Fix for twrp wie issue! - Sony Xperia M4 Aqua

In TWRP go to advanced -> fix permission and swipe to fix it. Dont turn selinux fix on!

No this is apparently dangerous and I'm not going to find out if it works

ardentis said:
No this is apparently dangerous and I'm not going to find out if it works
Click to expand...
Click to collapse
Sorry but what should be dangerous?
I mean you only fix some errors and the cache wipe is working
I tried it more than 5 times...

If you want,i could send you a video...

Pupskartoffel said:
Sorry but what should be dangerous?
I mean you only fix some errors and the cache wipe is working
I tried it more than 5 times...
Click to expand...
Click to collapse
There was a bug where if you fixed permissions with a Lollipop the rom would not boot. Im not sure if they fixed the issue but I guess I could try. Sorry for being so dismissive.

Related

Problem, Please Help!

Hi, I have problem on my Samsung SGT5830(Galaxy ACE). When i reboot my phone i pups up message " The process com.android.phone has stopped unexpectedly. Please try afain" but it pups up ones or twice, and stop puping up... My phone after that, working whitout problems... I can receive calls, sms, mms. Also I can call, send sms, mms... I can connect on WiFi, GPS is working too... What is a problem? What can I do? How to do it?
I got this prob once when I flashed 2.3.3 for the first time. I got frustrated and did a factory reset u can try but use this as a last resort
extremecupavac said:
Hi, I have problem on my Samsung SGT5830(Galaxy ACE). When i reboot my phone i pups up message " The process com.android.phone has stopped unexpectedly. Please try afain" but it pups up ones or twice, and stop puping up... My phone after that, working whitout problems... I can receive calls, sms, mms. Also I can call, send sms, mms... I can connect on WiFi, GPS is working too... What is a problem? What can I do? How to do it?
Click to expand...
Click to collapse
if you are on stock rom and have cwm recovery installled then it have fix permissions which might help you... but i heard that on cm7 roms it will create more problems [haven't tried it personally].. on stock this option work perfectly
madman_amit said:
if you are on stock rom and have cwm recovery installled then it have fix permissions which might help you... but i heard that on cm7 roms it will create more problems [haven't tried it personally].. on stock this option work perfectly
Click to expand...
Click to collapse
Yes I have stock rom, only my phone is rooted. It was all good until i did a main restart, and after that it start to creating problem...
extremecupavac said:
Yes I have stock rom, only my phone is rooted. It was all good until i did a main restart, and after that it start to creating problem...
Click to expand...
Click to collapse
well then flash CWM from here http://forum.xda-developers.com/showthread.php?t=1168417 (v4)or here http://forum.xda-developers.com/showthread.php?t=1291327 (v5) anyway both of them works. Flash them from recovery then set permissions
can i fu*k up something on my phone whit that?
extremecupavac said:
can i fu*k up something on my phone whit that?
Click to expand...
Click to collapse
what you want to fu*k up with that??
madman_amit said:
what you want to fu*k up with that??
Click to expand...
Click to collapse
I mean can it something go wrong... Can i kill totaly my phone...
extremecupavac said:
I mean can it something go wrong... Can i kill totaly my phone...
Click to expand...
Click to collapse
nope you just need to have cwm installed and go to recovery --> advanced--> Fix permissions --> then reboot the phone
madman_amit said:
nope you just need to have cwm installed and go to recovery --> advanced--> Fix permissions --> then reboot the phone
Click to expand...
Click to collapse
I did that and it don't help...
Factory Reset
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
Factory Reset
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
do not help... after factory reset it start to send that message...
extremecupavac said:
do not help... after factory reset it start to send that message...
Click to expand...
Click to collapse
Yes! I know that is stgang, but....
just go to into recovery. wipe data and cache..
nicgoh said:
just go to into recovery. wipe data and cache..
Click to expand...
Click to collapse
how to do it.. step by step... i am not expert in those things...
extremecupavac said:
how to do it.. step by step... i am not expert in those things...
Click to expand...
Click to collapse
i am sure you can google... search things which that post said

