I've had Safestrap on my wife's XT912 for a long time and I haven't touched her phone for a few years. The Safestrap version on her phone is 3.11. I need to turn off Safestrap so I can boot the phone into BPTools mode. Unfortunately, Safestrap is no longer installed on her phone's stock slot (not sure why...) I've looked everywhere for the original apk but can't find it anywhere.
Does anyone know of a mirror of older Safestrap versions, specifically 3.11? Or can someone please post the Safestrap Spyder v3.11 apk?
Thanks!
micahs said:
I've had Safestrap on my wife's XT912 for a long time and I haven't touched her phone for a few years. The Safestrap version on her phone is 3.11. I need to turn off Safestrap so I can boot the phone into BPTools mode. Unfortunately, Safestrap is no longer installed on her phone's stock slot (not sure why...) I've looked everywhere for the original apk but can't find it anywhere.
Does anyone know of a mirror of older Safestrap versions, specifically 3.11? Or can someone please post the Safestrap Spyder v3.11 apk?
Thanks!
Click to expand...
Click to collapse
I have the 3.11 apk , I guess I can upload it if you really need it
Guapo613 said:
I have the 3.11 apk , I guess I can upload it if you really need it
Click to expand...
Click to collapse
I would really appreciate it! Thanks!
I did end up finding a version that I initially thought wasn't compatible but turned out to be compatible. I found "Safestrap-RAZR-D4-BIO-3.11.apk" on an old how-to site and after doing a bunch more reading and seeing dead links with the same name in threads related to my phone, I realized that it would work after all. Finally, the phone is on 3.75 and I can enable and disable at will.
@Guapo613 Thanks for the offer, but I'm good now! (Hope you didn't go to any trouble - I didn't reply til after work!)
micahs said:
I did end up finding a version that I initially thought wasn't compatible but turned out to be compatible. I found "Safestrap-RAZR-D4-BIO-3.11.apk" on an old how-to site and after doing a bunch more reading and seeing dead links with the same name in threads related to my phone, I realized that it would work after all. Finally, the phone is on 3.75 and I can enable and disable at will.
@Guapo613 Thanks for the offer, but I'm good now! (Hope you didn't go to any trouble - I didn't reply til after work!)
Click to expand...
Click to collapse
could you post the link? thanks
Sent from my KFFOWI using Tapatalk
sd_shadow said:
could you post the link? thanks
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
This is where I downloaded it: http://droidrazrroot.com/droid-razr-hacks/safestrap-v3-0-for-droid-razr/
HTH
micahs said:
This is where I downloaded it: http://droidrazrroot.com/droid-razr-hacks/safestrap-v3-0-for-droid-razr/
HTH
Click to expand...
Click to collapse
thanks added it to my safestrap thread
http://forum.xda-developers.com/showthread.php?p=62388266
Sent from my XT1060 using Tapatalk
micahs said:
I did end up finding a version that I initially thought wasn't compatible but turned out to be compatible. I found "Safestrap-RAZR-D4-BIO-3.11.apk" on an old how-to site and after doing a bunch more reading and seeing dead links with the same name in threads related to my phone, I realized that it would work after all. Finally, the phone is on 3.75 and I can enable and disable at will.
@Guapo613 Thanks for the offer, but I'm good now! (Hope you didn't go to any trouble - I didn't reply til after work!)
Click to expand...
Click to collapse
Glad you found it. I have a couple of versions of Safestrap if you need those. Just let me know
Guapo613 said:
Glad you found it. I have a couple of versions of Safestrap if you need those. Just let me know
Click to expand...
Click to collapse
I don't personally need them, but if you could please post them for posterity that would be great. Thanks!
Related
I have some issues going on with my phone since rooting. I use matt's utility 1.82 and seems like i have tons of issues with trying roms. Every rom i try has the same issue. Wifi doesnt stay connected and i cant get my cpu speeds to set.
So I have seen in other forums other ways to root your razr. Which root methods does everyone like best and have the best/most success with?
Thanks for the help guys.
do you have a gsm or CDMA version?
