hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
1. Download jdk 32bit only from here, Android sdk from here, Unlock root from here, adb_usb.ini from here and A87 drivers from here.
2. Install jdk
3. install Android sdk, after installing open sdk manager form star and select "android sdk platform-tools" and "google usb driver" unselect the rest, click install packages. After installing put the adb_usb.ini file in "C:\Users\(your PC name)\.android"
4. Now on your phone goto settings>applications>development>enable usb debugging and connect usb cable, it should say usb debugging mode and show a little green android icon on the topleft (if not then reinsert cable or re enable usb debugging)
5. Windows will detect the device, let it stabilize then extract A87 drivers to a location say "C:/drivers"
6. Now goto start type "device manger" open device manager, you wil find "android adb interface" right click upgrade drivers and lead it to a location of your extracted drivers, do the same with other devices you get with an exclamation icon. (dont worry if you dont find other devices, its fine)
7. Install Unlock root, open it and click root, it wil ask for the device select micromax A87 and Your done !!!
8. Press Thanks !! Have a nice day !!
Aditya Kaushik said:
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
1. Download jdk 32bit only from here, Android sdk from here, Unlock root from here, adb_usb.ini from here and A87 drivers from here.
2. Install jdk
3. install Android sdk, after installing open sdk manager form star and select "android sdk platform-tools" and "google usb driver" unselect the rest, click install packages. After installing put the adb_usb.ini file in "C:\Users\(your PC name)\.android"
4. Now on your phone goto settings>applications>development>enable usb debugging and connect usb cable, it should say usb debugging mode and show a little green android icon on the topleft (if not then reinsert cable or re enable usb debugging)
5. Windows will detect the device, let it stabilize then extract A87 drivers to a location say "C:/drivers"
6. Now goto start type "device manger" open device manager, you wil find "android adb interface" right click upgrade drivers and lead it to a location of your extracted drivers, do the same with other devices you get with an exclamation icon. (dont worry if you dont find other devices, its fine)
7. Install Unlock root, open it and click root, it wil ask for the device select micromax A87 and Your done !!!
8. Press Thanks !! Have a nice day !!
Click to expand...
Click to collapse
Go here for details :
Micromax A87
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
Click to expand...
Click to collapse
I too faced the same problem a while ago :crying:, but at last got its solution...
Do this only if you Have CWM(clockworks mod) installed on your device...
If not then goto - http://forum.xda-developers.com/showthread.php?t=1987020
And find it there...
Firstly, Get a rooted custom/stock ROM and save it in your device's sd card,
Then goto ClockWorks Recovery ( First power off your device, then hold volume up and power key untill superfone logo displays to get into recovery menu), (scroll up and down for three times to enable the power button with vol. up and down key)open 'mounts and storage' menu
Then choose 'format/system' . After the completion Goto main menu and choose 'install zip from sd card' -> choose zip -> And install it.
And after completion, Reeboot. DONE, your got a rooted device...!
How to root XOLO X1000
***Disclaimer - You accept full responsibility if by using these directions your device explodes, leaves you for another owner, or just decides it doesn't like you anymore. I am not responsible!***
************************************************** *****
***CREDITS***
I did not create Impactor nor Snappea, I just managed to figure out Impactor works to obtain root on this device and many others
ALL credit for Cydia Impactor tool belongs only to its developer Saurik
************************************************** *************
Make SURE you have USB DEBUGGING turned on
Next, you will need suitable drivers, there is a way to install drivers elsewhere but a much quicker way is to go to www.Snappea.com and install this program on your PC, it is just a program that allows your phone to better interact with your PC but the bonus is that it can install generic drivers (including that much needed ADB driver) for almost any device! Once snappea is installed simply connect your phone to your PC when Snappea prompts you to.
Finally go here:
http://www.cydiaimpactor.com/
Download Impactor and unzip the file, once unzipped simply open the Impactor folder and double click the Impactor Application. This will pop up a box that says Cydia Impactor at top on your screen. You should see a drop down menu that currently says "# drop SuperSU su into /system/xbin/su". Make sure that command is showing in the drop down box and press the start button on the right side.