Update Joyos

Can anyone can able to update a joyos just want to clear status bar issues
Ahamed_10mini said:
Can anyone can able to update a joyos just want to clear status bar issues
Click to expand...
Click to collapse
If you've reported that issue in the JoyOS thread, wait for the developer to fix it.
Or you could do it yourself maybe...
Just don't be so impatient, people here don't get paid for their efforts, they do things in their own time and because they care about our phones...
Questions like this sound disrespectful and rude.
Reply
SmG67 said:
If you've reported that issue in the JoyOS thread, wait for the developer to fix it.
Or you could do it yourself maybe...
Just don't be so impatient, people here don't get paid for their efforts, they do things in their own time and because they care about our phones...
Questions like this sound disrespectful and rude.
Click to expand...
Click to collapse
I said to update only bt ur thinking a lot bt it was nice to help others i have made it whether we get money or not
cannot install JoyOS
I have installation problem.
I always stuck in wiping /system.
I have followed the instruction to install this OS but no success.
I have tried more than three times. Start with re-install my kernel.
have any ideas to solve this problem?
thx for helping me
Redownload the ROM, copy to sdcard
Enter CWM, factory reset, wip cache, wip dalvik cache,
Install the rom
Rempty said:
Redownload the ROM, copy to sdcard
Enter CWM, factory reset, wip cache, wip dalvik cache,
Install the rom
Click to expand...
Click to collapse
Had the same problem, tried above method, but now my X10 mini doesn't boot or charge.
Reply
Lord_Flaya said:
Had the same problem, tried above method, but now my X10 mini doesn't boot or charge.
Click to expand...
Click to collapse
hmm remove battery connector and again put it and try to charge wait a for 15 to 20 mini or better give to repair shop
Rempty said:
Redownload the ROM, copy to sdcard
Enter CWM, factory reset, wip cache, wip dalvik cache,
Install the rom
Click to expand...
Click to collapse
Cannot solve my problem :crying:
have more ideas?
c4bo3l said:
Cannot solve my problem :crying:
have more ideas?
Click to expand...
Click to collapse
Go into CWM, Mounts and Storage and format /system, /data and /cache, maybe that will help.
Found the solution
I searched in Q&A section, and i found the solution here http://forum.xda-developers.com/showpost.php?p=33923401&postcount=4
---------- Post added at 03:35 PM ---------- Previous post was at 03:29 PM ----------
SmG67 said:
Go into CWM, Mounts and Storage and format /system, /data and /cache, maybe that will help.
Click to expand...
Click to collapse
+1 :good:

[q] emmc problem (yp-g70 intl 8gb) [FIXED]

Hey guys, i just want to ask if it's possible to fix emmc corrupt in yp-g70? okay, so i took it to a technician because it is hardbricked, he was able to fix it however the problem is, he said that the emmc is corrupt and the its status now is "bootlooping" he resurrected the device but it's stuck in bootloop because emmc is corrupt, and he said there is no solution unless the emmc is replaced. so, is there any possible way to fix this? or roms that can fix the bootloop? any reply would be much appreciated.
sewel wolcott
any advice?
Have you tried to flash the stock ROM?
TheKryptonite said:
Have you tried to flash the stock ROM?
Click to expand...
Click to collapse
The device itself is still at the technician, he just updated me the status of my device, i'll try to flash the stock rom if it fixes the emmc problem. by the way, thanks for the reply sir!
TheKryptonite said:
Have you tried to flash the stock ROM?
Click to expand...
Click to collapse
It may need a little more than that. If that doesn't work, try this:
Boot to cwm
Wipe data
Wipe system
Wipe cache, and dalvik
Boot into download mode
Reflash stock
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
goldflame09 said:
It may need a little more than that. If that doesn't work, try this:
Boot to cwm
Wipe data
Wipe system
Wipe cache, and dalvik
Boot into download mode
Reflash stock
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
Click to expand...
Click to collapse
OK, sir, i'll try that when i have my device tomorrow. thanks!
hellfrozer said:
Hey guys, i just want to ask if it's possible to fix emmc corrupt in yp-g70? okay, so i took it to a technician because it is hardbricked, he was able to fix it however the problem is, he said that the emmc is corrupt and the its status now is "bootlooping" he resurrected the device but it's stuck in bootloop because emmc is corrupt, and he said there is no solution unless the emmc is replaced. so, is there any possible way to fix this? or roms that can fix the bootloop? any reply would be much appreciated.
Click to expand...
Click to collapse
If he means that there are bad blocks on the emmc, then he is right; your device will not be usable unless the board is replaced. The only other possible way to work around that would to be moving partitions around with fdisk, but there would still be unusable space on the storage chip.
Mevordel said:
If he means that there are bad blocks on the emmc, then he is right; your device will not be usable unless the board is replaced. The only other possible way to work around that would to be moving partitions around with fdisk, but there would still be unusable space on the storage chip.
Click to expand...
Click to collapse
OK, sir, but, if flash it with odin, with the stock rom and PIT files, and check re-partition, would it be able to fix the issue? or it's still unusable?
just askin' .
i still don't have my device, it's still in him (technician).
How'd this happen anyway?
hellfrozer said:
OK, sir, but, if flash it with odin, with the stock rom and PIT files, and check re-partition, would it be able to fix the issue? or it's still unusable?
just askin' .
i still don't have my device, it's still in him (technician).
Click to expand...
Click to collapse
If there are bad blocks, it means that the chip hardware itself is burnt out, so writing to it will not fix it.
TheKryptonite said:
How'd this happen anyway?
Click to expand...
Click to collapse
OK, so before my device was hardbricked. i was trying to install the PACMAN ROM, by the way, i was on CHIP ROM that time, i followed the procedure,unfortunately the installation was aborted. After so much frustration i deleted the "/emmc", i thought that would fix it, but because of my stupidity, i admit that. all of my files in internal was wiped out and it cannot mount the internal itself. so i flashed a rom using odin. However, with the blessing of Bad Luck Brian, odin got freezed, so i eject my device from my computer and then turned it off, after that it wont boot anymore. so, now, i decided to bring it to a technician to be repaired using JTAG because i dont have the proper resources to do the resurrection.
OK, so he [technician] said that he was able to resurrect it but somehow, it is bootlooping, because the emmc is corrupt.
and now i already have my device, i will try to do "fdisk" as what Sir Mervodel suggested to partition my internal.
Mevordel said:
If there are bad blocks, it means that the chip hardware itself is burnt out, so writing to it will not fix it.
Click to expand...
Click to collapse
OK, sir. but i will try the method of using "fdisk" that you suggested lately. i hope that'll fix it.
It's already fixed!
Hey guys, it's already fixed, maybe the technician misunderstood the problem, all i did was to boot into recovery and wipe cache then factory reset. it's already fixed now,
Anyway, thanks for all your response!
TheKryptonite
goldflame09
and especially Mevordel!
:cyclops:
hellfrozer said:
Hey guys, it's already fixed, maybe the technician misunderstood the problem, all i did was to boot into recovery and wipe cache then factory reset. it's already fixed now,
Anyway, thanks for all your response!
TheKryptonite
goldflame09
and especially Mevordel!
:cyclops:
Click to expand...
Click to collapse
Good thing it wasn't a hardware issue!
Make sure you're more careful this time around. I should know, lol.
TheKryptonite said:
Make sure you're more careful this time around. I should know, lol.
Click to expand...
Click to collapse
:laugh: OK, dude. lesson learned. i'll try the PACMAN ROM later. Hope it's successful. :fingers-crossed:

