I write to you what happened to me but I doubt you can do anything ... :crying::crying::crying:
I was with a European device with version 121, with the desire to upgrade to mm. downloaded the file and manually forced device started entering into twrp recovery rather than stocks. the update is gone, has found errors but continued alone until then to reboot. the problem is here as no signs of life: I can do nothing in terms of video there is nothing and I have no way to get in fast mode to work.
What now???
listen to your opinion, thanks
what happens if you turn your phone off and connect it with pressed volume- button to your pc?
bamserl said:
what happens if you turn your phone off and connect it with pressed volume- button to your pc?
Click to expand...
Click to collapse
I'm not a newbie... still nothing happens ... what should not be there in fastboot it or in recovery mode
Piè_Nexus said:
downloaded the file and manually forced device started entering into twrp recovery rather than stocks.
Click to expand...
Click to collapse
Piè_Nexus said:
I'm not a newbie...
Click to expand...
Click to collapse
how could i know that?
Honor 7 to root b140 B133 twrp device was brick . fastboot mode is not taken now . please please help me
volume + usb cable I tried to negative
volume - usb cable I tried to negative
volume + power I tried to negative
volume + volume - power I tried to negative
I do not know how to speak English. I am writing via Google Translate. Sorry .
There just does not sound vibration image display device is expected cmd coal writes
netegitmen said:
Honor 7 to root b140 B133 twrp device was brick . fastboot mode is not taken now . please please help me
volume + usb cable I tried to negative
volume - usb cable I tried to negative
volume + power I tried to negative
volume + volume - power I tried to negative
I do not know how to speak English. I am writing via Google Translate. Sorry .
There just does not sound vibration image display device is expected cmd coal writes
Click to expand...
Click to collapse
you have the same problem, dear ...
tomorrow I call for assistance, the device is dead !!!
netegitmen said:
Honor 7 to root b140 B133 twrp device was brick . fastboot mode is not taken now . please please help me
volume + usb cable I tried to negative
volume - usb cable I tried to negative
volume + power I tried to negative
volume + volume - power I tried to negative
I do not know how to speak English. I am writing via Google Translate. Sorry .
There just does not sound vibration image display device is expected cmd coal writes
Click to expand...
Click to collapse
hmm same goes to me
you can enable adb and use "adb reboot bootloader" command..it works
Dumaxa said:
you can enable adb and use "adb reboot bootloader" command..it works
Click to expand...
Click to collapse
hahaha at earlier time, i thought they phone just cannot enter fastboot but can enter OS..
I sent my device to Huawei Service Centre. because I think no point I keep it anymore. They currently check on it and they ask me to come again after 2 hours. I will feedback to you guys regarding the problem whether the Centre can give new phone or not I hope they can give 1 to 1 exchange.
within 2 hours, I got new phone from Huawei Malaysia. I pretend don't know and asked them why my phone become like that, they said it is hardware problem. Means that they don't know if we are wrongly flash the rom. So maybe you guys can try to send to Huawei for fast replacement.
My phone is in the service center now and they are saying: waiting for the replacement parts. I wonder what they are meaning.
Well, anyway it seems that I am going to get my phone back soon and without extra charge.
today Rollback package posted here consumer.huawei.com/fi/support/products/downloads/detail/index.htm?id=62323&pro=PLK-L01, you can use it for unbrick. it works fine for few 3more RU users on 4pda.ru.
install rollback package
install update.app file from B121
= should be working fine.
lockmunk said:
within 2 hours, I got new phone from Huawei Malaysia. I pretend don't know and asked them why my phone become like that, they said it is hardware problem. Means that they don't know if we are wrongly flash the rom. So maybe you guys can try to send to Huawei for fast replacement.
Click to expand...
Click to collapse
hi, i facing same issue with you. I from Malaysia too.
You phone under warranty when send to Huawei? PLease reply me TT
heehaa123 said:
hi, i facing same issue with you. I from Malaysia too.
