Let`s emphasize that-- [highlight]THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT`S TO COME. AND SOME THINGS DOESN`T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.[/highlight]
Code:
[B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/B]
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
Maybe something else, what i forgot
SUPPORT
You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.
We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.
ROOT
Omni is without root support from default
To activate root flash zip via Recovery UPDATE-SuperSU-v2.46
Downloads
GApps: Download
You can install the update over Volk's OmniRom Android 4.4.4 KitKat.
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://yadi.sk/d/PhY11Rvnmq99T
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" https://yadi.sk/d/xWwb8r3RmpZxK
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type sh partition.sh -> press Enter"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Enjoy OMNI!
HOW TO UNINSTALL
Just reflash bada via Multiloader
CHANGELOG:
19.02.2017 https://yadi.sk/d/M3GdhKV73EGoGj
- First release
- Omni sources 19.02.2017
- Big update kernel from Coldwindofnowhere
Added CMA. Now, it is stable. This option allows you to have more available RAM as in BigMem.
Big thank's for Coldwindofnowhere and xc-racer99
THANKS TO
Special thanks to volk204 for their help to build this project and xc-racer99, sooti, Coldwindofnowhere for kernel and rom patches (Galaxy S I9000)
Thanks to Alberto96, Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox, fire855 and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL and many other who help us.
XDA:DevDB Information
[ROM][NAND|S85xx] OmniRom 4.4.4 KitKat, ROM for the Samsung Bada OS
Contributors
djkoloda, volk204
Source Code: https://github.com/AMD-Grifon
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: OmniRom
Version Information
Status: Abandoned
Created 2017-04-07
Last Updated 2020-09-06
Created a separate topic for my version of KitKat. Enjoy! :victory:
as we say "первыйнах" ))
---------- Post added at 21:00 ---------- Previous post was at 20:53 ----------
friends, donate to him
WebMoney: WMID: 360870956381
If you have a ROM from volk204 - Omni 4.4 - 26.01.2016, then just copy new zip with ROM to SD card and install in recovery mode
Feedback:
Native webbrowser : On some specific pages the phone reboots immediately. Don't know whose fault it is. Maybe I should install an other one but I don't know which one to choose.
Battery : Depend noticeably on 3g signal. If off the phone can last almost 3 days (with call, SMS only) else I must recharge every day. Sleep mode is very efficient if you move and don't need to answer incoming call.
Applications : I use only whatsapp, webbrowsing, sms, call at the moment. Everything works flawlessly except for webbrowser (see above).
Conclusion : very useable rom.
barbe31, Hi, what web page the phone is rebooted?
I'll check on my phone.
I'm sorry that was a week ago and I don't remember the particular site nor can I have access to history. (if there is a way I'd like to know).
And you didn't tell me if I can donate in a other way than WebMoney
barbe31 said:
I'm sorry that was a week ago and I don't remember the particular site nor can I have access to history. (if there is a way I'd like to know).
And you didn't tell me if I can donate in a other way than WebMoney
Click to expand...
Click to collapse
There are even more exotic method - Yandex money, but it probably will not work for you.
I advised Djkoloda to connect PayPal.
He hasn't replied yet.
Keep it up mate ... waiting for a new version
aboyazan78 said:
.. waiting for a new version
Click to expand...
Click to collapse
why do you need the new version ?
Exactly. Except for security reason, I don't understand why we would need a new version.
Union_Jack said:
why do you need the new version ?
Click to expand...
Click to collapse
For adding some new features
for example : i notice that wake up by home button is not available in this version while it was available in volk version ..
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
my wave have a silicon housing and the side power button is hard to press .. i used to wake the screen by the home ( middle ) button
aboyazan78,
try to Wake up with the left button (call)
file s5pv210-keypad.kl should be amended to read:
key 115 VOLUME_UP WAKE
key 114 VOLUME_DOWN WAKE
key 142 POWER WAKE
key 141 CALL WAKE
key 139 HOME WAKE
key 171 FOCUS WAKE
key 212 CAMERA WAKE
will pick up the phone/call dialer - left mechanical button and Wake up.
system \ usr \ keylayout \ s5pv210-keypad.KL
aboyazan78 said:
For adding some new features
for example : i notice that wake up by home button is not available in this version while it was available in volk version ..
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
my wave have a silicon housing and the side power button is hard to press .. i used to wake the screen by the home ( middle ) button
Click to expand...
Click to collapse
This was done specifically, since there were many complaints that the display was constantly turned on in the pocket.
Can you update GApps link?
bondanhootowl said:
Can you update GApps link?
Click to expand...
Click to collapse
Updated. I just forgot what other GApps I downloaded.
@djkoloda
Great ROM by great dev
Thank for keeping this device alive
Can you build CM 13 ?
instagram stories video not watch. Not work stories video.
djkoloda said:
19.02.2017 https://yadi.sk/d/M3GdhKV73EGoGj
- First release
- Omni sources 19.02.2017
- Big update kernel from Coldwindofnowhere
Added CMA. Now, it is stable. This option allows you to have more available RAM as in BigMem.
Big thank's for Coldwindofnowhere and xc-racer99
Click to expand...
Click to collapse
Many thanks for keeping this alive... Just flashed successfully from omni-4.4.4-20141211 without any hassle.
fluffi444 said:
Many thanks for keeping this alive... Just flashed successfully from omni-4.4.4-20141211 without any hassle.
Click to expand...
Click to collapse
Unfortunately, there will be no new versions, but the most important thing I've achieved is CMA. All firmware will be maintained until the last.
Related
[kernel][sense][Apr-27-2013] tbalden's kernel v3.6 [CIFS] + [HOME2WAKE][HTClogoMenu][HTCLogo2Wake/Sleep][OTG]
NEWS: Teamed up with n3ocort3x, as TeaMSeven. Development of this kernel continues in this thread: http://forum.xda-developers.com/showthread.php?t=2255160 . Check out second post for the STABLE edition (no OC/UV/gcc), and first post for PERFORMANCE edition (OC/UV/linaro)
- Compiled from HTCDev source
- Fixed audio routing issue with voice calls [phone's earpiece amplification fixed, htc left out a good chop from its released kernel sources]
- Adds support for more USB OTG devices than official HTC kernel - (pls test if you think your DSLR/ps3 controller etc and report - only works if your phone's charged above 30%!)
