Hi,
I have ordered Beelink GTQ TV Box. Once I have received it, I turned it on. The box has updated to Android 5.1.1, but after the restart it has turned off after running around 4 minutes. Then, I need to turn it on manually. It happens all the time. I have wiped the device and no help. I have asked the support from Dealsmachine where I have bought it - they have offered me the firmware download. I have flashed the firmware via sd card, then did factory restore, but nothing helps. The time, when the box turn off is always the same. When the box is in the recovery mode, it will not turn off. So it seems, it is software issue. I'm unable to download older firmware to check. Any idea how to fix/identify the causes of these problems?
Related
Hi guys,
I was trying to upgrade to Android 2.3 on my Sharp Softbank 005SH but the phone got stuck in the Major Update screen and I don't know what to do now. Anyone with experience please help!
The phone is updated to the latest firmware that is required for this major update, Build No. S0900.
So, I decided to go for the PC upgrade option, Downloaded the driver and the Update tool, waited for many hours for the download to complete, then started the procedure.
I then switched the phone to Fast File Transfer USB mode, checked for update, it discovered that an update was available and asked me to restart the phone.
After restarting, I ran the Update tool but it gets stuck at the screen where it checks if the phone is connected in the above USB mode.
Meanwhile, the phone won't reboot in normal mode. If I pull the USB cable out, it says "Update failed. After a reboot the phone will work again." Well, it doesn't because I can't reboot. Even tried removing the battery for a couple of minutes...
same to you
just update my dm009sh from s0300.....failed
guaiwujia said:
same to you
just update my dm009sh from s0300.....failed
Click to expand...
Click to collapse
I've sent my phone back to Japan. Hopefully, they'll fix it there soon.
Obviously, the problem occurs because the phone and/or the OS are not in Japanese.
Hello,
I've bought a new device - Evolveo StronPhone Q4, MTK6589 based phone. The stock ROM is basically vanilla Android 4.2.1. I've successfully rooted it using Framaroot.
Then I've created scatter file using MTK Droid Tools (all partitions that were formated were ext4).
Then I've decided to create a backup before I start playing with it, so I've tried backing up flash using SP Flash Tool (using Readback), it was running fine and downloaded approx. 20%, then crashed. I've tried that once or twice more times, always failed. Now after I plug it in, windows display "This device can perform faster" and FlashTool won't detect the device. If I connect it without battery with VolDn key pressed, FlashTool detects it and I get S_DL_GET_DRAM_SETTING_FAIL.
However, the phone boots fine, just GPS/Wifi/BT is not working. (No GPS icon appers, and I get errors like BT_open: WMT turn on BT fail in dmesg). Looks like an issue with kernel/HW issue.
Any ideas what could have gone wrong and how to fix it?
In the meantime, I've asked manufacturer for a stock FW image, but I'm not sure it helps...
Update: Okay, I have no clue what just happened. However I've unrooted, reverted everything I've modified on the phone so far so I'll be able to return it to manufacturer as "deffective"... And just for the curiosity connected it to the computer and tried downloading ROM one more time. And it succeeded - I'll upload the ROM once I get access to faster internet connection. I've removed the battery (phone was stuck in Preloader mode because I cancelled ongoing RAM test.), put it back and now everything works.
So, it looks like everything is fine now, however I'd love to know what happened, if you have any clue, please let me know!
fw problem
Mrkvak said:
Hello,
I've bought a new device - Evolveo StronPhone Q4, MTK6589 based phone. The stock ROM is basically vanilla Android 4.2.1. I've successfully rooted it using Framaroot.
Then I've created scatter file using MTK Droid Tools (all partitions that were formated were ext4).
Then I've decided to create a backup before I start playing with it, so I've tried backing up flash using SP Flash Tool (using Readback), it was running fine and downloaded approx. 20%, then crashed. I've tried that once or twice more times, always failed. Now after I plug it in, windows display "This device can perform faster" and FlashTool won't detect the device. If I connect it without battery with VolDn key pressed, FlashTool detects it and I get S_DL_GET_DRAM_SETTING_FAIL.
However, the phone boots fine, just GPS/Wifi/BT is not working. (No GPS icon appers, and I get errors like BT_open: WMT turn on BT fail in dmesg). Looks like an issue with kernel/HW issue.
Any ideas what could have gone wrong and how to fix it?
In the meantime, I've asked manufacturer for a stock FW image, but I'm not sure it helps...
Update: Okay, I have no clue what just happened. However I've unrooted, reverted everything I've modified on the phone so far so I'll be able to return it to manufacturer as "deffective"... And just for the curiosity connected it to the computer and tried downloading ROM one more time. And it succeeded - I'll upload the ROM once I get access to faster internet connection. I've removed the battery (phone was stuck in Preloader mode because I cancelled ongoing RAM test.), put it back and now everything works.
So, it looks like everything is fine now, however I'd love to know what happened, if you have any clue, please let me know!
Click to expand...
Click to collapse
hello,
could you please upload somewhere original fw for Evolveo Strongphone Q4. im in bootloop now
Hi all,
can you hel me with strongphone Q4, do you know any better rom for this phone?
Maybe by PM in czech? ...
Hi guys
My N9 just arrived by courier, Plugged it in, cranked it on.
Tells me straight away there is an OTA update, 297.9MB ok cool, go.
