Issues with Baseband on 10b - Verizon LG G3

Hello everybody
I have a few questions regarding my phone and I hope you can help me solve them. I have the VS985 and I had it on 35b Lollipop 5.1.1 I was able to root it but then I realized there's no custom recovery for it yet, I was planning to try skydragon, so I downgraded using the TOT method to 10, so far so good, nonetheless, in order for me to try to install that ROM I read that I had to have the 35b boostack, so I installed the xdabbeb_vs98535b_bootstack.zip file, TWRP 2.8.7.0 says that installs successfully, I restart the phone but when I go to baseband says unknown and sure enough I can't install skydragon or cm13 because it says I don't have the 35b baseband.
I've tried the 24b, 23c and 12b modems, all get me baseband unknown and get no signal on Tmobile. The TOT I used was LG G3 VS985 10B_03 Stock TOT. I've been looking online and everybody says just flash the baseband on TWRP and voila! but not my case, I can flash it but doesn't work.
Any help is very much appreciated. Thank you.

Hello!
It is incorrect that you have to have the 35B bootstack to be on SkyDragon (same with JasmineROM). The only time it's a must is if you want to use Advanced Calling, or just plain want to use the latest modem. SkyDragon and JasmineROM contain several partitions from 24B. Flashing the ROM after the bootstack is what caused the issue, because critical partitions in the 35B bootstack were overwritten by their 24B counterparts that are in the ROM.
If you want the 35B bootstack, then you need to flash that after having flashed SkyDragon.

roirraW "edor" ehT said:
Hello!
It is incorrect that you have to have the 35B bootstack to be on SkyDragon (same with JasmineROM). The only time it's a must is if you want to use Advanced Calling, or just plain want to use the latest modem. SkyDragon and JasmineROM contain several partitions from 24B. Flashing the ROM after the bootstack is what caused the issue, because critical partitions in the 35B bootstack were overwritten by their 24B counterparts that are in the ROM.
If you want the 35B bootstack, then you need to flash that after having flashed SkyDragon.
Click to expand...
Click to collapse
Hello there!
So let me explain a bit more about my situation, I currently have 4.4.2 stock 10b I downgraded from 35b 5.1.1. I rooted the phone and installed TWRP but when I try to flash CM 12.1 or CM 13, I mentioned skydragon but my mistake is CM what I want to flash, I always get the error that the modem isn't the right one, I've tried with several modems and same error. What can I do install CM?
Thank you

Elendil_23 said:
Hello there!
So let me explain a bit more about my situation, I currently have 4.4.2 stock 10b I downgraded from 35b 5.1.1. I rooted the phone and installed TWRP but when I try to flash CM 12.1 or CM 13, I mentioned skydragon but my mistake is CM what I want to flash, I always get the error that the modem isn't the right one, I've tried with several modems and same error. What can I do install CM?
Thank you
Click to expand...
Click to collapse
Either flash the 23C or 24B modem before flashing CM12.1/13. The 24B bootstack contains the 24B modem so you can flash that before trying to flash CM.
Edit: I haven't tried CM12.1 in a long time, and I've never tried CM13 so this is based only on old information which was definitely true at one time, at least for CM12.1. Repeat, no personal experience with CM13. I only chimed in at the mention of SkyDragon.

roirraW "edor" ehT said:
Either flash the 23C or 24B modem before flashing CM12.1/13. The 24B bootstack contains the 24B modem so you can flash that before trying to flash CM.
Edit: I haven't tried CM12.1 in a long time, and I've never tried CM13 so this is based only on old information which was definitely true at one time, at least for CM12.1. Repeat, no personal experience with CM13. I only chimed in at the mention of SkyDragon.
Click to expand...
Click to collapse
Hey there!
Thank you for your help! Well this I what I've tried, I restored to 10b using TOT I installed all modems, 12b, 23c, 24b and 35b and all of them are giving me unknown baseband afterwards, I get no signal, so I figured I'll install CM on top, but guess what? it always gives me the error that the baseband isn't the right one. I'm not trying to restore to 10b by using the KDZ method and then I'll install the modem. I don't know what is going on.
Thank you for helping on this.
P.D. I'll try skydragon to see what happens, I didn't install it because I read gives no data on Tmobile.

