Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...
Related
I have tried the same steps in the video here
http://www.youtube.com/watch?v=CwUPYHnOIQU
Basically with the power plugged into the tablet multi touch is perfect. but without the power adapter plugged in there are issues, which you will see in my video. Its hard to explain. But i've had this issue on Calkulins+Clems v4 and Vegan 5.1.1
Please could someone also test this to see if its just my tablet, this way I know i need to send it back to viewsonic for a replacement while its under warranty.
Any help is appreciated.
Using BC and seem the same behavior - the "Fix Me" re calibration app does not help but I was unaware of the plug in fix.
Hello everyone,
I dont know if there is anyone who can help me out, as I've seen quite a few posts about this subject already.. but none worked for me.
What happened: Last night when I set my alarm I got an update from Nokia and I accepted the install, when the phone rebooted it was spinning gyros and then the sad face.
What I've tried: Hard Reset(Volume Down + Power + Camera), Soft Reset(Volume Down + Power) - tried a few tricks where I had to connect the phone to my PC but I had no luck there as my phone does not seem to want to make contact with my pc.
I've made a small video where I demonstrated the resets and all. notice the weird line at ~0.12. Here an image. This is not just on the film it happens pretty often.
after youtube dot com /watch?v=_UTEanWOS4w&feature=youtu.be
http :// img607.imageshack .us/img607/6884/weirdline.png
Please,
If there is anyone out there who knows how to approach this situation, i'd be REALLY thankful. Any more info needed?
Proflax said:
Hello everyone,
I dont know if there is anyone who can help me out, as I've seen quite a few posts about this subject already.. but none worked for me.
What happened: Last night when I set my alarm I got an update from Nokia and I accepted the install, when the phone rebooted it was spinning gyros and then the sad face.
What I've tried: Hard Reset(Volume Down + Power + Camera), Soft Reset(Volume Down + Power) - tried a few tricks where I had to connect the phone to my PC but I had no luck there as my phone does not seem to want to make contact with my pc.
I've made a small video where I demonstrated the resets and all. notice the weird line at ~0.12. Here an image. This is not just on the film it happens pretty often.
after youtube dot com /watch?v=_UTEanWOS4w&feature=youtu.be
http :// img607.imageshack .us/img607/6884/weirdline.png
Please,
If there is anyone out there who knows how to approach this situation, i'd be REALLY thankful. Any more info needed?
Click to expand...
Click to collapse
Use Nokia Care Suite recovery option. It'll re-flash the latest ROM for your phone.
petard said:
Use Nokia Care Suite recovery option. It'll re-flash the latest ROM for your phone.
Click to expand...
Click to collapse
But I cant seem to be able to make contact with my PC, it can only charge up, when its "charged"(minimum) it gets back to the spinning gears :/
Or I just dont understand how to connect it or something.. just the regular way right? MiniUSB to USB port?
Proflax said:
But I cant seem to be able to make contact with my PC, it can only charge up, when its "charged"(minimum) it gets back to the spinning gears :/
Or I just dont understand how to connect it or something.. just the regular way right? MiniUSB to USB port?
Click to expand...
Click to collapse
I fixed it
For other people: Delete ur old Nokia Care Suite, And read this carefully: http://forum.xda-developers.com/showpost.php?p=40988591&postcount=8&nocache=1&z=3183260376099497
Next: http://forums.wpcentral.com/nokia-l...after-reset-flash-process-defined-inside.html and skip the first part about navi
Cheers everyone!
Thanks Proflax.
Sent from my Lumia 920 using XDA Windows Phone 7 App
Hey, when I activated BT on my computer (W8) and my phone, and I make a scan trough my phone, it doesn't detect my computer! Idk if the problem come from my phone or my computer. Thx
Oh come on, surely you can work out the obvious answer without creating a new thread here?
Why act like this? I searched in the forum but didn't find. Can someone help me thanks.
Up
Up
Up!
Hello everyone,
I could not find an answer to unbrick my android smart tv player, so I wanted to ask you guys in this forum for help.
The player does not boot I believe since ther is no picture on the screen and it does not show any reaction on inputs from the remote (usually the LED on the front blinks at input). Only the power button on the remote works and turns the device on and off. Thats it
I found several solution to unbrick Android Players which have a hidden button behind the AV jack, but those are different models that have different ports. I also tried holding down Vol- Home and Power on the remote to get into recovery, but it doesn't work. I attached pictures of my device.
Is there a way to boot into recovery using USB or SD Card. The dievice has 2 USBs and a SD Card slot.
Or any other way to unbrick or factory reset it.
Thanks so much!
Does anyone have experience with this device
Hi,
Does anyone have experience with this kind of device.
I'm still searching the web for any infos of this device.
Did someone alredy experiment with this box? I also tryed to find different firmware as well.
Its form some Chinese manufacturer. They sent me a new firmware but it didnt work unfortunately.
I thought there would be a way similar to cell phones, to just put a new custom ROM on the device?
Please help!
Thanks!
Now I got some idea what kind of device it is, and some others have troubles too.
I found this thread with the unsolved problem:
http://forum.xda-developers.com/showthread.php?p=50374750
Perhaps someone can help.
Thanks
Dear forum/friends
I have the subject Android TV box and I was very pleased since yesterday.
I installed a Netflix APK , and though it start working flawlessly, after I turn the box off, the signal could not be detected .
I tried various TV's, and different HDMI cables but nothing.
It seems that it starts properly but can not be recognized from the tv.
I tried also to connect it through a PC but nothing again.
I am not sure that is related to The APK installation but it started behave like this right after I tried this program.
I suspect that the resolution has changed and this is the reason for the disfunction.
Is there any way to set it to the factory settings.
Your assistance is highly appreciated
Thanks in advance.
I still have not found a solution , neither a helpful advice has arrived.
Does anyone know if there's a way to manually reset/reboot the device? Let's say through hidden features in the remote control or any button from the device itself.
Any idea is more than welcome.
Thanks again
Sent from my Redmi Note 3 using Tapatalk