sd card got corrupted lost twrp backup and cant flash any new roms in twrp says md5 bad and odin wont let me flash new firmware says bad binary just rooted phone with cf auto root tried can get in to twrp and download but nothing i have tried works please help
Did you get the firmware from Sammobile?
yes tries several times
Are you able to do a fresh install with kies? That's always been my turn to when I have wacked issues....
I have a G925F.
I recently rooted it and wanted to try a custom ROM.
I rooted using the instructions in this thread: http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866
I tried to instal this ROM: http://forum.xda-developers.com/gal...edge-g925fxxu1aocv-v1-0-deodex-aroma-t3102974
After the ROM installation the phone was stuck on boot loop and I thought flashing the stock firmware would be a good idea. I wipe the phone on TWRP and tried to flash the stock firmware on ODIN but the process stops at NAND Write Start then it fails. I thought I needed the PIT file so I scoured through the forum and found that I could just delete the hidden.img. I did that, used the toolkit and tried flashing but stops at cache.img and fails and when I tried again it fails at NAND Write yet again. I have yet to find a forum on this. Could I get some help with this? Or could anyone provide me with the PIT file?
So I wanted to install the new Android 6.0 for a few days ago. I accidentally installed the 6.0 bootloader first, and the phone i just stuck. I have installed the newest TWRP recovery and tried flashing stock rom ANDROID 5.1.1 , i also tried use smart manager to emeregency recover the phone... nothing semms to work, please help me. Every time im trying to flash a new rom in odin i just says NAND WRITE START!! FAIL!!
Well make sure that your is usb is ok, try on diffrent computer that your device has not been connect because the marshmallow diffrent set of drives , Try re download the copy of the firmware it might get damaged during downloading. Try to use the old tested kies it is more stable...
Hi,
My s6 is currently bricked. I had a custom rom but i decided to go back to stock so i re flashed the stock firmware (DPGW).I flashed cf auto root and it failed. I tried flashing prerooted kernel and it also failed. I can't access stock or twrp recovery even though i have flashed em a couple of times. I tried flashing the stock rom as well and it fails at sboot.bin so i tried to flash the the files in the stock firmware zip one by one and i aslo failed there while flashing cache.img hidden.img cm.bin modem.bin and system.img as well. The only 2 that got flashed were recovery.img andthe boot.img. Also tried with kies 3 and smart switch but the device can't been recognized by them. It's been about 2 days trying to fix up this mess. I can charge the phone when the battery drains but the battery icon doesn't appear. When i plug the phone in the charger it just takes me to the samsung logo. So that's pretty much what is with my device. Someone has any ideas on how to restore the phone PLEASE!? Don't wanna disturb anyone but i've been trying for about 2/3 days now. Someone please help, thanks.
Hello, today I tried to install the stock firmware for my SM-G925F instead of having my rooted ROM, so that I could use apps like barclays and snapchat. This wouldn't work on odin, and my error is as follows:
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004>Complete(Write) operation fail
So because this didnt work, I used TWRP to wipe all data, hoping it would wipe the ROM, but it didn't. After I did this I went back into TWRP and tried to power off my device through there, but my device just froze, with the power off button highlighted. I think the kernel from the ROM doesn't allow booting from TWRP, but I can't boot normally. I can still go into download, TWRP and normal boot mode, though. Is there any chance you guys could give me some advice on how to get my device up and running again, even if it is on the ROM I used to root my device?
UPDATE: I tried to use odin again, but it is stuck with setting up connection, might be the drivers I used to try ADB sideloading the ROM, I'll see if i can fix this
DomiShady said:
Hello, today I tried to install the stock firmware for my SM-G925F instead of having my rooted ROM, so that I could use apps like barclays and snapchat. This wouldn't work on odin, and my error is as follows:
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004>Complete(Write) operation fail
So because this didnt work, I used TWRP to wipe all data, hoping it would wipe the ROM, but it didn't. After I did this I went back into TWRP and tried to power off my device through there, but my device just froze, with the power off button highlighted. I think the kernel from the ROM doesn't allow booting from TWRP, but I can't boot normally. I can still go into download, TWRP and normal boot mode, though. Is there any chance you guys could give me some advice on how to get my device up and running again, even if it is on the ROM I used to root my device?
UPDATE: I tried to use odin again, but it is stuck with setting up connection, might be the drivers I used to try ADB sideloading the ROM, I'll see if i can fix this
Click to expand...
Click to collapse
sboot.bin fail means your trying to downgrade which will not work. All you need to do is just flash the correct firmware.
By the sounds of it you have wiped the ROM off the phone. Which ROM was it?
Just flash this stock ROM again
https://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Then flash TWRP
https://dl.twrp.me/zerolte/
Then flash cf autoroot through odin.
https://download.chainfire.eu/737/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltexx-smg925f.zip
I tried to flash that rom, but it failed after hidden.img. Now my device is saying 'An error has occured while updating the device software'. Is it possible to use smart switch to recover from this? I don't mind having an unrooted phone.
DomiShady said:
I tried to flash that rom, but it failed after hidden.img. Now my device is saying 'An error has occured while updating the device software'. Is it possible to use smart switch to recover from this? I don't mind having an unrooted phone.
Click to expand...
Click to collapse
Either use smart switch
Or
http://forum.xda-developers.com/gal...t-files-multi-thread-download-t3171636/page10
Go to this thread to 1st page. Download g925f pit file zerolte_eur_open.
In odin options click pit and insert the downloaded pit file. Then insert the firmware and flash again. You will not get hidden.img fail and it will flash.