Hi all I am a new user ...... i have samsung galaxy s3 i9300 i rooted it then i installed cm 13 and twrp latest version .... then i faced a problem in super su and root so i decided to install it again so i went to twrp ....... here is my problem i wiped data and cache and delvk cache then i went to my sd card who had the cm 13 and gapps on it,then i tried to flash cm13 (cyangemod) again but it keept flashing.... idont know why so now i dont have an os on my phone .... can any one help me plz ?????
Reboot to recovery again, wipe data, cache, system & dalvik cache & flash CM13 again
Also CM13 has built-in root, you have just to enable it under Developer Settings
Related
I'm experiencing Bootloops after flashing this ROM for 5x (tried every possible solution). I followed the instructions in the thread of RR JB. Anyone experiencing this problem?
Wipe dalvilk cache , wipe cache ,reflash zip rom RR JB with CWR , fix permission .... if remains in boot loop , run a full wipe , (factory reset) ,from the recovery mode... reboot
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
rahulbrand said:
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
Click to expand...
Click to collapse
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Christiaan91 said:
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Click to expand...
Click to collapse
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
Can you give us a step by step program of what you're doing when install a new rom?
Christiaan91 said:
Can you give us a step by step program of what you're doing when install a new rom?
Click to expand...
Click to collapse
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
And what does the op say?
"1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot"
In stead of step 1 i would suggest:
Mounting /system, /data and /cache
Format /system, /data and /cache
Then proceed with step 2 etc...
Everything will be lost so make a back-up with titanium backup. (don't back-up/restore system apps)
Clean Install
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
flasherruts said:
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
Click to expand...
Click to collapse
Worked Fine...Thanks..
Hey guys,
I have a samsung galaxy s3 i9300 running cm11.
My question is, can I install cm13 the same way I installed cm11?
I did it this way:
>Went into recovery mode (twrp)
>Wiped data, cache and dalvik cache
>Installed cm11.zip
>Rebooted the system
>Went into recovery mode again, and installed gapps ARM 4.4 Aroma
>Rebooted the system
I rooted it before ofc
Greets
Sure
Yes you can just make sure to backup everything on sdcard via recovery
Hello guys,
I wanted to flash Cyanogen 13.0 on my OPX. I followed the instructions on the Cyanogen-Downloadsite, but after flashing with TWRP I always stucking at the bootlogo....
I waited more than 30 min, but nothing happens... While flashing I get no errors or warnings.... It seems to be alright...
Then I tried another Marshmallow ROM, but I get always the same issue...
Thank you in adavance!
need more info dude, what rom were you before the issue presented itself ? recovery version ? data, cache & system formatted to which filesystem ? what did you wipe ? what all did you flash with or after the rom ?
hi
asuming u have opened bootloader and have installed twrp this is what i do
1.put the rom and gapps on the root of the phone storage
2. factory/data rest in twrp
3.flash rom via twrp
4.clean chache/delvi
5.flash gaaps
6.clean cache/delvi again
reboot system and im good to go try this do a full flash the way i have mentioned dont do a dirty flash
im sure u will succeed good luck
If you didn't unlock the bootloader then it will not boot anything other than the stock OS.
Ok , Im running CM 13 i9300 and it worked so well except the camera. I always got the error "Can't connect to camera" . So I was trying to fix that problem and I found couple of solution . The solution need an app that requires SuperSU permission . And It was kinda weird because there's no "permission asking" popup from SuperSU. So I open SuperSU and it told me to update SuperSU binary file. So I tried to update it and it failed. So I tried to update it manually but I found other thing which is to flash the latest version of SuperSU direct from chainfire website. I deleted the old SuperSU (The one that needs to be updated) and I flashed the new SuperSU zip and wipe dalvik cache through my TWRP Recovery and then I reboot my phone . And got stuck at the Cyanogenmod Logo . So what should I do to get my phone back to normal ? I mean back to CM13 and everything I have before. PLS HELP
Note : actually , after I flashed CM 13 . I dont have the SuperSU in my apps . So I manually downloaded it from the playstore . It's weird because it should automatically be there .
Isn't root access found under developer settings?
audit13 said:
Isn't root access found under developer settings?
Click to expand...
Click to collapse
I seriously dunno about the root access at the developer settings . Now my phone is soft bricked and I'm gonna lose all of my data. Any clue on how to reflash the CM13 without deleting my stuff?(factory reset)
p/s : Yes , It's in the Developer settings
Boot into TWRP and reflash the same version of CM that was on the phone before it soft-bricked.
audit13 said:
Boot into TWRP and reflash the same version of CM that was on the phone before it soft-bricked.
Click to expand...
Click to collapse
Should I clear data , wipe cache and dalvik , factory reset all that or just go to TWRP and just flash
You could just flash over the existing ROM without wiping. If it doesn't boot, wipe cache. If it still doesn't boot, wipe data and cache.
audit13 said:
You could just flash over the existing ROM without wiping. If it doesn't boot, wipe cache. If it still doesn't boot, wipe data and cache.
Click to expand...
Click to collapse
Ok sir , new problem .. So I uses CM13 Nightlies , And I dont remember which version. Can I use latest version of CM13 Nightlies?
Yes, try the latest nightly.
audit13 said:
Yes, try the latest nightly.
Click to expand...
Click to collapse
Man It worked , seriously thank you man :good: :good: :good:
Glad to hear you solved the problem. We're all here to help and learn from each other.