Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DOESN’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
- disabled SELINUX
- Camera key don't start camera app
- TV out removed, because it is not working yet
Downloads
ROM: Download
GApps: Download (not tested. Avoid using of gapps)
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://drive.google.com/file/d/0B-2dpW_lpZCPNWtxVnRVdUVTcVE/view?usp=sharing
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" kernel: https://drive.google.com/file/d/0B-2dpW_lpZCPT0VCS0tINHU5cnc/view?usp=sharing
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Enjoy OMNI!
THANKS TO
Special thanks to Rebellos & volk204.
Also big thanks to Alberto96 for his great optimized CM11.
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox, and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
sooti & Coldwindofnowhere for 6.0 kernel and rom patches (Galaxy S I9000)
and many other who help us.
Sources:
Device: https://github.com/fire855/android_device_samsung_wave
Vendor: https://github.com/fire855/android_vendor_samsung_wave
Kernel: https://github.com/fire855/android_kernel_samsung_aries
XDA:DevDB Information
Omni 6.0.1, ROM for the Samsung Bada OS
Contributors
fire855, Volk204, Rebellos, Alberto96
Source Code: https://github.com/fire855
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2015-12-22
Last Updated 2015-12-22
Changelog
22/12/15:
- First release
Reserved
Awesome.. Thanks fire855.. Going to try..
Hi fire855..
There is an error while flashing rom...
E : Error executing updater binary in zip /sdcard/omni 6.0.1-20151222 wave-HOMEMADE.zip..
abhijeet1331 said:
Hi fire855..
There is an error while flashing rom...
E : Error executing updater binary in zip /sdcard/omni 6.0.1-20151222 wave-HOMEMADE.zip..
Click to expand...
Click to collapse
Which recovery are you using? Flash the linked files with multiloader.
Good to know people are still working on our old device
Will try it when I have time
fire855 said:
Which recovery are you using? Flash the linked files with multiloader.
Click to expand...
Click to collapse
I flashed with the linked files only.. Same error..!!
Please check..
abhijeet1331 said:
I flashed with the linked files only.. Same error..!!
Please check..
Click to expand...
Click to collapse
You executed partition.sh?
fire855 said:
You executed partition.sh?
Click to expand...
Click to collapse
yes..
abhijeet1331 said:
yes..
Click to expand...
Click to collapse
For me it's working fine. Maybe you should try to start from beginning.
fire855 said:
For me it's working fine. Maybe you should try to start from beginning.
Click to expand...
Click to collapse
Ya.. Sorry to bother you.. I flashed Bada 2.0 once again & started from beginning & successfully installed the rom..
Thanks..
abhijeet1331 said:
Ya.. Sorry to bother you.. I flashed Bada 2.0 once again & started from beginning & successfully installed the rom..
Thanks..
Click to expand...
Click to collapse
Good.
Screenshot?
thinhx2 said:
Screenshot?
Click to expand...
Click to collapse
Added.
fire855 said:
Added.
Click to expand...
Click to collapse
idont see
thinhx2 said:
idont see
Click to expand...
Click to collapse
find it in the tab called screen shot above the op
Does marshmallow manage more efficiently the ram than lollipop? The last version was supposed to be an improvement in ram and cpu usage but after reading some reviews it seems that it's not really the case.
In short, my s8500 can benefit from this rom or did we go as far as it is possible with lollipop (didn't try yet, still stuck with kitkat but hearing from aboyazan78 it works flawlessly )?
Thanks for your answer
barbe31 said:
Does marshmallow manage more efficiently the ram than lollipop? The last version was supposed to be an improvement in ram and cpu usage but after reading some reviews it seems that it's not really the case.
In short, my s8500 can benefit from this rom or did we go as far as it is possible with lollipop (didn't try yet, still stuck with kitkat but hearing from aboyazan78 it works flawlessly )?
Thanks for your answer
Click to expand...
Click to collapse
bro i did not try this rom yet .. i told u to try another rom coz its very light
but will try this rom soon and come back with my review
External SD doesn't work. It doesn't get recognized in the rom, but it does in TWRP. What file system is needed?