- Added CIFS (windows share filesystem mount support, use CIFS manager)
- Added NTFS (read/write) support
- All in one installer - script by @he_stheone64 (thanks !)
- Added init.d support (thanks @torxx !)
- Based on latest kernel source: 1.29.1540.3 Developer Edition
http://dl4.htc.com/RomCode/Source_and_Binaries/m7ul-jb-crc-3.4.10-42e6c45.zip
- Tested on 1.28.401.7 (please report your Build number if differs), international One (m7, from UK)
====================================================
VARIANTS:
HOME2Wake and HTCLogo2Sleep:
- What is HOME2Wake -> It's a bit similar to Sweep2Wake, but instead of swiping through the capacitive buttons, you have to push the Home button instead, to wake the device from sleep. Then press HTC logo to switch screen off. At times it takes 2 consecutive presses when the phone is in deepsleep. Still testing this stuff.
Video:
HOME2Wake and HTCLogoMenu
HOME -> wakes phone
HTC Logo -> Menu button mapping
HTCLogo long tap -> screen off
Known issues:
- None
- Aroma installer sometimes exits in the setup process, try again till success
KNOWN TO WORK ON:
- 1.28 International edition based ROMs, and 1.29 (1.29.1540.3) developer edition based ROMs, updates up to 1.29.401.5, 1.29.xxx.13
!Doesnt work on Sprint HTC One variant, as it's CDMA, not GSM!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarms on your phone failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOAD
3.6 All-In-One installer zip (flash from recovery) - kernel and modules and keylayout and working camera firmware, Aroma based (thx @torxx for aroma script):
tbaldens-sense-kernel-v3.5-full_installer.zip: http://d-h.st/uSB
Use CWM or another AROMA compatible recovery. You can select all stuff from Menus, no need for additional flashing. If you get stuck, or exits to Recovery menu, try again. Should work! (Aroma is sometimes a bit flaky, but it works, preferably press Next buttons in installer a bit slower, that way it's more stable)
Changelogs in second post
Older versions:
tbaldens-sense-kernel-v3.5-full_installer.zip: http://d-h.st/WQy
tbaldens-sense-kernel-v3.4-full_installer.zip: [COLOR="Red"]http://d-h.st/FHA[/COLOR]
Configuration variants, additional flashables (using init.d): http://forum.xda-developers.com/showpost.php?p=40672557&postcount=211
tbaldens-sense-kernel-v3.2-full_installer.zip: http://d-h.st/3FV
tbaldens-sense-kernel-v3-full_installer.zip: http://d-h.st/S35
Unified boot.img with switches (2.0): http://forum.xda-developers.com/showpost.php?p=40631815&postcount=133
Camera Flashable fix for v3.0 + ROM versions 1.29.xxx.12 and 1.29.xxx.13 here: http://forum.xda-developers.com/attachment.php?attachmentid=1908030&d=1366810966[/b] - you NEED this flashed from recovery, if you're on a rom based on those versions, so camera will work
http://d-h.st/SIE - Base version 1.0 (not with HOME2Wake)
http://d-h.st/4ZM - HOME2Wake & HTCLogo2Sleep version 1.1, test version, might need two taps when it deepsleeps, Push HTC logo for screen off
http://d-h.st/JkK - HOME2Wake & HTCLogoMenu version 1.1 (if you want HTC Logo as Menu button)
modules installer 1.1 (flashable from recovery), only for 2.0 version and below, for Wifi and kernel modules + HTCLogoMenu button, not needed for 3.0+ http://d-h.st/7Iq
INSTALLATION
0. go into Recovery
0.1 DO A NANDROID backup if you didnt already -- if anything goes cheesy, restore your backup
1. flash All-In-One installer zip (aroma menus will ask for options)
2. reboot
CONFIGURATION OF HOME2WAKE/HTCLogo behavior
You can select the Variant you want in the Aroma installer, and also select a mod to Disable on-screen three-dot menu button (useful if you use HTCLogo2Menu configuration)
Possible variants you can select in installer (recovery):
- Stock (no wake, no menu, no sleep button)
- Home2Wake + HTCLogo2Menu and long tap HTCLogo2Sleep
- Home2Wake + HTCLogo2Sleep with long tap
- Home2Wake + HTCLogo2Sleep with short tap
- HTCLogo2Menu
- Home2Wake
- HTCLogo2Wake + HTCLogo2Sleep with long tap
- HTCLogo2Wake + HTCLogo2Sleep with short tap
- HTCLogo2Wake + HTCLogo2Menu and long tap HTCLogo2Sleep
SOURCE
https://github.com/TeaMSeven/android_kernel_htc_m7-sense
ABOUT THE DEVELOPMENT OF THIS KERNEL
This is a feature oriented kernel development thread, not performance oriented.
This kernel will stay free of Overclock/Underclock/Overvolt/Undervolt patches on purpose.
I'll keep that part in line with HTC's original kernel and intention so as to remain rock stable on the long run.
What HTC did I consider well tested and best for everyday operation, but adding usability features (like wake/button and such stuff I've introduced) I'm very much interested in. So that's the part where this kernel comes into picutre, very stable with additional usability features.
Additional resources
Cifs manager: https://play.google.com/store/apps/details?id=ws.plattner.cifsmanager&hl=en
Changelog, history:
Version 3.6 - April-27-2013
- Added long press HTCLogo sleep for HTCLogo2sleep modes too (Home2Wake/HTCLogo2Sleep and HTCLogo2wake/Sleep modes)
- For HTCLogo2sleep modes added a Long tap and Short tap variant. Long tap variants will need a long tap on HTCLogo for sleep.
- For HTCLogo2Wake (when screen is off), the size of the Logo area to tap for wake is slightly increased for easier wake (not increased when screen is on, to not interfere with keyboard)
- Added a short time counter for HTCLogo2Wake too, to avoid accidental wakes: you will need to press the logo button slightly longer to wake the device.
