Layers support - OnePlus X Q&A, Help & Troubleshooting

Did anyone try layers on stock o2os?
And if, does it work fine?

Yes, Oxygen OS does support layers. I just found this out as well. There are a few themes that need to update/fix, like the 3 dot menu area in the dailer. Other than that everything works well.
---------- Post added at 09:38 AM ---------- Previous post was at 09:28 AM ----------
Mojar7070 said:
Yes, Oxygen OS does support layers. I just found this out as well. There are a few themes that need to update/fix, like the 3 dot menu area in the dailer. Other than that everything works well.
Click to expand...
Click to collapse
Edit: you will need Root though to use the layers manager.

Mojar7070 said:
Yes, Oxygen OS does support layers. I just found this out as well. There are a few themes that need to update/fix, like the 3 dot menu area in the dailer. Other than that everything works well.
Click to expand...
Click to collapse
In which version of OxygenOS did you try layers?
Just yesterday I installed Layers manager, installed a Layers theme from play store, applied it, rebooted and stuck in bootloop..
I'm in lastest OOS 2.1.3-X with blu_spark kernel..

jackshot said:
In which version of OxygenOS did you try layers?
Just yesterday I installed Layers manager, installed a Layers theme from play store, applied it, rebooted and stuck in bootloop..
I'm in lastest OOS 2.1.3-X with blu_star kernel..
Click to expand...
Click to collapse
Same as you. 2.1.3-x with blu spark. All stock rom.
Did you install busybox??

Mojar7070 said:
Same as you. 2.1.3-x with blu spark. All stock rom.
Did you install busybox??
Click to expand...
Click to collapse
no, I thought it was already installed with the kernel.. Do I need that or anything else?

jackshot said:
no, I thought it was already installed with the kernel.. Do I need that or anything else?
Click to expand...
Click to collapse
No, Kernel will not automatically install apps like busybox. I would start with the busybox installation and then trouble shoot from there.
How did you get past the bootloop of you don't mind me asking?? If you restored a backup, then good for you.

Mojar7070 said:
No, Kernel will not automatically install apps like busybox. I would start with the busybox installation and then trouble shoot from there.
How did you get past the bootloop of you don't mind me asking?? If you restored a backup, then good for you.
Click to expand...
Click to collapse
Yeah, I had a backup ready just in case..
So you have already installed busybox, then layers manager and you were ready to go?
I'm dying to get layers working [emoji1]

jackshot said:
Yeah, I had a backup ready just in case..
So you have already installed busybox, then layers manager and you were ready to go?
I'm dying to get layers working [emoji1]
Click to expand...
Click to collapse
Yes. If you all the other necessary items installed (SuperSU, kernel of you're liking) then all you "should" need is busybox.

Mojar7070 said:
Yes. If you all the other necessary items installed (SuperSU, kernel of you're liking) then all you "should" need is busybox.
Click to expand...
Click to collapse
Could we have some kind of a list of working Layers?
At least the ones you have tried.

The ones I've tried are not complete. There some aspects of the theme that's not showing up.
Timberwolf
Skyblue
Inversion
Art
Vivid colors
Currently using Art theme by SPAstef

Thanks a lot.

Mojar7070 said:
The ones I've tried are not complete. There some aspects of the theme that's not showing up.
Timberwolf
Skyblue
Inversion
Art
Vivid colors
Currently using Art theme by SPAstef
Click to expand...
Click to collapse
Update: tried prodigy and midnight. works well. Prodigy seems like it has all aspects of the phone properly themed. Midnight theme missing a few things.

