So, i had my phone off for awhile, and on my bed, i was using my sim to try to network unlock an old tablet. tablet wont unlock, so i go to put the SIM back in and reboot the phone, after 5 min i notice i am stuck in a bootloop. so ive tried using ADB to boot into recovery, and i cant....and ive tried getting into recovery via hardware....no possible way???? so basically i have a phone, that when put into fastboot, wont connect to ADB, and that means wont boot into recovery....totally stuck in a loop, been half an hour now. can anyone help me??? ive tried using a mac to use ADB (no drivers) but still no success. PLEASEE. ADB wont connect (and I had the same issue right after root. ADB worked one time, the one time i needed to flash TWRP, and then flash Debranded, Debloated, Deodexed H901-10c ROM for T-Mobile LG V10 (LG-H901) - Clean & Stable by @siraltus, which it is an amazing ROM, and i dont think this had anything to do with this. but please i really need to get my only phone working. if this is in the wrong section please wait till i get an answer to flag it...
All you have to do is make sure the phone is off with the battery in, then hold the volume down button and insert the micro usb cable to your computer, it'll boot up fastboot.
ohmygaa said:
All you have to do is make sure the phone is off with the battery in, then hold the volume down button and insert the micro usb cable to your computer, it'll boot up fastboot.
Click to expand...
Click to collapse
yeah...but ADB doesnt work, i still have no way of getting into recovery...i did the fastboot method
Have you tried erasing your partitions and flashing stock again?
EDIT: using fastboot erase system / fastboot flash system system.img / etc
ohmygaa said:
Have you tried erasing your partitions and flashing stock again?
EDIT: using fastboot erase system / fastboot flash system system.img / etc
Click to expand...
Click to collapse
ADB DOES NOT CONNECT, nothing i do with the shell gets sent to the phone
Have you tried bootng into recovery?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 11:59 PM ---------- Previous post was at 11:56 PM ----------
From power off. Press and hold both power and volume down... When you see the LG logo release and repress the power button, DON'T RELEASE THE VOLUME DOWN KEY. It should bring up a factory reset many select yes... Then yes again...
Sent from my Nexus 6 using Tapatalk
@SPHM900 any luck
Sent from my LG-H901 using Tapatalk
Will try factory reboot after I get home
got into recovery, thank you very very much
Good deal...
Sent from my LG-H901 using Tapatalk
@ZDeuce2
Great job bud.....[emoji106]
@SPHM900
glad you got it working Sir....
Note: MOD please move this to Q&A section. Solved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, the power vol down actually brings you into recovery instead of a factory reboot. Didn't know that. After I got into recovery, I did a back up. a system wipe did nothing. So I reflashed the v10 stock non root and reflashed the @siraltus ROM over top. then restored data. Its like it never happened. Thanks again guys!!! Issue resolved
SPHM900 said:
So, the power vol down actually brings you into recovery instead of a factory reboot. Didn't know that. After I got into recovery, I did a back up. a system wipe did nothing. So I reflashed the v10 stock non root and reflashed the @siraltus ROM over top. then restored data. Its like it never happened. Thanks again guys!!! Issue resolved
Click to expand...
Click to collapse
Power+Vol Down always takes you into recovery. On stock recovery, it automatically triggers a factory reset, but with TWRP, it just boots it.
Glad to hear you got your problem resolved. Nice work guys.
@KennyG123, @svetius could we get this thread moved to the proper forum?
Sent from my LG-H901 using XDA Free mobile app
Apache0c said:
Glad to hear you got your problem resolved. Nice work guys.
@KennyG123, @svetius could we get this thread moved to the proper forum?
Sent from my LG-H901 using XDA Free mobile app
Click to expand...
Click to collapse
Done
KennyG123 said:
Done
Click to expand...
Click to collapse
Well there's a familiar face I haven't seen in awhile! How goes it man! Here I was thinking I'd have to have a rage fit to see you again!!!
markbencze said:
Well there's a familiar face I haven't seen in awhile! How goes it man! Here I was thinking I'd have to have a rage fit to see you again!!!