(when device deepsleeps, you will need two slightly longer Logo button press to wake device!)
Version 3.5 - April-27-2013
- Added long press HTCLogo button for sleep (works only if you enabled a HTCLogo
function [logo2sleep or logo2menu])
- Added a short time counter for Home2Wake to avoid accidental wakes, you
will need to press the Home button slightly longer to wake the device.
(when device deepsleeps, you will need two slightly longer Home button press
to wake device!)
- Added possible msm_hsci_host wakelock fix from CAF for test purpose.
Tested, works fine, not sure if it gives or takes away, but
deepsleep works fine with it.
Version 3.4 - April-27-2013
- Moving to Aroma installer, thanks to @torxx
- Logo2Wake options added to possibilities (Logo2Wake+Logo2Sleep and Logo2Wake+Logo2Menu)
Version 3.3 - April-26-2013
- Haptic feedback for HTCLogo2Menu button feature added (thanks @codeworkx for the right solution) - will switch off if you switch off Haptic feedback in Power save mode
- Haptic feedback added for Home2Wake/HTCLogo2Sleep button functionality
- possibly resolves OTG device incompatibility issues for DSLR adn PS3Controller and alike, please test and report back[/B]
Version 3.2 - April-25-2013
- Wider HTC-Logo button area for more convenient handling
- Incorporated matching Camera firmware (thanks @he_stheone64)
Version 3.1 - April-25-2013
- Camera firmware fix for 1.29.xxx.12 and .13 based roms added to downloads. Thanks to @he_stheone64 , @Nushi for creating the fix.
Version 3.0 - April-24-2013
- All-In-One installer (kernel + modules + keylayout), (thanks @he_stheone64 for the awesome flasher script)
- Still unified version with sysfs configuration for variants
- NTFS read/write support added
- init.d support added (thanks @torxx)
Version 2.0 - April-24-2013
- Unified version with sysfs configuration for variants
- Write MMC for system partition enabled
- Some fixes in Logo2Menu functionality
Version 1.2 for HTCLogoMenu new variant - April 23 2013
- HTCLogoMenu feature added to a new variant
Version 1.1 for H2w - April-22-2013
- H2W updated: HTC logo 2 sleep added. Check video in first post.
Version 1 - April-21-2013
- initial release
- based on 1.29.1540.3 Developer Edition
- fixed earpiece audio routing issue
- adding CIFS support with
- fixed CIFS mounting issue
So this will work an art device and the ear piece issue (not working) in other kernels, that's fixed?
Sent from my HTC One
frodriguez96 said:
So this will work an art device and the ear piece issue (not working) in other kernels, that's fixed?
Sent from my HTC One
Click to expand...
Click to collapse
i test it on my HTC One (m7), and not on AT&T or Developer edition. So please report back if it works.
And yes, earpiece issue is fixed.
Nice to see New kernel developer here ....please sir hopefully you can add call recorder ....welcome sir to HTC one dev
Do I need to flash the boot.IMG with fastboot and the modules in recovery or just one.
Sent from my HTC One
frodriguez96 said:
Do I need to flash the boot.IMG with fastboot and the modules in recovery or just one.
Sent from my HTC One
Click to expand...
Click to collapse
fastboot flash boot boot.img -- then from recovery modules! will add to first post.
Great Job from a great Guy ! Thanks TB ! Its really good to have u here !
Brilliant: LINK Hats off
Alright sweet. Will report back once I can get a hold of a computer.
Sent from my HTC One
n3ocort3x said:
Great Job from a great Guy ! Thanks TB ! Its really good to have u here !
Click to expand...
Click to collapse
thanks mate, we'll rock this device, n3o
nice patch. keep up the good work. thx
n3ocort3x said:
Great Job from a great Guy ! Thanks TB ! Its really good to have u here !
Brilliant: LINK Hats off
Click to expand...
Click to collapse
tbalden said:
thanks mate, we'll rock this device, n3o
Click to expand...
Click to collapse
Can't wait to get mine. Great to have you guys here. Now this ONE looks promising.
so can I flash the boot.img using flash image gui app or this can only be done on fastboot?
Earpiece sound confirmed working. Excellent work and many thanks!
c-prodigo said:
so can I flash the boot.img using flash image gui app or this can only be done on fastboot?
Click to expand...
Click to collapse
I think you can. Haven't tried that app
Sent from my HTC One using Tapatalk 2
well this app came installed on the viper rom htc one x and I already used it to flash recovery igm from clockworkmod...
---------- Post added at 02:13 PM ---------- Previous post was at 02:13 PM ----------
also works for flashing kernels but haven tryied it yet in the htc one
---------- Post added at 02:15 PM ---------- Previous post was at 02:13 PM ----------
this kernel is supposed to work on all custome roms right just to make sure..
Wow nice work.
Could you add following:
Voltage support
CPU freq change support
Wake up with volume keys
Reynt said:
Wow nice work.
Could you add following:
Voltage support
CPU freq change support
Wake up with volume keys
Click to expand...
Click to collapse
im sure goodies will be coming lol
c-prodigo said:
well this app came installed on the viper rom htc one x and I already used it to flash recovery igm from clockworkmod...
---------- Post added at 02:13 PM ---------- Previous post was at 02:13 PM ----------
also works for flashing kernels but haven tryied it yet in the htc one
---------- Post added at 02:15 PM ---------- Previous post was at 02:13 PM ----------
this kernel is supposed to work on all custome roms right just to make sure..
Click to expand...
Click to collapse
It uses stock ramdisk . So if that's fine with the custom Rom it should work imho. I'm on stock .pls report back
Sent from my HTC One using Tapatalk 2
Haha, I'm sure, too. Well, I'm glad the biggest step was done now: Fixing Sound Problem.
Unofficial CyanogenMod 12.1 for Samsung Galaxy Tab 3 10.1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, ...
* You flash this at your own risks
*/
About CM
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information
You need a recent TWRP version to flash this ROM.