jackshot said:
Just yesterday I installed Layers manager, installed a Layers theme from play store, applied it, rebooted and stuck in bootloop..
Click to expand...
Click to collapse
Mojar7070 said:
How did you get past the bootloop of you don't mind me asking?? If you restored a backup, then good for you.
Click to expand...
Click to collapse
Calvin2394 said:
Could we have some kind of a list of working Layers?
At least the ones you have tried.
Click to expand...
Click to collapse
There's a much easier way you guys can recover from bootloop due to a bad layer. Just boot into recovery, then select twrp file manager, and delete the bad layer from system>vendor>overlay folder. If you have many layers and are not sure which one of them is bad, just delete the whole folder, that will just delete all the applied layers.
I tried many of the free layers available on play store. Almost all of them were working on my device, except Art, iirc. Which was disappointing since I read on the OP forums it was working fine for most people
However, most of the layers did actually miss a few settings icons from getting themed.
Another interesting thing I noticed - dark colored themes work best if you set dark mode on in OOS, and bright themes with dark mode off. I had fewer bootloops that way, don't really know exactly why it happens.
Anyhoo, here's some of the themes that I liked and are working perfectly fine on my device:
-Navigate
-Pastelz Light
-Simpl
-Zed
I'm currently rocking Zed, looks great :good:

Can some one post ss?

OPX 2.1.3-X
With prodigy theme by samulomba96
Icons is Glim Dark by Maximilian keppeler

One more: Dailer

i've tested a lot of layer theme. one common issue, if you install the framework overlay you will get bootloop when you reboot your phone. another bug, if you press the power button lil bit longer, it will soft reboot instead showing the advance reboot option. you can try install any theme but leave the framework first. try to contact the dev, or provide them with framework-res.apk so they can update the framework for oneplus x. hope this help you guys

Mojar7070 said:
Yes. If you all the other necessary items installed (SuperSU, kernel of you're liking) then all you "should" need is busybox.
Click to expand...
Click to collapse
I do not have busybox, though layers still work

Funk Wizard said:
I do not have busybox, though layers still work
Click to expand...
Click to collapse
That's great. :thumbup:

1. Reboot to twrp
2. File manager > system/vendor/overlay
3. Delete all overlays
4. Say thanks to me
5. You just unbricked layers
6. Magic man

Related

[Q&A] JasmineROM Discussions [Chat Room]