[Q] SuperSU problem

i have rooted my phone and upgrade to slimbean 4.2.2.
and i got SuperSU, but when i launch it i need to update it and when i do that it says failed. reset your device and try again. so i did that and same thing came up.
i did try to reinstall it but that did not help. so how do i fix this?
sry if this has been posted. i looked into the forum before i posted this and didn't find any threads.
thextrememodzz said:
i have rooted my phone and upgrade to slimbean 4.2.2.
and i got SuperSU, but when i launch it i need to update it and when i do that it says failed. reset your device and try again. so i did that and same thing came up.
i did try to reinstall it but that did not help. so how do i fix this?
sry if this has been posted. i looked into the forum before i posted this and didn't find any threads.
Click to expand...
Click to collapse
First uninstall it,then reboot ur phone and then re-install the same from 'Play stores' and see
thextrememodzz said:
i have rooted my phone and upgrade to slimbean 4.2.2.
and i got SuperSU, but when i launch it i need to update it and when i do that it says failed. reset your device and try again. so i did that and same thing came up.
i did try to reinstall it but that did not help. so how do i fix this?
sry if this has been posted. i looked into the forum before i posted this and didn't find any threads.
Click to expand...
Click to collapse
i`ll try that. thanks for helping
that diden work..
any other suggestions?
Try a different nightly from slim. May be a bad build. Have you read the thread for info on this.
andrewwright said:
Try a different nightly from slim. May be a bad build. Have you read the thread for info on this.
Click to expand...
Click to collapse
yes i do, linK: http://forum.xda-developers.com/showthread.php?t=2060541
thextrememodzz said:
yes i do, linK: http://forum.xda-developers.com/showthread.php?t=2060541
Click to expand...
Click to collapse
Full Format of system,data and cache and flash again.
andrewwright said:
Full Format of system,data and cache and flash again.
Click to expand...
Click to collapse
flash again?
you mean i reinstall slim bean?
just did what you said. and nothing happend still need to update SU binary.
NVM! i figured it out.
Yes but format system and data and cache and preload and wipe dalvik cache too before you flash it. Is you're gapps good and the one use by others on this rom?.

Camera Busy: Unable to start.

I hope there is no more topics about this problem.
Sometimes a receive a message when I try to use the camera:
"Camera Busy: Unable to start. "
After a reboot it works. But the problem happens from time to time.
I read on the web that wipe the cache may solve the problem.
I did that and I am testing.
But this is a software or hardware issue?
Try uninstalling updates to Camera app. Clear the app's Cache and Data. Reboot. Update the Camera app and run it.
Read this thread - it helped fix it for me.
http://forum.xda-developers.com/showpost.php?p=63746175&postcount=10
Try this
Bruaca said:
I hope there is no more topics about this problem.
Sometimes a receive a message when I try to use the camera:
"Camera Busy: Unable to start. "
After a reboot it works. But the problem happens from time to time.
I read on the web that wipe the cache may solve the problem.
I did that and I am testing.
But this is a software or hardware issue?
Click to expand...
Click to collapse
Its a software issue and has been solved by squid2's kernel
Use this kernel it will nt only fix ur camera bt will improve the performance of ur phone!
ASKdroid said:
Its a software issue and has been solved by squid2's kernel
Use this kernel it will nt only fix ur camera bt will improve the performance of ur phone!
Click to expand...
Click to collapse
i was tried . but it won't work . then go back to CM12.1.
Mahesh8348 said:
i was tried . but it won't work . then go back to CM12.1.
Click to expand...
Click to collapse
Yes if kernel doesn't work! Custom rom is the only possible way to fix this camera issue!

Categories

Resources