Related
This is going to be simply a collection of links with important points...Please read ALL directions and comments carefully...as no one is responsible for any damage to your phone.
NOTE 1: IF YOU ARE UNROOTED AND ALREADY UPDATED WITH OTA, YOU CAN STILL USE THE PROCESSES BELOW TO ROOT AND FLASH RECOVERY.
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 2: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 3: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you want to stop the OTA update notification, use this file which provides simple edits...but be careful as it may make further updates more difficult >> SCH-I500.DI01 Update
UPDATED:
OTA Update with Root and Busybox >> DH12 to DI01 update with root and busybox
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
My path.
1) Stock with root mentioned in this dev section
2)restored CW backup
3)used CW to install the update mentioned in this thread.
No problems so far.
After reading this thread again I went to stock and stock kernel. Rooted and gold again.
I think that CPU Scale app causes the Fascinate to shut down, so if you use it and getting them.... remove the app or let me know if you fixed.
Thanks!!!
Now, here is something I didn't try yet. I am still stock (not rooted), ran the OTA...and with all people having issues, I am scared to root. I want to try but I think I will wait and see if anyone else does this.
tats_06 said:
This is going to be simply a collection of links with important points...
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 1: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 2: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you don't care about root and want to install the OTA update manually >> SCH-I500.DI01 Update
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
Click to expand...
Click to collapse
I thought the post about doing the OTA manually would allow you to keep root, seeing that it's a stripped down version.
Let me clarify that. If that's the case, I can update the OP.
Restored, updated and Rerooted
All is well. No problems so far.
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
namebrandon said:
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
Click to expand...
Click to collapse
Thanks for heads up...first post updated.
Bump.... Back to top till this gets stickied!
wasupwithuman said:
Bump.... Back to top till this gets stickied!
Click to expand...
Click to collapse
Thanks! I just reported it too to request for sticky.
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
azalvarez03 said:
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
tats_06 said:
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
Click to expand...
Click to collapse
I don't think the update blocks root. you should be able to install the OTA as long as your not rooted, then once it is installed go ahead and root your device.
Ok...looks like root went thru...working on cwm recovery now.
OK, recovery installed successfully...running a backup right now.
Should I test restoring? Or should I assume I am safe?
Rooting after OTA update.
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
If you have CWM installed, you always have root via adb, which means you can get your root apps working.
If you're not running CWM, I don't know. Someone who's tried rage.bin post-update could tell you.
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
Yes you can root after update, I did it fine, but had to attempt it twice, the first try it hung, so had to do a battery pull, and then the second time it worked fine.
Nothing in the update seems worth it to return to stock (I've removed so many stock apps already.)
I'm having the Force Close loop issue. My CWR seems to be missing, as all I can access is Android system recovery <2e> with the options of:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Using the Odin method didn't work for me, on multiple tries. My SD card appears to be wiped clean and I can't enter debug mode.
Is there anything short of a miracle that I can do to fix my phone? I've seen a few posts with people saying they had similar problems as mine, but there was never and explanation of how or if they fixed there phone.
Thanks in advance
Hello. I have done quite a bit of searching, just can't find a similar enough post to tag on some questions. Sorry if this has been asked...but I did look over a month of posts, and google searching.
I have a Note 3 from September, rooted in October...not sure how I got it done...but I jumped the gun and unrooted it with SU thinking I would be able to OTA to 4.4.2. Nope!
So, I am stuck on 4.3.
My big question is how can I get to 4.4.2 with OUT starting over on the phone.
I guess this is a backup question. I have some settings turned on that indicate that a back up is going somewhere, but I can't confirm, and I don't know what all is backed up.
Pictures are backed up, but I would hate to lose them. They are on SD card anyway...so I realize I could take the card out, but something I read suggested I might lose even the micro-simm card contents. Not sure how that would be possible.
But what about things like Quick Notes, and S Note, and Contacts, and all of my apps that I have installed, and settings for those apps.
When I rooted back in October, it worked with out disrupting anything.
How can I get that to happen now WITH an upgrade to 4.4.2 AND getting it rerooted?
If I can't upgrade with out wiping it clean, I am probably going to stay put. So, then what is the best way to root to get "Wifi Tether Router" back working...as it is the only thing I need the phone rooted for.
Finally, what is the difference between NC5 and NC5D. I saw a recent post of somebody else asking it...but none of the replies gave an answer.
Thanks for any feedback.