Elendil_23 said:
Hey there!
Thank you for your help! Well this I what I've tried, I restored to 10b using TOT I installed all modems, 12b, 23c, 24b and 35b and all of them are giving me unknown baseband afterwards, I get no signal, so I figured I'll install CM on top, but guess what? it always gives me the error that the baseband isn't the right one. I'm not trying to restore to 10b by using the KDZ method and then I'll install the modem. I don't know what is going on.
Thank you for helping on this.
P.D. I'll try skydragon to see what happens, I didn't install it because I read gives no data on Tmobile.
Click to expand...
Click to collapse
Hello! I have an update
So this is what I did, I downloaded SkyDragon V6.0.2 and installed on the 10b vesion and it worked just fine, I didn't want to risk to try to flash CM anymore but so far everything is working! even data on roaming, I'm currently in Canada and the Telus network is flying, over 70mb on download, as a matter of fact, I never seen those speeds in the US, at least where I live.
I'm sure if I flash CM from TWRP it will work because I'm using the 35b baseband.
Thank you all for your help!
Merry Christmas and Happy 2016!

Elendil_23 said:
Hello! I have an update
So this is what I did, I downloaded SkyDragon V6.0.2 and installed on the 10b vesion and it worked just fine, I didn't want to risk to try to flash CM anymore but so far everything is working! even data on roaming, I'm currently in Canada and the Telus network is flying, over 70mb on download, as a matter of fact, I never seen those speeds in the US, at least where I live.
I'm sure if I flash CM from TWRP it will work because I'm using the 35b baseband.
Thank you all for your help!
Merry Christmas and Happy 2016!
Click to expand...
Click to collapse
Cool, glad you got what you need. You're welcome!
HAPPY NEW YEAR!

Related

Flashing roms

Just got this phone. Not real fimiliar with aosp. If I'm on 10b firmware with bumped twrp can I flash any Rom no matter it's base is ie 11 or 12b
alphamale said:
Just got this phone. Not real fimiliar with aosp. If I'm on 10b firmware with bumped twrp can I flash any Rom no matter it's base is ie 11 or 12b
Click to expand...
Click to collapse
You can flash any Verizon Rom at this point. The Rom's won't include the updated modems, if you want to update those you can flash them separetely - http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958

[Q] Help TWRP install Lg G3 vs985

I keep getting this error which says, "boot certification vertify". when I try to go into recovery mode. To begin with, I have updated my vs985 to 5.01 lollipop and then I had my device rooted. From this I have tried using apps like Flashify or using adb to flash TWRP 2.8.6.1 touch recovery for vs985. When I flash it I then boot into recovery to see that boot certification error. Can someone please help me fix this? If you need any more info just ask.
rokyle said:
I keep getting this error which says, "boot certification vertify". when I try to go into recovery mode. To begin with, I have updated my vs985 to 5.01 lollipop and then I had my device rooted. From this I have tried using apps like Flashify or using adb to flash TWRP 2.8.6.1 touch recovery for vs985. When I flash it I then boot into recovery to see that boot certification error. Can someone please help me fix this? If you need any more info just ask.
Click to expand...
Click to collapse
You need to upgrade with jasmine or skydragon stock roms from a kk build, if you want to keep twrp and root. You have some partitions that need to be replaced, that's why you get the error.
bweN diorD said:
You need to upgrade with jasmine or skydragon stock roms from a kk build, if you want to keep twrp and root. You have some partitions that need to be replaced, that's why you get the error.
Click to expand...
Click to collapse
So I would just flash the Jasmine rom then I could reroot my device and flash twrp or do I have to root and flash twrp, install partitions and then upgrade with Jasmine rom?
rokyle said:
So I would just flash the Jasmine rom then I could reroot my device and flash twrp or do I have to root and flash twrp, install partitions and then upgrade with Jasmine rom?
Click to expand...
Click to collapse
flash any KK version (12b preferred), root and twrp, flash skydragon or jasmin L upgrade rom, profit!
Your using the wrong TWRP for verizon.
Use this one. http://downloads.codefi.re/thecubed/lg_g3/bump/twrp-2.8.0.0_vs985-signed.img
Sent from my VS985 4G using XDA Free mobile app
what version of trwp should i use i just downgraded to 12b have root and have twrp manger downloaded just dont know witch one to use lil new to the g3 thanks for any help
Sorry for the delay,but thanks what you did worked! Now I have twrp on my g3, thanks!
rokyle said:
Sorry for the delay,but thanks what you did worked! Now I have twrp on my g3, thanks!
Click to expand...
Click to collapse
Did you flash to a KK 12b version method?
Using the image that Sublime posted resulted in the same issue.
I upgrade my phone to 12B then I rooted and flashed the newest version of twrp which happens to be then 2.6.8.1 version I think. Then I flashed the Jasmine rom....
phoenixaldana01 said:
what version of trwp should i use i just downgraded to 12b have root and have twrp manger downloaded just dont know witch one to use lil new to the g3 thanks for any help
Click to expand...
Click to collapse
Use the latest version that TWRP Manager offers, then use TWRP to flash the latest one on XDA made for the G3.
Sent from my VK810 4G

[Q] In what order to install ROMs?