.
This is the place for Q&A, general discussions, and post-installation chat about JasmineROM. Please keep your personal issues that are not related to the development, such as themes and other stuff, here.
.
Looks great. Will drive it for a few days and report back if there's any issues.
Thanks for all of your hard work & our 1st ROM.
Will be a version for the D855 ?
drmspidi said:
Will be a version for the D855 ?
Click to expand...
Click to collapse
I don't have this device, but you may test it yourself. Make nandroid backup, clean flash & report me back! It doesn't flash any firmware images (kernel, modem, ... etc); so, it's safe to test on other devices. If you've any issues, you can restore your backup.
DPI Affect
Heard mention that the DPI change affects the quick circle case display......is this true, or would it affect this? If it does change, what can be done post flashing to regain quick circle proper display?
Thanks for the work, btw!!!
hsbadr said:
I don't have this device, but you may test it yourself. Make nandroid backup, clean flash & report me back! It doesn't flash any firmware images (kernel, modem, ... etc); so, it's safe to test on other devices. If you've any issues, you can restore your backup.
Click to expand...
Click to collapse
But isn' t only for Verizon ?
What kind of problem I may have ?
JasmineRom
drmspidi said:
But isn' t only for Verizon ?
What kind of problem I may have ?
Click to expand...
Click to collapse
Yes this Rom is for the Verizon VS985 variant but he just stated that it does not flash a kernel, modem, or recovery of any sort. So the worst thing that may happen is your device bootloops or you just may not have data, working WiFi or Bluetooth, or some other minor issue. It is relatively safe to flash on other devices to try so long as you have a Nandroid backup of a working or stock ROM.
willyjay said:
Heard mention that the DPI change affects the quick circle case display......is this true, or would it affect this? If it does change, what can be done post flashing to regain quick circle proper display?
Thanks for the work, btw!!!
Click to expand...
Click to collapse
It works fine for me, but I can create a flashable zip to revert to stock DPI, if needed.
drmspidi said:
But isn' t only for Verizon ?
Click to expand...
Click to collapse
Yes, some Verizon devices may work on other carriers.
drmspidi said:
What kind of problem I may have ?
Click to expand...
Click to collapse
Unpredictable, it may work perfect or with issues related to hardware drivers: mainly Mobile Data, WiFi, bluetooth, ... etc. It could be fixed though with a converter replacements (port).
acparker18 said:
Yes this Rom is for the Verizon VS985 variant but he just stated that it does not flash a kernel, modem, or recovery of any sort. So the worst thing that may happen is your device bootloops or you just may not have data, working WiFi or Bluetooth, or some other minor issue. It is relatively safe to flash on other devices to try so long as you have a Nandroid backup of a working or stock ROM.
Click to expand...
Click to collapse
Exactly.
add ons
Do you think you will be adding volume enhancements soon?
Loving the Rom. Just needs themes and home back up and restore enabled
Saw that you would be pushing 1.0.1 update for tether. Will this just be an update zip or will it require a full rom flash?
USB Debugging Doesn't Stick After Reboot
I attempted to get USB Debugging to stick after rebooting by adding this line to build.prop:
persist.service.adb.enable=1
I reset the permissions to rw-r-r after editing build.prop before I rebooted. No luck, still not remaining enabled after a reboot.
lawtalking said:
Saw that you would be pushing 1.0.1 update for tether. Will this just be an update zip or will it require a full rom flash?
Click to expand...
Click to collapse
1.01 or 1.1 will be an update zip to dirty flash...
The Great Dahli llama said:
I attempted to get USB Debugging to stick after rebooting by adding this line to build.prop:
persist.service.adb.enable=1
I reset the permissions to rw-r-r after editing build.prop before I rebooted. No luck, still not remaining enabled after a reboot.
Click to expand...
Click to collapse
I'm aware of this issues...
I hope you can get Aroma working later on. The only downside is the size of the rom for download. The only bloat I find useful on this phone is multi window, knock on, and the clipboard. I hope to see some kind of volume enhancement as well.
wes53177 said:
Do you think you will be adding volume enhancements soon?
Click to expand...
Click to collapse
jerbear2011 said:
Loving the Rom. Just needs themes and home back up and restore enabled
Click to expand...
Click to collapse
eraursls1984 said:
I hope you can get Aroma working later on. The only downside is the size of the rom for download. The only bloat I find useful on this phone is multi window, knock on, and the clipboard. I hope to see some kind of volume enhancement as well.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sure, at some point a new release of JasmineROM will include all requested features
Oh also the Verizon variants messaging app doesn't allow you to choose vibe pattern if there's a way you could enable that it would be awesome.
Sent from my Bump'd VS985 4G
I've got the itch to do a bit of themeing. Do you guys use the G3 TweaksBox themes? Im considering building for that since it is cross ROM compatible.
It will be a black/grey/orange theme using the Numix Cinnamon theme as inspiration.
Would there be an issue if I change the DPI to the original value.
I don't like the one with the ROM, and I can't get used to it.
What would be the best way to go about it?
jerbear2011 said:
Oh also the Verizon variants messaging app doesn't allow you to choose vibe pattern if there's a way you could enable that it would be awesome.
Click to expand...
Click to collapse
will look into it...
PiousInquisitor said:
I've got the itch to do a bit of themeing. Do you guys use the G3 TweaksBox themes? Im considering building for that since it is cross ROM compatible.
It will be a black/grey/orange theme using the Numix Cinnamon theme as inspiration.
Click to expand...
Click to collapse
Most apps/themes should work with this ROM since it's deodexed, except carrier-related apps: messaging, *telephony*, ... etc. I'll make my own themes & a list of compatible themes later.
Umbrella Corp said:
Would there be an issue if I change the DPI to the original value.
I don't like the one with the ROM, and I can't get used to it.
What would be the best way to go about it?
Click to expand...
Click to collapse
1.0.1 includes what you want; http://forum.xda-developers.com/showpost.php?p=56028380&postcount=129
This ROM ROCKS!!!! Thx!!!!

