Hey people
I have a following problem with my ZTE Nubia z9 max (NX510J) :crying:
So where I wanted rooten it's the smartphone bricked
my question is how I can unbrick
please help because I have no idea
stony2015 said:
Hey people
I have a following problem with my ZTE Nubia z9 max (NX510J) :crying:
So where I wanted rooten it's the smartphone bricked
my question is how I can unbrick
please help because I have no idea
Click to expand...
Click to collapse
hi,
if you have the rom file or download it from web and use TWPR to flash it on the phone.
Senh0r said:
hi,
if you have the rom file or download it from web and use TWPR to flash it on the phone.
Click to expand...
Click to collapse
I get the not so handy in the download mode pc recognize the phone only Qualcomm HS-USB qdloader 9008 (COM5)
shows me even if the phone loads or not
I have the same proble, but I have Nubia z9 mini. Please help!
I thought the same. When my Z9 max (3GB RAM) stopped working afte flashing new rom (CM13 6.0) I try to drain the battery to the very end (USB - OTG connected) . Then plugged charger and wait... If home button is light up there is a chance. Hold power button up to 20 sec. with plugged charger in.
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
Hello,I have a lenovo S580 which has a snapdragon 200 MSM8212 chipset which got hard bricked when I flashed a custom ROM. When I plug it into the PC the LED flash starts blinks on the back but the PC does not detect it. Is there a way to restore it. Please Help.
Anyone please help.
Hello, I will describe my problem as follows
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switches off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start blinking and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
*Let's all be nice. If you won't write for me, show me the right places, and i'll thank you. And please thank me too if I've helped you.
realblackyz said:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode .
Read post for more :
https://www.pantomath.xyz/how-to-re...soft-bricked-coolpad-cool-1-c103-c106-device/
Good Luck
Teddy Lo said:
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode.
Read post for more :
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good Luck
Click to expand...
Click to collapse
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
realblackyz said:
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
Click to expand...
Click to collapse
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
https://www.youtube.com/watch?v=ibu6roR1j2I
Good luck
Teddy Lo said:
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good luck
Click to expand...
Click to collapse
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
realblackyz said:
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
Click to expand...
Click to collapse
Did it work with the EDL cable?
ulloa666 said:
Did it work with the EDL cable?
Click to expand...
Click to collapse
nope it's not working now i have a bricked phone + wasted 10$
i think i should really consider opening the phone for the test point method
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
big tuna said:
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
Click to expand...
Click to collapse
Clean flash fastboot rom.
big tuna said:
Hi all,
my redmi note 3 pro suddenly stoped working. It restarted flashed Mi start up screen once and died.
Red notification is flashing when charging, fastboot dosen't work.
When connected to pc for the first time in device manager says qualcomm hs-usb qdloader 9008 (com3)
if disconnected and connected again windows dosen't recognise it anymore.
It flashed the startup screen one more time and went dead again.
Never unlocked the bootloader or tried to flash anything.
Don't know the MIUI version, I supose it's the latest (OTA updated).
It is hard to find the right guide because all of them are old and en.miui.com links are dead .
Is it possible to save the data from the phone?
Click to expand...
Click to collapse
Hello there. I have also encountered this situation before, and turned out the battery was broken. You may try to replace the battery with a new one to see if the same failure will occur.
Black_Stark said:
Clean flash fastboot rom.
Click to expand...
Click to collapse
Thank you for the fast answer, can you provide me with a tutorial?
Do I get to save data from phone?
ivdamke said:
Hello there. I have also encountered this situation before, and turned out the battery was broken. You may try to replace the battery with a new one to see if the same failure will occur.
Click to expand...
Click to collapse
Battery life was getting worse lately, the phone wasn't reading battery levels well (empty battery would show 20% when pluged to the charger). I tried disconnecting the battery but didn't help.
Can I turn on the phone without battery?
big tuna said:
Thank you for the fast answer, can you provide me with a tutorial?
Do I get to save data from phone?
Battery life was getting worse lately, the phone wasn't reading battery levels well (empty battery would show 20% when pluged to the charger). I tried disconnecting the battery but didn't help.
Can I turn on the phone without battery?
Click to expand...
Click to collapse
I haven't tried turning on the phone without battery. I bought a new battery online for replacement, and then my phone turned on normally.
Hello everyone i have a problem, i'm trying to install custom recovery on my phone Neffos C9A and now it's bricked, someone know how unbrick it,
P.S. Phone after pluging to computer show up in device menager but after max 15 sec disconnects