You phone under warranty when send to Huawei? PLease reply me TT
Click to expand...
Click to collapse
yes
lockmunk said:
yes
Click to expand...
Click to collapse
Ooo..but my warranty already over
I guess they will call me throw the phone in rubbish bin...lol
Related
Hi, i have problem with zenfone 5. My brother tried to install new android using wireless update in phone(auto update function). So the update downloaded just fine and phone was turned off like its gonna install update but never turned on after this, i tried everything but cant turn it on. I cant even get asus logo, absolutly nothing. When i turn it on charger led dosent show up, tried to enter droidmode(vol up + power) for 10min but nothing. My first guess will be dead MBO but its really weird that this is happen in same time the update was, so probably is something software related.
Bump
Sent from my iOCEAN X7 using Tapatalk
asus zenfone 5 wont turn on
we have same problem, I tried to wipe cache partition for battery consumption purposes but i cancelled it, it seems to long to process erasing the cache so i cancelled it by holding power button + volume up then, wont turn on, itried to charge it, while holding power button + volume up the asus logo appear after that, the battery logo display appear (white side and black battery)
exzzy said:
Hi, i have problem with zenfone 5. My brother tried to install new android using wireless update in phone(auto update function). So the update downloaded just fine and phone was turned off like its gonna install update but never turned on after this, i tried everything but cant turn it on. I cant even get asus logo, absolutly nothing. When i turn it on charger led dosent show up, tried to enter droidmode(vol up + power) for 10min but nothing. My first guess will be dead MBO but its really weird that this is happen in same time the update was, so probably is something software related.
Click to expand...
Click to collapse
hi i am having the exactly same problem, could you tell how did you solve it??
Please i need help.
thank you
Start the phone by pressing power key + volume up and then select the option reboot worked for me!!
Thank you..
It worked for me also, :good:
That's bootloop dude. You need to flash your phone using fastboot. Flash the latest firmware .60 lollipop
Cannot start the phone
AkcezzInc said:
That's bootloop dude. You need to flash your phone using fastboot. Flash the latest firmware .60 lollipop
Click to expand...
Click to collapse
Whats 'the latest firmware .60'? can explain to me how to install it.
Facing the same problem(zenfone 5 not gettting started after update)
Even fastboot is not working for reboot
Pls help...!!!!
Thanx...!!!
skm14747 said:
Even fastboot is not working for reboot
Pls help...!!!!
Thanx...!!!
Click to expand...
Click to collapse
U need to flash it with new rom via fastboot with adb command... flash recovery.img first then flash new rom... .. whatever u want to flash jb,kk or loli but i recommend u to jb 4.3 .
Hi hendikj
hendikj said:
U need to flash it with new rom via fastboot with adb command... flash recovery.img first then flash new rom... .. whatever u want to flash jb,kk or loli but i recommend u to jb 4.3 .
Click to expand...
Click to collapse
Could you please explain how to do this tasks as i am new to all these words. pls.
U need to charge u r device Press power + up volume boot into boot loader...unlock bootloader then reboot from fastboot mode...it works for me..
fastboot is not getting open
hendikj said:
U need to flash it with new rom via fastboot with adb command... flash recovery.img first then flash new rom... .. whatever u want to flash jb,kk or loli but i recommend u to jb 4.3 .
Click to expand...
Click to collapse
i'm not able to open fastboot after update
Thanks. It Worked for me !
williamzerner said:
Start the phone by pressing power key + volume up and then select the option reboot worked for me!!
Click to expand...
Click to collapse
wont turn on..
does anyone has a problem phone wont turn on even pressing power key + volume up.you hear the sound when you connected to pc...like your phone is restarted.you only hear the sound but no display.no led light.no vibration.
this problem came when i unlock bootloader then i restart my phone then it didnt turn it on..sory for my bad english
davidjay26 said:
wont turn on..
does anyone has a problem phone wont turn on even pressing power key + volume up.you hear the sound when you connected to pc...like your phone is restarted.you only hear the sound but no display.no led light.no vibration.
this problem came when i unlock bootloader then i restart my phone then it didnt turn it on..sory for my bad english
Click to expand...