RIP THE DREAM stuck at android robot face

First of all i've searched everywhere in the last 2 days but found nothing, i have a Xiaomi Redmi Note 3 Pro and i've installed the cm-13.0-20161117-NIGHTLY-kenzo(latest) everything is working fine, flashed the Xposed framework and installed the apk and again everything is fine but when i decide to install any module no and i reboot to activate it i just get stuck at the Android robot face animation.. can i get somehelp somewhere?
What robot face??...do you mean the boot logo..or the something else?
hitesh1792 said:
What robot face??...do you mean the boot logo..or the something else?
Click to expand...
Click to collapse
Yep i mean the bootlogo animation
Paura7 said:
Yep i mean the bootlogo animation
Click to expand...
Click to collapse
Go to twrp recovery and clean install the ROM
---------- Post added at 08:18 PM ---------- Previous post was at 08:16 PM ----------
You might have installeded an xposed module which is either not compatible with your device or the os version hence you are experiencing bootloop...
hitesh1792 said:
Go to twrp recovery and clean install the ROM
Click to expand...
Click to collapse
Tried several times but i just can't get xposed to work as it should, everytime when i install whenever module and reboot it just get to that point.. i just wanted to fix the issue
Paura7 said:
Tried several times but i just can't get xposed to work as it should, everytime when i install whenever module and reboot it just get to that point.. i just wanted to fix the issue
Click to expand...
Click to collapse
which xposed framework are u flashing?
hitesh1792 said:
which closed framework are u flashing?
Click to expand...
Click to collapse
I've installed the latest .apk (XposedInstaller_3.1.1.apk) and ofcourse the latest framework (xposed-v86-sdk23-arm64.zip)
Also i've used CM13 some months ago and Xposed worked like a charm.. i don't know why this time it's giving so much problems
Paura7 said:
I've installed the latest .apk (XposedInstaller_3.1.1.apk) and ofcourse the latest framework (xposed-v86-sdk23-arm64.zip)
Also i've used CM13 some months ago and Xposed worked like a charm.. i don't know why this time it's giving so much problems
Click to expand...
Click to collapse
Try may b a diff rom...like RR..
hitesh1792 said:
Try may b a diff rom...like RR..
Click to expand...
Click to collapse
I'm not interested so much in changing room because i've always been a fan of CM..
Same problem was with me, did a clean install without xposed and everything's good. (I'm on cm14 atm)
Paura7 said:
I'm not interested so much in changing room because i've always been a fan of CM..
Click to expand...
Click to collapse
Try using some earlier nightly..
balazs312 said:
Same problem was with me, did a clean install without xposed and everything's good. (I'm on cm14 atm)
Click to expand...
Click to collapse
As far as i know there is no official Xposed for cm14 but if anyone has my problem i found this that should be the fix
http://forum.xda-developers.com/xposed/announcement-cm-bootloop-issues-xposed-t3501945
Seems you need to flash a nightly that was pushed before november and everything should be good to go, ill try it later and let u know
Paura7 said:
As far as i know there is no official Xposed for cm14 but if anyone has my problem i found this that should be the fix
http://forum.xda-developers.com/xposed/announcement-cm-bootloop-issues-xposed-t3501945
Seems you need to flash a nightly that was pushed before november and everything should be good to go, ill try it later and let u know
Click to expand...
Click to collapse
Yes, it is being fixed atm, we also found a temporary solution http://forum.xda-developers.com/redmi-note-3/how-to/fix-fix-bootloop-issues-xposed-roms-t3503184

Stock rooted E4 running substratum.

