAN X310e using Board Express
on my titan, the auto brightness behaviour is erratic and sometimes goes too low.
the camera is one of the issue triggers. after every return from a photo session, the screen goes to a lower brightness.
also, sometimes it happens when unlocking the phone but i don't know what triggers it. then suddenly the screen would return to its normal brightness after a few seconds, although not always.
i suppose it's a driver issue...
antaed said:
on my titan, the auto brightness behaviour is erratic and sometimes goes too low.
the camera is one of the issue triggers. after every return from a photo session, the screen goes to a lower brightness.
also, sometimes it happens when unlocking the phone but i don't know what triggers it. then suddenly the screen would return to its normal brightness after a few seconds, although not always.
i suppose it's a driver issue...
Click to expand...
Click to collapse
so you get the autobrightness to go as low as 'low' set manually? - I tried it but even after camera the lowest brightness I am getting is same as 'medium' when set manually!
drupad2drupad said:
so you get the autobrightness to go as low as 'low' set manually? - I tried it but even after camera the lowest brightness I am getting is same as 'medium' when set manually!
Click to expand...
Click to collapse
no, not that low only lower.
but you are right, even in complete darkness the screen won't go to its lowest setting...
Yes same issue here.
Automatic can go a little bit lower than medium, but not much. Too bright in dim environement.
For general use, i would like to have a preset between low and medium
Since these days many people like ultra bright screens (and ultra loud sound) i am not sure HTC will try to fix this "issue".
I just hope Microsoft can add a brightness slider in the future. (Or bility to set the min auto and max auto levels)
Btw, do you know why camera mode go into max brightness ? This is a little harsh indoor.
crmb said:
Yes same issue here.
Automatic can go a little bit lower than medium, but not much. Too bright in dim environement.
For general use, i would like to have a preset between low and medium
Since these days many people like ultra bright screens (and ultra loud sound) i am not sure HTC will try to fix this "issue".
I just hope Microsoft can add a brightness slider in the future. (Or bility to set the min auto and max auto levels)
Btw, do you know why camera mode go into max brightness ? This is a little harsh indoor.
Click to expand...
Click to collapse
Yes that behaviour is very strange too! I think it's present only in the Titan. Some other windows phone manage the camera brightness a little better. But then I think increased brightness while using camera sort of makes it little pleasant when using it outdoors. But indoors as you mentioned, it's a bit too harsh brightness!
I think it's the light sensor that doesn't work properly. Some places/forums mentioned about issues with various HTC driverseven after those 2 softwares updates we received in Nov-early Dec.
In daylight,the auto brightness works wonderfully for me,I never change it.
But in a fairly dark room,it's too bright and most of the time,I set it to low
I usually set it to medium... and set to low by myself by night.
I have sent a message to HTC (via theirs contact/ticket system) about the "can be improved" auto brightness, and "camera set brightness to max" issues.
Better than nothing.
Since this is a easily reproductible problem, maybe they can take a look if they receive several messages about this.
I wonder if the screen going to max brightness with camera may have something to do with the "HTC Camera modes" addon ? (who knows..)
But i don't see how to remove it. I even can't find it on the marketplace (under HTC section).
I have same issue, I get blinded when I check the time on my phone at night
It was there even before camera modes update was applied by HTC. So unlikely
Sent from my TITAN X310e using Board Express
Obviously, the brightness go to max too when using skype with video.
Hope they will notice and fix it.
Trying to talk to HTC customer service is especially unhelpful here in france.
They have absolutely no knowledge of theirs WP7 products
(whatever the problem encountered)
Now that we have unlocked roms, any way to tweak the auto brightness ?
crmb said:
Now that we have unlocked roms, any way to tweak the auto brightness ?
Click to expand...
Click to collapse
I've tried all 4 ROMs and they have the same behaviour as stock ROM at the moment. But it might be useful looking into the registry threshold values. I know there is some sort of home brew app that lets us set the volume increase in 10s, 20s, 30s or 50s. So a regedit might be somewhere, will dig around myself since you've reminded me again
hi all, I noticed that light sensor doesnt work properly, when I go from dark to light area, the brightness increases but when I go from light to dark area the brightness wont decrease, on honeycomb it worked properly, anybody else experiences this problem?
Same here, it goes bright but does not decrease.
I use the app https://play.google.com/store/apps/details?id=rubberbigpepper.DisplayBrightness&feature=search_result#?t=W251bGwsMSwxLDEsInJ1YmJlcmJpZ3BlcHBlci5EaXNwbGF5QnJpZ2h0bmVzcyJd
make an invisible slider on the edge of screen to adjust brightness.
is there any way to make it work properly?
Don't think so. Its pretty much unusable now.
Sent from my HUAWEI MediaPad using Tapatalk 2
There are lots of negative comments about light sensor, but i have to say it works well to me on ICS. Could be possibly massive amount of defected devices.
Lightsensor doesn't work for me either - too bad, hope it will be corrected.