Installation
First time installing or coming from another ROM
Copy ROM to SDCard
Copy Houdini to SDCard
Copy GApps to SDCard
Boot into recovery
Backup EFS partition
Wipe -> Advanced Wipe -> Dalvik Cache + System + Cache + Data
Install ROM
Install Houdini
Install GApps
Reboot
First start takes a long time
Upgrading from earlier version of CyanogenMod 12.1
Copy ROM to SDCard
Boot into recovery
Install ROM
Reboot
[OPTIONAL] Converting filesystem to F2FS (thanks @michiil)
The ROM has F2FS support. You may want to use it instead of the default (EXT4).
This will delete ALL files/data from your tab.
What you will need: A working PC and a working USB cable.
Install the most recent Recovery
Download the most recent Recovery from the second post. Flash the zip file in recovery. Back in the main menu press Reboot > Recovery
Format Data and Cache to F2FS
Wipe > choose Cache > repair or change file system > change file system > F2FS > Swipe to Confirm
Go back and repeat the same steps with Data. I got some error messages when formatting Data but they don't seem to be a problem.
Back in the main menu press Reboot > Recovery
Install Rom + Houdini + Gapps
Connect your tab to your PC and copy the zip files on the tab.
Flash the files, reboot and enjoy :good:
How to get back to EXT4
You will again loose all files/data on the tab.
Just repeat Step 2 but use EXT4 instead of F2FS.
What's working
RIL for P5200 (data, SMS/MMS, calls)
GPS
2D/3D acceleration
HW video encoding/decoding
Screen cast (miracast)
Sound
InfraRed
Camera
Wifi
Bluetooth
Sensors (and automatic brightness)
Smart cover lock/unlock
Multiuser
SDCard, USB OTG
Tethering (USB, Bluetooth, Wifi)
F2FS and exFAT
What's not working
Chromecast
RIL (for P5220)
MHL
Secure videos/DRM (Widevine, Google Play Movies...)
HW audio decoding
SELinux (disabled)
You tell me
How to root
Go to 'Settings/About tablet'
Tap 7 times on 'Build number'
Go back
Go to 'Developer options'
Tap on 'Root access'
Select 'Apps only' ('Apps and ADB' if you plan to use it in adb shell)
How to help
When something is not working correctly, in addition to common informations, I may ask you to provide logs. There are different kind of logs and it's not always easy to get all of them. For this, you can use SysLog (available on F-Droid or Google Play.
There is currently a bug in the app. Download it from AndroidFileHost. Use this patch if you want to compile it yourself:
Code:
diff --git a/app/src/main/java/com/tortel/syslog/utils/Utils.java b/app/src/main/java/com/tortel/syslog/utils/Utils.java
index 40d41b8..80ae55c 100644
--- a/app/src/main/java/com/tortel/syslog/utils/Utils.java
+++ b/app/src/main/java/com/tortel/syslog/utils/Utils.java
@@ -144,7 +144,7 @@ public class Utils {
Log.v(TAG, "Path: "+path);
//Make the directory
- if(!outPath.mkdirs() && !outPath.isDirectory()){
+ if(!outPath.mkdirs() || !outPath.isDirectory()){
throw new CreateFolderException();
}
Make sure to root device before using this app.
To get the logs:
Start SysLog
Click on 'TAKE LOG'
Once log is taken, SysLog will try to share the resulting file, just cancel
Send me the file /sdcard/SysLog/[YYYY-MM-DD_HH.mm]/[YYYY-MM-DD_HH.mm].zip
If you left 'Scrub potentially personal information from the logs' checked, you should be safe.
ROM sources
Kernel
https://github.com/nels83/android_kernel_samsung_santos10/tree/cm-12.1
Device trees
https://github.com/nels83/android_device_samsung_p5200/tree/cm-12.1
https://github.com/nels83/android_device_samsung_p5210/tree/cm-12.1
https://github.com/nels83/android_device_samsung_p5220/tree/cm-12.1
Local manifest
https://github.com/nels83/android_device_samsung_p5200/wiki/Local-manifest
CM12.1 Patches (if you just need these)
https://gist.github.com/nels83/bbec9f80478fcb679412
Credits
Angel_666 , moonbutt74 and Restl3ss for starting the work on this device
Android-Andi for his device tree
Deltadroid for his GApps package
All testers of the "signup" thread
CyanogenMod and Google for Android
XDA
AndroidFileHost
XDA:DevDB Information
CyanogenMod 12.1 for GT-P52XX, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
nels83
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-05-05
Last Updated 2016-05-29
Downloads
ROM
ROM - Beta 4 (20160529)
Galaxy Tab 3 10.1 3G : GT-P5200 (MD5)
Galaxy Tab 3 10.1 Wifi : GT-P5210 (MD5)
Galaxy Tab 3 10.1 LTE : GT-P5220 (MD5)
You can find old versions on AndroidFileHost. Version code is in file description.
Houdini (20150521)
Houdini for Android 5.0 (MD5)
GApps
See Open Gapps, select Platform x86 and Android 5.1.
TWRP
See TWRP thread.
Other
Flash player (11.1.112.60)
Flash player for x86
Note
There is currently a bug with HW video decoding/encoding: you can't have both. By default, the ROM provides HW video encoding but partial HW video decoding.
If you want full HW video decoding, you can flash hw_decode.zip (you will however loose HW video encoding). Fixed in alpha 11.
A bug appeared in Alpha 13 causing voice calls (in P5200) to be muted. It will be fixed in Beta 2. In the meantime, you can flash audio_test3.zip after flashing the ROM. Fixed in beta 2.