Full-Throttle Team
moderator at bdhroms.freeforums.org
prsterero said:
do you have a gsm or CDMA version?
Full-Throttle Team
moderator at bdhroms.freeforums.org
Click to expand...
Click to collapse
I have CDMA (Verizon XT912)
brex2040 said:
So I have seen in other forums other ways to root your razr. Which root methods does everyone like best and have the best/most success with?
Click to expand...
Click to collapse
I would recommend you EasyRootICS, worked everytime for me without issues and takes only 1-2 minutes!
You can find it in the developer forum, just use the search function!
Motofail never gave me a problem
Enviado desde mi XT910 usando Tapatalk 2
Lokimitsu said:
I would recommend you EasyRootICS, worked everytime for me without issues and takes only 1-2 minutes!
You can find it in the developer forum, just use the search function!
Click to expand...
Click to collapse
So i used EasyRootICS and it seemed to work fine, but i still have the issue where my WiFi wont stay connnected or if i leave the area where my wifi is, it wont connect back up. I have to reboot the phone to connect again. Doesnt matter what ROM i am using, they all do the same thing.
Ever user EasyRootICS successfully
brex2040 said:
So i used EasyRootICS and it seemed to work fine, but i still have the issue where my WiFi wont stay connnected or if i leave the area where my wifi is, it wont connect back up. I have to reboot the phone to connect again. Doesnt matter what ROM i am using, they all do the same thing.
Click to expand...
Click to collapse
I often noticed that issue, too...
Which ROMs did you test so far?
I used Matt Goff's 1.82 utility no problems
I have tried using Wizzed Bean, Red Tide, and Full Throttle. I am currently running Wizzed Bean and everytime i restart my phone. all my setting reset. i have re installed the rom, wiped cache/delvik still same issues. I might just go back to stock ICS and wait out for Official JB.
Seriously, try Matt's 1.82, Safestrap 3.05, and the CM10 spyder. Running great for me, not going back to the bloat, secret data recording, and delayed updates.
Sent from my XT912 using xda app-developers app
rhizomaticon said:
Seriously, try Matt's 1.82, Safestrap 3.05, and the CM10 spyder. Running great for me, not going back to the bloat, secret data recording, and delayed updates.
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
Can't seem to find that one. Can you post link please. Thanks for info.
brex2040 said:
Can't seem to find that one. Can you post link please. Thanks for info.
Click to expand...
Click to collapse
Sorry to take so long to answer-- need to get push notifications for this going or something.
I started with this thread:
http://forum.xda-developers.com/showthread.php?t=1927747
But some of the information in that thread is out of date- so make sure you read the latest posts. Also, with Safestrap, I am not sure you have to root your stock install, but I did at the beginning just because I thought I had to before understanding the whole process. Also, Matt's is not the only way to root. So my sequence went something like this:
Rooted with Matt's 1.82 utility:
http://www.droidrzr.com/index.php/t...-182-windows-for-verizon-droid-razrmaxx-only/
Again, this is getting out of date. I did not install the Safestrap 2.X from here. Instead, I found the latest Safestrap with instructions here:
http://blog.hash-of-codes.com/how-to-safestrap/
Finally, you can get the latest CM10 spyder builds by Hashcode here:
http://goo.im/devs/Hashcode/spyder/cm10
I am currently running the Nov. 1 version, but I see there's a Nov. 10 now. Now to figure out how to upgrade without blowing it all away!
YMMV, HTH, yada yada
Lokimitsu said:
I would recommend you EasyRootICS, worked everytime for me without issues and takes only 1-2 minutes!
You can find it in the developer forum, just use the search function!
Click to expand...
Click to collapse
Agreed.
Used this method on my razr. Flawless.
Forgot how much fun a rooted phone is.
Sent from my DROID RAZR using xda premium
rhizomaticon said:
I used Matt Goff's 1.82 utility no problems
Click to expand...
Click to collapse
Matt's worked great for me as well
XT912 Running Android 4.1.2 (stock, rooted). I've installed SS 3.12 and the installation went fine. However, when I turn my phone off and back on, I never see SS! Am I missing something?