Click to collapse
same here! :crying:
Same problem here
davidjay26 said:
wont turn on..
does anyone has a problem phone wont turn on even pressing power key + volume up.you hear the sound when you connected to pc...like your phone is restarted.you only hear the sound but no display.no led light.no vibration.
this problem came when i unlock bootloader then i restart my phone then it didnt turn it on..sory for my bad english
Click to expand...
Click to collapse
Same over here too, did you solve your problem?
Hello my friends
i have problem with my huawei honor 5x (L21). When he ran and logged into a Google account, the phone is switched off and grabbed bootloop. I went to recovery I did a full wipe and now i cant turn on my phone. What i can do now? I know that i can install rom by ADB or by download mode but i cant went to fastboot mode and i cant do anything.
Help me please
Mitlex said:
Hello my friends
i have problem with my huawei honor 5x (L21). When he ran and logged into a Google account, the phone is switched off and grabbed bootloop. I went to recovery I did a full wipe and now i cant turn on my phone. What i can do now? I know that i can install rom by ADB or by download mode but i cant went to fastboot mode and i cant do anything.
Help me please
Click to expand...
Click to collapse
sounds like you got a bad phone
easy way to get to bootloader is power + volume down - this will bring up fastboot mode where you can flash TWRP
then power + volume up till the phone shuts off and switch to power + volume down again should boot to TWRP
once TWRP loads you have a bunch of options - restore a backup - flash a rom - format the partitions ...lots of thing you can do their
clsA said:
sounds like you got a bad phone
easy way to get to bootloader is power + volume down - this will bring up fastboot mode where you can flash TWRP
then power + volume up till the phone shuts off and switch to power + volume down again should boot to TWRP
once TWRP loads you have a bunch of options - restore a backup - flash a rom - format the partitions ...lots of thing you can do their
Click to expand...
Click to collapse
But problem is there, i can't turn on this phone
sometimes when connecting to a charge ignites me the red LED (this is rare). usually even when I connect the phone to the charger, there is no reaction.
Mitlex said:
But problem is there, i can't turn on this phone
sometimes when connecting to a charge ignites me the red LED (this is rare). usually even when I connect the phone to the charger, there is no reaction.
Click to expand...
Click to collapse
yeah it's broken, get a refund or return it to Honor for repair
are you sure?this is the ultimate way to repair this phone? maybe i will have happiness and I will turn on this phone
Mitlex said:
are you sure?this is the ultimate way to repair this phone? maybe i will have happiness and I will turn on this phone
Click to expand...
Click to collapse
you can try charging it overnight and see if it boots up
Sent from my KIW-L24 using Tapatalk
okay I will do this and we will see...
if i havent warranty, i can throw away the phone??
Mitlex said:
okay I will do this and we will see...
if i havent warranty, i can throw away the phone??
Click to expand...
Click to collapse
theirs not much you can do for a phone that doesn't turn on
I think I can throw away this phone. Maybe this phone have uncharged battery and now by the lack of system files, the phone can not be charged? you ever thought about that?
if I change the motherboard, the phone will work, right?
okay! I called to the site Huawei, they told me that the phone has a manufacturer's warranty by the IMEI number. I am from the Polish and if my phone was bought in Europe, I can make a phone warranty.
For all who will have the same problem, IMEI number can be found on the SD card slot.
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
celtic81 said:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
Click to expand...
Click to collapse
So the device is dead or unresponsive/bootloop?.
Sent from my SM-G925F
Dead pretty much sums it up yes.
celtic81 said:
Dead pretty much sums it up yes.
Click to expand...
Click to collapse
I think I read somewhere here usb jig is working on S6. Try your luck.