Related
Lineage OS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
[SIZE="2"]* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
[/SIZE]
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest official TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
KitKat is required, before you flash cm13.[/B]
Download links:
ROM: Click Here
Gapps: http://opengapps.org/
Credits :Huge thanks to @aapav01 for bringing up Cm13 fo our device @adityaupreti for new device sources and help
@SoUnd001 for front cam fix
@[email protected] and @Vladi4ik94 for testing and help
XDA:DevDB Information
CM13 for Grand 2, ROM for the Samsung Galaxy Grand 2
Contributors
Shujath
Source Code Common: https://github.com/ms013g-common
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-05-03
Created 2016-05-03
Last Updated 2016-05-03
Bug reports:[/SIZE][/B]
LineageOS 13 is in development and has several small bugs and missing translations, so in this thread we'll try to focus on device-specific bugs. Complaints/demands/bug reports without logs will be ignored.
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
Buggy Live Display
Buggy GPS but it works
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Change Log 13th May:-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Change Log 19 September:-
Rear cam fix
Added Gello browser
Security patch level updated to September
Updated theme manager with new UI
New optimizing apps view
Upstream Merge
Change Log 19 September 2nd build:-
Fixed GPS
Change Log: 02 OCtober :-
Updated Kernel Configuration
Added Z Cache
Updated Power Profile for better performance
Upsteam Merge
Change 03rd OCtober :-
Updated Kernel Configuration
Updated audio accelerator in kernel
Enabled Zcache and added Zram
Updated battery capacity to 2600mah in the power profile.
Updated Auto Brightness levels from 4 to 10
Autobrightness backlight update
Updated media profiles of the device which was outdated
Added custom power hal to increase battery life
Change 27th Jan :-
Good Bye CyanogenMod
Welcome LineageOS
Applied Front Cam fix by @SoUnd001
Removed Zcache as it was causing Offline Charge bug
No Need to flash multiple files from now, Just flash ROM and Gapps
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Shujath said:
Change Log :-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Click to expand...
Click to collapse
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Invalid response from the server: 502
can`t download :/
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Some AFH servers are down atm,wait for sometime.
praveensingh569 said:
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Click to expand...
Click to collapse
You are welcome
aapav01 said:
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Click to expand...
Click to collapse
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
[email protected] said:
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
Click to expand...
Click to collapse
You are wecome, Enmjoy the ROM
neonkat said:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Click to expand...
Click to collapse
Yup fixed now, thanks
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Yes AFH Is down
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Igor2906 said:
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Click to expand...
Click to collapse
Do a clean install
Sent from my SM-G7102 using XDA-Developers mobile app
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Hi, thanks for your update.
"Go to Settings > Display & lights and disable prevent accidental wake-up."
but i couldn't find "prevent accidental wake-up" option in settings, please help on this
Shujath said:
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
Click to expand...
Click to collapse
Aditya have remove my Commit history there nothing changed in vendor bcoz if he change anything in vendor it may break things like RIL, :good:
faizauthar12 said:
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Click to expand...
Click to collapse
I did
@Shujath after 1day of use, the Rom is very good..Thanks you very much bro.. i found only 2 issues,
- frontCam
- SDcard Name showing 'sdcard1'
grupix said:
do a clean install
sent from my sm-g7102 using xda-developers mobile app
Click to expand...
Click to collapse
\
Вас зрозумів!
igor2906 said:
\
Вас зрозумів!
Click to expand...
Click to collapse
СЛАВА УКРАЇНІ!!!
Good day. I'm really grateful for this ROM. It is nice, but i have an issue. I can't seem to access the internet on my phone, even though i can see the network. But i can access it through mobile hotspot. I don't understand why.
Code:
*** Disclamer
[COLOR="red"]I am not responsible for bricking your device![/COLOR] And, It is ONLY FOR NEXUS6.
Idea and Bug reports are welcome!!
Introduction
This rom is based on CyanogenMod 13, adding tons of extras. Modified by KangDroid & Andro_G.