Once this completes you will just need to download your favorite Superuser or SuperSU app onto your device then update binary and you are rooted!
Good luck!!
In most cases an android phone user comes to know about ROOTING and Installing Custom Recovery like CWMR, TWRP and Philz......Popular System on a chip manufacturer(Soc) like Qualcomm has been in the industry since 1985 and has a strong foundation and many of the flagship companies like sam, sony, lg, are using their Soc's. So somewhat developers are very eager to develop for these devices and let the other manufacturer down in their developer community(But not now a days).
So here we present the Ultimate guide for the media tek device owners on how to root and install Clock Work Mod Recovery for their phones.
ROOTING
One of the Best tools for rooting your phone is using FRAMAROOT which was developed by alephzain (Senior Member at XDA)
Just use any one of the exploit, Try the available exploit......IT will not ruin your Phone
After rebooting if you see the SUPER SU APP in your app drawer, you have successfully ROOTED your Phone.
BACKUP YOUR IMEI
First of all take backup of your imei for that you have to install 5iromtoolbox
1)Open the app
2)Press backup IMEI
3)Connect your phone with USB cable and go to your pc
4)Open your sd card through windows explorer or whatever you use
5)Seek the folder /sdcard/5irom/imeibackup/
6)Copy the imeibackup folder to your pc to a folder that you will not by accident format ^_^
7)You are ok...now you can make whatever you like...
To restore your IMEI
1)Take your imeibackup folder from your pc
2)Paste it on your sd card on folder /sdcard/5irom/imeibackup/
3)Open the 5iromtoolbox
4)Press Restore IMEI and restart your phone!!
INSTALLING CUSTOM RECOVERY[IN THIS TUT CLOCK WORK MOD]
Install MTK Drivers for your phone if officially available or else follow the steps bellow.
Installing Drivers for any android phone
First of all download Pdanet+
1) Enable USB Debugging in Settings -> Developer Options (If you dont have Developer Options in your settings tap 7 times the build number inside about phone, Then you will get the Developer Option)
2) Connect your Phone with a Data cable and run the Pdanet setup >> choose others and continue all the way
IF SETUP FAILS
1) Do it another time with other usb options available in your phone like changing to MTP, Camera(PTP), or by turning on the USB Storage, Do it several times it should install the Drivers
IF SETUP SUCCEEDS
1) Untick the ticked check-box and click finish.
Download MTK Droid Root & Tools developed by rua1(Senior Member at XDA)
1) Connect your phone to computer.
2) Run the tool
View attachment 2785013
View attachment 2785014
View attachment 2785015
3) Press Root.... Wait for few Secs
4) Go to Root, backup & Recovery
5) Select "To use boot from phone". and select Recovery and Boot
6) If asked for any permission select yes.
And at last the device will reboot into recovery if you were inside the recovery, you have successfully done your job
This is an expanded version of rua1 review in his site......
Warning: You are using this software at your own risk. You may be violating your warranty.
I've tested the root routine at my new DG110 and it works fine.
After rooting device pls. start the superuser.apk and enter "yes" to update the .apk
How to root :
Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
Install the drivers for your phone
Extract the AUTO ROOT folder from the .rar download
Connect your phone to PC using a USB cable
Run run.bat from the extracted MTK6589 Auto Root folder
Press any key and wait while it roots your phone
After finished, now reboot
Enjoy your rooted phone and verify your root access with root checker !
jsk001 said:
Warning: You are using this software at your own risk. You may be violating your warranty.
I've tested the root routine at my new DG110 and it works fine.
After rooting device pls. start the superuser.apk and enter "yes" to update the .apk
How to root :
Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
Install the drivers for your phone
Extract the AUTO ROOT folder from the .rar download
Connect your phone to PC using a USB cable
Run run.bat from the extracted MTK6589 Auto Root folder
Press any key and wait while it roots your phone
After finished, now reboot
Enjoy your rooted phone and verify your root access with root checker !
Click to expand...
Click to collapse
That's true for root?