Sent from my SM-G925F
celtic81 said:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
Click to expand...
Click to collapse
1. What exactly is the phone doing now?
2. You deffinately cant boot into download mode? Try holding buttons for about 20 seconds and keep repeating?
3. Is the device detected when plugged into pc/smart switch?
4. Did you ever enable dev options and usb debugging?
callumbr1 said:
1. What exactly is the phone doing now?
2. You deffinately cant boot into download mode? Try holding buttons for about 20 seconds and keep repeating?
3. Is the device detected when plugged into pc/smart switch?
4. Did you ever enable dev options and usb debugging?
Click to expand...
Click to collapse
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
celtic81 said:
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
Click to expand...
Click to collapse
The first thing would be to flash stock.. but as you can't get into download mode its a bit tricky.
Have you tried to initialize phone with serial and imei with smart switch? This should detect phone and run emergency software fix?
I wouldnt attempt to remove my battery as you have to heat up the back to melt the glue to remove the glass.
Sometimes when the phone is in the state it is in its hard to get to download mode but it eventually does.
Try to get it powered off, keep holding power and vol down or just power for 20-40 seconds. It will eventually go off then try download mode.
celtic81 said:
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
Click to expand...
Click to collapse
If the phone still can be powered on but it's stuck somewhere during boot, can force reset by pressing power+vol down for 30s or more.
Sent from my SM-G925F
Not getting anywhere with the powering off/download mode, sounds defeatist, but looks like its done.
Does it mean anything that the phone doesn't recognise the power charger is connected either?
Rosli59564 said:
I think I read somewhere here usb jig is working on S6. Try your luck.
Click to expand...
Click to collapse
I think I will give the jig a go cant really lose any more than I already have. .
celtic81 said:
Not getting anywhere with the powering off/download mode, sounds defeatist, but looks like its done.
Does it mean anything that the phone doesn't recognise the power charger is connected either?
Click to expand...
Click to collapse
If it wont power on or recognise power charger that sounds like actually bricked phone or hardware problem. Safest way would be to just take it to service centre
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
celtic81 said:
I think I will give the jig a go cant really lose any more than I already have. .
Click to expand...
Click to collapse
The usb jig only works up to s4
callumbr1 said:
If it wont power on or recognise power charger that sounds like actually bricked phone or hardware problem. Safest way would be to just take it to service centre
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
The usb jig only works up to s4
Click to expand...
Click to collapse
Ok that's fair enough then. Will see if they can revive it.
What percentage chance of survival would you give it. 50/50 ?
celtic81 said:
Ok that's fair enough then. Will see if they can revive it.
What percentage chance of survival would you give it. 50/50 ?
Click to expand...
Click to collapse
Well as you said in your first post it was all stock and never rooted so they will more likely be able to revive it. Fingers crossed mate
callumbr1 said:
Well as you said in your first post it was all stock and never rooted so they will more likely be able to revive it. Fingers crossed mate
Click to expand...
Click to collapse
Thanks for all your replies its appreciated. Will let you know the outcome. .
celtic81 said:
Thanks for all your replies its appreciated. Will let you know the outcome. .
Click to expand...
Click to collapse
No problem mate keep me updated
callumbr1 said:
No problem mate keep me updated
Click to expand...
Click to collapse
Sorry for the delay in updating the outcome on this. Life got in the way. So basically the bootloader was bricked and needed rebuilding. JTAG was needed so was pretty lucky.
Thanks for all the responses...
I m able to got call but I can't see anything on screen it is just 1 month old....what to do now?? I see some scratch...
You rooted? Or like DarkAlpha.Sete asks:
DarkAlpha.Sete said:
What did you do before it stopped working?
(Did you make an update, tried unlocking bootloader, installing a custom recovery or custom ROM?)
Click to expand...