Changes
Changelog
Beta 4 (20160529)
- CM update
Old changes
Beta 3 (20160210)
- CM update
- Fixed GPS
- Updated F2FS driver
Beta 2 (20151120)
- CM update (stable/cm-12.1-YOG7D)
- Fixed audio calls
- Speaker by default for audio calls
- Fixed video artifacts
Beta 1 (20151027)
- CM update
- Better hardware buttons responsiveness
- Enabled wifi hotspot for GT-P5210
Alpha 15 (20151012)
- CM update
- Button lights are activated only when touching them (thanks to pawitp)
- Reduced boot time (first one and when using encryption)
Alpha 14 (20150922)
- CM update
- Fixed device encryption
- Added HW keystore
- Disabled CABC
- Added stock extSdCard symlink (thanks @HassoNas)
- Reduced boot time by launching MDS service (thanks to Tran Huu Tin)
Alpha 13 (20150902)
- Based on CM 12.1 YOG4 stable branch
- Fixed sensors
- Optimized zram
- Added KeyDisabler
- Added CABC
Alpha 12 (20150806)
- CM Sync
- Fixed voice calls for P5200
- Fixed GPS for P5200/P5220 (still partial support)
- Fixed permissions for interactive governor
- Used proper OmniROM patch for cursor
- Added deadline I/O scheduler
- Reverted to CFQ I/O scheduler by default
- Disabled KSM
Alpha 11 (20150728)
- CM Sync
- Fixed video encoding
- Fixed audio bugs appearing in some games
- Added FIOPS I/O scheduler (enabled by default)
Alpha 10 (20150711)
- CM Sync (Android 5.1.1_r6)
- Fixed USB OTG settings
- Added performance profiles
- Fixed more green bar on some videos
- Fixed reversed volume button
- Reverted power hal
Alpha 9 (20150615)
- CM Sync
- Added Stk and SamsungServiceMode
- Fixed pinch zoom (by CM)
- Set lz4 compression for zram
- Set lzma compression for kernel
- Cleanups / merges
Alpha 8 (20150605)
- CM Sync
- Fixed third party VPN
- Added smart cover support
- Various fixes
Alpha 7 (20150601)
- CM Sync
- Enabled KSM (for real, missed a commit in alpha 6)
- Fixed audio glitches
- Fixed green bar on some videos
- Added F2FS support (needs TWRP 2.8.6.0 V2)
Alpha 6 (20150528)
- CM Sync (Android 5.1.1_r3)
- Enabled KSM and zram
- Forced menu icon (in Firefox for example)
- Fixed home button for secondary users
Alpha 5 (20150520)
- CM Sync
- Fixed screen recording
- Use opensource mixvbp
Alpha 4 (20150517)
- CM Sync
- Adjusted power profile (needs testing)
- Fixed HW video encoding (only from camera, screen recording not working)
- Fixed Wifi direct
- Various config fixes
Alpha 3 (20150510)
- CM Sync
- Fixed wifi tethering
- Fixed mouse cursor
- Fixed show touches in developer options
Alpha 2 (20150508)
- Add P5220 ROM
- Fixed bluetooth PIN and tethering
- Add extra fonts
- H icon for HSPA
- Enable Wifi-Direct for all devices
Alpha 1 (20150505)
- Fixed camera for P5200
- Fixed minimum brightness
- Fixed hardware keys definitions
- Enabled reboot to download
nels83 said:
Changelog
Alpha 1
- Fixed camera for P5200 (hopefully)
- Fixed minimum brightness
- Fixed hardware keys definitions
- Enabled reboot to download
Click to expand...
Click to collapse
Hi! Glad to see a new thread by you!
Just some Thoughts - in "/common-overlay/frameworks/base/core/res/res/xml/power_profile.xml"
Code:
<item name="battery.capacity">2100</item>
maybe 4000?
and
<array name="cpu.speeds">
max value for us is 16000000 and min value is 800000 i think like this:
<array name="cpu.speeds">
<value>800000</value>
<value>933000</value>
<value>1200000</value>
<value>1333000</value>
<value>1600000</value>
</array>
And for Intel platform we need 2 more files: thermal_throttle_config.xml
thermal_sensor_config.xml but i dunno how correctly it will be used by CM frameworks...
P.S. for open\close reaction on case we can try add <bool name="config_lidControlsSleep">true</bool>
Just flashed Alpha1 built for P5200 and camera works now
thx nels83
New bugs:
-otg mouse works, but no cursor
-screencasting not working(my device chromecast)
-show touches in developer options not working
-when I change language, settings crash
---------- Post added at 03:27 PM ---------- Previous post was at 03:03 PM ----------
blits01 said:
New bugs:
-otg mouse works, but no cursor
-screencasting not working(my device chromecast)
-show touches in developer options not working
-when I change language, settings crash
Click to expand...
Click to collapse
+wifi hotspot not working
Is there a way to make the button lights only light up when you touch them and not light up every time you touch the screen?
Sent from my Nexus 5
blits01 said:
New bugs:
-otg mouse works, but no cursor
-screencasting not working(my device chromecast)
-show touches in developer options not working
-when I change language, settings crash
---------- Post added at 03:27 PM ---------- Previous post was at 03:03 PM ----------
+wifi hotspot not working
Click to expand...
Click to collapse
Not working Dialer(do not call)
KingUsman said:
Is there a way to make the button lights only light up when you touch them and not light up every time you touch the screen?
Sent from my Nexus 5
Click to expand...
Click to collapse
+1
Angel_666 said:
Hi! Glad to see a new thread by you!
Just some Thoughts - in "/common-overlay/frameworks/base/core/res/res/xml/power_profile.xml" ...
Click to expand...
Click to collapse
Thanks! Good catch, I never edited this file, just took the one from stock ROM...
Angel_666 said:
And for Intel platform we need 2 more files: thermal_throttle_config.xml
thermal_sensor_config.xml but i dunno how correctly it will be used by CM frameworks...
Click to expand...
Click to collapse
I'll take a look. Thermal management is on my todo list.
Angel_666 said:
P.S. for open\close reaction on case we can try add <bool name="config_lidControlsSleep">true</bool>
Click to expand...
Click to collapse
It won't work, these devices don't have lid
KingUsman said:
Is there a way to make the button lights only light up when you touch them and not light up every time you touch the screen?
Click to expand...
Click to collapse
I don't think so. This would require CyanogenMod changes (if it is even possible).
Thank you for this great ROM.
Is it possible to make the magnetic Sensors work? If i open or close my Bookcover the Display doesn't turn on or off.
blits01 said:
New bugs:
-screencasting not working(my device chromecast)
-otg mouse works, but no cursor
-show touches in developer options not working
Click to expand...
