hello everybody
daily i am set 3g setting for alot of devices (Samsung - lg - etc ) but today LG Transpyre vs810 pp is showing this on DFS and cant enter programing window
what it is cps na error , related with msl and spc or not
how to get hidden menu for this model , and how to check for if spc is already six zeros
note : in Dfs port window , lg diag port is exist but when double click in it , no thing happened and this the problem
i cant post image to explain the problem due to forum laws
You have to use LG VZW whql 2.2.0 drivers. Reboot after installation.
Related
H
Does anyone know how to access the NVM using QPST efs or bitpim?
Also installed the drivers for the modem but the query for modem does not work. My HTC is set at com 1, but nothing or any communicate works.
When I type ##3424 Send, I activate the Serial mode, I cant not communicate with it.. I have tried everything...
Also Verizon phones don't come SPC locked "000000"
Model: XV8600 HTC Verizon
I am using;
QXDM : ....sendspace.com/file/lijquh....
BITPIM: ....sourceforge.net/project/downloading.php?groupname=bitpim&filename=bitpim-1.0.2-setup.exe&use_mirror=ufpr...
QPST : ....sendspace.com/file/7y7l9e....
Converter: .....mobile-files.com/forum/showthread.php?t=63303.....
This sw can read the SPC locks on this phone, run cdma_wshop_loader.exe
CDMA Workshop: ....rapidshare.com/files/96166114/cdma_workshop_FREE.rar.html....
password=ogmisthebest to unzip it and password for cdma_wshop_loader.exe
QQ:75229847china
Okay, so Im trying to do a PRL update on my Virgin Mobile LG Optimus V. I downloaded all the required software (CDMA Workshop, QPST v2.7.323_(2008-09-19), and the newest PRL for Sprint 60683). I installed the LG Universal Serial Drivers v3.3, and then installed CDMA Workshop. I opened Device Manager in Windows start menu, checked the current port of the LG Android Platform USB Serial Port (which is set to COM2), I then enabled USB Debugging on my phone, opened CDMA Workshop, clicked the drop-down menu to connect to port COM2, and it connected, BUT sometimes it randomly doesnt connect. After it successfully connected to COM2, I clicked on the "Security" tab in CDMA Workshop, clicked the drop-down menu under "SPC / User Lock" and changed it to "LG method", and then clicked "Read", itll start to attempt to read, and then in the bottom of the window in CDMA Workshop, it says "Failed..Phone does not answer".
What in the world is going on? Ive tried rebooting my PC, reinstalling the drivers, restarting CDMA Workshop, and changing the ports up but it NEVER reads my MSL!!! Do you all know whats going on? Is it becasue im running IHO BACKside CyanogenMod 7.2? Do I have to be using a Stock ROM when retrieving my MSL? I even tried the method of logging into my Virgin Mobile account, and then clicking that link (this https://www1.virginmobileusa.com/myaccount/login.dofsdf that says Error 404 not found, but the page doesnt even say a 404 Error, it says "The specified URL cannot be found".
What do i do guys???
Get MSL LG Optimus Black
I Am Not 100% sure this will work for your model but i downloaded LogCat to my PC and searched the code is under
D/InfoItems( 1572): Msl is filled as : 111221........................ hope this helps... your MSL probably isnt the same but it worked . you may have to search in the edit box for msl and just keep clicking down til u find it.
Hi,
im following Ryan Mogul's instructions for the ppc 6800 to unlock the SPC from the code to 000000 , ive gotten to the QPST add port and there is no phone listed , any ideas ?
thanks
Posted to wrong section please move to general q's mod!
Also more info , ive installed the diag cab it works flawlessly and also dialing the code on the phone gets you into diag . But when plugged into my laptop , win7 64 bit , it does not show up in qpst when i add port. On device manager it has a yellow triangle , indicating driver issue i believe ? I saw a thread days ago about using a set of drivers posted here by another user ?
Anyone ? Any help is appreciated i want this phone activated on cricket to use for wireless tethering
did you put the phone in diag mode? ##diag#
yes,
in Ryans instructions he has you install a , "Diagnostic Shortcuts cab" which gives you access directly to the application on the phone so you dont have to dial codes , same as epst , if you use the file manager you can just go to the windows directory and open epst , so i opened that and followed his instrutions to let the app start and when in diag mode the program would just hide itself , i did that and then tried to find it on QPST with the add port option and nothing shows up
epst and diag mode are different. flash back to stock and put it into diag, then write the SPC to whatever.
After a long research i decided to create this thread!
After na update my Optimus L3 got in a "No service" situation. The strange part is that i have signal and im able to acces the internet using mobile network (wifi off). After a long research i fugered out that my IMEI was 0 (zero). I finded a lot of solutions to this problem but none of then was compatible with my device or brand.
Its possible to perform this in an Optimus L3? How can i acces the Port Settings?
(ultimate solution for several LG devices)
Restoring IMEI
1. Connect phone by USB
2. Activate USB debug mode
3. Enter 3845#*920# in dialer if that doesn’t work try 3845#*925#
4. Select Port Settings -> Select CP Image Download
5. A new device should appear at let it install
6. Open Tutty and select serial protocol. Click on open
7. Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8. Type at%imei, it should display a dummy IMEI
9. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10. Reboot phone
Click to expand...
Click to collapse
sorry for my grammar!
Help these souls. LGE400 IMEI ZERO Problem
Im waiting For this **** too, i happen to have a dumb friend who did the same thing, its lame, i know, but the poor thing is almost crying cause his phone is new and he already screwed all up. so please if someone happen to have the solution for this, you would be a lovely person as to help these poor souls ^^ thanks in advance.
i`m waiting for any solution to this too. mi imei its (0) somebody help me to discover any solution
update
I got service using a 3g chip from another operator. IMEI still 0. this is so messed up
Hello,
I'm here trying to get help to solve a LG L65 D280n with the null IMEI problem.
I'm hopping there's no problem with the hardware as it was working ok and didn't fall or something else. It just got that way and it was nw unlocked some months ago.
Well, I've 1srt search and follow many youtube videos and read a lot of threads.
At 1srt I've tried to use official software form LG. LG mobile tool and drivers.
I download and install them everything goes well, phone is detected and after usb connection the firmware download started.
Problem was, after the point that it decompress the firmware and it was supposed to start copying it to the phone, the LG app just hangs with the windows error as it stops responding.
Using a machine with Win7 Pro x64.
From this saved the LG kdz file and the dll file that was downloaded.
I can't get another because the links from:
http://redirect.viglink.com/?format...g-phone-firmware.com/firmwar...-Tutti-50.html
are broken to the Europe/Portuguese version A or B of this phone that was original from MEO/TMN
Then I've tried another LG tool, older I believe. It requires qualcomm software, visual c++ etc.
All went well until I've selected a com port at the QPST configuration and then at the RF NV manager were I would try to write the IMEI it fails.
I select the COM port I've added before at the QPST configuration app but when I select the READ from phone option it just returns error ... DM command 19-24.
I was hopping to flash the modem only or to write the IMEI manually but its getting hard to solve the communication problem even after trying in different computer and with 3 version of drivers and software.
Recovery mode only shows if I wanna do factory reset, I did.
Can someone help?
Tried also EFS Professional now using Qualcomm NV tools, I can select the phone COM port but if I try to connect to it with 000000 Send SPC option on, It returns error, unable to send SPC to the phone.