Click to expand...
Click to collapse
I still show up when paged. Promotion at work means less free time for XDA during the day though.
Related
This thread is specially for people who are new in Motorola, and don't know how to solve their problems,
Click to expand...
Click to collapse
There are some necessary tools for all Motorola users that i'm trying to explain about them briefly :
Click to expand...
Click to collapse
1- Motorola Drivers
This is a must have software you have to install on pc or laptop, it's impossible for pc to detect your phone without this software, so do it
Click to expand...
Click to collapse
2- RSD lite
This is official software from Motorola to flash Fastboot files to the device, so you have to install the software on your pc or laptop,
After flashing a costum rom, you can revert to stock with this software, also when you are in a
bootloop you can go back to stock Rom with this software:
Click to expand...
Click to collapse
- download fastboot file you need from here or here
- extract it in a folder, you have a XML file here
- run RSD lite
- browse XML file to the empty box
- connect the phone to the pc via usb cable in AP Fastboot mode
- click start button on RSD & be patient to flash the files
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some Tips of Razr:
- when the phone is freezed or you are in a bootloop, you can force the device to power down, just push & hold Vol - and Vol+ and
power buttons at the same time for 10 seconds, the phone will be shut down
- for going to boot menu, first turn off the phone, then push & hold Vol buttons and power button at the same time
for about 10seconds, then you will enter to boot menu, now use Vol - button to scroll and Vol + to select an option.
- for going to Stock Recovery, you have to select "recovery" in boot menu, then you'll see a black screen with Android triangle in the middle, now you have to push Vol - + buttons at the same time to enter to recovery
Click to expand...
Click to collapse
I'll update this post soooooon
is this helpful? feel free to push ------------------------------------------------------------------------------ THANK BUTTON
reserved for next updates
This will be of great help to all of us! Nice job.
Not quite a noob, but it's nice to see this in one posting. Gracias!
Question about reverting to stock to return to Verizon.
I never had to return my Incredible do noob on UNroot.
Do I simply unroot and that 'Covers'my tracks? Or should I revert back to 2.3.5/173?
My earpiece crackles so I need a replacement
Sent from my DROID RAZR using XDA
blcklab said:
Question about reverting to stock to return to Verizon.
I never had to return my Incredible do noob on UNroot.
Do I simply unroot and that 'Covers'my tracks? Or should I revert back to 2.3.5/173?
My earpiece crackles so I need a replacement
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
I have xt910 & i dont know about versions of verizon, if you are on 2.3.5 now so you can revert simply with rsd lite & no need to unroot,
But if your current android version is 2.3.6 you have to take a look at this thread:
http://forum.xda-developers.com/showthread.php?p=21575589
Sent from my XT910 using Tapatalk
So unroot Might not be enough for a warranty return?
Sent from my DROID RAZR using XDA
Thanks, you are the best, used this for fix my phone!
blcklab said:
So unroot Might not be enough for a warranty return?
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
Flash via Rsd will unroot your device, and sure, itz enough
Newbieshwa said:
Thanks, you are the best, used this for fix my phone!
Click to expand...
Click to collapse
Not at all, My pleasure
Sent from my XT910 using Tapatalk
You may want to add after flashing a stock rom in RSD, if you are stuck at the moto logo, to reboot into recovery and do a system wipe again to fix.
I got stuck with the Android triangle! I think I read somewhere to tap all 4 corners then hit home. That didn't work but I got the power button and that did the trick. Went straight to stick recovery and I rebooted the phone. We'll return today and get another although it pisses me off because I bought a new phone last week and afaik the replacements are refurbs
Sent from my A500 using XDA
Hello , noob here .
How do i know what fastboot file i need ?
i have a swedish XT910 ..
Thx
carlsberg112 said:
Hello , noob here .
How do i know what fastboot file i need ?
i have a swedish XT910 ..
Thx
Click to expand...