Click to collapse
Thanks for the reports, I'll check this.
blits01 said:
-when I change language, settings crash
Click to expand...
Click to collapse
It seems we are not alone: https://code.google.com/p/android/issues/detail?id=166828 and http://forum.xda-developers.com/showpost.php?p=59934854&postcount=5133
I noticed some bugs concerning fonts, it may be related.
blits01 said:
+wifi hotspot not working
Not working Dialer(do not call)
Click to expand...
Click to collapse
These two are hard to try for me as I don't have a P5200 device (but I will investigate). Maybe @Angel_666 could take a look ?
Holzi001 said:
Thank you for this great ROM.
Is it possible to make the magnetic Sensors work? If i open or close my Bookcover the Display doesn't turn on or off.
Click to expand...
Click to collapse
This function is not included in CyanogenMod (afaik). You can try to calibrate the magnetic sensor and install Magnetic Lock from the Play Store.
Flashed this afternoon and I am loving it so far. Can really tell it's been liberated from TW as performance is vastly superior. Haven't really encountered new bugs or anything. Did try to mess with the magnetic lock apps but with zero success. Is it even possible to bake functionality like this into CM?
Thank you so much for putting this together!! Has breathed a lot of new life into this aging device.
I had honestly given up on the tab 3 10.1 haha (as is obvious by lack of pimpdroid updates), I was about a day away from selling it. Good work my friend
Its really awsome to see something new here i will flash it as soon as i get home.
If you need someone to do some testing just ask me since i have a 5200.
EDIT: goddamn thats smooth. its like a whole new tablet
Thrilled
This is just amazing! I've been looking in the development thread almost every day this year. From the start of April it's been less often and I almost most hope.
So imagine my surprise and joy! It's like a brand newer tablet! Thanks :laugh::good:
nels83 said:
Thanks for the reports, I'll check this.
It seems we are not alone: https://code.google.com/p/android/issues/detail?id=166828 and http://forum.xda-developers.com/showpost.php?p=59934854&postcount=5133
I noticed some bugs concerning fonts, it may be related.
These two are hard to try for me as I don't have a P5200 device (but I will investigate). Maybe @Angel_666 could take a look ?
Click to expand...
Click to collapse
@blits01 can you send\receive sms on your device?
Angel_666 said:
@blits01 can you send\receive sms on your device?
Click to expand...
Click to collapse
Sms and ussd work good
Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DOESN’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
- disabled SELINUX
- Camera key don't start camera app
- TV out removed, because it is not working yet
Downloads
ROM: Download
GApps: Download (not tested. Avoid using of gapps)
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://drive.google.com/file/d/0B-2dpW_lpZCPNWtxVnRVdUVTcVE/view?usp=sharing
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" kernel: https://drive.google.com/file/d/0B-2dpW_lpZCPT0VCS0tINHU5cnc/view?usp=sharing
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Enjoy OMNI!
THANKS TO
Special thanks to Rebellos & volk204.
Also big thanks to Alberto96 for his great optimized CM11.
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox, and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
sooti & Coldwindofnowhere for 6.0 kernel and rom patches (Galaxy S I9000)
and many other who help us.
Sources:
Device: https://github.com/fire855/android_device_samsung_wave
Vendor: https://github.com/fire855/android_vendor_samsung_wave
Kernel: https://github.com/fire855/android_kernel_samsung_aries
XDA:DevDB Information
Omni 6.0.1, ROM for the Samsung Bada OS
Contributors
fire855, Volk204, Rebellos, Alberto96
Source Code: https://github.com/fire855
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2015-12-22
Last Updated 2015-12-22
Changelog
22/12/15:
- First release
Reserved
Awesome.. Thanks fire855.. Going to try..
Hi fire855..
There is an error while flashing rom...
E : Error executing updater binary in zip /sdcard/omni 6.0.1-20151222 wave-HOMEMADE.zip..
abhijeet1331 said:
Hi fire855..
There is an error while flashing rom...
E : Error executing updater binary in zip /sdcard/omni 6.0.1-20151222 wave-HOMEMADE.zip..
Click to expand...
Click to collapse
Which recovery are you using? Flash the linked files with multiloader.
Good to know people are still working on our old device
Will try it when I have time
fire855 said:
Which recovery are you using? Flash the linked files with multiloader.
Click to expand...
Click to collapse
I flashed with the linked files only.. Same error..!!
Please check..
abhijeet1331 said:
I flashed with the linked files only.. Same error..!!
Please check..
Click to expand...
Click to collapse
You executed partition.sh?
fire855 said:
You executed partition.sh?
Click to expand...
Click to collapse
yes..
abhijeet1331 said:
yes..
Click to expand...
Click to collapse
For me it's working fine. Maybe you should try to start from beginning.
fire855 said:
For me it's working fine. Maybe you should try to start from beginning.
Click to expand...
Click to collapse
Ya.. Sorry to bother you.. I flashed Bada 2.0 once again & started from beginning & successfully installed the rom..
Thanks..
abhijeet1331 said:
Ya.. Sorry to bother you.. I flashed Bada 2.0 once again & started from beginning & successfully installed the rom..
Thanks..
Click to expand...
Click to collapse
Good.
Screenshot?
thinhx2 said:
Screenshot?
Click to expand...
Click to collapse
Added.
fire855 said:
Added.
Click to expand...
Click to collapse
idont see
thinhx2 said:
idont see
Click to expand...
Click to collapse
find it in the tab called screen shot above the op
Does marshmallow manage more efficiently the ram than lollipop? The last version was supposed to be an improvement in ram and cpu usage but after reading some reviews it seems that it's not really the case.
In short, my s8500 can benefit from this rom or did we go as far as it is possible with lollipop (didn't try yet, still stuck with kitkat but hearing from aboyazan78 it works flawlessly )?
Thanks for your answer
barbe31 said:
Does marshmallow manage more efficiently the ram than lollipop? The last version was supposed to be an improvement in ram and cpu usage but after reading some reviews it seems that it's not really the case.
