Have samsung S3 (I9300) . cannot pass the LOGO screen
I installed ClockworkMod Touch 6.0.3.2 on the device (using ODIN) and use the menu to
1. Wipe the cache
2. Wipe the DevL
3. fix permissions
After complete , the phone reboot and I get the application in UPDATING ... Screen , It cannot complete the Samsung APP
The phone was working find until yesterday , the last thing was using the camera to get a video , phone restarted and stack there
The is valuable information that was not properly backed up (contacts and calendar setup)
Looking for an idea that can be done to at least save the data?
Ilan.
ilanravid said:
2. Wipe the DevL
Click to expand...
Click to collapse
What's this?
ilanravid said:
I installed ClockworkMod Touch 6.0.3.2
Click to expand...
Click to collapse
CWM is very old.
Please install:
twrp-2.8.6.1-i9300.tar
Related
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
ippo.san said:
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
Click to expand...
Click to collapse
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Hannibal226 said:
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Click to expand...
Click to collapse
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
ippo.san said:
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
Click to expand...
Click to collapse
YOU have no CWM recovery .
Did you follow the do not posts etc boot loop instructions post 1 Q&A
Flash a root and CWM kernel .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
ippo.san said:
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
Click to expand...
Click to collapse
If you're experiencing a bootloop
http://forum.xda-developers.com/showthread.php?t=1108499
Other wise check that you've flashed everything properly
it's not a boot loop as my phone doesn't even boot ...
ippo.san said:
it's not a boot loop as my phone doesn't even boot ...
Click to expand...
Click to collapse
yeah sorry about that realised later.
Try wiping from CWM or flashing official stock firmware all over again
I have fixed my problem.
It was soft bricked so I have follow one thread: http://forum.xda-developers.com/showthread.php?t=1457458
Anyway, thanks everyone for answering me !
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Pureemousseline said:
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Click to expand...
Click to collapse
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
gee2012 said:
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
Click to expand...
Click to collapse
Well, problem is i cannot access recovery, but thanks for helping
Go in downloadmode and flash a stock rom with Odin. See item 2 and 3 in my signature
Sent from my GT-I9300 using xda premium
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Pureemousseline said:
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Click to expand...
Click to collapse
Well just installedit, still the same bootloop problem, just boot screen changes
Up, please help me, i'm so desperate right now
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
JJEgan said:
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
Click to expand...
Click to collapse
THANKS SO MUCH FOR THIS I MANAGED TO GO TO RECOVERY AND DO THE UPDATE AGAIN, NOW MY PHONE WORKS PERFECTLY WITHOUT LOSING DATA !!!!
Thank you really really much for this
suddenly my s3 has stopped working i didn't do anything wrong i even didn't root it or upgrade it, i installed the software more than one but it's still not working it just show samsung galaxy s3 gti9300 and continue to reboot what should i do please answer me.
and thank you
Yaser Kawther said:
suddenly my s3 has stopped working i didn't do anything wrong i even didn't root it or upgrade it, i installed the software more than one but it's still not working it just show samsung galaxy s3 gti9300 and continue to reboot what should i do please answer me.
and thank you
Click to expand...
Click to collapse
does it bootloop? (reboot everytime again automaticly?)
safariking said:
does it bootloop? (reboot everytime again automaticly?)
Click to expand...
Click to collapse
it just show samsung galaxy s3 gti9300 and continue to reboot
Click to expand...
Click to collapse
Yes.
Glebun said:
Yes.
Click to expand...
Click to collapse
Okay this is simple:
Boot into Recovery (CWM) (Normal recovery is also ok!)
- wipe data/factory reset
- wipe cache partion
- Go to advanced and wipe dalvik cache (You don't have this option in stock recovery but it is not realy neccesery so don't mind!)
Reboot and the Galaxy S3 should be come back alive!
i installed the ink effect for s3 and i have 4.1.2 JB
i have done what in this video
http://www.youtube.com/watch?v=tBf8HxYjkqI and after restart my S3 stuck in samsung boot screen
what i have 2 do now (
plz help me
m7md_k9 said:
i installed the ink effect for s3 and i have 4.1.2 JB
i have done what in this video
http://www.youtube.com/watch?v=tBf8HxYjkqI and after restart my S3 stuck in samsung boot screen
what i have 2 do now (
plz help me
Click to expand...
Click to collapse
Boot to recovery and select wipe cache partition, then advanced and wipe Dalvik, then reboot.
If that doesn't solve it again in recovery wipe data/factory reset, and if that one doesn't work restore the backup you (should have) made before flashing the mod. If you have no backup flash a new ROM, either custom via recovery or stock via Odin will work.
hello xda,
i tried to insatll CM 11 on two SGS3 GT-I9300 and after installation first boot to CM, for any reason if i restarted the phone or power it off the device will power up showing the first Screen of Galaxy S3 model then will go in deep black screen like the phone missed the CM boot file.
Here is the procedure i used to follow, please bare with me and tell me where i did mistake
1- Rooting the device using CF-Auto Root (Optional as i think since there is no KNOX in 4.3 version)
2- Flashing TWRP Recovery using Odin
3- Using TWRP to flash both CM11 stable version and GAPPs
4- Reboot (CM works like charms!!!)
5- Any reboot happen, phone will power up showing the SGS3 Logo then goes in deep black screen!!
please give a hand and help me guys.
milan guy said:
hello xda,
please give a hand and help me guys.
Click to expand...
Click to collapse
Do a clean install. Do factory reset, wipe cache & dalvik cache, wipe System and Data. Flash the ROM and Gapps again.