Click to collapse
Go to setting > about phone
And look at your system version and build number,
Also you can flash other fastboot files such as UK, but i don't know about supporting your language
Sliced by my Razr on Tapatalk
Who knows where is this ROM came from umts_SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_DATDE_CFC_HWp2b_SIGNED.xml.zip ?
Its clear with other roms - Retail, O2 & T-Mobile. But i dont know what means DATDE..
can you please send me a build prop file for umts spider xt910 please to [email protected] please
* Edit: found what I was looking for, please ignore!
Hello, I also do not know where to look at. I actually want to unlock my phone from uk's O2 and I do not know which rom to flash into? soory for being noob. Any help would much appreciated!
alexpen said:
Hello, I also do not know where to look at. I actually want to unlock my phone from uk's O2 and I do not know which rom to flash into? soory for being noob. Any help would much appreciated!
Click to expand...
Click to collapse
If u wanna unlock your device from ur carrier, look @ http://www.cellunlock.net/mobile/default.aspxhere
Also u can googling other sites for unlocking phone, then u can find fastboot files from op to flash
Sliced by my Razr on Tapatalk
zeidof said:
If u wanna unlock your device from ur carrier, look @ http://www.cellunlock.net/mobile/default.aspxhere
Also u can googling other sites for unlocking phone, then u can find fastboot files from op to flash
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
Nice tutorial zeidof
Sent from my XT910 using Tapatalk 2
Which fastboot file can I use for a Verizon Razr?
Hello guys. Its me again with a new project.
I present to you CWM 6.0.2.8. Its my project for the GT-I9070 but works on this device as well.!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download here :
Temporary (tested) - CWM 6.0.2.8
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
Thanks for the guy who pointed that it works on the i8160.
Please test and let me know the bugs, if you find any. For anyone who wants to build the permanent recovery, contact me and i will be happy to help!
Please consider donating. It helps me to continue my work.
I do not respond to tech support via PM
Doesn't work for me..
When I install Cwm.zip and press home +touch screen it rebooted back in Android.. I tried doing the same with volume up, but it then reboots into the original kernel..
it's work for me...
So, during the installation of cwm.zip, I repeatedly press home and touch the screen. Then it moves to cwm 5. After that, I install the cwm 6 (update.zip).
Thank you shaaan.
Okay it works now..
You have to repeadly press home and touchscreen..
Thanks shaan . I used your CWM to flash the Kirillos13 Riple effect and to do a backup and works ok.
Some time is dificult to start the cwm 5 recovery , I do it presing all the buttons including the home button and the down part of the screen at the same time and normally cwm 5 starts.
when i try to install my rom the phone reboots
Messi10 said:
when i try to install my rom the phone reboots
Click to expand...
Click to collapse
You used dsixda kitchen? Same problem to me too.. I think its because of the different mount points. Check script.
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
cbolumar said:
Thanks shaan . I used your CWM to flash the Kirillos13 Riple effect and to do a backup and works ok.
Some time is dificult to start the cwm 5 recovery , I do it presing all the buttons including the home button and the down part of the screen at the same time and normally cwm 5 starts.
Click to expand...
Click to collapse
I press home and power randomly.. it works. Just stop pressing power when you see cwm logo
Sent from my GT-I8160 using xda app-developers app
Dr01nE said:
You used dsixda kitchen? Same problem to me too.. I think its because of the different mount points. Check script
Click to expand...
Click to collapse
ya using kitchen
Messi10 said:
ya using kitchen
Click to expand...
Click to collapse
I think you need to change the line in updater script that has /dev/block/mmcblkXpYY/system
Edit:
Oh right.. check the rm command maybe its one of the causes. I have a different way to deodex my phone without recovery. If we get permanent recovery then I will make my own rom again but as of now, I have no idea what to do with the script
Sent from my GT-I8160 using xda app-developers app
Dr01nE said:
I think you need to change the line in updater script that has /dev/block/mmcblkXpYY/system
Edit:
Oh right.. check the rm command maybe its one of the causes. I have a different way to deodex my phone without recovery. If we get permanent recovery then I will make my own rom again but as of now, I have no idea what to do with the script
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
i think i will wait till a recovery comes
Messi10 said:
i think i will wait till a recovery comes
Click to expand...