Click to expand...
Click to collapse
How do I install?
You have to sure that it is for ONLY FOR NEXUS6(Shamu) and you have to install one of these recovery:CWM/TWRP/Philz/etc...
Install from OTHER ROM
* Boot in to Recovery mode
* Backup if needed.
* Wipe system/data/Cache (Factory reset is also welcome!)
* Choose ROM which I attached.
* Install with Gapps
* Boot, finish!
Install from THIS ROM(Version update)
* Boot in to Recovery mode
* Backup if needed.
* Wipe Dalvik-cache, Cache(U can do Factory reset if you want)
* Flash ROM & Gapps
* Boot, Finish!
Click to expand...
Click to collapse
Download
NOTICE: All New versions could found in:
This Page. Or check latest thread. I will update Link if there is any update.
Functions in this ROM
* Configurable Date & Clock
* Status-Bar Battery customization
* StatusBar Icon Colors
* SU Indicator
* Other StatusBar Customizations(Network Traffic, Temperature, Carrier Label..)
* Advanced QS Customizations(CM + Others)
* Task Manager on Header
* Custom Recents(Slim + Normal + Omniswitch)
* Custom Animation customization
* Advanced Navigation Bar Settings(CM + Others)
* Advanced Lockscreen Settings(CM + Others)
* Gesture Anywhere
* AppBar/App Circle Bar
* MultiWindow / Floating Window support (Experimental, Only available in Slim Recents)
* And more and more...
Credits
Code:
* CyanogenMod --> https://github.com/CyanogenMod
* Liquid Smooth --> https://github.com/LiquidSmooth
* PAC-man --> https://github.com/PAC-man
* CrDroid Android --> https://github.com/crdroidandroid
* ResurrectionRemix --> https://github.com/ResurrectionRemix
* CandyRoms --> https://github.com/CandyRoms
* Slim Roms --> https://github.com/SlimRoms
* TemaSek --> https://github.com/temasek
* arter97 --> https://github.com/arter97
* UBER --> https://github.com/UBERTC
Thanks to these People/Teams and missing people too!
XDA:DevDB Information
Hexa-Project, ROM for the Nexus 6
Contributors
Jason Hyunwoo
Source Code: https://github.com/KangDroidAOSP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-07-29
Last Updated 2016-08-18
First Release: 20160729
ChangeLog:
First Release.
Known Bugs:
Settings FC: When you trying to adjust transparency of Volume Dialog(Located in Settings --> Sounds), Settings app FC.
Volume Dialog: Line at the corner.(Settings problem, will fix soon!)
QS: Wifi tile (It is keep disabling itself when we press tile)
Bluetooth: FC(Fixed in Next version - TESTING FOR STABILITY)
Downloads:
Direct Link
FIRST! :highfive:
This force encrypt?? Want to give this a spin.
baw580 said:
This force encrypt?? Want to give this a spin.
Click to expand...
Click to collapse
Nope, I deleted force encrypt label on Ramdisk, so it shouldn't encrypt device automatically!
Cool ! New Rom , thanks for sharing !
Sent from my shamu using XDA Labs
i give it try, looks interesting, i wonder what would do if i add extra mod. Of Course i know what iam doing i THINK.
Can't wait to flash I always loved your roms Jason
yo what gapps recomend?
CM theme engine or Layers?
Sent from my Nexus 6 using Tapatalk
tattedupboy said:
CM theme engine or Layers?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Cm based, so that should answer that
chipis said:
yo what gapps recomend?
Click to expand...
Click to collapse
I use Open Gapps(Pico) I am not sure about other Gapps though
Jiggs82 said:
Can't wait to flash I always loved your roms Jason
Click to expand...
Click to collapse
Thanks for waiting for Loooong time! LTNS!
I cant get the rom to boot. It sits at the bootanimation for 10-15 min, then starts optimizing apps and goes back to the bootanimation. Tried several downloads of the rom, all the same. Using open gapps. Any idea what might be wrong?
