I flashed My Canvas HD via Flashtool 5.15 its working but after 2-3 days its again get brick automatically i again flashed Firmware Its Again behave Like Brick no charging only show in pc thats happan sorry for my bad english
Related
hi gys,
while flashing with SPtool for stock rom, my 8x 1000 got bricked,
i was using material L rom from http://forum.xda-developers.com/android/development/rom-android-l-material-rom-xolo-8x-1000-t3011562
i just wanted to switch to stock rom with SPtool. it detected my phone and immediately it was not responding and got closed. i tried again again again but no luck. phone is not even running recovery with volume keys.
no light, no sound. when i connects to pc it just makes a sound "tidinggg".
no charging indicator.
i lost hope with SPtool.
if any one can help Please.
Thanx
Dear team,
I am in deep trouble with my Canvas HD A116 and I need your help for this. Please note the sequence of events--
Four days back in the morning I found that my phone was stuck in the boot screen showing Canvas HD also it was very warm to touch.
I pulled out battery and restarted but still it was stuck.
I had happened previously also and I could repair it using SP tools firmware upgrade so I tried using this time also.
Something went wrong probably I formatted it or something like that in SP tools.
The phone was then not taking charger (no led) and was not starting as if completely dead.
I took the phone to service centre (two different centres as of now) and they said that phone is not taking software.
I tried flashing ROM in the phone using SP tools and different OMs available online but it says S_DL_PMT_ERR_NO_SPACE (5069)
I went to other mobile repair shops but all they say is that phone is not accepting software.
I have read on the net that this is bricked condition. Can this be repaired ? Please help.
utsav77 said:
Dear team,
I am in deep trouble with my Canvas HD A116 and I need your help for this. Please note the sequence of events--
Four days back in the morning I found that my phone was stuck in the boot screen showing Canvas HD also it was very warm to touch.
I pulled out battery and restarted but still it was stuck.
I had happened previously also and I could repair it using SP tools firmware upgrade so I tried using this time also.
Something went wrong probably I formatted it or something like that in SP tools.
The phone was then not taking charger (no led) and was not starting as if completely dead.
I took the phone to service centre (two different centres as of now) and they said that phone is not taking software.
I tried flashing ROM in the phone using SP tools and different OMs available online but it says S_DL_PMT_ERR_NO_SPACE (5069)
I went to other mobile repair shops but all they say is that phone is not accepting software.
I have read on the net that this is bricked condition. Can this be repaired ? Please help.
Click to expand...
Click to collapse
If recovery is still open do a full wipe before flashing with sp tool
Chaudhary Abdul said:
If recovery is still open do a full wipe before flashing with sp tool
Click to expand...
Click to collapse
if you can access recovery then do clean to install and flash any rom available for a116 ...
Hi,
I have exactly the same problem with my phone.
Did you solve your 5069 error? How?
Thank you.
Hello everyone,
My Micromax Canvas 2 A116 phone got hard bricked. Its completely dead nothing happens on pressing on/off switches, even computer is not detecting it. Also, please note that when I put the USB cable phone's flash light blink one time only this happen that's it.
I don't know android version installed on it, I bought this phone in june 2013, so, may be it should be Ice cream sandwich but don't remember exactly.
Please help, Is there a way I can start it again without sending to service center.
got error in sp flash tool and my whole firmware got deleted idk how , i plugged my charger and the phone is not reacting completely seems like its completely dead (i think my complete firmware got deleted ) i tried flashing again but its not happening ....
can anyone help me how to recover my dead a116 ??????? plz reply
i flashed micromax canvas knight A290 (mediatex M6592) stock rom but after a week it started crashing apps so i just rebooted my device but it went to a bootloop. then i flashed the stock rom ( i have already flashed it many time with full precaution) process went ok but now phone is not booting , no light , no charging when i connect it to flash again it gets recognised and flashing goes ok again but still no sign of life whatsoever. when i connect it to pc i can hear usb on/off sound. plz help me UNBRICK my device
BHATT said:
i flashed micromax canvas knight A290 (mediatex M6592) stock rom but after a week it started crashing apps so i just rebooted my device but it went to a bootloop. then i flashed the stock rom ( i have already flashed it many time with full precaution) process went ok but now phone is not booting , no light , no charging when i connect it to flash again it gets recognised and flashing goes ok again but still no sign of life whatsoever. when i connect it to pc i can hear usb on/off sound. plz help me UNBRICK my device
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following thread since there's limited threads for this device at this time.
https://forum.xda-developers.com/showthread.php?t=2872896
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.