And for flashing without losing the IMEI? Do I do?
In addition, I must first make the first root or flashing?
didn't work for my dg110, kingoroot.apk worked ok.
anyone know which devices are similar for porting ?
Steps:
1. Download Mtk droid Tools, SP Flash Tools, drivers for your phone, (no need, just connect your e311 to pc and choose connect as buil in cd rom and install drivers).
2. People having windows 8/8.1/7 first of all disable driver signature verification(google it, pretty easy)
e.g. on windows 8/8.1 go to bottom right corner,choose setting on charm bar,select change pc settings, update and recovery,go to recovery,advance start up,restart, advance startup/troubleshooting, disable driver signature verification by pressing 7 on keyboard(you need physical keyboard, touch keyboard won't be there).
3. READBACK ROM BACKUP
i. open/run as administrator MTK droid Tools, your phone should be switched on, connect it,accept usb connection on phone, let the droid tools detect it and show its specifications.(make sure usb debugging is enabled)
ii. click on blocks map, a window tile of block info will pop up. Note down or better save it using notepad++/screenshot by pc or ms word file, you need values of preloader and userdata/(some other phones may show FAT,don't panic,it's just your internal sd partition) under scatter column(also note the values under size column for backing up a single item like recovery, for entire rom you only need scatter column values of preloader and userdata/FAT).
iii. alongwith block info, a tile asking to creat scatter file will pop up, create it. This will be our scatter file for SP Flash Tools.
iv. Disconnect usb, switch off phone. you may close mtk droid tools, it will be needed after next step.
4. Open/Run SP Flash Tools as administrator,
i. click scatter loading and select previously created scatter file.
ii. click on readback tab on sp flash tools..then click on add button.
iii. double click on the item (it should be checked in the selection box)and save it as ROM_0(default) or ROM_1 , it does not matter.This will be a large file approx 3.2 GB so save it to a dedicated folder on pc not usb.
iv. next readback block address tab will open, under start address value will be like 0x00000000, leave it as it is(don't change to 0x0), under length use the value under scatter column of userdata/FAT previously noted in block info..Make note that value entered should be like 0x1234567 and not like 0x0001234567. the zeros after 0x should be removed and only till first non zero value after that and middle zeros like 120458000 shoud be written as it is. The length value may be numeric for some phones but e311 will show like 0x000CDF7000, Don't worry enter it like 0xCDF7000. This is just example not actual value, i assume each phone will show different value.
v. after entering length and pressing ok, click readback and now connect switched off phone.
vi. after that click ok and wait for readback to complete. It will take about 7-11 minutes depending on your pc processor. a green check will appear on completion.
vii. close Sp flash tools, disconnect usb. switch on phone.
5. Open MTK droid tools,connect switched on phone,select the root,backup,recovery tab.
6.Click*To*process*file*ROM_*from*Flash*Tool.
7. *Select*the*ROM_1*file*you*saved*in*the*step*above*in*the*window*that*pops*up.
8.*Wait*for*MTK*Droid*tools*to*finish*copying.
9. *When*prompted*to*make*CWM*Recovery*automatically,*click*Yes*or*No*.*If*you*click*Yes,*you'll*need*to*select
the*Recovery.img*from*the*window*that*pops*up.This will make cwm recovery, take backup of stock recovery.
10. Your Rom backup will be in MTK DROID TOOLS/backup folder. You can now flash cwm created in backup with Sp Flash Tools and also root your phone by flashing supersu.
hem.crz said:
Steps:
1. Download Mtk droid Tools, SP Flash Tools, drivers for your phone, (no need, just connect your e311 to pc and choose connect as buil in cd rom and install drivers).
2. People having windows 8/8.1/7 first of all disable driver signature verification(google it, pretty easy)
e.g. on windows 8/8.1 go to bottom right corner,choose setting on charm bar,select change pc settings, update and recovery,go to recovery,advance start up,restart, advance startup/troubleshooting, disable driver signature verification by pressing 7 on keyboard(you need physical keyboard, touch keyboard won't be there).