Edit: Yes i do use the rom on a nexus 6
TMG1961 said:
I cant get the rom to boot. It sits at the bootanimation for 10-15 min, then starts optimizing apps and goes back to the bootanimation. Tried several downloads of the rom, all the same. Using open gapps. Any idea what might be wrong?
Edit: Yes i do use the rom on a nexus 6
Click to expand...
Click to collapse
I had the same problem with multiple ROMs. I was told to use open gapps pico. That has worker for me.
adr83 said:
I had the same problem with multiple ROMs. I was told to use open gapps pico. That has worker for me.
Click to expand...
Click to collapse
I use open gapps Micro..you think that the use of micro gapps instead of pico gapps may cause this? I find that strange.
Thank you for sharing with us. I am downloading now. Awesome.....
"Chance Favors the Prepared"
Does this ROM have pulse/smart bar
alphamale said:
Does this ROM have pulse/smart bar
Click to expand...
Click to collapse
I dont get it. Can u give me a ROM name that has those Functions?
TMG1961 said:
I cant get the rom to boot. It sits at the bootanimation for 10-15 min, then starts optimizing apps and goes back to the bootanimation. Tried several downloads of the rom, all the same. Using open gapps. Any idea what might be wrong?
Edit: Yes i do use the rom on a nexus 6
Click to expand...
Click to collapse
I am not sure about it, but for me, i am using OpenGapps Pico. If ur device is not booting even if u used OpenGapps, please give me a LogCat!
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of LineageOS with features that we think are useful. Hope you enjoy our builds as much as we do.
The main goal of Nuclear Team is to provide a clean and fast ROM with nice and useful features.
# Features:
• Based on LOS 14.1
• Android 7.1.1
• Nuclear Settings
• Customizable status bar
• Gestures Anywhere
• Exclusive Nuclear Boot (thanks to zuk user Xals)
• Switch To Hide SuperSu from Status Bar
• Qualcomm Assertive Display
• Network traffic indicator
• Three finger swipe to screenshot
• Show cpu info
• Dt2s everywhere on lockscreen
• All LOS goodies
AND MORE
HOW TO BUG REPORT:
-If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
× Make a nandroid backup (optional but always recommended)
× Download ROM: Here
× Download GApps: Here
× Wipe system,data,cache,dalvik
× Flash ROM
× Flash GApps
Optional: Flash SUPERSU (for root)
× Reboot
Updating:
× Flash ROM
× Reboot
Have fun....
Enjoy!
Special thanks to:
CyanogenMod
Lord Boeffla
Temasek
Ak
OrdenKrieger
ResurrectionRemix
XDA
HTCmania
Nuclear Team & testers
And a very special thanks to TugaPower
Anyone I might have forgotten (please let me know)
XDA:DevDB Information
NucleaROM, ROM for the OnePlus 2
Contributors
MZO
Source Code: https://github.com/OneRomOne-N
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OOS 3
Based On: LineageOS
Version Information
Status: Testing
Created 2017-01-24
Last Updated 2017-01-24
Reserved
This ROM follows LineageOS trees
Reserved
Screenshots of some features
reserved
raining roms for oneplus2 <3
downloading...
good to see new rom for op2 but can we have some screenshots please
New ROM, great ?
Enviado desde mi ONE A2003 mediante Tapatalk
clean flash, rom+pico gapps, bootlooping. i'm on f2fs on /data /cache
chxei said:
clean flash, rom+pico gapps, bootlooping. i'm on f2fs on /data /cache
Click to expand...
Click to collapse
Sorry this is only supported with ext4. It's working fine - screenshots uploaded
MZO said:
Sorry this is only supported with ext4. It's working fine - screenshots uploaded
Click to expand...
Click to collapse
I'm on ext4 I'm bootloop too?
12 minutes waiting ,,
Try download again...
Let me make a new build.
