hello xda,
i tried to insatll CM 11 on two SGS3 GT-I9300 and after installation first boot to CM, for any reason if i restarted the phone or power it off the device will power up showing the first Screen of Galaxy S3 model then will go in deep black screen like the phone missed the CM boot file.
Here is the procedure i used to follow, please bare with me and tell me where i did mistake
1- Rooting the device using CF-Auto Root (Optional as i think since there is no KNOX in 4.3 version)
2- Flashing TWRP Recovery using Odin
3- Using TWRP to flash both CM11 stable version and GAPPs
4- Reboot (CM works like charms!!!)
5- Any reboot happen, phone will power up showing the SGS3 Logo then goes in deep black screen!!
please give a hand and help me guys.
milan guy said:
hello xda,
please give a hand and help me guys.
Click to expand...
Click to collapse
Do a clean install. Do factory reset, wipe cache & dalvik cache, wipe System and Data. Flash the ROM and Gapps again.
Related
Hi Guys!
This is my first time posting here and also my first time using an Android but I'm a bit techie myself. I've jailbroken a lot of iphones but this is my first time rooting. I've read a lot of tutorials about rooting and installing cyanogenmod but it keeps failing. Below are the steps I've done:
1. Root the S3 I9300 (International) using CF-Root.
2. I copied cyanogen mod 9 (stable) and gapps on Internal SD.
3. After going to recovery mode, I've followed every instuctions given, I clicked wipe/factory reset, wipe cache and even wipe dalvik.
4. Then I install/flash cyanogenmod 9. It says insllation complete. then I installed gapps and installation complete.
5. Next step is to reboot, but after rebooting it just gets stuck at Samsung Galaxy S III I9300 boot logo.
I've done that 5 times already and still the same result. I've followed every detail about installing cyanogenmod but I don't know why it doesn't load.
I really need a solution.. Thanks
try format system in recovery before you flash
slaphead20 said:
try format system in recovery before you flash
Click to expand...
Click to collapse
I tried what you said and now every option i choose nothing is happening. Only the robot is showing with a thingie circling around its belly. what do i do now?
flipward said:
I tried what you said and now every option i choose nothing is happening. Only the robot is showing with a thingie circling around its belly. what do i do now?
Click to expand...
Click to collapse
Did you flash cm and gapps after you formatted system?
This phone is the Samsung Note 2 SHV-E250K.
I have had the this problem occur after a backup. I was messing about with boot animations and when I followed a tutorial on changing it, I ended up with a blank screen as my boot up. I had created a backup before it so I restored. I rebooted and suddenly I was stuck in a bootloop where the olleh splash shows up and then stays there. I followed tutorials to get rid of the bootloop but it has stayed. I wiped my data, the cache, the dalvik cache and even done a factory reset to try and fix my problem. I am still plagued with this. I was wondering if anybody can help me please.
The phone is rooted with TWRP as the recovery. I really need help with this.
Thanks.
Either this or that :/
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Gokulbalram said:
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Click to expand...
Click to collapse
Do I have to have CyanogenMod or can I have any ROM?
Like an AT&T Rom and then flash the SJKernal
Let me phrase this better. Cyanogenmod isn't available for my device, but it is available for the AT&T version. Would it be possible for you to give me a step to step guide on how to install that along with touchWiz because I want to keep the S-pen.
stayfrosty48 said:
Do I have to have CyanogenMod or can I have any ROM?
Like an AT&T Rom and then flash the SJKernal
Let me phrase this better. Cyanogenmod isn't available for my device, but it is available for the AT&T version. Would it be possible for you to give me a step to step guide on how to install that along with touchWiz because I want to keep the S-pen.
Click to expand...
Click to collapse
I'm not quite used to a Note 2. I've even read about ROMs for the Note 2, but I think the S-pen would be out of the question.
EDIT: You could try porting a ROM to your Note 2 from another device with the same type of chipset/processor.
Hit Thanks if it helped!
Gokulbalram said:
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Click to expand...
Click to collapse
Would you please tell where can I find Cyanogen Mod for SHV-E250K? Porting the ROM.... You mean to restore the backup of ROM from other similar phone to mine?
bakhtjs said:
Would you please tell where can I find Cyanogen Mod for SHV-E250K? Porting the ROM.... You mean to restore the backup of ROM from other similar phone to mine?
Click to expand...
Click to collapse
I tried searching, but didn't find any. Anyway, I found an official 4.4.2 update http://nasirtech.blogspot.in/2014/06/e250kktukne6-android-442-kitkat.html?m=1
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
sjkernel SHV-e250k
Hi,
I would like to flash latest CM, I read i can download any AT&T rom>install it> install sjkernel on my SHV-E250K and it will work.