So I took the risk and tried substratum on my metro variant E4 and it worked like a charm some things don't theme like the nav bar, but so far so good.
Navbar themes work!
See here
KyleBryant said:
So I took the risk and tried substratum on my metro variant E4 and it worked like a charm some things don't theme like the nav bar, but so far so good.
Click to expand...
Click to collapse
U can use "custom nav bar pro" from play store for theming and customization of nav bar
See here
Yes I used that when I first got it, but with substratum the theming is endless and it you can also re-theme the nav bar animations.
KyleBryant said:
Yes I used that when I first got it, but with substratum the theming is endless and it you can also re-theme the nav bar animations.
Click to expand...
Click to collapse
I agree because my device is rootless
How do you install substratum w/o root??
Hoboc said:
How do you install substratum w/o root??
Click to expand...
Click to collapse
You don't, it has to be rooted.
KyleBryant said:
You don't, it has to be rooted.
Click to expand...
Click to collapse
kindly update the working and awesome substratum themes dude...if possible with SS thanks
KyleBryant said:
So I took the risk and tried substratum on my metro variant E4 and it worked like a charm some things don't theme like the nav bar, but so far so good.
Click to expand...
Click to collapse
In mediatek variant I applied all the overlays of modern ui substratum theme but on reboot got stuck at android logo...I restored from my backup...what went wrong?
Edit - applying overlays on Android system only causes device not to boot otherwise working ok
I'm not sure, I do know some substratum themes refuse to work with our devices, try a different one maybe that will help
KyleBryant said:
I'm not sure, I do know some substratum themes refuse to work with our devices, try a different one maybe that will help
Click to expand...
Click to collapse
Is yours the Qualcomm or is yours the mediatek?
SykkNyzz said:
Is yours the Qualcomm or is yours the mediatek?
Click to expand...
Click to collapse
Qualcomm
Hello,i if is possible can you send me your BLPGU modem it can be found in System/Etc/MDDB via zip file to isikmuhamm @ gmail. com ?
https://play.google.com/store/apps/details?id=com.jerbeck24.Spectrum
(Trying this again, I bought it last year, and I enjoyed it)
Rooted and running Substratum. I have tried Coalfield, Compound, S.I.X. Theme, J Dark Ice, and a few others. Is anyone else having problems to get the themes to install correctly? I mean, they build fine and install, but if I choose a red accent with black primary, I still get the teal accent with black primary. Coalfield has done the best, but still doesn't theme everything as I would like. Any advice?
Also, with other phones, I remember being able to set priorities for multiple themes. That option doesn't appear anymore.
Some substratum themes just won't work with aosp rooms, all of the aospUI rooms work flawless with our phone when you select compatability mode with pixel accents
isikmuhamm said:
Hello,i if is possible can you send me your BLPGU modem it can be found in System/Etc/MDDB via zip file to isikmuhamm @ gmail. com ?
Click to expand...
Click to collapse
Why do you need that?
Anyone have a work around for the Boot up Lenovo / Hello Moto Animation?
KyleBryant said:
Why do you need that?
Click to expand...
Click to collapse
bcs ı was lost my imei number but then ı solved it myself, thank you