Perhaps it's because I'm running ICS "General Channel".
HUAWEI MediaPad FIRMWARE(S7-301u,android4.0,C232B002,General Channel)
Do the sensor dim the light in the same session for you?
Here it turns up the light but not down again.
Sent from my U8800 using Tapatalk 2
Same here, adjusting upwards works fine, but it doesn't adjust downwards in low light conditions.
I have tried two apps that turns the light down again, custom auto brightness and lux auto brightness.
One small problem. The pad will crash on pattern unlock after sleep. I Also the light sensor will not work s after wake up sometimes.
Sent from my HUAWEI MediaPad using Tapatalk 2
mangoman said:
I have tried two apps that turns the light down again, custom auto brightness and lux auto brightness.
One small problem. The pad will crash on pattern unlock after sleep. I Also the light sensor will not work s after wake up sometimes.
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
I'm guessing no one has had any luck with this issue but I figure I'd necro the thread anyways. My light sensor sucks also. I used 'Android Sensor Box' to get the values coming out of the sensor. It only displays either 40 lux or 280 lux which is obviously not right. This is on Cyanogen 9, stock t-mobile ICS and the rooted international gingerbread(can't remember which one exactly).
So I was wondering if anyone who owns one of these has ever gotten a sensor value that makes any sense.
thanks
nope,
I use instead display brightness https://play.google.com/store/apps/details?id=rubberbigpepper.DisplayBrightness&hl=no
create an invisible brightness slider on theedge of the screen.
Try using custom auto brightness with the auto brightness on (there's a setting in that app that disabled the system auto brightness at screen on. Turn it off).
The original kernel only recognized 3 light levels. If you use bart's kernel it will recognize 6 levels.
Yes, I think there's a software problem because both app (lux and cua) crash hard in HMP, but I don't think fixing it is a priority.
Sent from my HTC Glacier using Tapatalk 2
How to use custom auto brightness without crashing the tablet.
There are 2 options that should be followed, other settings can be adjusted to your liking.
1. In preferences, Check Use pulsed sensor mode. Basically this option will make the app read the sensor itself instead of listening the sensor value given from the system.
2. In advanced preferences, set the sensor update speed to either half sec or 1 sec. I tried normal, but the app won't read the sensor value, so probably the slow normal maximum setting only works if you get the sensor value from the system.
You can set disable system auto brightness. I recommend it before because the setting was a "hack" which was making the system read the brightness value thus the app can get that value. Right now it's recommended that you check the disable system auto brightness.
I am using z2 about 10 monts. Today i feel when i put mobile full brightness i observed some wave running from top to bottom. Specially observed when open NDR utility and es file explorer. Before appearing the both applications interface waves appear for instance. I am worried is it ok or some problem. And also today observed brightness bright more autometically, althoug i am on full brightness. Any help suggestion Thanks in advance
I've noticed the brightness change on its own too sometimes. I always use full brightness (adapt to lighting conditions disabled) and randomly, I'll notice my screen get brighter or darker sometimes. It's completely random, not sure what causes it.
bdithug said:
I've noticed the brightness change on its own too sometimes. I always use full brightness (adapt to lighting conditions disabled) and randomly, I'll notice my screen get brighter or darker sometimes. It's completely random, not sure what causes it.
Click to expand...
Click to collapse
Omg I thought I was the only one, My brightness is set at 100% when I quickly unlock the phone I notice a quick dimming on the screen even though it's at full brightness...
naeem123 said:
Omg I thought I was the only one, My brightness is set at 100% when I quickly unlock the phone I notice a quick dimming on the screen even though it's at full brightness...
Click to expand...
Click to collapse
Yup I have the exact same thing. Not sure if others have it as well, but as far as I'm concerned, it's normal (I hope)
You don't want to give your significant other yet another reason to yell at you while you're reading XDA in bed. Rate this thread to express what you think of the Samsung Galaxy S7 Edge's display minimum dimness. A higher rating indicates that the display can get extremely dim, ideal for reading in very dark environments.
Then, drop a comment if you have anything to add!
I don't have on auto brightness or any power saving features on yet my display brightness seems to have a mind of its own. I can be in a dimly lit room and have to put my brightness slider past the halfway mark just to get decent brightness and the always on display will be so dim it's barely visible. Other times I could be in a well lit store or outside and the display will be very bright even with the slider nearly all the way down. It also seems the always on display may get brighter the longer it's on but it starts out very dim even if my brightness is cranked up. I really don't know what to make of it. Sometimes the display brightness seems way worst then my nexus 6p (not saying 6p has bad brightness just using as a reference cause most reviewers claim the brightness on note5/s7 is a bit brighter.) Other times the quality seems better then my friend's note 5.
Adaptive brightness? Sure sounds like it.
