Related
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Jokesy said:
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Robotr0n said:
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Click to expand...
Click to collapse
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Jokesy said:
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Robotr0n said:
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Click to expand...
Click to collapse
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Jokesy said:
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
if the above doesn't work try flashing stock from download mode - ODIN
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Robotr0n said:
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
Click to expand...
Click to collapse
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
serialteg said:
if the above doesn't work try flashing stock from download mode - ODIN
Click to expand...
Click to collapse
Thanks. I´ll try that.
Lushstep said:
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Click to expand...
Click to collapse
Also thanks, I was afraid of this, everytime when I´m flashing via ODIN I have bad feelings.
Jokesy said:
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes MD5 sums match and they are allright, I downloaded all of them today from official repositories. Also thanks for helping
I´m goind off to bed, long day full of flashing and bootlooping Thank you all guys. :good:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Robotr0n said:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Click to expand...
Click to collapse
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Jokesy said:
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Click to expand...
Click to collapse
OK, I´m going to try it now.
Robotr0n said:
OK, I´m going to try it now.
Click to expand...
Click to collapse
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Jokesy said:
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Click to expand...
Click to collapse
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
*boy*racer* said:
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Click to expand...
Click to collapse
I don´t know how to get these logcats.
Jokesy said:
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
Click to expand...
Click to collapse
You really think that all these files which I downloaded are damages ? Uhm I don´t know but I don´t think so.
I tried this with Siyah kernel once and nothing happend. But I´ll give it a try again.
EDIT:
OH, God. I tried different stock ROM and even the new stock ROM wont boot... after i restart mobile, I´m in factory mode :-/
How to do a logcat
Ok so this is what i do.
. Download attachment and extract anywhere
.Open up Platform-tools folder and hold Shift+right click on an empty space within the folder.
.Click on "Open command window here"
.In the command window, type "adb logcat"
.Plug in device & turn it on
.It should do a logcat
leave it for about 1 min then disconnect device. Right click the logcat and select mark then highlight all and right click again. go to pastebin.com or something like that then paste it and save and give us the link.
hope this helps
hello to all
well i have tested a few ROM´s but the Custom Stock Rom (Codenam: ETERNITY) is one of the best in my opinion.
I have flashed this Rom, and it worked realy fine, my first mistake was that i did not make a backup, and my second mistake was that i have tried to flash some Mod´s.
After flashing a few Mod the Rom does not working correctly, anway i though i reflash it again, but that was not so easy as i thought.
After four time flashing, it did not work, so i thought, i flash the Original Samsung Firmware (i downloaded from Sammobile) so after flashing i rooted my S2 again and the Rom Eternity download it again, and save it in my mobile, in CWM window, i have follow this instructions.
Installation Pocedures:
If you're coming from ICS Roms, Stock Roms, AOKP/AOSP Roms or Custom Roms:
Download the zip file.
Put it in either internal or external SDCard.
Reboot in recovery, wipe data/factory reset, wipe cache partition, wipe dalvik cache.
Go to Mount and storage, format preload.
*If you do not have fromat preload in recovery (Except Philz and Jeboo kernels), Please go to Other Links section on 1st post to get the GS2ROMWipe. Then, run this in recovery*
Install the ROM.
After installation finish, reboot your device.
The first boot will take several minutes.
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Then, open up SuperSU App and update it.
But it did not worked, later i have follow the instructions from the Video, the same problem.
I see only on Screen : " Samsung Brilliantly Stock Custom Stock ROM"
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Click to expand...
Click to collapse
Well i have waited over 20 minutes but nothing happend.
I have ad a pic that you can see the information about my S2, and please sorry for my poor english.
I hope you guys have a idea how can i slove this problem.
Thank you all very much in advance and i hope one of you have a great solution
greets
vijay
?
Sent from the little guy
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom
This phone is the Samsung Note 2 SHV-E250K.
I have had the this problem occur after a backup. I was messing about with boot animations and when I followed a tutorial on changing it, I ended up with a blank screen as my boot up. I had created a backup before it so I restored. I rebooted and suddenly I was stuck in a bootloop where the olleh splash shows up and then stays there. I followed tutorials to get rid of the bootloop but it has stayed. I wiped my data, the cache, the dalvik cache and even done a factory reset to try and fix my problem. I am still plagued with this. I was wondering if anybody can help me please.
The phone is rooted with TWRP as the recovery. I really need help with this.
Thanks.
Either this or that :/
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Gokulbalram said:
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Click to expand...
Click to collapse
Do I have to have CyanogenMod or can I have any ROM?
Like an AT&T Rom and then flash the SJKernal
Let me phrase this better. Cyanogenmod isn't available for my device, but it is available for the AT&T version. Would it be possible for you to give me a step to step guide on how to install that along with touchWiz because I want to keep the S-pen.
stayfrosty48 said:
Do I have to have CyanogenMod or can I have any ROM?
Like an AT&T Rom and then flash the SJKernal
Let me phrase this better. Cyanogenmod isn't available for my device, but it is available for the AT&T version. Would it be possible for you to give me a step to step guide on how to install that along with touchWiz because I want to keep the S-pen.
Click to expand...
Click to collapse
I'm not quite used to a Note 2. I've even read about ROMs for the Note 2, but I think the S-pen would be out of the question.
EDIT: You could try porting a ROM to your Note 2 from another device with the same type of chipset/processor.
Hit Thanks if it helped!
Gokulbalram said:
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Click to expand...
Click to collapse
Would you please tell where can I find Cyanogen Mod for SHV-E250K? Porting the ROM.... You mean to restore the backup of ROM from other similar phone to mine?
bakhtjs said:
Would you please tell where can I find Cyanogen Mod for SHV-E250K? Porting the ROM.... You mean to restore the backup of ROM from other similar phone to mine?
Click to expand...
Click to collapse
I tried searching, but didn't find any. Anyway, I found an official 4.4.2 update http://nasirtech.blogspot.in/2014/06/e250kktukne6-android-442-kitkat.html?m=1
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
sjkernel SHV-e250k
Hi,
I would like to flash latest CM, I read i can download any AT&T rom>install it> install sjkernel on my SHV-E250K and it will work.
I wanted to try it, where can i get sjkernel? sjkernel thread on xda is dead
flash stock firmware
Gokulbalram: i have also Korean SHV-E250K with boot loop only show galaxy note 2 and no recovery option i try many firmware but still boot loop and no recovery mode please help
hello xda,
i tried to insatll CM 11 on two SGS3 GT-I9300 and after installation first boot to CM, for any reason if i restarted the phone or power it off the device will power up showing the first Screen of Galaxy S3 model then will go in deep black screen like the phone missed the CM boot file.
Here is the procedure i used to follow, please bare with me and tell me where i did mistake
1- Rooting the device using CF-Auto Root (Optional as i think since there is no KNOX in 4.3 version)
2- Flashing TWRP Recovery using Odin
3- Using TWRP to flash both CM11 stable version and GAPPs
4- Reboot (CM works like charms!!!)
5- Any reboot happen, phone will power up showing the SGS3 Logo then goes in deep black screen!!
please give a hand and help me guys.
milan guy said:
hello xda,
please give a hand and help me guys.
Click to expand...
Click to collapse
Do a clean install. Do factory reset, wipe cache & dalvik cache, wipe System and Data. Flash the ROM and Gapps again.