Thanks
SS 3.12 ? where you found it ?
monkteo said:
SS 3.12 ? where you found it ?
Click to expand...
Click to collapse
There: http://forum.xda-developers.com/showthread.php?t=1995220
I actually found it in a RAZR thread when rom searching. Any idea as to why it's not working?
wesf90 said:
I actually found it in a RAZR thread when rom searching. Any idea as to why it's not working?
Click to expand...
Click to collapse
Because 3.12 is for Razr HD and not the XT912 razr
That makes sense then. I'm going to look for the thread where I got this from and let the other users know the same thing.
Thanks
Wait...
i saw this thread and i was like there was no way that this version was out lol
Has anyone tried CWM on Verizon gs4 MK2 yet?
Looks like Cyanogen may be claiming a nightly mod ready at this link - http://wccftech.com/install-cm11-nightly-android-4-4-on-verizon-galaxy-s4/
I'm currently rooted and have safestrap recovery (thanks Hashcode!).
Would like to load this mod but want to know if anyone has done this with safestrap in a ROM slot yet. Or if CWM is required and if it works with VRUEMK2.
Looking for a good step by step as still very much a noob.
Thanks
cpiercew said:
Has anyone tried CWM on Verizon gs4 MK2 yet?
Looks like Cyanogen may be claiming a nightly mod ready at this link - http://wccftech.com/install-cm11-nightly-android-4-4-on-verizon-galaxy-s4/
I'm currently rooted and have safestrap recovery (thanks Hashcode!).
Would like to load this mod but want to know if anyone has done this with safestrap in a ROM slot yet. Or if CWM is required and if it works with VRUEMK2.
Looking for a good step by step as still very much a noob.
Thanks
Click to expand...
Click to collapse
You got a lot of reading to do lol you can't run CM with MK2.
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
if your on mk2 then its pretty much just safestrap and hyperdrive for now.
Thanks, I'll start there. I
Sent from my SCH-I545 using xda app-developers app
joshm.1219 said:
You got a lot of reading to do lol you can't run CM with MK2.
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
i see in your signature that youre running hyperdrive on mk2... where did you download your kernal module?
This (http://forum.xda-developers.com/showthread.php?t=2441441) says its not available yet.
Edit: never mind I've got it
sk8rboy1491 said:
i see in your signature that youre running hyperdrive on mk2... where did you download your kernal module?
This (http://forum.xda-developers.com/showthread.php?t=2441441) says its not available yet.
Edit: never mind I've got it
Click to expand...
Click to collapse
My modem is MK2, my bootloader is MDK.
cpiercew said:
Has anyone tried CWM on Verizon gs4 MK2 yet?
Looks like Cyanogen may be claiming a nightly mod ready at this link - http://wccftech.com/install-cm11-nightly-android-4-4-on-verizon-galaxy-s4/
I'm currently rooted and have safestrap recovery (thanks Hashcode!).
Would like to load this mod but want to know if anyone has done this with safestrap in a ROM slot yet. Or if CWM is required and if it works with VRUEMK2.
Looking for a good step by step as still very much a noob.
Thanks
Click to expand...
Click to collapse
please take some time and read some threads in this forum.....this question has been asked countless times and been answered countless times. There is no custom recovery available for users with phones above mdk base and the only option is safestrap
no CM or ASOP based ROMS will run with safestrap
powerram50 said:
if your on mk2 then its pretty much just safestrap and hyperdrive for now.
Click to expand...
Click to collapse
What version of HyperDrive? I tried 12 but after the aroma setup and reboot it just hangs.
Caprice_0083 said:
What version of HyperDrive? I tried 12 but after the aroma setup and reboot it just hangs.
Click to expand...
Click to collapse
you have a good download by checking MD5?
decaturbob said:
you have a good download by checking MD5?
Click to expand...
Click to collapse
I tried the MD5 verification upon install and it fails, only goes through when you uncheck it. I kind of thought the verification could be the problem. Do you have a link or website I can get HD 12 with a valid MD5 file?