Click to collapse
Why not make one yourself?
I do not respond to tech support via PM
Shaaan said:
Why not make one yourself?
I do not respond to tech support via PM
Click to expand...
Click to collapse
i don't know how
AW: [JB] CWM Recovery 6
When I try to install cwm.zip it starts the installation process but after a few seconds I just get a black screen. I tried various combinations of holding/pressing home button and touching the screen :/
Messi10 said:
i don't know how
Click to expand...
Click to collapse
Search for my guide. Post your doubts here.
I do not respond to tech support via PM
The procedure is a little bit problematic, to be honest.
Stock recovery is having a bit of an issue when it comes to mounting internal SD (eMMC).
...Then there's CWM 5, that has issues mounting either. I had to throw in an SD card, then mount eMMC - which in fact did not mount eMMC but external SD.
why is it after i flash this.. i followed all your instructions even the tapping the screen.. and when i successfully installed it then reboot and try to go to cwm recovery why is it it comes again in stock recover and not cwm recovery? i try do install it again and it always turn back to stock recovery? have anyone expiernced this?
bagnz0r said:
The procedure is a little bit problematic, to be honest.
Stock recovery is having a bit of an issue when it comes to mounting internal SD (eMMC).
...Then there's CWM 5, that has issues mounting either. I had to throw in an SD card, then mount eMMC - which in fact did not mount eMMC but external SD.
Click to expand...
Click to collapse
Ikr! The problem is a messed graphics file. So the issue is framebuffer related. Make a new recovery. Use the updated graphics.c and it will work directly.!
heml0ck said:
why is it after i flash this.. i followed all your instructions even the tapping the screen.. and when i successfully installed it then reboot and try to go to cwm recovery why is it it comes again in stock recover and not cwm recovery? i try do install it again and it always turn back to stock recovery? have anyone expiernced this?
Click to expand...
Click to collapse
As i already said, the recovery is temporary!
I do not respond to tech support via PM
This is work on xperia J???
Sent from my ST26i using xda app-developers app
Djocker said:
This is work on xperia J???
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
I don't really know. But you can give it a try. Since its temporary, you won't face any problems even if it doesn't work.
I do not respond to tech support via PM
Op updated. Now you can directly flash cwm 6..
I do not respond to tech support via PM
this has been going on for a week now, I upgraded my phone to the OTA 4.1.2 Jelly bean updated, I used OTA Root Keeper to keep my root access, and Im beyond lost, I dont know what to do now, I open my camera app after rebooting my phone and its working its showing everything moving but as soon as i hit the button to take a picture it crashes, I have formatted my phone twice, I have a backup saved on my safestrap but its pre jelly-bean, I never did one after i did the jelly bean update and im scared to do it because Im sure that would boot loop my phone
Do you need root? If not you can always Rsd lite using fast boot file to stock and start fresh
Sent from my XT910 using Tapatalk 2
naifs_br10 said:
Do you need root? If not you can always Rsd lite using fast boot file to stock and start fresh
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
No my phone is already rooted, Im on the 4.1.2 Jb, I upgraded from 4.0.4 and now my camera just freezes everytime i try to take a picture
jch1993 said:
No my phone is already rooted, Im on the 4.1.2 Jb, I upgraded from 4.0.4 and now my camera just freezes everytime i try to take a picture
Click to expand...
Click to collapse
used the fastboot files and rsd lite again clean install from scratch to your phone of jb and see if it helps maybe the ota didnt go through properly. try it out and let me know
naifs_br10 said:
used the fastboot files and rsd lite again clean install from scratch to your phone of jb and see if it helps maybe the ota didnt go through properly. try it out and let me know
Click to expand...
Click to collapse
Im not familar with Fastboot
jch1993 said:
Im not familar with Fastboot
Click to expand...