I am disappointed it does not go low enough like all android phones tablets etc. I read books in the Kindle app in bed and my iPhone or I pad can go very low brightness but all the android gadgets I have cannot they are always too bright and annoy her. I thought this could be the one but I guess not
Tezray said:
I am disappointed it does not go low enough like all android phones tablets etc. I read books in the Kindle app in bed and my iPhone or I pad can go very low brightness but all the android gadgets I have cannot they are always too bright and annoy her. I thought this could be the one but I guess not
Click to expand...
Click to collapse
Install LUX Auto brightness app and it should solve your problem, in fact you can set it so dim that you can hardly read it.
I find the always on display to bright. Is there a way to dim it a bit?
Kapitein187 said:
I find the always on display to bright. Is there a way to dim it a bit?
Click to expand...
Click to collapse
I totally agree with that, when you cover the sensor the brightness is way better.
It should be part of the environment, now it's more like "HEY LOOK AT THE TIME" kinda distracting
JeffreyNijnatten said:
I totally agree with that, when you cover the sensor the brightness is way better.
It should be part of the environment, now it's more like "HEY LOOK AT THE TIME" kinda distracting
Click to expand...
Click to collapse
Yeah haha. The funny thing is that the "night clock" is perfectly dimmed. Wished that there was a setting for the AOD (always on display) to have manual brightness controll. And of course app notifications. Which the edge display can show, but the AOD can not. Strange decision of our Sammy friends.
Kapitein187 said:
Yeah haha. The funny thing is that the "night clock" is perfectly dimmed. Wished that there was a setting for the AOD (always on display) to have manual brightness controll. And of course app notifications. Which the edge display can show, but the AOD can not. Strange decision of our Sammy friends.
Click to expand...
Click to collapse
Exactly, that would be perfect, I tried using AOD at work today and it's so distracting that it's actually worthless now. I also tried the night clock at work and it looks great, it doesn't bother me at all and it's very handy. Hope samsung will update AOD because it can be very useful.
But in my opinion the overall (auto) brightness is too bright, when I dim my screen it automatically brighten the display up to what it thinks it is the right brightness compared to the environment . With my previous phone (LG G2) it changed the auto brightness to the user preference.
You can fix this issue, set brightness 100% and reboot.
Hi guys, I noticed right now that if I switch from an high luminosity environment to a very dark one, automatic brightness remains the same and I have to uncheck and check again the "auto" option on notification bar. Other times, in same conditions, it adapt the brightness after some times instead of immediately. Dose have my phone problems?
turtuv said:
Hi guys, I noticed right now that if I switch from an high luminosity environment to a very dark one, automatic brightness remains the same and I have to uncheck and check again the "auto" option on notification bar. Other times, in same conditions, it adapt the brightness after some times instead of immediately. Dose have my phone problems?
Click to expand...
Click to collapse
This is to prevent the display continue changing brightness, it does change but it has a delay so your screen isn't flickering bright, dark, bright, dark.
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
Kapitein187 said:
I find the always on display to bright. Is there a way to dim it a bit?
Click to expand...
Click to collapse
This has been fixed with the update that came out this week #yay! It's now changing automatically, not as distracting anymore :highfive:
I noted that when I turn on the screen I a low light environment, it has a fade before the screen completely turn on, like a fade effect. I did some tries and this happen only in low light condition. Is this normal?
JeffreyNijnatten said:
This is to prevent the display continue changing brightness, it does change but it has a delay so your screen isn't flickering bright, dark, bright, dark.
Click to expand...
Click to collapse
Yes, but if I put the phone orizonthal (for instance I put I on the table) the brightness change immediately. Why is that?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
its too bright :/
turtuv said:
I noted that when I turn on the screen I a low light environment, it has a fade before the screen completely turn on, like a fade effect. I did some tries and this happen only in low light condition. Is this normal?
Yes, but if I put the phone orizonthal (for instance I put I on the table) the brightness change immediately. Why is that?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
Click to expand...
Click to collapse
Does someone know something about that?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
Anyone use Night Mode app? Can configure it to be like ios night mode.
ssgunner20 said:
Anyone use Night Mode app? Can configure it to be like ios night mode.
Click to expand...
Click to collapse
What does it exactly?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
Very good
turtuv said:
Hi guys, I noticed right now that if I switch from an high luminosity environment to a very dark one, automatic brightness remains the same and I have to uncheck and check again the "auto" option on notification bar. Other times, in same conditions, it adapt the brightness after some times instead of immediately. Dose have my phone problems?
Click to expand...
Click to collapse
Hi.. I have the same problem! Every time I switch form a environment with more or less luminosity I have to unchek and check again the "auto" option on a notification bar.. Do you founded out any solution?
caxopa said:
Hi.. I have the same problem! Every time I switch form a environment with more or less luminosity I have to unchek and check again the "auto" option on a notification bar.. Do you founded out any solution?
Click to expand...
Click to collapse
Do you have MM or Nougat? I noticed the same in MM but it works significantly better in Nougat.
The problems some of you have ... seriously? ?