I don't know if this will help, but you can give it a try. First, you might want to consider that you are where most of us are trying to get back to ( i.e. 4.3 with no KNOX !!! ). Ok, I would go to Samsung Firmware, and download the latest version of 4.4.2 NC5 to your PC. I would backup that copy of 4.3 on your device to your sdcard then if have an ext sdcard copy it there, or copy that backup to your pc. Most of your Pics and data should be in that backup, that you can copy back later with a file explorer like Root Explorer. Now do a factory wipe. Then take the NC5 zip you got from sammie and extract it to a file on your desktop this will change it to a .tar file. Find a copy of Odin v1.85 don't use the 3.09 version on the Samsung website if possible. Cool, reboot your device into download mode, start odin, plug in your device to your PC. Now, load that extracted file on your desktop into PDA odin, and click start. It will take minute to read Md5 then start installing. You will lose root and recovery !!! Your new bootloader will have KNOX 0x0. So, you will have to start over with the root process, but isn't that half the FUN !!! Chainfires v1.94 supersu will root NC5. As for the difference between NC5 and NC5D, It is my understanding they are the same. The D stands for a version of NC5 that was used by Samsung employees ( i.e. programmers and developers ) in the development of NC5. :fingers-crossed::fingers-crossed:
Lokerd, I see you have read my response. Great!!! I would add the you can root 4.4.2 NC5 several ways. As I said above Chainfires v1.94 SuperSu, and One click autoroot, and Towelroot for 4.4.2. All should root your device without tripping KNOX. However, as soon as you flash a new custom recovery like TWRP or Philz CWM ( my favorite ) it will trip KNOX. If you are out of warranty no biggie, besides you need a custom recovery if you want to get back to your 4.3 backup. ( By the way remember you need the same recovery (i.e. TWRP or CWM ) that you made the 4.3 backup with, now on NC5 just a newer version. This will make it easier to recover the 4.3 backup later. They say the most popular recoveries will recover each others backups, but that is rarely the case.
jimzweb1 said:
First, you might want to consider that you are where most of us are trying to get back to ( i.e. 4.3 with no KNOX !!! ).
Click to expand...
Click to collapse
Thanks for taking the time to reply! And to reply with such a nice well though out steps.
So...I should NOT being trying to upgrade? I can do that...just reroot and be done with this. I really don't want to risk having to lose info I have put on the phone, etc. A few new features is not going to be worth it. But, reading about improved 4g and wifi performance. Wifi calling is not important to me. But it would be nice to have the camera on the lock screen...but I bet I could find something that would do that the rooted phone I had.
So, let me ask this. If I do not care about KNOX, is the process you outlined above any easier?
Thanks!
Drew
lokerd said:
Thanks for taking the time to reply! And to reply with such a nice well though out steps.
So...I should NOT being trying to upgrade? I can do that...just reroot and be done with this. I really don't want to risk having to lose info I have put on the phone, etc. A few new features is not going to be worth it. But, reading about improved 4g and wifi performance. Wifi calling is not important to me. But it would be nice to have the camera on the lock screen...but I bet I could find something that would do that the rooted phone I had.
So, let me ask this. If I do not care about KNOX, is the process you outlined above any easier?
Thanks!
Drew
Click to expand...
Click to collapse
Well, if you are out of warranty, and you don't care about KNOX go ahead and upgrade. But, consider this: One, so where clear the only reason for the 4.3 backup is to get to your pics and data at a later time. Here is a link about trying to go back http://forum.xda-developers.com/showthread.php?t=2630514 Once you install 4.4.2 NC5 ( this will include a new kernel, bootloader, baseband, and OS ) you CANNOT go to back to 4.3. If you try to install the 4.3 backup after you have upgraded to NC5 you will soft brick your phone. Then, there's KNOX what is KNOX, KNOX is security software written by the NSA for Samsung. Now I'm not saying its spyware, but Samsung is !!! You can go to Samsung's website and all the info about KNOX you need is there.
To answer your last question, no. You have to go through all the motions.
If it was me, knowing what I know now. I would stay at 4.3, install an engineering bootloader (read up on bootloaders they are not forgiving if you mess up ) then try to upgrade basebands. Here is a link for NAB engineering bootloader which should be 4.3, http://forum.xda-developers.com/showthread.php?t=2655674 Here is the link for a NC5 baseband, http://forum.xda-developers.com/showthread.php?t=2701837 I believe this will improve your 4G lte.