[A2017G][TWRP-ZIP]iYTB ADFree Black Themed

Hi,
Thought i make a flashable zip for our device based on @ZaneZam 's iYTB to get YouTube without those ANNOYING ADDS....
Latest time it became tooooooo much, even minute after minute.....!
Therefore this zip.
LINK : https://androidfilehost.com/?fid=962021903579484937
LINK update based on 20.12.2017 (v12.49.55) : https://androidfilehost.com/?fid=890129502657578397
LINK update based on 17.05.2018 (v13.18.54) : https://androidfilehost.com/?fid=674106145207489463
LINK update based on 10.06.2018 (v13.22.54) : https://androidfilehost.com/?fid=746163614322270159
It's the BLACK THEMED version.
Procedure :
1. Put on extSD
2. wipe cache/dalvik
3. Flash
4. reboot (if it does not show up on first boot, REBOOT again)
5. in playstore/settings : check "no auto update" , otherwise you'll end up as before !
This zip should work when your youtube is in system/app or data/app. Both will be wiped and replaced with the new one.
Report when zip isn't working anymore. Therefore i should update the zip with the latest version.
ALL CREDITS : @ZaneZam and all others !!!!THNX!!!:good::good::good:
ENJOY !
don't just HIT&RUN....there's a :good: button for some reason
ps : this should normally work for ALL VERSIONS
What is the difference to ZaneZam ???
The original one works perfect ???
Glad to see this. I've tried the original installer with the black YT but it always failed (using the place in download directory method). Installation of the non-themed version worked fine. Could've just renamed the black version to match but didn't feel like it.
Kudos to you for this.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Original works perfect on g version, so the other versions got issues ??? They updated the installer in September, may that's why ???
coremania said:
Original works perfect on g version, so the other versions got issues ??? They updated the installer in September, may that's why ???
Click to expand...
Click to collapse
No issues my friend, relax
It's just a twrp zip for our flashaholic-souls :cyclops:
And it's a bit less handling than the universal installer or the manual method...you don't have to rename, set permissions, or whatever you have to do in the OP from iYTB. My method : just download and flash and you know it'll be ok !
I just molded it a bit for the A7 that's all :good:
raystef66 said:
No issues my friend, relax
It's just a twrp zip for our flashaholic-souls :cyclops:
And it's a bit less handling than the universal installer or the manual method...you don't have to rename, set permissions, or whatever you have to do in the OP from iYTB. My method : just download and flash and you know it'll be ok !
I just molded it a bit for the A7 that's all :good:
Click to expand...
Click to collapse
Totally relaxed here, I was just curious, because I never had any issues.
On n6p, n7 and axon 7 it always works as described.
Installer and apk in one folder and good to go.
coremania said:
On n6p, n7 and axon 7 it always works as described.
Installer and apk in one folder and good to go.
Click to expand...
Click to collapse
Was that with the black YT? That's where I had a problem. The universal installer would always fail to install them. No problems with installing the non-themed apks.
Never bothered to check why though.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
marcdw said:
Was that with the black YT? That's where I had a problem. The universal installer would always fail to install them. No problems with installing the non-themed apks.
Never bothered to check why though.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
Yes, i always flash the black root version, no issue.
On my axon 7 rooted with magisk, btw.
Is there any benefit in using this over something like NewPipe?
NadavCE said:
Is there any benefit in using this over something like NewPipe?
Click to expand...
Click to collapse
Definitely, as this is the real YouTube with enhancements.
See the OP here.
http://forum.xda-developers.com/showthread.php?t=3560900
[APP][MOD] iYTBP - original YouTube app with background playback and removed ads
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Use Magisk to install the original and not TWRP.
Zip isn't working
Dodgexander said:
Zip isn't working
Click to expand...
Click to collapse
It is
When app doesn't appear on 1st boot, just reboot again.
Does this zip also removes currently installed youtube version from your phone?
Predatorhaze said:
Does this zip also removes currently installed youtube version from your phone?
Click to expand...
Click to collapse
Yes it does :good:
Hey I just happened to get a ZTE Axon 7 today and am also a dev of iYTBP lol. I can confirm the latest official works perfectly on this phone
raystef66 said:
Yes it does :good:
Click to expand...
Click to collapse
thanks bro,i really like this one!! great work,no bugs when playing in background.
btw can i flash this on stock firmware?without twrp...i just hate the original youtube
does this app get updates? the magisk version got more functions if im not wrong
Predatorhaze said:
does this app get updates? the magisk version got more functions if im not wrong
Click to expand...
Click to collapse
This one doesn't get updates. I ran it for ages and no problems so far. To which more functions do you refer?
If you want i can make a new one with the latest in it. But basically no big differences imo.
raystef66 said:
This one doesn't get updates. I ran it for ages and no problems so far. To which more functions do you refer?
If you want i can make a new one with the latest in it. But basically no big differences imo.
Click to expand...
Click to collapse
IYTB (vanced magisk?) on Oreo rom is able to have a floating window on top of other apps you use ate the same time,and it got a new minimize style.Only the floating window feature is a big ++ for me.I prefer IYTB as system app,and not a magisk module.