Can anyone shoot me a logcat with *:E
Anyone who's trying to use this ROM please use this kernel for now: it's permissive
https://www.androidfilehost.com/?fid=673368273298926110 (with first build) or wait for second build
Can you use different passwords for encryption and lockscreen?
boot loops it's been 85mins and nothing
MZO said:
Anyone who's trying to use this ROM please use this kernel for now: it's permissive
https://www.androidfilehost.com/?fid=673368273298926110 (with first build) or wait for second build
Click to expand...
Click to collapse
still nothing, but flash my own kernel , rom booting fine
It's working, you might need to reboot again after a few minutes, 5 users on Plus including me have booted it with new kernel so it works
MZO said:
It's working, you might need to reboot again after a few minutes, 5 users on Plus including me have booted it with new kernel so it works
Click to expand...
Click to collapse
yes I think :good:
nice rom
btw no root option on dev mod only root adb
NeoVsk said:
Can you use different passwords for encryption and lockscreen?
Click to expand...
Click to collapse
Never used encryption. What about the lock screen?
MZO said:
Never used encryption. What about the lock screen?
Click to expand...
Click to collapse
Usually there is same password/PIN used to decrypt the phone on startup and to unlock the screen. But some ROMs have option to use different passwords for each.
Now the build works fine tested by a few guys including me
User report:
Vamshi Prasad:
New build, everything is working
It's stable
The only bug I'm having is that there's no fast charging
But the ROM sources doesn't have much of customisation.
But the battery backup and all is very much wow.
ROM rating
Battery-10/10
Features-8/10
Stability-9/10(9 because it still lags sometimes)
Overall 9/10(it charges slowly)
Let`s emphasize that-- [highlight]THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT`S TO COME. AND SOME THINGS DOESN`T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.[/highlight]
Code:
[B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/B]
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
Maybe something else, what i forgot
SUPPORT
You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.
We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.
ROOT
Omni is without root support from default
To activate root flash zip via Recovery UPDATE-SuperSU-v2.46
Downloads
GApps: Download
You can install the update over Volk's OmniRom Android 4.4.4 KitKat.
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://yadi.sk/d/PhY11Rvnmq99T
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" https://yadi.sk/d/xWwb8r3RmpZxK
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type sh partition.sh -> press Enter"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Enjoy OMNI!
HOW TO UNINSTALL
Just reflash bada via Multiloader
CHANGELOG:
19.02.2017 https://yadi.sk/d/M3GdhKV73EGoGj
- First release
- Omni sources 19.02.2017
- Big update kernel from Coldwindofnowhere
Added CMA. Now, it is stable. This option allows you to have more available RAM as in BigMem.
Big thank's for Coldwindofnowhere and xc-racer99
THANKS TO
Special thanks to volk204 for their help to build this project and xc-racer99, sooti, Coldwindofnowhere for kernel and rom patches (Galaxy S I9000)
Thanks to Alberto96, Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox, fire855 and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL and many other who help us.
XDA:DevDB Information
[ROM][NAND|S85xx] OmniRom 4.4.4 KitKat, ROM for the Samsung Bada OS
Contributors
djkoloda, volk204
Source Code: https://github.com/AMD-Grifon
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: OmniRom
Version Information
Status: Abandoned
Created 2017-04-07
Last Updated 2020-09-06
Created a separate topic for my version of KitKat. Enjoy! :victory:
as we say "первыйнах" ))
---------- Post added at 21:00 ---------- Previous post was at 20:53 ----------
friends, donate to him
WebMoney: WMID: 360870956381
If you have a ROM from volk204 - Omni 4.4 - 26.01.2016, then just copy new zip with ROM to SD card and install in recovery mode
Feedback:
Native webbrowser : On some specific pages the phone reboots immediately. Don't know whose fault it is. Maybe I should install an other one but I don't know which one to choose.
Battery : Depend noticeably on 3g signal. If off the phone can last almost 3 days (with call, SMS only) else I must recharge every day. Sleep mode is very efficient if you move and don't need to answer incoming call.
Applications : I use only whatsapp, webbrowsing, sms, call at the moment. Everything works flawlessly except for webbrowser (see above).
Conclusion : very useable rom.
barbe31, Hi, what web page the phone is rebooted?
I'll check on my phone.