Caprice_0083 said:
I tried the MD5 verification upon install and it fails, only goes through when you uncheck it. I kind of thought the verification could be the problem. Do you have a link or website I can get HD 12 with a valid MD5 file?
Click to expand...
Click to collapse
Not tied to install...The md5 needs to be checked on the downloaded file...downloading can corrupt large files and u need to run a md5 checker on it. The md5 checksum is posted at the file hosting site u dloaded from.
Sent from my SCH-I545 using XDA Premium 4 mobile app
decaturbob said:
Not tied to install...The md5 needs to be checked on the downloaded file...downloading can corrupt large files and u need to run a md5 checker on it. The md5 checksum is posted at the file hosting site u dloaded from.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, done. It says that the codes don't match.
Caprice_0083 said:
Ok, done. It says that the codes don't match.
Click to expand...
Click to collapse
Redownload until you get a good file.
Sent from my SCH-I545 using XDA Premium 4 mobile app
decaturbob said:
Redownload until you get a good file.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Got a good one, installed and works like a charm, thanks!
Caprice_0083 said:
Got a good one, installed and works like a charm, thanks!
Click to expand...
Click to collapse
most bad installs related to a bad download.
Roms for MK2 on SS 3.71
Can someone post me a list of Roms for MK2 on SS 3.71
gteknet said:
Can someone post me a list of Roms for MK2 on SS 3.71
Click to expand...
Click to collapse
Google.com
Sent from my SCH-I545 using Tapatalk
Theres even a sticky on here listing alllllll that info.... pretty easy to find
Sent From My Verizon S4
Mistertac said:
Theres even a sticky on here listing alllllll that info.... pretty easy to find
Sent From My Verizon S4
Click to expand...
Click to collapse
and yet you're too senior to post it. this forum has gone downhill; you and the preceding replies are why people don't like posting. were you picked last for dodgeball as a child and now need to vent your hipster counter-cultural angst?
empereurcrunch said:
and yet you're too senior to post it. this forum has gone downhill; you and the preceding replies are why people don't like posting. were you picked last for dodgeball as a child and now need to vent your hipster counter-cultural angst?
Click to expand...
Click to collapse
I think it's that they're tired of people posting here expecting to be spoon fed everything, when a little time reading the stickies on this forum will answer almost every question that's asked every day
Sent from my NCC 1701 using Tapatalk 4
Recently flashed the RLS12 Safestrap rom for my GS4, Verizon on MK2. The flashing and install seemed to go smoothly, wiped etc with no problems. Ran through the aroma installer, again, no issues. Flashed the MK2 verizon modules and rebooted. The bios boot sequence came up (pretty sweet BTW) and all seems fine. However, it stops at "Beginning Android Boot sequence" and won't go any further. I've heard rumors of this first boot taking upwards of 10 minutes, but I've tried this 3 times now and let it sit for as long as 35 minutes without any results.
Any suggestions would be greatly appreciated!!
Thanks!
Upperf1re said:
Recently flashed the RLS12 Safestrap rom for my GS4, Verizon on MK2. The flashing and install seemed to go smoothly, wiped etc with no problems. Ran through the aroma installer, again, no issues. Flashed the MK2 verizon modules and rebooted. The bios boot sequence came up (pretty sweet BTW) and all seems fine. However, it stops at "Beginning Android Boot sequence" and won't go any further. I've heard rumors of this first boot taking upwards of 10 minutes, but I've tried this 3 times now and let it sit for as long as 35 minutes without any results.
Any suggestions would be greatly appreciated!!
Thanks!
Click to expand...
Click to collapse
Im having the same issue and I even flashed MJ7 and tried to flash it too. I don't even get to the boot screen I have a black screen but a flawless install up to the reboot. I have flashed plenty of hyperdrive with the correct modules I even tried different versions of hyperdrive. The OP stated compatibility with everything up too MJ7 that's why I went back to MJ7 still no joy when I as originally on MK2.
Sent from my Nexus 5 using Tapatalk
Are you sure you had good file downloads?
safestrap enabled, Hyperdrive driven
decaturbob said:
Are you sure you had good file downloads?
safestrap enabled, Hyperdrive driven
Click to expand...