Click to collapse
Fastboot is stock firmware file for your hone according to the region of your phone your will download that and flash it through software Rsd lite 6 check android development section top thread that is sticky to find your fastboot file for your phone
Sent from my XT910 using Tapatalk 2
naifs_br10 said:
Fastboot is stock firmware file for your hone according to the region of your phone your will download that and flash it through software Rsd lite 6 check android development section top thread that is sticky to find your fastboot file for your phone
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Found The one I need over at http://sbf.droid-developers.org/
The power of GOOGLE!
well, ran into some problems, removed root (knew that was coming) Removed my recovery (didnt expect that)
Service stopped working for abit had to do that regular factory reset under privacy, and Camera now crashes instantly and says Camera
unable to initialize
http://forum.xda-developers.com/showthread.php?t=2192467&page=7
Tried this even after i used Rsd lite 6, I cant get anything to work.. Im at a loss for words...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jch1993 said:
Found The one I need over at http://sbf.droid-developers.org/
The power of GOOGLE!
well, ran into some problems, removed root (knew that was coming) Removed my recovery (didnt expect that)
Service stopped working for abit had to do that regular factory reset under privacy, and Camera now crashes instantly and says Camera
unable to initialize
http://forum.xda-developers.com/showthread.php?t=2192467&page=7
Tried this even after i used Rsd lite 6, I cant get anything to work.. Im at a loss for words...
Click to expand...
Click to collapse
I would try replacing the apk for your camera app, as it may be corrupt,or just use a different camera app. Stock isn't too great anyways.
~S
trebmalevets said:
I would try replacing the apk for your camera app, as it may be corrupt,or just use a different camera app. Stock isn't too great anyways.
~S
Click to expand...
Click to collapse
wouldnt the camera apk been replaced when i did the Fastboot?
jch1993 said:
wouldnt the camera apk been replaced when i did the Fastboot?
Click to expand...
Click to collapse
Why don't you use different camera instead of stock if ya not getting any fix for that.
http://forum.xda-developers.com/showthread.php?t=2206206
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
Why don't you use different camera instead of stock if ya not getting any fix for that.
http://forum.xda-developers.com/showthread.php?t=2206206
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
my phone isn't XT910
Try a third party camera app and see if it works.
If it was just s/w problem, should have worked after fastboot.
Sent from my DROID RAZR using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Your warranty is now void.
Untested build. I don't have the device. Someone with some balls please make a back up and give this a try and get back to me.
Any root issues http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
ROM: pulled
GAPPS: http://goo.im/devs/BaNkS/GApps%204.3
Thanks to the guys over at cyanogen, google, and uXylon.
Will have to give it a shot tonight
Sent from my SGH-I777 using Tapatalk 2
I flashed it, it booted into android fine but every time I selected start on the first setup screen it would reboot. Now I can't get into recovery, however I have a broken power button which might be causing complications. I'm working on getting back into recovery but this is an old phone so if I don't get it working, its no big deal.
s33d1ing said:
I flashed it, it booted into android fine but every time I selected start on the first setup screen it would reboot. Now I can't get into recovery, however I have a broken power button which might be causing complications. I'm working on getting back into recovery but this is an old phone so if I don't get it working, its no big deal.
Click to expand...
Click to collapse
Damn that is horrible. Power button doesn't work at all? Have you trye taking it apart and cleaning the contactors? What recovery do you have? Is there only one option? can you op to setup gapps later? You can always try using fastboot to get in there.
RBMacGregor said:
Damn that is horrible. Power button doesn't work at all? Have you trye taking it apart and cleaning the contactors? What recovery do you have? Is there only one option? can you op to setup gapps later? You can always try using fastboot to get in there.
Click to expand...
Click to collapse
I have taken the phone apart but I still couldn't get the power button to work. Anyhow, I just got everything restored and I'm going to try flashing it again. :laugh:
Okay, I just flashed the rom this time. It boots into android but when I try to open any app, the phone reboots.
s33d1ing said:
I have taken the phone apart but I still couldn't get the power button to work. Anyhow, I just got everything restored and I'm going to try flashing it again. :laugh:
Okay, I just flashed the rom this time. It boots into android but when I try to open any app, the phone reboots.