Last, what I'm running. I run Note 3 "Sprint" 4.4.2 NC5 ( no choice bought the device new with that OS, voided my warranty the second day I owned it ). Rooted with Philz CWM recovery ( hltespr v 6.12.9 ) KNOX disabled and removed. I definitely like 4.4.2 NC5 a lot better than 4.3 my daughters Note 3 had 4.3 before I upgraded to 4.4.2 and rooted it. Here is my XDA website http://forum.xda-developers.com/showthread.php?t=2770729 so if you do upgrade this is a good place to start.
Ok. Sorry for more noob questions.
Ok, the only thing I want to ensure is that I don't lose things like S Note, Action Memo, Contacts, Pictures, apps installed. I just don't want to redo everything. Basically, I just want to upgrade the operating system and have everything up and running like it was...just new OS. Is that possible? I understand what you are saying about not being able to use the back up. I guess I just don't understand if I can upgrade this phone with out having to start back over with everything.
I am not out of warranty (purchased October 2013), but I don't see that it would be a problem. I normally don't break or drop my phone...although I did drop it and picked up a nick a few weeks ago. It was unusual circumstances. Point is...I guess I will worry about warranty issues if that comes up. On the other hand, the home button is a getting a little finicky, so I avoid it...using swipe down, and a notification toggle to go to Home whenever possible.
I don't understand the difference between bootloader vs. flashing vs. upgrading basebands vs. rooting as opposed to those other things. it doesn't help that there are multiple ways to do each of the above.
I think I am in over myhead.
Can you help me figure out what I had done before...as it was working pretty good. I Rooted it to get root access, but not sure how I did it. It was easy, and it didn't erase anything. I think I simply used Odin. Attached is a screenshot of a folder of stuff that I might have used. Can you tell what root method I used?
I think I am just going to go back to what I had...and still with 4.3. I actually looked at my wife's identical phone that is on 4.4.2 and other than wifi calling, I don't see the camera on lock screen, so I don't really think I should be messing with stuff I can't wrap my mind around trying to get to 4.4.2.
lokerd said:
Ok. Sorry for more noob questions.
Ok, the only thing I want to ensure is that I don't lose things like S Note, Action Memo, Contacts, Pictures, apps installed. I just don't want to redo everything. Basically, I just want to upgrade the operating system and have everything up and running like it was...just new OS. Is that possible? I understand what you are saying about not being able to use the back up. I guess I just don't understand if I can upgrade this phone with out having to start back over with everything.
I am not out of warranty (purchased October 2013), but I don't see that it would be a problem. I normally don't break or drop my phone...although I did drop it and picked up a nick a few weeks ago. It was unusual circumstances. Point is...I guess I will worry about warranty issues if that comes up. On the other hand, the home button is a getting a little finicky, so I avoid it...using swipe down, and a notification toggle to go to Home whenever possible.
I don't understand the difference between bootloader vs. flashing vs. upgrading basebands vs. rooting as opposed to those other things. it doesn't help that there are multiple ways to do each of the above.
I think I am in over myhead.
Can you help me figure out what I had done before...as it was working pretty good. I Rooted it to get root access, but not sure how I did it. It was easy, and it didn't erase anything. I think I simply used Odin. Attached is a screenshot of a folder of stuff that I might have used. Can you tell what root method I used?
I think I am just going to go back to what I had...and still with 4.3. I actually looked at my wife's identical phone that is on 4.4.2 and other than wifi calling, I don't see the camera on lock screen, so I don't really think I should be messing with stuff I can't wrap my mind around trying to get to 4.4.2.
Click to expand...
Click to collapse
Cool, your version of 4.3 should be NAB and no KNOX. If this is the case then you should be able to root, and return back to stock, if you have say a hardware issue with your device and have to return it under warranty. So, according to your last post image on 10/24/2013 you used CF Autoroot, if you want to read up here is the link to that http://forum.xda-developers.com/showthread.php?t=2466423
Now to get to the latest version of CF Autoroot you need to go to ChainFires ( CF ) repository here is the link http://autoroot.chainfire.eu/ just find the model of your phone and click on File to download. Put that file on your desktop, now go to your android downloads copy and paste Odin v1.85 to your desktop. Click on Odin extract, and open it, now click on PDA a box will open, now select desktop and click on CF Auotroot. It should come up in Odin next to PDA. Now boot your device into download mode, then connect to your PC. In the upper left hand box will light up COMM: with some number in green, blue, or yellow doesn't matter just telling you that a connection was made. Now click start on the bottom of Odin, sit back and watch the magic!