Click to collapse
Double sure!
Sent from my Nexus 5 using Tapatalk
MJHawaii said:
Double sure!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I would suggest deleting rom slot 1 that you installed it in (assuming) and starting over. This has been reported as helping a bad install.
Triple Sure!
MJHawaii said:
Double sure!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Confirmed.
MJHawaii said:
Double sure!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Did you download the Safestrap specific Rom? There are 2 separate downloads.
Edit: Never mind. Re-read the original post and saw that you did.
Upperf1re said:
Recently flashed the RLS12 Safestrap rom for my GS4, Verizon on MK2. The flashing and install seemed to go smoothly, wiped etc with no problems. Ran through the aroma installer, again, no issues. Flashed the MK2 verizon modules and rebooted. The bios boot sequence came up (pretty sweet BTW) and all seems fine. However, it stops at "Beginning Android Boot sequence" and won't go any further. I've heard rumors of this first boot taking upwards of 10 minutes, but I've tried this 3 times now and let it sit for as long as 35 minutes without any results.
Any suggestions would be greatly appreciated!!
Thanks!
Click to expand...
Click to collapse
I had that problem and I got fixed by downloading the right file.
You need to download the RLS12 Safestrap Rom not the regular RLS12.
The regular one is for MDK TWRP recovery rom so it doesn't boot.
qudwis said:
I had that problem and I got fixed by downloading the right file.
You need to download the RLS12 Safestrap Rom not the regular RLS12.
The regular one is for MDK TWRP recovery rom so it doesn't boot.
Click to expand...
Click to collapse
Read the post above yours.
decaturbob said:
I would suggest deleting rom slot 1 that you installed it in (assuming) and starting over. This has been reported as helping a bad install.
Click to expand...
Click to collapse
I deleted the ROM slot as suggested, and re-flashed. It worked!!! Thanks a bunch!!
riker147 said:
Read the post above yours.
Click to expand...
Click to collapse
Just making sure since that's how I fixed my problem.
Unless some help, don't reply just to make a point.
qudwis said:
Just making sure since that's how I fixed my problem.
Unless some help, don't reply just to make a point.
Click to expand...
Click to collapse
:crying::crying::crying::crying:
Same Issue
Upperf1re said:
I deleted the ROM slot as suggested, and re-flashed. It worked!!! Thanks a bunch!!
Click to expand...
Click to collapse
How did you delete it and reflash? I have the exact same issue, and I can't do anything on my phone. I can access the stock boot screen but everything that I have tried there doesn't work. I can also access "Download" mode and thought maybe I should flash again using Odin?? I dunno.....
BC
RollTide2626 said:
How did you delete it and reflash? I have the exact same issue, and I can't do anything on my phone. I can access the stock boot screen but everything that I have tried there doesn't work. I can also access "Download" mode and thought maybe I should flash again using Odin?? I dunno.....
BC
Click to expand...
Click to collapse
You delete ROM slots from within SafeStrap. Just activate your stock slot, then go over to whatever slots you have and I usually formatted and then deleted them. Fairly simple. Then try creating a new ROM slot and reflash the ROM and modules.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You delete ROM slots from within SafeStrap. Just activate your stock slot, then go over to whatever slots you have and I usually formatted and then deleted them. Fairly simple. Then try creating a new ROM slot and reflash the ROM and modules.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I'll give it a try. I'm about to "SafeStrap" this thing to a cement block and throw it into the lake I'll follow up and let you know if it works.
Thanks.
BC
RollTide2626 said:
I'll give it a try. I'm about to "SafeStrap" this thing to a cement block and throw it into the lake I'll follow up and let you know if it works.
Thanks.
BC
Click to expand...
