Hi,
I purchased a 32" TCL Roku tv for my children and was hoping to gain ADB access. I noticed that someone has succeeded with this on a 55" TCL model TV via port 8090 and a Chinese application. What they did was use an app called TCP&UDP and send the command 'start adbd' however the 32" inch model does not have this port open. It has port 8060 and 9080. 8060 is an XML page via http, 9080 is a page that state 'status=ok'. I have sent the command to both ports with no luck.
Does anyone have this TV and had success enabling ADB?
This is the one i ordered.
ports
Did a little checking, there are 2 ports on the TV.
Port 8060 which appears to be an XML page for the Roku side of things.
It also has A port 52113 which I am not sure of. I tried to send the command "start adbd" on 52113 with no success. Anyone else get one of these for Christmas? Would love to get some input on this.
Related
My Archos 70it just broken LCD...
I won't think about change lcd because no one ship to Vietnam (price to change lcd from dealer here up to 120us)
So I want to plug it in my TV LCD via HDMI and use as a video box.... Anyone can tell me how to connect it with TV without select Switch to TV in the setting ???
I can do everything with adb, my A70 had been rooted !
Someone help me plz !
I don't think it's possible with original Android, maybe $auron can help you to see if UrukDroid can boot directly to the HDMI out.
Good luck
Note: This is speculation, I don't know if this will work for your problem.
I don't know about doing it from boot, but I know you can launch apps from adb with the "am start" command, so maybe if you can find the name of the intent for the switch to tv app, you can do it through adb. The resource I found this from is http://www.android.pk/blog/general/launch-app-through-adb-shell/
Not sure if it will work, but good luck, I hope it does!
Yea...! "am start" run app... kool
... but "switch to TV" look like not an app... maybe an internal command.
Any else help me ??? or some one ship LCD to me !?
I don't have hdmi cable so I can't test, but you may try this in adb:
echo 1 > /sys/devices/omapdss/display1/enabled
Hey guys, does anybody know of an app or a method that will allow me to stream video (not YouTube or Netflix) to my Vizio Smart TV? It's a really new TV with all kinds of features...I know I could simply hook up my MacBook to an HDMI port or even stream video via Apple TV, but I don't usually have those things in my living room. I'm just basically hoping to be able to stream a movie playing from an app like Showbox(or something similar to) to my TV, without any wiring. Samsung's screen mirroring feature would be ideal...if it wasn't limited to ONLY working with other Samsung products Anyways...please, if you can let me know of anything you've heard of, or have used that might make this possible, it would be greatly appreciated!!:fingers-crossed:
Unless Vizio has some type of app for their TV that I never heard of, there needs to be hardware plugged into the TV that receives the stream. Cheapest and easiest way to do this with android is a Chromecast, $35 bucks, I believe it can or soon will be able to fully mirror your screen no special root app required.
you can use the mdl to hdmi adapter from Sammy and keep a spare (but hidden) hdmi cable plugged into the tv. As far as wireless Chromcast
Did you find a solution?
Did you find an App solution for this? I recently purchased a Vizio and looking for the same?
Can some one help me play videos from phone to my vizo 70 inch smart tv I've tried everything the closest thing I've come up with is I media share but it doesn't allow me to watch it always states video, audio not supported
You need something on the TV Side - I used Fire TV stick
Hi,
i have bought an mx10 tvbox, i am connecting to video composite to rca on screen fujitsu plasmavision w 50". That screen is oldie but 1080 capable, i tried to connect the tv box to the screen with the hdmi cable and a converter to dvi-d in the other side but that doesnt work, you only see the initial boot screen and then you can see on the screen OUT OF RANGE and then nothing. i have read you need to change the hdmi auto to manual resolution on the tv box, for that i used a newer display connecting hdmi to hdmi an tried all of the resolutions manually wich i changed on the newer display and then connecting to the older with the same result, no image at all only the boot MX10 screen. I´ve tried all of them including 720 and even 480 and again no result, do you know what could be happening or how can i make the tvbox to display on my older screen thru dvi-d?
thanks in advance, i have some advanced knowledge on linux/android/windows. i even tried connecting my windows laptop to the older screen with the same cable configuration and it worked perfect at 1366 x 768, have even tried changing resolution on tv box with "adb shell ws (several configurations)" same result at all, what could be posibly wrong if windows laptop displays flawless on my old screen but not my tvbox, how can i fixit please? any experienced member?
hi...i have same problem too... anyone can help??
i use MX10 Pro 6k...
i cannot find the Display settings to change the resolution
I just found my „old“ iptv box from my old ISP.
After a bit of googling i found out it runs on android.
I managed to plug in a usb keyborard and mouse and was able to open the „Calendar“ app using Win+C.
I can also take screenshots using PrintScreen and go into the Android Keyboard settings. There is no nav neither a status bar.
Is there any possibility to get into the „Settings“ app so i can enable ADB and upload my own APKs?
The Box has only gotten a USB A, HDMI, Ethernet, Audio and Power Port. If there is any need, i can also upload an image of it.
Thanks in advance!
I've just received my first android TV box, this one
https://banggood.onelink.me/zMT7/wda08nyk, and I was wondering if anyone knew where I can go to get alternative ROMs for it? I'm specifically looking for Android TV based ROMs, as it ships with standard android (pretending to be a pixel 3).
I haven't found any. It's still a very new device. There are updated stock FW, though. Not much of an improvement. Here are updated stock Images.
Hello
Same problem here, it is pretending to be Googlre pixel 3
Any idea when would someone make Android TV based ROM?
If you own one of these H618 devices, can you please run the following command on your device to see if it has malware similar to the T95 H616?
Code:
adb shell "getprop ro.product.device ; [ -d '/data/system/Corejava' ] && echo 'Corejava exists' ; ! [ -d '/data/system/Corejava' ] && echo 'Corejava not present'"
Thanks!
Hi I am trying to connect my android box T95z plus to a Samsung tv, but when I try the signal is not getting though, although the hdmi connection is found there is a red cross symbol by the hdmi icon on TV.
However I can connect the Bix to my other fire tv with no issue and same cable!
This is really driving me mad.
And advice greatfully received thanks in advance
Jonnybourne said:
Hi I am trying to connect my android box T95z plus to a Samsung tv, but when I try the signal is not getting though, although the hdmi connection is found there is a red cross symbol by the hdmi icon on TV.
However I can connect the Bix to my other fire tv with no issue and same cable!
This is really driving me mad.
And advice greatfully received thanks in advance
Click to expand...
Click to collapse
this issue is common, the tvboxes don't support every possible resolution out there, your tv may have a specific resolution or refresh rate that isn't supported by the tv box, so the tv box can't switch to the correct resolution because it doesn't exist.
i'm not by my tv box now, but if i recall correctly, there is usually an option to disable automatic switching to the correct resolution, you can turn that off so the box doesn't automatically switch to a resolution the TV chooses. then plugin the box to a monitor or another tv, choose a resolution manually on the tv box, then plug it back to the samsung tv, if still no signal, repeat the process with a different resolution.
this worked for me with 2 tv boxes Q96+ and HiMedia Q5 or Q7 i can't recall, but also hasn't worked with every box that did that, so it's a hit or miss.
good luck
You may want to try something like THIS. I had similar issues with both h616 and h618 boxes. In the settings for display, the h616 had a toggle for TV HDMI control.