AOSP UI for Xperia M4 Aqua

Pure AOSP experience​This mod is packed with skymelon 9 with UI FIX.​ Mod is made of pure aosp System UI and modifed framework-res and Settings.​You can choose between root and rootless versions.​Make sure you make a backup before flashing anything!​Download:​AOSP UI​
Installation:
1. Boot to recovery (download latest recovery image HERE) and flash the file
2. Wipe dalvik cache and cache
3.Reboot​Thanks to @AndyPhoenix9879 for his kernel​
Deleted
deleted
trpsl said:
no, it's not
Click to expand...
Click to collapse
No, not the files. I meant my post, as there is no way to delete posts on xda. Sorry for the inconvenience.
BTW: I Just installed UI and it's looking good, thanks for sharing it.
Hey, it's me again. I don't like to double post, but I noticed there is an issue with my phone with the 4G Icon. Looks like the one in the screenshots is different with mine. I don't really care that much, but is there a way I can fix this ?
Hitman951 said:
No, not the files. I meant my post, as there is no way to delete posts on xda. Sorry for the inconvenience.
BTW: I Just installed UI and it's looking good, thanks for sharing it.
Click to expand...
Click to collapse
oh lol
Hitman951 said:
Hey, it's me again. I don't like to double post, but I noticed there is an issue with my phone with the 4G Icon. Looks like the one in the screenshots is different with mine. I don't really care that much, but is there a way I can fix this ?
Click to expand...
Click to collapse
strange.. did you have some other mod installed before you flashed this one?
trpsl said:
oh lol
strange.. did you have some other mod installed before you flashed this one?
Click to expand...
Click to collapse
Hmm, I think way back I had changed my dpi from 320 ( I think ) to 280 or something like that. Could also be the bulgarian language, maybe I should've installed it with english set on the phone. I don't bother that much tho
why does it take so long to flash? The battery has ran out even it was 100% when flash
rungxanu123 said:
why does it take so long to flash? The battery has ran out even it was 100% when flash
Click to expand...
Click to collapse
it takes maybe 10 seconds to flash. which version of twrp are you using?
trpsl said:
it takes maybe 10 seconds to flash. which version of twrp are you using?
Click to expand...
Click to collapse
I use twrp 3.0. About 4 hours and i had still seen the screen appear every boot, so i canceled it and flashed rom again, then flashed the kernel skymelon 9 (not with the asop ui pack) and it's ok now. Anyway, i still not have this asop ui yet
rungxanu123 said:
I use twrp 3.0. About 4 hours and i had still seen the screen appear every boot, so i canceled it and flashed rom again, then flashed the kernel skymelon 9 (not with the asop ui pack) and it's ok now. Anyway, i still not have this asop ui yet
Click to expand...
Click to collapse
flash this recovery, and then try to flash aosp ui.
(sorry for the late reply)
trpsl said:
flash recovery, and then try to flash aosp ui.
(sorry for the late reply)
Click to expand...
Click to collapse
Ok thanks. I will tell you if succeed
rungxanu123 said:
I use twrp 3.0. About 4 hours and i had still seen the screen appear every boot, so i canceled it and flashed rom again, then flashed the kernel skymelon 9 (not with the asop ui pack) and it's ok now. Anyway, i still not have this asop ui yet
Click to expand...
Click to collapse
you can find link to the latest recovery image in the first post. with that recovery everything should be fine.
the rootless version pass safetynet ?
KLinvisibleMAN said:
the rootless version pass safetynet ?
Click to expand...
Click to collapse
Doesn't seem to... Idk if it's because i'm on PexoRom V3 or because SkyMelon 9 Kernel
Is there a way to edit dropdown shortcuts like wifi/bluetooth/plane mode/Flashlight/etc icons?
edn4me said:
Doesn't seem to... Idk if it's because i'm on PexoRom V3 or because SkyMelon 9 Kernel
Is there a way to edit dropdown shortcuts like wifi/bluetooth/plane mode/Flashlight/etc icons?
Click to expand...
Click to collapse
use systemui tuner to rearrange tiles
Hi,
Can I use this mod with Concept-ify rom? I think I can't because of different kernel version, but I like the ui of this mod.
pepit0grillo said:
Hi,
Can I use this mod with Concept-ify rom? I think I can't because of different kernel version, but I like the ui of this mod.
Click to expand...
Click to collapse
yes you can, kernel is the same as on Concept-ify as far as i know.

Categories

Resources