3. READBACK ROM BACKUP
i. open/run as administrator MTK droid Tools, your phone should be switched on, connect it,accept usb connection on phone, let the droid tools detect it and show its specifications.(make sure usb debugging is enabled)
ii. click on blocks map, a window tile of block info will pop up. Note down or better save it using notepad++/screenshot by pc or ms word file, you need values of preloader and userdata/(some other phones may show FAT,don't panic,it's just your internal sd partition) under scatter column(also note the values under size column for backing up a single item like recovery, for entire rom you only need scatter column values of preloader and userdata/FAT).
iii. alongwith block info, a tile asking to creat scatter file will pop up, create it. This will be our scatter file for SP Flash Tools.
iv. Disconnect usb, switch off phone. you may close mtk droid tools, it will be needed after next step.
4. Open/Run SP Flash Tools as administrator,
i. click scatter loading and select previously created scatter file.
ii. click on readback tab on sp flash tools..then click on add button.
iii. double click on the item (it should be checked in the selection box)and save it as ROM_0(default) or ROM_1 , it does not matter.This will be a large file approx 3.2 GB so save it to a dedicated folder on pc not usb.
iv. next readback block address tab will open, under start address value will be like 0x00000000, leave it as it is(don't change to 0x0), under length use the value under scatter column of userdata/FAT previously noted in block info..Make note that value entered should be like 0x1234567 and not like 0x0001234567. the zeros after 0x should be removed and only till first non zero value after that and middle zeros like 120458000 shoud be written as it is. The length value may be numeric for some phones but e311 will show like 0x000CDF7000, Don't worry enter it like 0xCDF7000. This is just example not actual value, i assume each phone will show different value.
v. after entering length and pressing ok, click readback and now connect switched off phone.
vi. after that click ok and wait for readback to complete. It will take about 7-11 minutes depending on your pc processor. a green check will appear on completion.
vii. close Sp flash tools, disconnect usb. switch on phone.
5. Open MTK droid tools,connect switched on phone,select the root,backup,recovery tab.
6.Click*To*process*file*ROM_*from*Flash*Tool.
7. *Select*the*ROM_1*file*you*saved*in*the*step*above*in*the*window*that*pops*up.
8.*Wait*for*MTK*Droid*tools*to*finish*copying.
9. *When*prompted*to*make*CWM*Recovery*automatically,*click*Yes*or*No*.*If*you*click*Yes,*you'll*need*to*select
the*Recovery.img*from*the*window*that*pops*up.This will make cwm recovery, take backup of stock recovery.
10. Your Rom backup will be in MTK DROID TOOLS/backup folder. You can now flash cwm created in backup with Sp Flash Tools and also root your phone by flashing supersu.
Click to expand...
Click to collapse
Bro can you plz tell how to install drivers ,mtk droid tool is not detecting e311.along with download links of drivers. Mine windows is xp
Sent from my Micromax E311 using XDA Free mobile app
akashjasani13 said:
Bro can you plz tell how to install drivers ,mtk droid tool is not detecting e311.along with download links of drivers. Mine windows is xp
Sent from my Micromax E311 using XDA Free mobile app
Click to expand...
Click to collapse
Installing Drivers for Micromax Cannvas Nitro 2 E311:
(A) Enable usb debugging on E311:
1. Go to settings, about phone, tap on build number 7 times to enable developer options.
2. Select developer option, check box for usb debugging, thats it.
3. Also allow installation of apps from unknown sources under Personal/security in settings menu...useful for installation of apps that are not from play store.
(B) Install Drivers:
1. Connect Switched on or even switched off phone with pc via usb cable. It will automatically install driver.
If step 1 does not work for you then
2. Connect your phone via usb, it will be connected as MTP Device. Change it to connect as Built in CD Rom. It will show as cd drive/micromax e311.
3. Open it, there will be drivers folder alongwith usb guide(useless).
4. Inside drivers folder, there is drivers auto installer,within that folder you will find drivers with installation instruction on excel sheet.
It should work but even if it does not then search google for auto drivers installer for micromax devices or pda net or drivers for specific model no. like e311, a311, etc.