I'm sorry that was a week ago and I don't remember the particular site nor can I have access to history. (if there is a way I'd like to know).
And you didn't tell me if I can donate in a other way than WebMoney
barbe31 said:
I'm sorry that was a week ago and I don't remember the particular site nor can I have access to history. (if there is a way I'd like to know).
And you didn't tell me if I can donate in a other way than WebMoney
Click to expand...
Click to collapse
There are even more exotic method - Yandex money, but it probably will not work for you.
I advised Djkoloda to connect PayPal.
He hasn't replied yet.
Keep it up mate ... waiting for a new version
aboyazan78 said:
.. waiting for a new version
Click to expand...
Click to collapse
why do you need the new version ?
Exactly. Except for security reason, I don't understand why we would need a new version.
Union_Jack said:
why do you need the new version ?
Click to expand...
Click to collapse
For adding some new features
for example : i notice that wake up by home button is not available in this version while it was available in volk version ..
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
my wave have a silicon housing and the side power button is hard to press .. i used to wake the screen by the home ( middle ) button
aboyazan78,
try to Wake up with the left button (call)
file s5pv210-keypad.kl should be amended to read:
key 115 VOLUME_UP WAKE
key 114 VOLUME_DOWN WAKE
key 142 POWER WAKE
key 141 CALL WAKE
key 139 HOME WAKE
key 171 FOCUS WAKE
key 212 CAMERA WAKE
will pick up the phone/call dialer - left mechanical button and Wake up.
system \ usr \ keylayout \ s5pv210-keypad.KL
aboyazan78 said:
For adding some new features
for example : i notice that wake up by home button is not available in this version while it was available in volk version ..
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
my wave have a silicon housing and the side power button is hard to press .. i used to wake the screen by the home ( middle ) button
Click to expand...
Click to collapse
This was done specifically, since there were many complaints that the display was constantly turned on in the pocket.
Can you update GApps link?
bondanhootowl said:
Can you update GApps link?
Click to expand...
Click to collapse
Updated. I just forgot what other GApps I downloaded.
@djkoloda
Great ROM by great dev
Thank for keeping this device alive
Can you build CM 13 ?
instagram stories video not watch. Not work stories video.
djkoloda said:
19.02.2017 https://yadi.sk/d/M3GdhKV73EGoGj
- First release
- Omni sources 19.02.2017
- Big update kernel from Coldwindofnowhere
Added CMA. Now, it is stable. This option allows you to have more available RAM as in BigMem.
Big thank's for Coldwindofnowhere and xc-racer99
Click to expand...
Click to collapse
Many thanks for keeping this alive... Just flashed successfully from omni-4.4.4-20141211 without any hassle.
fluffi444 said:
Many thanks for keeping this alive... Just flashed successfully from omni-4.4.4-20141211 without any hassle.
Click to expand...
Click to collapse
Unfortunately, there will be no new versions, but the most important thing I've achieved is CMA. All firmware will be maintained until the last.
[ROM][WIP] Ubuntu Touch for the Motorola G4 Play [harpia]
Code:
*** Disclaimer
/*
* I'm not responsible for bricked devices, dead SD cards, etc...
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Introduction
Hello everyone! Today I'm here to share with you a port of Ubuntu Touch for our device the harpia, This post is aimed to developers and experienced users only.
Click to expand...
Click to collapse
Requirements
-- A Moto G4 Play
-- Any pc/lap/etc with a linux os (Ubuntu,Arch,Debian,Mint,etc.)
* -- ADB and Fastboot (Just in case you want to use the second method)
* -- Custom Recovery (I recommend TWRP)
Click to expand...
Click to collapse
Installation instructions - Easy
-- Download the zip file from the downloads (obviously)
-- Reboot to TWRP
-- Format /data, /system and /cache as ext4
-- Flash the downloaded zip
-- Reboot
Click to expand...