Will a developer please explain in order the process to install custom ROM on VS985 10b
I have already flashed to 10B, root w/ one click root, installed flashify, flashed Philz CWM, in recovery i wiped everything, installed Bliss Pop 3.3, installed Banks GAPPS, then I tried flashing Bliss kernal and bam soft brick. Sorry I guess I'm still a Noob. Will someone please explain what i did wrong and the correct way to go about this. I am currently VS985 10B w/o root. I will try to be patient and wait to try again when someone corrects me. lol Thank you to all developers and especially the Bliss Pop team! I love the ROM, still trying to get used to LP though.
skylerfin said:
Will a developer please explain in order the process to install custom ROM on VS985 10b
I have already flashed to 10B, root w/ one click root, installed flashify, flashed Philz CWM, in recovery i wiped everything, installed Bliss Pop 3.3, installed Banks GAPPS, then I tried flashing Bliss kernal and bam soft brick. Sorry I guess I'm still a Noob. Will someone please explain what i did wrong and the correct way to go about this. I am currently VS985 10B w/o root. I will try to be patient and wait to try again when someone corrects me. lol Thank you to all developers and especially the Bliss Pop team! I love the ROM, still trying to get used to LP though.
Click to expand...
Click to collapse
The order of flashing you explained is fine. Make sure the kernel is made for the same build as your ROM, ie. 4.4 kk, 5.0 LP, or 5.1 LP etc.
Since everything is fine until you flash the kernel, I'm betting the kernel is not matching the rom.

Sim card not detected on CM 12.1 or 13

So here's where I am and how I got here... Just got an lg g3 that was running 12b and immediately wanted to put CM on it like I have with all my other samsung phones. Root / TWRP went on no problem, my problems began when I decided to update to CM 12.1. Found out my baseband was incompatible so I installed modem for 35b (no problem) then installed cm12.1 and gapps. After it booted up, it tells me I have no sim card installed. Usually this is modem driver related, but I can't find anyone who has had this problem.
Anyone have any advice?
There's other partitions needed than the modem for the 35B modem to work. Flash one of @xdabbeb 's bootstacks in his VS985 v2.0 ROM thread in Development.
Very important: flash the 24B bootstack before flashing any ROM other than @xdabbeb 's. After flashing the ROM you can try flashing the 35B bootstack. If that doesn't work, try the 24B bootstack.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Cm 12 an 13 run fine with 35b just flash 35b bootstack them the Rom works fine.
Sent from my VS985 4G using XDA Free mobile app
Thanks for the replies. I got it working with the 24b modem. I'll try flashing the bootstack so I can have 35b going.
Installing that bootstack got everything working except google maps hangs on load and eventually has to be forceclosed. Can't find that this is a known issue w/ cm13, so it must be something I messed up during my buggered install.
I'm on the same boat, installed CM12 with 12B and ran fine, updated to 12.1 and 24B, still got reception, but once I flashed CM13 with 35B sim card stopped working.
Verizon VS985
I went from cm12.1 to cm13 yesterday and had this same issue on the 35b bootstack. The ROM would not detect the sim card at all and cellular network options was greyed out. I tried reflashing a few times and same result everytime. I gave up on trying to get that to work and went to stock marshmallow which is okay but id love to get cm13 working. I am also running a straight talk sim card so I don't know if that would cause any issues on the 35b bootstack or not. I never had any issues on lollipop besides having to change my APN settings for data. Also on stock marshmallow in the setup wizard it detects that my sim card is not for Verizon wireless so I go change the network settings from global to LTE/GSM/UMTS and it picks it right up.
I have the same issue. Running resurrection remix 6.0.1 with 35b. Verizon sim works but tmobile sim does not.
roirraW "edor" ehT said:
There's other partitions needed than the modem for the 35B modem to work. Flash one of @xdabbeb 's bootstacks in his VS985 v2.0 ROM thread in Development.
Very important: flash the 24B bootstack before flashing any ROM other than @xdabbeb 's. After flashing the ROM you can try flashing the 35B bootstack. If that doesn't work, try the 24B bootstack.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Click to expand...
Click to collapse
pls how can i download 24b modem and flash it?
torniex said:
pls how can i download 24b modem and flash it?
Click to expand...
Click to collapse
For just the modem, @bweN diorD 's stickied thread in the General section. For the whole 24B Bootstack, @xdabbeb 's VS985 v2.0.0 ROM thread in the Development (non-original) section. The Bootstack would be easier since I know it's in a zip file - not sure if the modem is, so it'll be easier to flash in TWRP.
hi there!
I'm flashing CM13 on my VS985, I try flashing the 24B bootstack, 35b and doesn't work the network. Isn't trouble about APN and things like this. Simply my phone doesn't recognize my sim. Hardware is completly working, i'm using CM12 and work fine, CM13 have some bug?
roirraW "edor" ehT said:
There's other partitions needed than the modem for the 35B modem to work. Flash one of @xdabbeb 's bootstacks in his VS985 v2.0 ROM thread in Development.
Very important: flash the 24B bootstack before flashing any ROM other than @xdabbeb 's. After flashing the ROM you can try flashing the 35B bootstack. If that doesn't work, try the 24B bootstack.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Click to expand...
Click to collapse
darwyn001 said:
hi there!
I'm flashing CM13 on my VS985, I try flashing the 24B bootstack, 35b and doesn't work the network. Isn't trouble about APN and things like this. Simply my phone doesn't recognize my sim. Hardware is completly working, i'm using CM12 and work fine, CM13 have some bug?
Click to expand...
Click to collapse
You should probably check in the CM13 thread. I haven't tried CyanogenMod in over a year, I'm always not satisfied enough with it over debloated stock - too buggy for me. I think lots of people in the CM13 thread have mentioned problems with the network/mobile data and/or possible solutions.
ThunderClam said:
Thanks for the replies. I got it working with the 24b modem. I'll try flashing the bootstack so I can have 35b going.
Click to expand...
Click to collapse
please i'm having the same problem can you tell me exactly how u fixed it ?
---------- Post added at 04:59 PM ---------- Previous post was at 04:54 PM ----------
ThunderClam said:
Thanks for the replies. I got it working with the 24b modem. I'll try flashing the bootstack so I can have 35b going.
Click to expand...
Click to collapse
please i'm having the same problem can you tell me exactly how u fixed it ?
Fix It!
I can fix it, I just need flash the 24b bootstack, cm 12.1, run the system, after flash cm13 and do wipe data. This is the solution for me.
roirraW "edor" ehT said:
You should probably check in the CM13 thread. I haven't tried CyanogenMod in over a year, I'm always not satisfied enough with it over debloated stock - too buggy for me. I think lots of people in the CM13 thread have mentioned problems with the network/mobile data and/or possible solutions.
Click to expand...
Click to collapse