Click to collapse
If there's something that you are modifying, this could introduce bugs.. if you are stock unrooted, and if you can get download mode booted, just plug it into your pc and flash stock again.. moto I'm not as familiar with versus samsung, but I'm sure you can flash stock
sj
Sent from my rooted SM-G920P on stock Nougat 7.0 using [email protected] Pro
ZeroVirus said:
I m able to got call but I can't see anything on screen it is just 1 month old....what to do now?? I see some scratch...
Click to expand...
Click to collapse
What did you do before it stopped working?
(Did you make an update, tried unlocking bootloader, installing a custom recovery or custom ROM?)
No it's comes out from my pocket
ZeroVirus said:
No it's comes out from my pocket
Click to expand...
Click to collapse
Sorry but I don't understand what you mean by "it comes out from my pocket". Could you please explain in another way?
Also can you enter download/fastboot mode? Press and hold the power button and volume up(or down, I don't know what is your device) to enter it.
I see clear crack on LCD...i feel vibrate but I can't see anything
ZeroVirus said:
I see clear crack on LCD...i feel vibrate but I can't see anything
Click to expand...
Click to collapse
Well, sorry if I am wrong, but if you have a clear crack, and you don't see anything when you turn it on(but it vibrates), probably the problem is the LCD.
You can try following the steps that I wrote to enter fastboot. If you can enter it and make the last step show the serial number, but still don't see anything on the screen, then there is a high chance that the problem is the LCD.
Firstly, install the ADB and Fastboot drivers (if you already have them, skip this). The easiest method I know to install them is by using this installer
Make sure the device is powered off(holding power button by around 15 seconds should force a shut down if it is on)
Hold power button and volume down key to enter fastboot (or try?) until it vibrates
Now, connect the device to your PC with an USB cable
On the folder where you have the drivers, open a command window. (Shift + Right Click, then "Open command window here")
Type
Code:
fastboot devices
If a serial number is printed, then, the problem is the screen and not the device itself
I have attached a screenshot with an example(my device output).
If this doesn't work, then I'm sorry but I don't know much more to do.
I say again: I'm not any professional, all of this is my knowledge... I can be wrong
ZeroVirus said:
I m able to got call but I can't see anything on screen it is just 1 month old....what to do now?? I see some scratch...
Click to expand...
Click to collapse
Did what I said worked? You didn't reply for a long time...
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
You can reflash the rom with realme flash tool。（https://androidmtk.com/realme-flash-tool) ----Sorry for making a mistake earlier
Have you tried it?
yiyinglaohu said:
You can reflash the rom with MIFLASH。（https://c.mi.com/oc/miuidownload/detail?guide=1 ）or (http://www.miui.com/shuaji-393.html)
Click to expand...
Click to collapse
but the problem is that it is connecting and disconnecting every few seconds
Atalephinio said:
but the problem is that it is connecting and disconnecting every few seconds
Click to expand...
Click to collapse
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
you can find it on google
yiyinglaohu said:
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
Click to expand...
Click to collapse
how??? it is not responding when I am pressing on the buttons. It is hard bricked.
no fastboot no recovery. nothing - just black screen.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
grown_man said:
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
Click to expand...
Click to collapse
I wish it was my situation... I tried it nothing happens.
Atalephinio said:
I wish it was my situation... I tried it nothing happens.
Click to expand...
Click to collapse
then i suggest official repair services
Atalephinio: "but the problem is that it is connecting and disconnecting every few seconds""no fastboot no recovery. nothing - just black screen"
You probably only have EDL mode active. I think only MSM Download Tool will help you. However, but this is a paid service.
This is my opinion, but maybe someone more experienced should have a say.
Try to press three buttons (vol up- vol down- power) during 40 seconds aprox....
May only use 9008 mode.
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Atalephinio said:
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Click to expand...
Click to collapse
As I know that realme gt dont public the flash tool so we need contact to the services to get they help.
Same with you, I have some problem when I tried to flash twrp to realme phone. No luck and my phone became hard brick. But you can send an email to eu services of realme, they can help without any paid.
Good to know.