MTK DROID Tools Not reading phone:
1. Just check if you have usb debugging allowed or not. If not then do so as explained above.
2. When you connect switched on phone via usb to pc, MTK Droid Tools should be running as administrator(not necessary on windows Xp).
3. After running MTK Droid Tools and connecting usb, a message will pop up on phone asking to allow/accept usb debugging for droid tools, allow/accept it.... wait for few seconds and MTK droid tools will show info for E311 as connected.
In case of difficulties search mediafire.com for drivers, picture guide for readback backup,root and recovery, cwm image and MT6592_Android_scatter uploaded by me. I was trying to post them here but XDA won't allow it as it's my 2nd post only and they allow it after 10 posts only. I'm giving the file names as searching will be easier i hope
1. How_to_Get_Stock_ROM_RomDump_of_Mediatek_MT6582_via_MTK_Droid_Root_and_Tools_-_GSM-Forum.pdf
2. Micromax-E311_150522__recovery_150724-082456.img
3. MT6592_Android_scatter.txt
4.How_to_make_a_ROM_backup_Dump_using_Sp_Flash_Tool_Read_Back.pdf
5. Supersu
6. Drivers for Micromax E311
hem.crz said:
Installing Drivers for Micromax Cannvas Nitro 2 E311:
(A) Enable usb debugging on E311:
1. Go to settings, about phone, tap on build number 7 times to enable developer options.
2. Select developer option, check box for usb debugging, thats it.
3. Also allow installation of apps from unknown sources under Personal/security in settings menu...useful for installation of apps that are not from play store.
(B) Install Drivers:
1. Connect Switched on or even switched off phone with pc via usb cable. It will automatically install driver.
If step 1 does not work for you then
2. Connect your phone via usb, it will be connected as MTP Device. Change it to connect as Built in CD Rom. It will show as cd drive/micromax e311.
3. Open it, there will be drivers folder alongwith usb guide(useless).
4. Inside drivers folder, there is drivers auto installer,within that folder you will find drivers with installation instruction on excel sheet.
It should work but even if it does not then search google for auto drivers installer for micromax devices or pda net or drivers for specific model no. like e311, a311, etc.
MTK DROID Tools Not reading phone:
1. Just check if you have usb debugging allowed or not. If not then do so as explained above.
2. When you connect switched on phone via usb to pc, MTK Droid Tools should be running as administrator(not necessary on windows Xp).
3. After running MTK Droid Tools and connecting usb, a message will pop up on phone asking to allow/accept usb debugging for droid tools, allow/accept it.... wait for few seconds and MTK droid tools will show info for E311 as connected.
In case of difficulties search mediafire.com for drivers, picture guide for readback backup,root and recovery, cwm image and MT6592_Android_scatter uploaded by me. I was trying to post them here but XDA won't allow it as it's my 2nd post only and they allow it after 10 posts only. I'm giving the file names as searching will be easier i hope
1. How_to_Get_Stock_ROM_RomDump_of_Mediatek_MT6582_via_MTK_Droid_Root_and_Tools_-_GSM-Forum.pdf
2. Micromax-E311_150522__recovery_150724-082456.img
3. MT6592_Android_scatter.txt
4.How_to_make_a_ROM_backup_Dump_using_Sp_Flash_Tool_Read_Back.pdf
5. Supersu
6. Drivers for Micromax E311
Click to expand...
Click to collapse
Thank you for the expanation i already had install driver from built cd rom but adb android interface/htc android interface is showing exclamation mark on device manager
Sent from my Micromax E311 using XDA Free mobile app
Use kingroot. Its 100% working. Try it.
Sent from my Micromax E311 using XDA Free mobile app
What about custom rom for this device
Sent from my Micromax E311 using XDA Free mobile app
Can any one please give me Custom rom for this device ?
stuck
after i flashed cm 12.1 from one of the threads using cwm everything was working fine but after i made a data wipe it won't turn on . and it had low battery so after a while it turned off . now even the pc is not recognizing it . i don't know what to do , someone please helpppp