Rooting Unlocked Phone

I am about to root my LG G3 that's running VS98510B. It is unlocked, so will rooting it make the network limited to Verizon again?
Please in the future post questions in the Q&A section. I'll ask a moderator to move this thread.
All Verizon devices aren't SIM locked, and rooting doesn't affect that.
Just in case you don't already know, use the Stump app here on XDA to root using the brute force option, then use TWRP Manager from the Play Store to install TWRP. Rooting on higher than 10B gets more complicated, as does putting TWRP on higher than 12B.
Upgrade
roirraW "edor" ehT said:
Please in the future post questions in the Q&A section. I'll ask a moderator to move this thread.
All Verizon devices aren't SIM locked, and rooting doesn't affect that.
Just in case you don't already know, use the Stump app here on XDA to root using the brute force option, then use TWRP Manager from the Play Store to install TWRP. Rooting on higher than 10B gets more complicated, as does putting TWRP on higher than 12B.
Click to expand...
Click to collapse
Would it be okay to TWRP to flash VS98547A after I root?
Sorry for starting this thread in the wrong section.
yqazi27 said:
Would it be okay to TWRP to flash VS98547A after I root?
Sorry for starting this thread in the wrong section.
Click to expand...
Click to collapse
Yes, you can flash any ROM you want. Just from TWRP, wipe Cache, Dalvik/ART and Data, flash @xdabbeb 's 47A stock pre-rooted firmware and his 35B Bootstack (the Bootstack is from his VS985 v2.0 ROM thread). Don't wipe after flashing the ROM or you could lose root, although if you do, you can dirty flash the ROM to get root back. There's also optional debloat zips in the third post of his 47A firmware thread if you like.
No problem mate!
Bootstack
roirraW "edor" ehT said:
Yes, you can flash any ROM you want. Just from TWRP, wipe Cache, Dalvik/ART and Data, flash @xdabbeb 's 47A stock pre-rooted firmware and his 35B Bootstack (the Bootstack is from his VS985 v2.0 ROM thread). Don't wipe after flashing the ROM or you could lose root, although if you do, you can dirty flash the ROM to get root back. There's also optional debloat zips in the third post of his 47A firmware thread if you like.
No problem mate!
Click to expand...
Click to collapse
What is bootstack?
yqazi27 said:
What is bootstack?
Click to expand...
Click to collapse
That answer is in the thread I told you where the Bootstacks are.

Categories

Resources