I have a Motorola XT 910 that I bought and still use in India. I installed the wrong firmware. Details as given below:
Android version 4.1.2
Build 9.8.2O-124_SPUEM-14
System version 982.124.14.XT910.Retail.en.EU
I am trying to flash it with SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_ASIA_RETAIL_HKTW.xml which seems to the correct version. However I get AP Fastboot Flash Mode (S) (Flash Failure 0A.77). I tried using both RSD lite (which gave a error on cdt.bin_signed and also installing from external storage (sd card). I think I also tried adb (sideload) which stopped at 92%. Can someone help me with going back to the correct version ..
I want to get back to the Asian firmware.
sam09910 said:
I have a Motorola XT 910 that I bought and still use in India. I installed the wrong firmware. Details as given below:
Android version 4.1.2
Build 9.8.2O-124_SPUEM-14
System version 982.124.14.XT910.Retail.en.EU
I am trying to flash it with SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_ASIA_RETAIL_HKTW.xml which seems to the correct version. However I get AP Fastboot Flash Mode (S) (Flash Failure 0A.77). I tried using both RSD lite (which gave a error on cdt.bin_signed and also installing from external storage (sd card). I think I also tried adb (sideload) which stopped at 92%. Can someone help me with going back to the correct version ..
I want to get back to the Asian firmware.
Click to expand...
Click to collapse
You have everything here
http://forum.xda-developers.com/showthread.php?t=3023837
Sent from my LG G4
Related
Hello togehter,
I have problems updating my Razr. Since i removed (and not freezed) bloatware from my Razr I am not able to install updates. I tried to solve the problem by doing a full wipe and restore to factory settings. Unfortunately it didnt work.
Since i did the restore i am on the version 651.73.30.XT910 and didn' receive any updates until yesterday. There i got the update notification for 651.167.26.XT910. I downloaded it and startet the installation but this failed at 1/4 of the progress bar.
Has anyone an idea what to do to be able to install updates again?
Thx very much
Ole
Ole, the OTA update will first verify the validity of the OTA zip file and then runs a number of dependency checks on the system to ensure that the environment it is updating is exactly as it expects it.
One of the functions it calls during the pre update process is apply_patch_check("/system/build.prop"). So, if you are using a custom rom OR have tweaked the build.prop it more then likely will fail this test. It also checks for the existence of a number of system files so if you have frozen/removed any system apps this will also trigger an update failure.
I suggest you try this first
1. unfreeze/restore ALL system applications.
2. download voodoo root keeper or similar and backup su/root with it. Then un-root.
3. Now try again, if it still fails then you could either push a stock buil.prop to /system or you could flash a stock rom again (don't forget to backup).
He said he removed the bloatware, and he's asking for help here, so I'm guessing he has no backup of it.
You need to flash this flashboot file which will restore to original factory settings with bloatware:
Branding: RETAIL en.EU
Market Segment: EuropeAustraliaEMEA
Version: 651.73.30
Android Version: 2.3.5
SPU: 11 M1-2
ROM Type: Service
Radio Version: U_03.1C.85P
Bootloader Version: 0A.67 (contained but not being flashed)
Webtop version: WT-2.0.0-113
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
source: http://forum.xda-developers.com/showthread.php?t=1362956
Guide to flashing here:
http://forum.xda-developers.com/showthread.php?t=1539192
Make sure battery is charged to full before flashing.
still not working
Hey guys,
when trying to flash the rom that you posted above, I get the error message from rsd lite "Failed flashing process. 1/11 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL; phone connected.
I installed ADB.. etc properly. What to do now?
Best Regards
Ole
hi
i have searched but couldnt find any answer .
i got dead xt910 , no chatging no led and on pc i get omap 4430 found.
i guess it bricked , but is there a way to wake it up ?
thx
trabel said:
hi
i have searched but couldnt find any answer .
i got dead xt910 , no chatging no led and on pc i get omap 4430 found.
i guess it bricked , but is there a way to wake it up ?
thx
Click to expand...