In short, my s8500 can benefit from this rom or did we go as far as it is possible with lollipop (didn't try yet, still stuck with kitkat but hearing from aboyazan78 it works flawlessly )?
Thanks for your answer
Click to expand...
Click to collapse
bro i did not try this rom yet .. i told u to try another rom coz its very light
but will try this rom soon and come back with my review
External SD doesn't work. It doesn't get recognized in the rom, but it does in TWRP. What file system is needed?
Let`s emphasize that-- [highlight]THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT`S TO COME. AND SOME THINGS DOESN`T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.[/highlight]
Code:
[B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/B]
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Some SIM cards may not be recognized as the Lollipop more capricious in this regard.
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
- disabled SELINUX
- Camera key don't start camera app
- TV out removed, because it is not working yet
- many custom features from omni is still not merged
UPDATE from OMNI 5.1.1 from 27.12.2015 to 03.06.2026
ATTENTION! Since version 27.12.15 and ending 06.03.2016 F2FS used file system. Therefore, when flash on earlier versions and later, you need to follow the instructions from scratch. Also use these "start" kernels. This will remove your current rom and files.
f2fs "start" kernel is here: s8500, s8530
ROOT
Omni is without root support from default
To activate root flash zip via Recovery UPDATE-SuperSU-v2.46
Downloads
GApps: Download
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://yadi.sk/d/ilhyKTaEfTo6L
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" https://yadi.sk/d/wVGzUA96fGW55
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type sh partition.sh -> press Enter"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Enjoy OMNI!
HOW TO UNINSTALL
Just reflash bada via Multiloader
CHANGELOG:
14.02.2017 https://yadi.sk/d/BdsM-5VO3E5FS9
- Omni sources 14.02.2017
- Fix issue with not working partition.sh
11.02.2017 https://yadi.sk/d/yJaeiEZt3DvPAH
- Omni sources 11.02.2017
- Big update kernel from Coldwindofnowhere
Added CMA. Now, it is stable. This option allows you to have more available RAM as in BigMem.
Big thank's for Coldwindofnowhere and xc-racer99
- Update power management
- Added SQL optimization
- Added some RIL, ART tweaks
- Feedback from testers increased search speed of GPS satellites
- ROM compiled with Uber Toolchains 4.8 and 4.9 kernel, with the addition of optimizations ArchiDroid
arm-linux-androideabi-4.8
arm-eabi-4.9
11.01.2017 https://yadi.sk/d/FB2yJPyz38Ssx4
- Omni sources 11.01.2017
- Update kernel from Coldwindofnowhere
- Reworked RAM management and return to the ext4 file system to increase space and reduce lag
- New power management chipset and reduced display voltage
03.06.2016 https://yadi.sk/d/wFB7zDA0sCweM
- Omni sources 02.06.2016
- Small changes on kernel. Disabled volume tweaks.
- Small changes on RAM managment
- Set zRam zise to 128 Mb
09.05.2016 https://yadi.sk/d/YUx6MYyBraaUt
- Omni sources 09.05.2016
- Reworked ART parameters
- Disable the Battery Life Extender and Fast charging (not quite work correctly)
- Reduced zRam size to 96 Mb
- Added the latest fixes for GPS from Volk204
- Improved deep sleep the device
- Enabled hardware UI acceleration
- Some tweaks and fixes for RIL from Alberto96 and fire855
- Added settings for the stability of receiving 3G (experimental)
- Set the correct values of sound in the advanced settings
- Fixed lag after the call
- Fixed rewind the video in the player
- Big update kernel with latest changes from @Coldwindofnowhere https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/tree/android-5.1
14.01.2016 https://yadi.sk/d/MeqfNujemzK7J
- Omni sources 14.01.2016
- Added porting applications to SD-card with support for memory selection
- Added some options ART from aries
- Added Bigmem support in Advanced settings
with default settings we have 270 mb RAM with working 720p video recording
with Bigmem we have 283 mb RAM without working 720p video recording(as was by default in previous versions)
with Max RAM we have 315 mb RAM and camera, video playback and torch is not working at all
- New features in the kernel : Battery Life Extender, dynamic synchronization of files , dynamic control and fast charging . All of this can be found in Settings - Performance
- Added optimization zRam swap and support for the exFAT file system
- Added new planners SIO plus and BFQ, and new TCP algorithms
- Changed CPU frequency : min = 200 MHz , max = 1200MHz . Max can be reduced to 1000 MHz for energy saving
- Also enabled boost for incall volume in Advanced Settings
- Big kernel update from https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/tree/android-5.1
Big thanks to @Coldwindofnowhere
27.12.2015 https://yadi.sk/d/tyEMtPVHmXAVD
- Omni sources 27.12.2015
- Switch to f2fs file system (system partition increased by 100 MB to install GApps on a new file system)
- Minor optimization of ART and other kernel optimization for speed and stability
22.12.2015 https://yadi.sk/d/faohzx6CmRCRH
- Omni sources 22.12.2015
- The camera can shoot 1280*720 ( -10 MB of available RAM)
- Added new Governors and I/O planners to the kernel
- Changed minimum screen voltage ( 3.0V was - became 2.8V )
- Other kernel optimization for speed and stability
- Added support for TRIM
- Disabled menu button on the lock screen
14.12.2015 https://yadi.sk/d/NTt8Y6zymFAYu
- First release
THANKS TO
Special thanks to volk204 for their help to build this project.
Thanks to Alberto96, Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox, fire855 and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
sooti & Coldwindofnowhere for kernel and rom patches (Galaxy S I9000)
and many other who help us.
XDA:DevDB Information
[ROM][NAND|S85xx] OmniRom 5.1.1 Lollipop, ROM for the Samsung Bada OS
Contributors
djkoloda, volk204
Source Code: https://github.com/AMD-Grifon
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: OmniRom
Version Information
Status: Abandoned
Created 2016-04-17
Last Updated 2020-09-06
Good job bro.
Can u post some screenshot?
3. Advanced -> Terminal Command -> Select -> write sh partition.sh, press Enter
Thang Trinh said:
Good job bro.
Can u post some screenshot?