Click to collapse
Installation instructions - Not So Easy
-- Download the halium-boot.img and the system.img from the downloads
-- Download the rootfs from here
-- Download this tool
-- Reboot to TWRP
-- Format /data, /system and /cache as ext4
-- CD to the tool dir
-- Run ./halium-install -p ut <path to rootfs> <path to system.img>
-- Reboot
Click to expand...
Click to collapse
Download
-- Flashable zip
-- System.img
-- Hybris-boot.img
Click to expand...
Click to collapse
What's working/not
Code:
Working:
-- It boots (LOL)
Not Working:
-- Graphics
-- SSH
-- ????
Changelog
Code:
Current changelog: -- 9/11/18
[note] -- still no graphics nor ssh (at least in my pc/phone)
[fixed] -- console bug, that led into halium-debug mode - [URL="https://github.com/HaliumForMSM8916/android_device_motorola_msm8916-common/commit/3070dc47fc7792137561d5da4f8f2732a815c189"]3070dc47fc7792137561d5da4f8f2732a815c189[/URL]
Older changelogs:
Code:
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Ubports community/[URL="https://ubports.com/"]project[/URL] for keeping UT alive
* Halium community/[URL="https://halium.org/"]project[/URL] for all the hard work of getting Linux on android
* [URL="https://forum.xda-developers.com/member.php?u=5817781"]Facuarmo[/URL] for helping/teaching me
* [URL="https://forum.xda-developers.com/member.php?u=4406447"]Impreza233[/URL] for his work on ut for the surnia
* Everyone else on the [URL="https://t.me/somefeak"]@SomeFeaK[/URL] TGroup
* And whoever I forgot to mention
XDA:DevDB Information
UbuntuTouch (Ubports), ROM for the Moto G4 Play
Contributors
IkerST
Source Code: https://github.com/HaliumForMSM8916
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Halium
Version Information
Status: Testing
Created 2018-11-10
Last Updated 2018-11-20
Click to expand...
Click to collapse
What is the list of things that work/don't work with this ROM right now, or is it the standard list that UB ports has for any given phone? You mention in the change log that there are no graphics and no ssh. From that it sounds like nothing is working yet. If I have misunderstood what you meant there, LMK. Awesome that you are trying something like this. I have wanted to check out UB ports on a device, but I never had one that had a rom for it.
reubenbrown13 said:
What is the list of things that work/don't work with this ROM right now, or is it the standard list that UB ports has for any given phone? You mention in the change log that there are no graphics and no ssh. From that it sounds like nothing is working yet. If I have misunderstood what you meant there, LMK. Awesome that you are trying something like this. I have wanted to check out UB ports on a device, but I never had one that had a rom for it.
Click to expand...
Click to collapse
I don't know actually what does work and what doesn't (except for the graphics), because I can't access to the phone to run some tests
why UT? I've actually never ran a stable port... I ought to, but what is so great about UT compared to Sailfish OS or even Plasma Mobile?
Galaxyninja66 said:
why UT? I've actually never ran a stable port... I ought to, but what is so great about UT compared to Sailfish OS or even Plasma Mobile?
Click to expand...
Click to collapse
UT vs Plasma Mobile: UT is more documented and there is a bigger community supporting it, and both use a similar halium base
So I may get a build in the next days for Plasma Mobile
And regarding to Sailfish OS, since halium uses a similar system/logic I will search and maybe try to also port it .
IkerST said:
UT vs Plasma Mobile: UT is more documented and there is a bigger community supporting it, and both use a similar halium base
So I may get a build in the next days for Plasma Mobile
And regarding to Sailfish OS, since halium uses a similar system/logic I will search and maybe try to also port it .
Click to expand...
Click to collapse
There is already a private build of Sailfish OS 2.x for Harpia, and it's reportedly VERY stable but the camera is broken. I think mal on the sailfishos-porters IRC did it, and if he couldn't get the camera to work... good luck with that.
OT removed...
I'm making some builds, are WIP, and just for testing, will be notified here: https://t.me/haliumharpia on telegram and uploaded in GitHub https://github.com/HaliumForMSM8916/jenkins_build on the releases
I tried to flash the zips of ubport, but I get error 2 from twrp. Any ideas why?