Click to collapse
i guess thats a nono ?
If you get OMAP4430 found (i.e NOT EVEN fastboot), then PM me.
xt910
I have the same problem, the device is determined for a few seconds as the "omap 4430" and disappears. Can you help me fix it?
helpful
do every thing told in this link
http://forum.xda-developers.com/showthread.php?t=2055839
amirali_b said:
do every thing told in this link
http://forum.xda-developers.com/showthread.php?t=2055839
Click to expand...
Click to collapse
With ubuntu can go to fastboot, somehow I see 1g size, but should be 16g
What i can do?
flash cdt failed =(
RiDER_RUS said:
With ubuntu can go to fastboot, somehow I see 1g size, but should be 16g
What i can do?
flash cdt failed =(
Click to expand...
Click to collapse
ok its have to flashable with RSD Lite now.
what is your phone model & last ROM installed on yore device?
you should flash your phone with fastboot file (do not update !! , just flash with last build which installed on your phone)
cdt.bin has some detail about emmc partition and start and end of them.SO you must have your Full flash fastboot file (i mean its format your internal memory too) and your fast boot must contain 'cdt.bin' (or 'cdt.bin_signed').
:good:
amirali_b said:
ok its have to flashable with RSD Lite now.
what is your phone model & last ROM installed on yore device?
you should flash your phone with fastboot file (do not update !! , just flash with last build which installed on your phone)
cdt.bin has some detail about emmc partition and start and end of them.SO you must have your Full flash fastboot file (i mean its format your internal memory too) and your fast boot must contain 'cdt.bin' (or 'cdt.bin_signed').
:good:
Click to expand...
Click to collapse
Motorola XT910, GB, Retail
Stock ROM android 2.3 before it bricks on update to android 4
I don't know what build it have
ok
Its not important whats your last build
just download a 4.0.4 GB retail fastboot and flash it on your phone with RSD lite and enjoy
amirali_b said:
Its not important whats your last build
just download a 4.0.4 GB retail fastboot and flash it on your phone with RSD lite and enjoy
Click to expand...
Click to collapse
xt910 is not defined in the windows as a device for RSD
!
even with fastboot mode connected?
Hi guys i am in bit of a pinch here.
I have a Moto Razr Xt909 which beloged to the carrier KIDDI. In order to get the sim Unlocked i flashed a firmware (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml) on it and even though i can get the phone started using BP tools and it seems to be working fine except for he fact that my PC is unable to detect its internal memory even though it is connected to it and all the drivers are installed.
Problem is that I have tried many times but i am unable to flash any new firmware on it like VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip.
Its a guess but I think that i can only flash firmwares from Europe now. All the other firwares i try to flash using RSD lite 6.0 don't complete and some get stuck at "boot.img" while others at "cdt.bin". I have been trying to flash multiple firmwares but till now all my efforts are in Vain :crying:
I want to flash other firmwares so please tell me how can i fix this issue.
System Version:
982.124.14.XT910.Retail.en.EU
The other details that my phone displays in about phone are attached as pic. please check the pic and guide me.
Thanks in advance
I see you've already erased your cid without backup, but if you have backupwhen try. If you wanna flash different region firmware on your Razr, you should root it when install BMM. Reboot to BMM & use Firmware Flashing to Backup CID and then erase it. After that you could try to flash XT912 JB via RSD or system + boot.img dump via BMM.
So i have 4 XT910S phones. I wanted to put a EU or US firmware on them so they were no longer branded and didnt have all these apps on them.