I wanted to try it, where can i get sjkernel? sjkernel thread on xda is dead
flash stock firmware
Gokulbalram: i have also Korean SHV-E250K with boot loop only show galaxy note 2 and no recovery option i try many firmware but still boot loop and no recovery mode please help
Hello guys, i didn't find any post with this issue so here i go:
I had my razr with the stock 4.1.2 (retail company: Claro (Argentina). It was lagging a bit sometimes so i wanted to give CM a try. I did this:
1) factory reset
2) installed safestrap (3.73 if i'm not wrong... i'll try to confirm that later... not at home right now)
3) booted to safestrap
4) wiped dalvik cache, android secur, cache, system, and something else the "how-to" tole me to
5) i flashed CM11 latest stable build (cm-11-20140804-SNAPSHOT-M9-umts_spyder) in stock rom (yeah i know probably not the smartest choice)... succes messege displayed
6) wiped dalvik and normal cache again
7) installed gapps
8)wiped again
9) intalled some kernel version FAIL MESSEGE
At this point i was going to reboot but safestrap said there was no OS installed so i did this:
1) create a new partition in slot 1
2) flash cm 11
3) rebooted (no "no os installed" messege this time)
The red M logo was displayed and then black screen.
I can boot it to recovery, fastboot etc ("power+vol up+vol down" menu).
I tried to wipe and reset from recovery but it didn't work and i also tried to flash my original 4.1.2 rom with RSD lite which failed at step 6/19 with no error code whatsoever.
Any idea how i might bring it back to life?
Hahaha hey Hermano, you´re in pretty trouble here huh?
So you´ve Installed the buggy CM in stock slot... Hope somebody can help you
I´m subscribed to this thread to see the solution, cause i was thinking to do the same
Don´t know if you solved your problem..
Anyway it looks like help
http://forum.xda-developers.com/showthread.php?t=2194825
Help guys. So my problem is that, my SG3 I9300 is keep on rebooting. It'll just boot to my desktop for about 2-3 seconds then it will reboot again and again. I have to remove my battery for about half an hour and put it back on to reboot successfully. Another thing is that after it reboots successfully, when I use applications like FB / COC it also reboots on its own so as the stock camera application. Apollo is a system app like the camera right? But Apollo works without any problem unlike the camera.
I thought it is a bootloop problem, just like what I've said on my previous post. Sorry for that.
So here are the things I've tried:
1. Flash stock rom (from Sam mobile) thru Odin
2. Delete cache and factory reset in custom recovery
3. Factory reset on TWRP - Wipe everything including Internal sd - Flash Megawipe
4. Flash other custom roms thru TWRP/CWM
5. Flash stock rom thru Kies
The problem still occurs after everything I've done. So please help me
Thanks! :good:
Current rom: cm11 m12
Android version: 4.4.4 KK
Kernel: boeffla 2.7 NG
JohnRod said:
Help guys. So my problem is that, my SG3 I9300 is keep on rebooting. It'll just boot to my desktop for about 2-3 seconds then it will reboot again and again. I have to remove my battery for about half an hour and put it back on to reboot successfully. Another thing is that after it reboots successfully, when I use applications like FB / COC it also reboots on its own so as the stock camera application. Apollo is a system app like the camera right? But Apollo works without any problem unlike the camera.
I thought it is a bootloop problem, just like what I've said on my previous post. Sorry for that.
So here are the things I've tried:
1. Flash stock rom (from Sam mobile) thru Odin
2. Delete cache and factory reset in custom recovery
3. Factory reset on TWRP - Wipe everything including Internal sd - Flash Megawipe
4. Flash other custom roms thru TWRP/CWM
5. Flash stock rom thru Kies
The problem still occurs after everything I've done. So please help me
Thanks! :good:
Current rom: cm11 m12
Android version: 4.4.4 KK
Kernel: boeffla 2.7 NG
Click to expand...
Click to collapse
Try another battery if not it is a faulty power button or other hardware problem. I see you have tried other roms so this rules out a software problem....
tallman43 said:
Try another battery if not it is a faulty power button or other hardware problem. I see you have tried other roms so this rules out a software problem....
Click to expand...
Click to collapse
I'm hoping it is a battery problem alone. I'll note that for now bud, thanks! :good:
my phone always restarts after downloading custom lollipop firmwares
help please
Samsung galaxy s2
al_sa3b said:
my phone always restarts after downloading custom lollipop firmwares
help please
Samsung galaxy s2
Click to expand...
Click to collapse
Which ROM/ROMs are you using or have tried? What steps to flash the ROM are you using?
Try the following method:
1. Flash any Lollipop compatible recovery, such as Apolo TWRP.
2. After flashing, reboot into recovery, and not into system.
3. Wipe Data, Cache, System and Dalvik Cache.
4. Flash the Lollipop ROM, GApps, and SuperSU.
5. Reboot System.
That should do it. If you're still stuck, then don't hesitate to ask. Also, this is not the correct place to post your question. You have to use this forum for all the Q&A.
Regards.
thanks bro
i tried many roms such as
SlimLP - Beta#12 [UNOFFICIAL]
and many
the case is when i try to push the power button or flip the screen the device restarts
but not from the beginning only a boot animation that happens with all roms
i did the same steps
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeez help