i have Motorola Moto E, 1st gen. Lollipop 5.1 Indian Varient.
while formatting my phone stuck on bootloop ( M logo )
im able to enter in fastboot/recovery mode.
tried formatting data/wipe cache partation in recovery option.
& also tried flashing custom roms, but every time while flashing error coming that " INVALID PIV SIGNED IMAGE"
In writing section "PREflash validation failed " & "REMOTE FAILULER" error coming...
i need help to unbrick my moto e, why im facing this error? any solution?? & plz provide step by step information if availble...
DurgeshK said:
i have Motorola Moto E, 1st gen. Lollipop 5.1 Indian Varient.
while formatting my phone stuck on bootloop ( M logo )
im able to enter in fastboot/recovery mode.
tried formatting data/wipe cache partation in recovery option.
& also tried flashing custom roms, but every time while flashing error coming that " INVALID PIV SIGNED IMAGE"
In writing section "PREflash validation failed " & "REMOTE FAILULER" error coming...
i need help to unbrick my moto e, why im facing this error? any solution?? & plz provide step by step information if availble...
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the expert help you need, I'm going to move this thread to your specific device Q&A forum. You'll find the experts there. Good luck!
DurgeshK said:
i have Motorola Moto E, 1st gen. Lollipop 5.1 Indian Varient.
while formatting my phone stuck on bootloop ( M logo )
im able to enter in fastboot/recovery mode.
tried formatting data/wipe cache partation in recovery option.
& also tried flashing custom roms, but every time while flashing error coming that " INVALID PIV SIGNED IMAGE"
In writing section "PREflash validation failed " & "REMOTE FAILULER" error coming...
i need help to unbrick my moto e, why im facing this error? any solution?? & plz provide step by step information if availble...
Click to expand...
Click to collapse
Well give this guide a try :
http://forum.xda-developers.com/showthread.php?t=2759495
You'll be back again to kitkat from there you can flash a custom recovery and then any lollipop rom.
Good Luck
Related
So i have 4 XT910S phones. I wanted to put a EU or US firmware on them so they were no longer branded and didnt have all these apps on them.
So here is what I did.
downloaded 4.0.4 CN firmware (unbranded)
Rooted and backed up CDROM file and CID file
Flashed the CN firmware on the XT910S
Using the BT TOOLS trick it boots up fine
Flased CID.IMG through command prompt in windows
Now when it boots it goes straight to fastboot with the error
Invalid CG OTV (CG: cdrom): Invalid SP data
Invalid CG HAB (CG: cdrom, status: 0X0056)
Invalid CG OTV (CG: cdrom)
I tried restoring my original CDROM file but it says the image is larger than the partition.
the original backup CDROM file is 217,088 KB and the one that i am finding with EVERY other firmware is 216,832 KB
I have even tried getting backups of all the CDROM files off the other phones and they are all the same size
The original firmware is 67.42.17.xt910s.skt.en.kr but I cannot find it anywhere to download
HELP
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
faheemakbar18 said:
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
Click to expand...
Click to collapse
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
N3401 said:
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
Click to expand...
Click to collapse
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
still he need to root and install bmm otherwise his only option to boot is bp tools
welder73 said:
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
Click to expand...
Click to collapse
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
N3401 said:
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
Click to expand...
Click to collapse
I´m not sure,maybe you'll need to install BMM to boot normally.
razr xt910 problem, help required urgently.
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Have you tried matt's utility to restore stock ROM? See http://www.droidrzr.com/index.php/topic/764-gsm-xt910-razr-utility/
If successfully restored to stock then root using the utility, but do not install safe strap from the utility. You should then download and install the latest version of safestrap (version 3.65) and install it. See http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v365-2013-11-13/
I've read that only safestrap works correctly with cm11. So, now use safestrap to install cm11 (and gapps if you wish) in slot 2 (I've read that cm11 works best in slot 2).
Sent from my Droid RAZR Maxx (XT912, spyder) using TapaTalk.
mugheeshjaved said:
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Click to expand...
Click to collapse
follow the link i gave above in 2nd post
Please some one help me out, did somebody know how to unbrick my moto e 2nd g xt1506 phone which is not power on when connect with my laptop mobile get on and show the fastboot mode. I unable to get proper stock rom to unbrick, but i still tried lot of methods using moto toolkit flashing some of stock and custom rom by flasing but unfortunately it shows that remote failure failed to erase partition something like that.
Any help meto getover it and give detailedgide.
Thanking you
Its because you are not flashing the right firmware.
Try flashing only recovery. Then download any custom rom. Wipe all partition and flash the ROM.
If you face any further problem ask me here.
I tried twrp but the message shows that recovery flashing failed fastboot from recovery any other recovery please suggest with links
Kumarbhav said:
I tried twrp but the message shows that recovery flashing failed fastboot from recovery any other recovery please suggest with links
Click to expand...
Click to collapse
Personally message me at fb you can find my profile link in about section of me... I will surely help you out
Still have the same problem
Sent from my Mi 4i using XDA Forums Pro.
after updating my moto e2 from 5.0 to 6.0 it s not showing any form of network
i have tried reboot options
please help me
So, here is the problem i am facing with my moto E
I followed the tutorials from this site and had flashed my MOTO E to stock ROM 3-4 times due to different reasons, i was successfully able to do that using the STOCK ROM that i had for android kitkat 4.4.4. Last month i updated my moto E to android lollipop. After that it kept asking me to install a 12MB update which i tried installing quite some times but was not able to install. It showed some error while installing the same. So, i started ignoring that. A couple of days ago i once again tried to install that update and after installing the update when the phone turned on, it logged on into FASTBOOT MENU saying:
hab check failed for boot
failed to validate boot image
Fastboot reason: Fall-through from normal boot mode
So, i thought Flashing it once again might solve the issue. When i tried flashing it, on the command screen it gives ERROR for 4 files i.e. boot.img, system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 saying::
<bootloader> invalid signed image
<bootloader> preflash validation failed
And on my phone screen it says "Invalid PIV signed image"
For all other instructions it says OKAY
Now it is again and again turning ON into this fastboot mode only...