Download doesn't seem to be running (have an LTE pocket wifi which pulls in 30+MB/s)...... keep waiting, no progress. Have restarted tablet a couple of times, same effect.
Have also tried to tether directly from phone...same....
is the server pooped?
Has your N9 downloaded the update now? I have the same problem with my wlan N9.
Fixed with factory reset
I had this problem today. I was able to boot into recovery by holding down on bootup. Then I chose to do a factory reset, and the next time I set up the device the download worked.
Yes I tried that 3 times or so but didn't work. Then, today in the morning it was finished so I guess there had been a server proplem.
Ok hello i'm pretty new to this, but I have looked around quite a bit and nothing seems to help. So my friend gave me this Galaxy S6 edge(more specifically the SM-G925I - TCE Mexico (Telcel)). The issue with this phone is that it freezes then restarts randomly and it also doesn't recognize the carrier. It recognizes that theres a sim but the carrier is not recognized and I don't have access to mobile data. The bigger issue at the moment is the crashes though. I already tried resetting to factory defaults, booting in safe mode, wiping the cache and wiping all the data/ factory reset from the recovery menu. I thought it was the OS or something so I installed twrp wiped EVERYTHING(pretty sure I did since when I rebooted twrp told me if I was sure since I had no os installed) and installed the official 7.0 firmware update from sammobile. It was previously 6.0.1 and I thought having a different version might fix the issue. Yet the issue remains, within a few minutes of me using it it freezes, turns off, and reboots. At this stage I might you might think its a hardware issue but when i'm in recovery or download mode it doesn't turn off. Also I decided to leave it charging when I left for work and when I came back it hadn't turned off at all. I checked the uptime and it was at 7 hours and yet within a few minutes of me checking the settings it froze and turned off. I'm not really sure what to do anymore i'll probably take it to a service center to see whats up but I wanted your opinions first. Thanks.
Sochez said:
Ok hello i'm pretty new to this, but I have looked around quite a bit and nothing seems to help. So my friend gave me this Galaxy S6 edge(more specifically the SM-G925I - TCE Mexico (Telcel)). The issue with this phone is that it freezes then restarts randomly and it also doesn't recognize the carrier. It recognizes that theres a sim but the carrier is not recognized and I don't have access to mobile data. The bigger issue at the moment is the crashes though. I already tried resetting to factory defaults, booting in safe mode, wiping the cache and wiping all the data/ factory reset from the recovery menu. I thought it was the OS or something so I installed twrp wiped EVERYTHING(pretty sure I did since when I rebooted twrp told me if I was sure since I had no os installed) and installed the official 7.0 firmware update from sammobile. It was previously 6.0.1 and I thought having a different version might fix the issue. Yet the issue remains, within a few minutes of me using it it freezes, turns off, and reboots. At this stage I might you might think its a hardware issue but when i'm in recovery or download mode it doesn't turn off. Also I decided to leave it charging when I left for work and when I came back it hadn't turned off at all. I checked the uptime and it was at 7 hours and yet within a few minutes of me checking the settings it froze and turned off. I'm not really sure what to do anymore i'll probably take it to a service center to see whats up but I wanted your opinions first. Thanks.
Click to expand...
Click to collapse
*#0*# test if all sensors,cameras,speakers,etc are working.Test wifi,gps,bluetooth.Try to see if charging port is clean inside...
Ive had this i605 since a few months after it came out, brand new. rooted it within 5 min as i got home. only issue i've had with it was the power button and usb port didn't work but i replaced those.
2 nights ago, running cm13 last official version. was just on facebook and i got the boot logo. it's happened before so i didnt think anything of it. except this time, it was boot looping the first logo. ok, something happened to OS, so i went into recovery, erased all but external SD card and installed slimkat, this time it would get to the slimkat logo about 2% and reboot. fine.. back to stock and reroot. INstalled MC3 stock. when it came back up and it did, it hangs on verizon activation until wifi only.. great. go to status, baseband unknown. no radio, bluetooth and wifi still work, but doesn't detect simcard. this phone is my only internet connection as i tether. trying to root with casual and now, even though i can go in download mode and usb is found and i can flash with odin stock rom all day, once i get to android home screen, my computer is not seeing the USB file system, mtp, but it is charging. anyone had this happen before?
this phone has never had an OTA update, was on 4.1.2 when i got it
Update: Loaded back fresh MC3 stock build to start over again, saw a post somewhere about accessing hidden menu,
Go to Phone Dialer and type *#22745927
Enable Hidden Menu
Go to Phone Dialer and type *#7284#
Set USB to PDA, save and exit, rebooted back into android and was able to get USB access for CASUAL to root. FInally got it rooted, in TWRP newest version
Funny thing when it booted back into android before CASUAL root, it showed SDCrd and Internel memory. SDCArd was fine, but internal memory was -1636237227 so i'm thinking that memory is a problem, because when i reloaded stock mc3, it would never boot up after odin, i had to go into recovery and do a factory reset and then it would boot into Android, but no USB access, could get USB access in download mode, but not in recovery or android. I just found it weird.
Now, when i load my custom rom, it just hangs at the ROMs loading screen and just stays there. I'm really thinking this is a memory problem and i'm really upset about it. I'm wondering if anyone knows how to just reset the memory, without messing with EFS.