Click to expand...
Click to collapse
haha you have balls Ill give you that! Had me worried hate to brick someones device. Could you possibly logcat it? I think I need to change the tool chain compiling the kernel googles using 4.7 now and I'm not sure cyanogen is ready out of the box for it. Ill try with 4.6 tomorrow.
RBMacGregor said:
haha you have balls Ill give you that! Had me worried hate to brick someones device. Could you possibly logcat it? I think I need to change the tool chain compiling the kernel googles using 4.7 now and I'm not sure cyanogen is ready out of the box for it. Ill try with 4.6 tomorrow.
Click to expand...
Click to collapse
I cant get into settings to turn on usb debugging because the phone restarts every time I open settings. Is there any way to make a logcat in this situation?
s33d1ing said:
I cant get into settings to turn on usb debugging because the phone restarts every time I open settings. Is there any way to make a logcat in this situation?
Click to expand...
Click to collapse
See if you can download catlog and get the log that way for him.
Good luck.
Sent from the i777
I got a soft brick. Good thing I had a Jtag because I could not even get into download by button combination.
You may want to check and see if the i777 repo has even been updated to a useable state, as it had not been a few days ago when I last checked.
The kernel works but the ROM itself doesn't do much.
I have ported the CM 10.2 unofficial build pulled from GT-I9100 forum and I flashed it. All I can say is it worked fine but still is unstable..highly unstable. I used d default kernel and changed the modules and keypad script. It booted well and was fast. But phone heating issue and couple of FC's us what I encountered. And battery life issues.
Sent from my SGH-I777 using xda premium
AJ Newkirk said:
You may want to check and see if the i777 repo has even been updated to a useable state, as it had not been a few days ago when I last checked.
The kernel works but the ROM itself doesn't do much.
Click to expand...
Click to collapse
I had to make some changes to the i777 device tree to get it to build. Im gonna give it another go after work today.
twcobra said:
I got a soft brick. Good thing I had a Jtag because I could not even get into download by button combination.
Click to expand...
Click to collapse
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
RBMacGregor said:
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
Click to expand...
Click to collapse
Not sure what caused it. I had installed GAPPS with all the extras. Next time I try I will just install the ROM and the GAPPS core. Then the extra stuff one at a time. Believe me I started getting nervious when I could not get into download by button combo. I started breathing easy when I found my Jtag pluged it in and went rite to download on power up.
Anyone know why the rom was pulled?
Spinergy02 said:
Anyone know why the rom was pulled?
Click to expand...
Click to collapse
4.3.3 versions have TRIM Implementation ....and our devices aren't design for SSD overwrite deleted blocks
Sent from my SGH-M919 using xda premium
samprocat said:
4.3.3 versions have TRIM Implementation ....and our devices aren't design for SSD overwrite deleted blocks
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
TRIM would not be implemented on anything for our device. The SII version of CM10.2 and anything based off of CM10.2 trees would not contain TRIM.
I haven't made any calls but I sure hope I'm not having mic issues on 4.0 because voltage control is a really big deal to me and I don't want to upgrade.
Could someone explain why TRIM wouldn't be good for our devices?
RBMacGregor said:
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
Click to expand...
Click to collapse
I've had the same thing, doing pretty much nothing!
Fresh install, wiped everything, from system to memory card, plugged into USB transferring some files and BOOM, brick. Wipe again, reinstall, continue copying some files and brick again.
Needless to say I am sticking to 10.1 for a while longer.
Hi all.. Quick question.
I've just started the process of trying to root my One Max (international) and everything has gone smoothly with unlocking the bootloader etc, and i've flashed a CWM image to it as my recovery, but once i've rebooted, volume down and select recovery, hit power, it says entering recovery but then screen goes off, waits about 20-30 seconds and boots up as normal.. Is the CWM image file wrong? And if so, can i just redo the process of flashing the rom again the same way, or do i need to uninstall this image before i can? Does any new image not just overwrite?