When it says pass your done. Now reboot your phone if doesn't do it by itself go to your app drawer and see if SuperSu is there. To install the Recovery just follow the same steps just substitute the recovery .tar file in place of CF Autroot. I see you have ChainFires v1.65 SuperSu the latest version is v2.01 here is the link http://forum.xda-developers.com/showthread.php?t=1538053. If you use CF Autoroot it will probably install the latest version of SuperSu automatically.
I see on 10/25/2013 you downloaded CWM recovery for hltespr ( sprint ) here is the link for Philz CWM http://forum.xda-developers.com/showthread.php?t=2596001 the latest version for sprint is 6.12.9 I don't use his unified all in one recovery version, I use the sprint version, but the choice is yours. :fingers-crossed:
jimzweb1 said:
Cool, your version of 4.3 should be NAB and no KNOX.
Odin v1.85 to your desktop.
Click to expand...
Click to collapse
Thanks for the continued help. Just about ready to reroot the thing.
So, you mention using 1.85...is that only because that is what I have? The latest CF-Auto-Root came with 3.07 but I had already downloaded 3.09 a couple of days ago trying to figure stuff out. I also saw a warning about using the latest Odin...but I think it applied to trying to do the Kindle Fire, which I determined was 3.3 and not able to be rooted with out a special cable, which I have ordered.
Anyway, does it matter if I use the 3.07 that came with the latest version of CF-A-R? Should I use 3.09? Or def stick with 1.85.
EDIT #5: I end up using 1.85 and the original Root, then the new ROOT. So, does it matter that I used the Root from October vs the newest one or older Odin vs. newer? I have it up now, so it is just a matter of tryingt o figure this out.
BTW, I thought I had bricked my phone...went back and read YOUR instruction again, and got it restarted. The instructions on the main CF-A-R thread do not make it very clear.
Thanks a bundle!
Great !!! It doesn't matter which version of Odin you use, as long as it gets the job done. As for CF Autoroot, after your done rooting and boot the device back up. It my take awhile but you will automatically be asked update your apps, and SuperSu will update binarys at that time.
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.
As many of you Verizon S4 owners are aware, Verizon recently provided a two-part update, to update our phone to Lollipop. The first one simply updates the firmware from NK1 to NK4, and the second part updates it to Lollipop. Many of us, myself included, did NOT want to apply these updates, but mistakenly pressed the button to install the first update, to NK4. [It's pretty easy to avoid the second part since it requires loads of space to be cleared on your device before it can be installed.]
Sadly, when the phone updated from NK1 to NK4, we lost our root. Well, be sad no more! Thanks to my research & testing, I have put together a solution. I have done this on my phone and experienced no issues for the last 2-3 days.
These steps are similar to the steps for rooting NK1 - first flash NC5 through Odin, root using towelroot, and then re-flash NK4. I have seen many posts asking about the NK4 stock kernel, and no one seems to have it, even the sammobile site. Well, I got my hands on the Verizon update.zip for NK4, extracted the boot.img, and then turned it into a tar.md5 file that can be flashed via Odin.
So, here are the steps:
1. Go to this post and get your hands on the Towelroot apk, NC5 stock kernel, and Odin.
2. Download the NK4 stock kernel attached to this post (I had to zip it, to comply with the forum posting rules, so please unzip it)
3. Install Towelroot on your phone.
4. Shut down your phone, then boot your phone into "Download Mode" (press and hold the Home, Volume Down, and Power keys until the phone powers on and displays warning screen, then press Volume Up key) and Flash the I545_NC5_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
5. Once your phone reboots, open Towelroot from your app drawer and press "Make it Rain" to root your device. Note that at this point, your phone may be acting funny because of the flash of NC5. Don't worry, it will be fine once we flash back NK4. For now, just get Towelroot to root the phone. If it says it worked, then shut down the phone. [In my case, Towelroot said it worked, but the Root Checker app I had said I did not have root, so don't trust those, if Towelroot says it worked, it worked!]
6. Boot into Download Mode again, and this time flash the I545_NK4_Stock_Kernel in Odin. Once your phone reboots, you should have root!
7. Download SuperSU from the Play Store to manage root access. Done!
If you are unfamiliar with Odin and like a guide with pictures, there is a giude written for the original NC5->NK1 rooting, so you can follow that here, but remember that the second flash should be NK4, not NK1 that it says in that guide.
Ok, this is my first post here, so be gentle. I hope this helps everyone having the same issue as I did. I am so excited to finally be contributing to the xda site, after so many years of using it to root my various Android phones over the years!