Click to expand...
Click to collapse
Thank`s! Screens will later.
@djkoloda When can we expect an update? Your ROM is awesome. Thanks a lot dear friend.
docamr said:
@djkoloda When can we expect an update? Your ROM is awesome. Thanks a lot dear friend.
Click to expand...
Click to collapse
@docamr Thank you for your kind words. The update will be today or tomorrow if there is no technical problems.
Before I publish the release, I have to check it thoroughly. So it will have to wait a little longer.
Take your time to polish your rom. If you need help for testing purpose you can count on me
barbe31 said:
Take your time to polish your rom. If you need help for testing purpose you can count on me
Click to expand...
Click to collapse
Thanks. I sent you a PM the build for the tests.
Please Update the ROM @djkolada
Dear @djkoloda
Please update the ROM bro. I am waiting eagerly.
docamr said:
Dear @djkoloda
Please update the ROM bro. I am waiting eagerly.
Click to expand...
Click to collapse
I finished the test and tomorrow will post an update. If there are any problems - write, so how on s8500 and s8530 results may vary and I can not detect all bugs.
Waiting to download and test update today.
djkoloda said:
I finished the test and tomorrow will post an update. If there are any problems - write, so how on s8500 and s8530 results may vary and I can not detect all bugs.
Click to expand...
Click to collapse
Please give us update today. I will test and give you feedback. Thank you djkoloda :good:
docamr said:
Please give us update today. I will test and give you feedback. Thank you djkoloda :good:
Click to expand...
Click to collapse
Given my "perfect" online, the build can push at the night ...
djkoloda said:
Given my "perfect" online, the build can push at the night ...
Click to expand...
Click to collapse
Bro can modified device tree omni to run on cm?
thinhx2 said:
Bro can modified device tree omni to run on cm?
Click to expand...
Click to collapse
In principle, not so difficult, but will take enough time for this.
djkoloda said:
In principle, not so difficult, but will take enough time for this.
Click to expand...
Click to collapse
Yes,wait bro build cm13
the update is delayed , OP busy at work, and then holidays.
Rom is finally ready! Enjoy!)) If there will be any problems with the battery drain, then send reports.
https://yadi.sk/d/mTSgRb2krUoGK
gapps
Hi,
looks good, what about some minimal gapps?
@djkoloda : good job. Couldn't try the version last week. Really faster than before. Now we can use it normally.
I tried to install pico gapps but it's insanely slow.
I will perform much deeper test but it is quite good a version.
Lineage OS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
[SIZE="2"]* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
[/SIZE]
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest official TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
KitKat is required, before you flash cm13.[/B]
Download links:
ROM: Click Here
Gapps: http://opengapps.org/
Credits :Huge thanks to @aapav01 for bringing up Cm13 fo our device @adityaupreti for new device sources and help
@SoUnd001 for front cam fix
@[email protected] and @Vladi4ik94 for testing and help
XDA:DevDB Information
CM13 for Grand 2, ROM for the Samsung Galaxy Grand 2
Contributors
Shujath
Source Code Common: https://github.com/ms013g-common
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-05-03
Created 2016-05-03
Last Updated 2016-05-03
Bug reports:[/SIZE][/B]
LineageOS 13 is in development and has several small bugs and missing translations, so in this thread we'll try to focus on device-specific bugs. Complaints/demands/bug reports without logs will be ignored.
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
Buggy Live Display
Buggy GPS but it works
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Change Log 13th May:-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Change Log 19 September:-
Rear cam fix
Added Gello browser
Security patch level updated to September
Updated theme manager with new UI
New optimizing apps view
Upstream Merge
Change Log 19 September 2nd build:-
Fixed GPS
Change Log: 02 OCtober :-
Updated Kernel Configuration
Added Z Cache
Updated Power Profile for better performance
Upsteam Merge
Change 03rd OCtober :-
Updated Kernel Configuration
Updated audio accelerator in kernel
Enabled Zcache and added Zram
Updated battery capacity to 2600mah in the power profile.
Updated Auto Brightness levels from 4 to 10
Autobrightness backlight update
Updated media profiles of the device which was outdated
Added custom power hal to increase battery life
Change 27th Jan :-
Good Bye CyanogenMod
Welcome LineageOS
Applied Front Cam fix by @SoUnd001
Removed Zcache as it was causing Offline Charge bug
No Need to flash multiple files from now, Just flash ROM and Gapps
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Shujath said:
Change Log :-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Click to expand...
Click to collapse
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Invalid response from the server: 502
can`t download :/
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Some AFH servers are down atm,wait for sometime.
praveensingh569 said:
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Click to expand...
Click to collapse
You are welcome
aapav01 said:
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Click to expand...
Click to collapse
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
[email protected] said:
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
Click to expand...
Click to collapse
You are wecome, Enmjoy the ROM
neonkat said:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Click to expand...
Click to collapse
Yup fixed now, thanks
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Yes AFH Is down
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Igor2906 said:
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Click to expand...
Click to collapse
Do a clean install
Sent from my SM-G7102 using XDA-Developers mobile app
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Hi, thanks for your update.
"Go to Settings > Display & lights and disable prevent accidental wake-up."
but i couldn't find "prevent accidental wake-up" option in settings, please help on this
Shujath said:
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
Click to expand...
Click to collapse
Aditya have remove my Commit history there nothing changed in vendor bcoz if he change anything in vendor it may break things like RIL, :good:
faizauthar12 said:
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Click to expand...
Click to collapse
I did
@Shujath after 1day of use, the Rom is very good..Thanks you very much bro.. i found only 2 issues,
- frontCam
- SDcard Name showing 'sdcard1'
grupix said:
do a clean install
sent from my sm-g7102 using xda-developers mobile app
Click to expand...
Click to collapse
\
Вас зрозумів!
igor2906 said:
\
Вас зрозумів!
Click to expand...
Click to collapse
СЛАВА УКРАЇНІ!!!
Good day. I'm really grateful for this ROM. It is nice, but i have an issue. I can't seem to access the internet on my phone, even though i can see the network. But i can access it through mobile hotspot. I don't understand why.