I'm just a little frustrated at this point because it's now unlocked and tampered yet i have no root access.
RyanH77 said:
Hi all.. Quick question.
I've just started the process of trying to root my One Max (international) and everything has gone smoothly with unlocking the bootloader etc, and i've flashed a CWM image to it as my recovery, but once i've rebooted, volume down and select recovery, hit power, it says entering recovery but then screen goes off, waits about 20-30 seconds and boots up as normal.. Is the CWM image file wrong? And if so, can i just redo the process of flashing the rom again the same way, or do i need to uninstall this image before i can? Does any new image not just overwrite?
I'm just a little frustrated at this point because it's now unlocked and tampered yet i have no root access.
Click to expand...
Click to collapse
Go with twrp it roots the device after first time going through the recovery. I've heard of issued with cwm.
Sent from my HTC0P3P7 using XDA Free mobile app
cstrife999 said:
Go with twrp it roots the device after first time going through the recovery. I've heard of issued with cwm.
Sent from my HTC0P3P7 using XDA Free mobile app
Click to expand...
Click to collapse
The reason i picked CWM over TWRP was because i'm familiar with it and like the UI.. TWRP just seems too basic looking. But my initial question still remains. Can i simply re-run the process over the top with TWRP or do i need to remove CWM before i can write TWRP to the device?
RyanH77 said:
The reason i picked CWM over TWRP was because i'm familiar with it and like the UI.. TWRP just seems too basic looking. But my initial question still remains. Can i simply re-run the process over the top with TWRP or do i need to remove CWM before i can write TWRP to the device?
Click to expand...
Click to collapse
I would highly suggest twrp either way though yea always just flash over in fastboot.
Sent from my HTC0P3P7 using XDA Free mobile app
cstrife999 said:
I would highly suggest twrp either way though yea always just flash over in fastboot.
Sent from my HTC0P3P7 using XDA Free mobile app
Click to expand...
Click to collapse
Ok well i'll give TWRP a go. But do i need a specific .img file? Because when i go onto the TWRP site to get the version i need, it only lists Sprint and Verizon for the One Max. I'm on International so surely need a GSM or Non-US variant surely? Or can i just use the M7 GSM version?
Thanks.
RyanH77 said:
Ok well i'll give TWRP a go. But do i need a specific .img file? Because when i go onto the TWRP site to get the version i need, it only lists Sprint and Verizon for the One Max. I'm on International so surely need a GSM or Non-US variant surely? Or can i just use the M7 GSM version?
Thanks.
Click to expand...
Click to collapse
Ok, now i've just redone this procedure exactly the same but with TWRP instead of CWM and it's doing exactly the same thing.. Why does it just go blank after saying "entering recovery" then boot as normal after about 20 secs? I really want root access but can't see how i'm going to get it if my phone won't boot into recovery.
RyanH77 said:
Ok, now i've just redone this procedure exactly the same but with TWRP instead of CWM and it's doing exactly the same thing.. Why does it just go blank after saying "entering recovery" then boot as normal after about 20 secs? I really want root access but can't see how i'm going to get it if my phone won't boot into recovery.
Click to expand...
Click to collapse
Ok.. I finally figured what was wrong.. The .img was too new a version and clearly my phone didn't like it.. So i used an older version and it's done the whole process perfectly. So to anyone else having the same problem, try an older version.
Ok, hang on.. It seems i might not be rooted.. I've installed TWRP, done my Nandroid backup installed Superuser and a few root checkers and one of them said i was rooted, while the others couldn't gain access, same with Superuser and SuperSU, they both say they can't access binaries etc.. Now i assumed once the phone said tampered, unlocked and had TWRP installed that it was rooted.. Is this the case? I have attached some thumbnails of various screengrabs so someone can tell me if i am or if something has gone wrong.. When i did it on my DHD it was never this hard to root..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}