Please Note: As mentioned in other threads on this site, you should NOT try to flash NC5 if you have already updated to OC1 (Lollipop).
You're my hero!
I'm working on one of these for a customer. The phone in question belongs to his wife, who is cheating on him. I needed root access so I could run Dr. Fone for Android and scan for deleted text messages, but couldn't afford to lose any of the existing data. Your method worked on I'm scanning the phone now. Thanks a million!
Thanks shmod, it worked for me as well, however it took multiiple tries because it would keep rebooting on itself, quite rapidly, so I had to move quick. Also, i had a previous version of towel root installed and somehow it was showing as installed apps but it was not in the apps menu, so I had to uninstall it and then reinstall to get it to work, it was a bit odd.
one question when i put my phone into download mode and i connect the usb cable i get no response on the pc. in odin i get no blue light at all and im on nk4 and with usb debugging on. any help would be lovely. please and thank you.
Hello! Sorry for my panic and sense of urgency, but I'm currently away for school and my lease is ending at the end of the month and I have no way to contact my parents, real estate agents, movers, or anything now. All I have is my phone and computer, and I haven't renewed my internet for the month so it should be shut off any day now as well.
But I was running Lollipop (OC1) and rooted my phone the other day with the terrible KingRoot. I attempted to use this app that was supposed to remove KingRoot and replace it with SuperUser but it only removed KingRoot - nothing else. So I lost root access, but still had all the KingRoot crap on my phone. Today a Verizon update appeared on my phone and I clicked install - I didn't think anything of it because it wasn't a major OS upgrade, just a small patch. Plus I thought it'd help remove KingRoot. Uh oh. I was wrong.
I installed the update, it went into recovery and then attempted to install. next thing I know all I see is a black screen. I tried pulling the battery and rebooting it, but I can't get passed the Samsung logo - it just goes to a black screen (but I believe it's still on, draining battery). If I try to boot into recovery it INSTANTLY starts auto-installing this update, which it of course always fails to do and gives me an error message.
My brother said I need to use 'ADB' but he's busy and can't email me much more information. I'm entirely lost, panicked, and scared! I need my phone working soon. I'm assuming theres no way to 'fix' my phone - so I'm just going to have to suck it up and realize I lost everything (man I wish I saved a lot of people I was texting as contacts *face palm*). What can I do now?
P.S. If I need to install a new ROM or whatnot over this, then can I do so with a pre-rooted Lollipop ROM? That way I don't have to risk using KingRoot ever- ever again. NOTE I NEED ROOT FOR WiFi TETHER! My internet is being shut off very soon, so to get by in the meantime I planned on using my phone and its tether.
No... You need internet access..
BUT... If you backed up everything to the external SD, then you can regain contacts..
Otherwise, Any attempt to fix it won't do anything...
ADB won't work on this phone either...
What you need to do is download a program called Odin, and a OC1 stock tar... That will recover your phone, but you will lose all contacts unless you had the Verizon contact thing...
I had the exact same experience as you yesterday... I had to put my phone in Download mode and start fresh with the Verizon Software Update Assistant. All I really cared about was my pictures, and they were on the external SD card. The other response about using ODIN to go back to OC1 works just as well... Best of luck!
Odin is your friend
Don't panic. You're contacts and other media of a similar nature are usually backed up regularly enough if you don't mess with the default sync settings of your stock rom. We can all agree Kingroot is a terrible way to root because of it's unnecessarily bloated bundle that it installs along with its super user app. To get your phone working you need to 'Odin' back to stock and from there you can root and install a custom rom. However your choices are very finite because of the new SELinux enforcing files on the OC1 build for the Verizon bootloader.
Step 1) Download Odin here ---> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Step 2) Download the stock OC1 Build ROM for the SCH-I545 (Verizon Galaxy S4) here ---> http://forum.xda-developers.com/galaxy-s4-verizon/development/odin-5-0-1-lollipop-oc1-t3174850
Step 3) Once the download has finished (use DownloadThemAll add-on in FireFox to boost download speed) load the tar.md5 file into Odin
using the AP button.
Step 4) Put your phone into download mode and plug it into your computer. Make sure the cables aren't loose and click start in Odin.
Step 5) Wait for the phone to reboot and for the com-slot in Odin to turn green (will say "PASS!!" when complete).
If you use KingRoot to root the phone then I suggest googling how to replace KingRoot with SuperSu and following the tutorial W0lfdroids website here ---> http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html