Since i already had flashed my moto using the same custom rom , i think the files must be okay...
PLEASE HELP :'(
Why did you flashed 4.4.4 and then ota updated to 5.1 ? This process should've bricked your device in the first place.
Anyway 5.1 stock image files are available, did you tried flashing them? (fastboot mode)
-z3r0- said:
Why did you flashed 4.4.4 and then ota updated to 5.1 ? This process should've bricked your device in the first place.
Anyway 5.1 stock image files are available, did you tried flashing them? (fastboot mode)
Click to expand...
Click to collapse
sorry, i didn't knew that i shouldn't update my phone after installing the stock rom. No i haven't tried flashing my phone with android 5.1 stock file, i thought maybe flashing my phone with android 4.4.4 will downgrade my phone back to kitkat. Will try it now...will be helpful to me if you could get me a link for android 5.1 stock file as well, i tried finding the same, but it says for moto e2 which comes originally with lollipop but mine comes with android 4.4, its so confusing for me which stock file to download....
thanks for the help
Here : http://forum.xda-developers.com/showthread.php?t=2755857
"RetailDSDS" - Is for Indian version
-z3r0- said:
Here : http://forum.xda-developers.com/showthread.php?t=2755857
"RetailDSDS" - Is for Indian version
Click to expand...
Click to collapse
tried it, still giving the same error, preflash validation error :'(
Hi there,
My moto e 2nd gen got stuck in bootloader and won't boot.
The monitor displays as below:
**********************************************
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
EROOR: Failed to pass validation, backup fastboot
Fastboot Reason: Fall-through from normal boot mode
BL:
Baseband: M8916_2020629.41.03.21.51R SURNIA_RECTA_CUS
Product/Variant: surnia XT1527 8GB P3
Serial Number:
CPU:
eMMC:
DRAM
Console [NULL]: null
Battery OK
Device is LOCKED. Status Code: 0
Software status: Official
Connect USB Data cable
**************************************************
In the Recovery Mode display, I see "qe 0/0" which I learned from the other thread that it means the device has never been rooted.
Below is how this happened;
I used the app called KingRoot.
But the app says failed to root the device.
My phone acted weird so I uninstalled KingRoot.
Then I tried to remove the .exe file of KingRoot but failed somehow.
Right after I just turned on some secure feature (which warns the user that the app may be harmful?) of the device, the device went black and displayed the bootloader screen.
Below is what I have done so far:
Wipe cache partition (successful), then Reboot the system (Failed)
Wipe data/factory reset (successful), then Reboot the system(Failed)
Apply update from ADB with the stock Rom I found in the [http://firmware.center/firmware/Motorola/Moto E (2nd gen-2015)/Stock/XT1527/] but received error as below,
***********************************************
Finding update package...
Opening update package...
Verifying update package...
E:footer is wrong.
E:signature verification failed.
Installation failed.
************************************************
Then, I flashed three image files (recovery, boot, bootloader) using fastboot command (without unlocking bootloader).
I did not use the bootloader unlocking command.
So I thought the flashing would failed but somehow succeeded only with recovery.imag.
I believe my device has never been rooted and the bootloader has never been unlocked.
Is it possible that KingRoot has modified some system files even when the device has never been rooted and the bootloader has never been unlocked?
And how can I fix my bricked moto e?
Could someone help me out on this please? :crying:
quicksand99999 said:
Hi there,
Click to expand...
Click to collapse
Flash stock firmware. BTW you asked in the wrong thread. This is for moto e1
drs22 said:
Flash stock firmware. BTW you asked in the wrong thread. This is for moto e1
Click to expand...
Click to collapse
Hi Thank you for the reply and pointing-out.
I re-posted the thread in E 2015.
Regarding flashing stock rom, I flashed three image files and two of them failed due to the older version.
Is it possible to flash the entire files without unlocking the bootloader?
I have got marshmallow stock rom and have never tried to flash.
Hope you reply me back in my thread in Moto E 2015 forum.
Hello,
I was wondering if some could help me please. I wanted to flash RR Rom 6.0 on my BLA-L09(I think that what's it is) phone.
I was able to unlock my boot loader, and flash TWRP my device but my dumb s*** flashed TWRP to my file system use FLASH SYSTEM instead of FLASH RECOVERY. Now, I can't fix it ?. I know I can use sideload so I'm not panicking just yet however I know I messed up the file system.
Could someone tell me what file system system I should be using (fat, exfat, ext4, etc...) and what to do to get this think to boot backup.?
I've tried and side loading "update_full_BLA-L29_hw_la.zip" stock ROM but no luck... I keep getting this error message:
"check_write_data_to_partition,write data error
Update_huawei_pkg_from_ota_zip: update package from zip failed
Updated process ended with error: 9"
HELP.!!!
me too..... following searching for a solution
Shandroid_94 said:
me too..... following searching for a solution
Click to expand...
Click to collapse
If you find anything, let me know.!
Just boot to fastboot, flash RR to system and TWRP to recovery_ramdisk?