XT910(S) Need Help, Very Desperate - Motorola Droid RAZR

So i have 4 XT910S phones. I wanted to put a EU or US firmware on them so they were no longer branded and didnt have all these apps on them.
So here is what I did.
downloaded 4.0.4 CN firmware (unbranded)
Rooted and backed up CDROM file and CID file
Flashed the CN firmware on the XT910S
Using the BT TOOLS trick it boots up fine
Flased CID.IMG through command prompt in windows
Now when it boots it goes straight to fastboot with the error
Invalid CG OTV (CG: cdrom): Invalid SP data
Invalid CG HAB (CG: cdrom, status: 0X0056)
Invalid CG OTV (CG: cdrom)
I tried restoring my original CDROM file but it says the image is larger than the partition.
the original backup CDROM file is 217,088 KB and the one that i am finding with EVERY other firmware is 216,832 KB
I have even tried getting backups of all the CDROM files off the other phones and they are all the same size
The original firmware is 67.42.17.xt910s.skt.en.kr but I cannot find it anywhere to download
HELP

---

your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s

---

faheemakbar18 said:
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
Click to expand...
Click to collapse
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).

---

N3401 said:
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
Click to expand...
Click to collapse
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.

---

still he need to root and install bmm otherwise his only option to boot is bp tools

---

welder73 said:
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
Click to expand...
Click to collapse
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.

---

N3401 said:
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
Click to expand...
Click to collapse
I´m not sure,maybe you'll need to install BMM to boot normally.

---

razr xt910 problem, help required urgently.
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...

---

Have you tried matt's utility to restore stock ROM? See http://www.droidrzr.com/index.php/topic/764-gsm-xt910-razr-utility/
If successfully restored to stock then root using the utility, but do not install safe strap from the utility. You should then download and install the latest version of safestrap (version 3.65) and install it. See http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v365-2013-11-13/
I've read that only safestrap works correctly with cm11. So, now use safestrap to install cm11 (and gapps if you wish) in slot 2 (I've read that cm11 works best in slot 2).
Sent from my Droid RAZR Maxx (XT912, spyder) using TapaTalk.

---

mugheeshjaved said:
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Click to expand...
Click to collapse
follow the link i gave above in 2nd post