Click to collapse
Lol
Well once you get the hang of it , its fairly easy to use SafeStrap. And unless you mess with the stock slot, its really "Safe"
Good luck let me know
Sent from my SCH-I545 using Tapatalk
99485553 1451
Mistertac said:
Lol
Well once you get the hang of it , its fairly easy to use SafeStrap. And unless you mess with the stock slot, its really "Safe"
Good luck let me know
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
UPDATE: Hey buddy - I got it fixed yesterday. It's amazing how much you learn by making mistakes. My first mistake was, as mentioned in an earlier post, I got trigger happy and flashed to my stock rom slot instead of setting up a custom slot (stupid me). Looking back, I can't believe I did that. My second mistake was trying to reflash the incorrect stock rom file using Odin. I finally got the correct one from SamMobile.
Anyone having trouble on galaxy phones should check out rootjunky's youtube posts. He's great!! You have to be careful though because he jumps around on different builds. My only question now is whether or not Hyperdrive is compatible with the MK2. Everything I see is for the MDK and others. Is the build number critical or is it more critical to have the compatible recovery or both? I thought I would ask before I try flashing this rom again. Also, any suggestions on compatible MK2 roms would be great. I'm having trouble finding any.
Thanks,
BC
RollTide2626 said:
UPDATE: Hey buddy - I got it fixed yesterday. It's amazing how much you learn by making mistakes. My first mistake was, as mentioned in an earlier post, I got trigger happy and flashed to my stock rom slot instead of setting up a custom slot (stupid me). Looking back, I can't believe I did that. My second mistake was trying to reflash the incorrect stock rom file using Odin. I finally got the correct one from SamMobile.
Anyone having trouble on galaxy phones should check out rootjunky's youtube posts. He's great!! You have to be careful though because he jumps around on different builds. My only question now is whether or not Hyperdrive is compatible with the MK2. Everything I see is for the MDK and others. Is the build number critical or is it more critical to have the compatible recovery or both? I thought I would ask before I try flashing this rom again. Also, any suggestions on compatible MK2 roms would be great. I'm having trouble finding any.
Thanks,
BC
Click to expand...
Click to collapse
Glad to hear you're back in business!!!
Hyperdrive is definitely an option for you ..
Take a look at this thread it has all your options its a work in progress but the op is really good at updating and helping out
http://forum.xda-developers.com/showthread.php?t=2630040
I have a couple other links I'll send your way too that'll help you in the future hold on...
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:29 AM ---------- Previous post was at 10:27 AM ----------
Here
http://forum.xda-developers.com/showthread.php?t=2606501
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
And hers a great list of videos on various things
http://forum.xda-developers.com/showthread.php?t=2337590
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Glad to hear you're back in business!!!
Hyperdrive is definitely an option for you ..
Take a look at this thread it has all your options its a work in progress but the op is really good at updating and helping out
http://forum.xda-developers.com/showthread.php?t=2630040
I have a couple other links I'll send your way too that'll help you in the future hold on...
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:29 AM ---------- Previous post was at 10:27 AM ----------
Here
http://forum.xda-developers.com/showthread.php?t=2606501
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Awesome - What a great source this place is.....Thanks again!!
RollTide2626 said:
Awesome - What a great source this place is.....Thanks again!!
Click to expand...
Click to collapse
It's really the most complete and helpful site I think for our phones.
Just remember that since you're on MK2 4.3 that whatever SafeStrap rom you flash must also be based off 4.3 as well, and you will also have to flash MK2 modules zip file as well.
And I'd also like to say for the record since were here.... You're most likely going to want to hold off on the KitKat update from Verizon until there are proven and reliable root methods and SafeStrap is available. .. that is if you want to keep flashing ROMs.
Just my two cents lol
Sent from my SCH-I545 using Tapatalk
I am trying to install eclipse on my phone and am stuck at the eclipse anamation. I have flashed it and the needed file for my version of s4. I have tried to find a solution but didnt. please help
bamige1 said:
I am trying to install eclipse on my phone and am stuck at the eclipse anamation. I have flashed it and the needed file for my version of s4. I have tried to find a solution but didnt. please help
Click to expand...
Click to collapse
Well that's just not enough info to help...
Your s4 build
Eclipse version
Recovery version
Maybe some steps that lead you up to here also..
As much info as u can give is the best way to assure someone on here cab maybe help you
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well that's just not enough info to help...