So here is what I did.
downloaded 4.0.4 CN firmware (unbranded)
Rooted and backed up CDROM file and CID file
Flashed the CN firmware on the XT910S
Using the BT TOOLS trick it boots up fine
Flased CID.IMG through command prompt in windows
Now when it boots it goes straight to fastboot with the error
Invalid CG OTV (CG: cdrom): Invalid SP data
Invalid CG HAB (CG: cdrom, status: 0X0056)
Invalid CG OTV (CG: cdrom)
I tried restoring my original CDROM file but it says the image is larger than the partition.
the original backup CDROM file is 217,088 KB and the one that i am finding with EVERY other firmware is 216,832 KB
I have even tried getting backups of all the CDROM files off the other phones and they are all the same size
The original firmware is 67.42.17.xt910s.skt.en.kr but I cannot find it anywhere to download
HELP
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
faheemakbar18 said:
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
Click to expand...
Click to collapse
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
N3401 said:
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
Click to expand...
Click to collapse
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
still he need to root and install bmm otherwise his only option to boot is bp tools
welder73 said:
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
Click to expand...
Click to collapse
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
N3401 said:
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
Click to expand...
Click to collapse
I´m not sure,maybe you'll need to install BMM to boot normally.
razr xt910 problem, help required urgently.
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Have you tried matt's utility to restore stock ROM? See http://www.droidrzr.com/index.php/topic/764-gsm-xt910-razr-utility/
If successfully restored to stock then root using the utility, but do not install safe strap from the utility. You should then download and install the latest version of safestrap (version 3.65) and install it. See http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v365-2013-11-13/
I've read that only safestrap works correctly with cm11. So, now use safestrap to install cm11 (and gapps if you wish) in slot 2 (I've read that cm11 works best in slot 2).
Sent from my Droid RAZR Maxx (XT912, spyder) using TapaTalk.
mugheeshjaved said:
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Click to expand...
Click to collapse
follow the link i gave above in 2nd post
So, here is the problem i am facing with my moto E
I followed the tutorials from this site and had flashed my MOTO E to stock ROM 3-4 times due to different reasons, i was successfully able to do that using the STOCK ROM that i had for android kitkat 4.4.4. Last month i updated my moto E to android lollipop. After that it kept asking me to install a 12MB update which i tried installing quite some times but was not able to install. It showed some error while installing the same. So, i started ignoring that. A couple of days ago i once again tried to install that update and after installing the update when the phone turned on, it logged on into FASTBOOT MENU saying:
hab check failed for boot
failed to validate boot image
Fastboot reason: Fall-through from normal boot mode
So, i thought Flashing it once again might solve the issue. When i tried flashing it, on the command screen it gives ERROR for 4 files i.e. boot.img, system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 saying::
<bootloader> invalid signed image
<bootloader> preflash validation failed
And on my phone screen it says "Invalid PIV signed image"
For all other instructions it says OKAY
Now it is again and again turning ON into this fastboot mode only...
Since i already had flashed my moto using the same custom rom , i think the files must be okay...
PLEASE HELP :'(
Why did you flashed 4.4.4 and then ota updated to 5.1 ? This process should've bricked your device in the first place.
Anyway 5.1 stock image files are available, did you tried flashing them? (fastboot mode)
-z3r0- said:
Why did you flashed 4.4.4 and then ota updated to 5.1 ? This process should've bricked your device in the first place.
Anyway 5.1 stock image files are available, did you tried flashing them? (fastboot mode)
Click to expand...
Click to collapse
sorry, i didn't knew that i shouldn't update my phone after installing the stock rom. No i haven't tried flashing my phone with android 5.1 stock file, i thought maybe flashing my phone with android 4.4.4 will downgrade my phone back to kitkat. Will try it now...will be helpful to me if you could get me a link for android 5.1 stock file as well, i tried finding the same, but it says for moto e2 which comes originally with lollipop but mine comes with android 4.4, its so confusing for me which stock file to download....
thanks for the help
Here : http://forum.xda-developers.com/showthread.php?t=2755857
"RetailDSDS" - Is for Indian version
-z3r0- said:
Here : http://forum.xda-developers.com/showthread.php?t=2755857
"RetailDSDS" - Is for Indian version
Click to expand...
Click to collapse
tried it, still giving the same error, preflash validation error :'(