Your s4 build
Eclipse version
Recovery version
Maybe some steps that lead you up to here also..
As much info as u can give is the best way to assure someone on here cab maybe help you
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
s4: mk2 build
Recovery: Safestrap 3.71
Eclipse : The progress build 7
I followed this guide https://www.youtube.com/watch?v=qBP3CKGa9nU
bamige1 said:
s4: mk2 build
Recovery: Safestrap 3.71
Eclipse : The progress build 7
I followed this guide https://www.youtube.com/watch?v=qBP3CKGa9nU
Click to expand...
Click to collapse
I didn't check, but is Eclipse a Safestrap compatible ROM?
Sent from my NCC-1701 using Tapatalk 4
riker147 said:
I didn't check, but is Eclipse a Safestrap compatible ROM?
Sent from my NCC-1701 using Tapatalk 4
Click to expand...
Click to collapse
Yes, Eclipse V7 is Safestrap compatible. I'm just not sure if it's compatible with MK2.
bamige1 said:
I am trying to install eclipse on my phone and am stuck at the eclipse anamation. I have flashed it and the needed file for my version of s4. I have tried to find a solution but didnt. please help
Click to expand...
Click to collapse
'm running Eclipse build 7 on a Developer Edition S4. I recommend you go to the developer's website and check out the threads on Build 7 by other SafeStrap users. Go here:http://www.elementalxdesigns.com/eclipse/forumdisplay.php?55-Galaxy-S-IV
jpcalhoun said:
'm running Eclipse build 7 on a Developer Edition S4. I recommend you go to the developer's website and check out the threads on Build 7 by other SafeStrap users. Go here:http://www.elementalxdesigns.com/eclipse/forumdisplay.php?55-Galaxy-S-IV
Click to expand...
Click to collapse
It seems im the only one with this problem. In the installer I do full wipe and no kernel option and reboot when done. How did you get it to work
bamige1 said:
It seems im the only one with this problem. In the installer I do full wipe and no kernel option and reboot when done. How did you get it to work
Click to expand...
Click to collapse
Well first off, I'm not using SafeStrap. I have a Developer edition S4 so I have an unlocked bootloader and don't need SafeStrap. Have you visited the Dev's website. There are a lot of threads from SafeStrap users about installing build 7. If you haven't gone to that site you should...you might find the resolution to your problem. If I remember rightly there were other SafeStrap users who had the same problem as you and found a work-around. There is also an issue downloading and installing paid apps from Play Store, but there is a fix for that also in those threads. Check it out if you haven't already.
bamige1 said:
It seems im the only one with this problem. In the installer I do full wipe and no kernel option and reboot when done. How did you get it to work
Click to expand...
Click to collapse
I've just read the last few pages in the forum that bamige1 pointed you to. Eclipse 7 does indeed work on MK2 with Safestrap.
Since lots of people apparently have it working, the likely suspect is a bad download. Did you check the MD5 hash after download to verify that it was correct?
Re-downloading is probably worth trying.
k1mu said:
I've just read the last few pages in the forum that bamige1 pointed you to. Eclipse 7 does indeed work on MK2 with Safestrap.
Since lots of people apparently have it working, the likely suspect is a bad download. Did you check the MD5 hash after download to verify that it was correct?
Re-downloading is probably worth trying.
Click to expand...
Click to collapse
I got a download with correct md5 and I am testing it now.
Edit 1: Still Hangs. IDK why
bamige1 said:
I got a download with correct md5 and I am testing it now.
Edit 1: Still Hangs. IDK why
Click to expand...
Click to collapse
At this point, it's past time for you to involve the ROM developer. Since nobody using Eclipse has posted here, you'll need to reach out to those that are successfully using it.
k1mu said:
At this point, it's past time for you to involve the ROM developer. Since nobody using Eclipse has posted here, you'll need to reach out to those that are successfully using it.
Click to expand...
Click to collapse
I posted on the fourm hosting Eclipse with problem. I have yet to get a responce but had already posted there after it failed with the correct download. Thanks for the help.